Search NASA⌕ Search

SEARCH · Search NASA

Results for “Metallization process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Electrostatically tuned dimensional crossover in LaAlO 3 /SrTiO 3 heterostructures

We report a gate-tunable dimensional crossover in sub-micrometer-scale channels created at the LaAlO 3 /SrTiO 3 interface. Conducting channels of widths 10 nm and 200 nm are created using conducting atomic force microscope lithography. Under sufficient negative back-gate tuning, the orbital magnetoconductance of the 200 nm channel is strongly quenched, and residual signatures of low-field weak-antilocalization become strikingly similar to that of the 10 nm channel. The dimensional crossover for the 200 nm channel takes place near the conductance quantum G = 2e 2 /h. The ability to tune the dimensionality of narrow LaAlO 3 /SrTiO 3 channels has implications for interpreting transport in a variety of gate-tunable oxide-heterostructure devices.

36 MATERIALS SCIENCE↗

On the dynamic tensile strength of an FCC metal

The tensile response of ductile, polycrystalline metals is often accompanied by the formation of pores within the material, which coalesce and fail a plane within a metal. This large deformation process is broadly progressive, with a physical path consisting of nucleation, growth, coalescence, and failure, which occur individually over short periods of time. Thus distinct micro-mechanisms operate, each influenced by microstructure, loading path, and loading profile, which remains a significant challenge to represent and predict numerically at the macroscale. In a previous study, the influence of loading path on damage evolution in high-purity tantalum has been presented; in this paper, complimentary measurements are made on a pure, FCC copper. Samples were shock loaded to three different peak stresses using both symmetric impact, and two different composite flyer plate configurations, such that upon unloading, the three samples were subject to nearly identical tensile loading. The damage evolution in the soft-recovered copper samples was then quantified using optical metallography and electron-back-scatter diffraction. We shall compare metallurgical observations, velocimetry histories and simulations to discuss the dynamic failure mechanics observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization and nondestructive inspection of additively manufactured materials

Additively manufactured (AM) components often exhibit significant discontinuities and indications without a clear understanding of how they might affect the mechanical properties of a part during qualification and service. This uncertainty is unacceptable for the design and manufacturing of most aerospace components. Current research in both mechanical testing and nondestructive evaluation involves developing methods for characterizing and inspecting AM components as the use of such materials continues to rise. Although several AM manufacturing methods have been developed in recent decades, this paper focuses on AM production-ready processes for a direct metal laser sintering (DMLS) powder bed fusion machine and will provide background on Sandia National Laboratories’ research efforts in this area. Tensile bar samples manufactured using the DMLS powder bed fusion method were inspected in this study, and the results of ultrasonic spectroscopy for assessing internal flaws will be presented. A combination of material property evaluation, microstructural characterization, and nondestructive inspection techniques will also be described. Finally, the results obtained from these material evaluation methods assist in determining inspection limits and methods for qualifying AM materials.

36 MATERIALS SCIENCE↗

Sound speed measurements in shock-compressed cemented Tungsten carbides at pressures up to 100 GPa

To gain insights into thermodynamic states attained during shock compression of cemented tungsten carbide with 3.7 wt.% cobalt binder, we present results of longitudinal sound (release wave) speed measurements and their analysis at peak stresses up to 100 GPa (volumetric compression ratio ~ 15%). The sound speeds are determined using front-surface impact and release-wave overtake plate impact experimental configurations using laser interferometry. The measured sound speed data along with estimates for bulk sound speeds obtained using the fourth-order Birch-Murnaghan EoS and thermodynamics are used to determine the longitudinal moduli and shear moduli of shocked tungsten carbide at the various peak compression states attained in the experiments. Here, the longitudinal sound speeds were found to increase linearly with volume compression ratio from 6.97 ± 0.010 km/s at ambient conditions to 8.26 ± 0.156 km/s at a volume compression ratio of ~ 15%. The corresponding longitudinal elastic moduli also increase nearly linearly with the volume compression ratio but remain consistently lower than their theoretical predictions based on continuum models with no damage. Also, the sensitivity of shear moduli to pressure, as predicted by the Steinberg-Guinan model, is reduced substantially and the shear moduli of cemented WC with 3.7 wt.% Co remains nearly constant at ~ 310 GPa at the various peak compression stress states investigated in the present study.

36 MATERIALS SCIENCE↗

Modeling mechanical behavior of an additively manufactured metal structure with local texture variations: a study on model form error

Here, the repetitive rapid solidification that occurs in metal additive manufacturing (AM) processes creates microstructures distinctly different from wrought materials. Local variability in AM microstructures (either by design or unintentional) raises questions as to how AM structures should be modeled at the part-scale to minimize modeling error. The key goal of this work is to demonstrate a posteriori error estimation applied to an AM part. It is assumed that the actual microstructure is unknown and an approximate, spatially uniform material model is used. Error bounds are calculated for many reference models based on AM microstructures with elongated grain morphology and localized or global fiber textures during a post-processing step. The current findings promote confidence that a posteriori model form error estimation could be used effectively in mechanical performance simulations of AM parts to quickly obtain quantitative error metrics between an approximate model result and many microstructure-based reference models. The a posteriori error estimation introduces significant time savings compared to computing the full reference model solutions. Tight bounds on model form error are obtained when texture variations in the reference models occur on large length scales. For materials with property variation at small length scales, multi-scale error estimation techniques are needed to properly account for the many interfaces present between areas with different properties.

36 MATERIALS SCIENCE↗

First result of boronization assisted by the ICWC on EAST with full metal wall

Boron (B), a low-Z (atomic number) material, has been widely utilized in wall conditioning to improve plasma performance in fusion devices. In 2023, boronization was successfully conducted on EAST featuring an ITER-like tungsten divertor and fully metallic first wall. The process employed predischarge coating with carborane (C 2 B 10 H 12 ) as the working material, assisted by ion cyclotron wall conditioning (ICWC). After one time 12 g boronization, it was found the thickness of B film was approximately 120 nm. Post-boronization observations indicated that substantial hydrogen (H) release during initial plasma discharges compared with the consumed W/B wall, attributed to H co-deposition during the ICWC-boronization processing, which led to uncontrollable divertor neutral pressure and plasma density. The H/(H + D) ratio demonstrated a gradual reduction from ∼85% to 30% over more than 1850 s of deuterium plasma, with a cumulative injected energy of 2325 MJ. The B coating significantly enhanced the stored energy in plasma and improved confinement performance. The stored energy in plasma showed an increase of about 20%, primarily due to a reduction in impurity radiation, including oxygen (O) and heavy impurities such as tungsten (W), iron (Fe), and copper (Cu). The effective ion charge (Z eff ) decreased from 2.3 to 2.0. Following ICWC-boronization, the line-integrated radiation profile decreased by nearly 35% in the plasma core, plasma density and electron temperature exhibited an increase of ∼7% and 12% due to enhanced wall fueling and reduced impurity radiation. The lifetime of boronization, as evaluated by the line emissions from boron and other impurity radiation, was about 1700 s of deuterium plasma, with a cumulative injected energy of 2125 MJ on EAST. These findings provide significant insights for evaluating ICWC-boronization applicability in ITER with full W wall structure.

EAST↗

Long-range surface-plasmon-polariton excitation at the quantum level

We provide the quantum-mechanical description of the excitation of long-range surface-plasmon polaritons (LRSPPs) on thin metallic strips. The excitation process consists of an attenuated-reflection setup, where efficient photon-to-LRSPP wave-packet transfer is shown to be achievable. For calculating the coupling, we derive the first quantization of LRSPPs in the polaritonic regime. We study quantum statistics during propagation and characterize the performance of photon-to-LRSPP quantum state transfer for single-photons, photon-number states, and photonic coherent superposition states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First and second derivative of the wave function of the {sup 1}{Sigma}{sup +} states of the KH molecule

First and second derivative of the nonadiabatic coupling between the several {sup 1}{Sigma}{sup +} adiabatic states of the KH molecule considered from accurate diabatic and adiabatic data have been evaluated. Such derivatives of the electronic wave function are determined through a numerical differentiation of the rotational matrix connecting the diabatic and adiabatic representations. The first as well as the second derivative present many peaks related to ionic-neutral and neutral-neutral coupling between the {sup 1}{Sigma}{sup +} states. Such radial coupling has been exploited to calculate the first adiabatic correction, which corresponds to the diagonal term of the second derivative divided by the reduced mass, for the ground and some excited states of the KH molecule. The second adiabatic correction has been determined using the virial theorem. The first adiabatic correction was added to the adiabatic potential energy curves to redetermine the corrected spectroscopic constants and vibrational energy levels. The vibrational shift, which is the difference between the corrected and the adiabatic levels, has been calculated for X, A, C, and D {sup 1}{Sigma}{sup +} states of the KH molecule. A shift of some 10 cm{sup -1} is observed for some vibrational levels showing the breakdown of the Born-Oppenheimer approximation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of the conduction band spin-orbit splitting in $\mathrm{WSe_2}$ and $\mathrm{WS_2}$ monolayers

We have investigated charge tunable devices based on $\mathrm{WSe_2}$ and $\mathrm{WS_2}$monolayers encapsulated in hexagonal boron nitride. In addition to the well-known radiative recombination of neutral and charged excitons, stationary photoluminescence measurements highlight a weaker-intensity optical transition that appears when the monolayer is electrostatically doped with electrons. We have carried out a detailed characterization of this photoluminescence line based on its doping dependence, its variation as a function of the optical excitation power, its polarization characteristics, and its g factor measured under longitudinal magnetic field. We interpret this luminescence peak as an impurity-assisted radiative recombination of the intervalley negatively charged exciton (triplet trion). In addition to the standard direct recombination, the triplet trion has a second recombination channel triggered by elastic scattering off the short-range impurity potential. The energy difference between the emitted photons from these two possible recombination processes of the same triplet trion is simply the single-particle conduction band spin-orbit splitting Δ c . We measure Δ c = 12 ± 0.5 meV for the $\mathrm{WSe_2}$ monolayer and Δ c = 12 ± 1 meV for the $\mathrm{WS_2}$ monolayer. Here, these results demonstrate the importance of second-order exciton recombination processes in transition-metal dichalcogenide structures.

2-dimensional systems↗

Molecule-surface interaction from van der Waals-corrected semilocal density functionals: The example of thiophene on transition-metal surfaces

Semilocal density functional approximations are widely used. None of them can capture the long-range van der Waals (vdW) attraction between separated subsystems, but they differ remarkably in the extent to which they capture intermediate-range vdW effects responsible for equilibrium bonds between neighboring small closed-shell subsystems. The local density approximation (LDA) often overestimates this effect, while the Perdew-Burke-Ernzerhof (PBE) generalized gradient approximation (GGA) underestimates it. The strongly constrained and appropriately normed (SCAN) meta-GGA often estimates it well. All of these semilocal functionals require an additive nonlocal correction such as the revised Vydrov-Van Voorhis 2010 (rVV10) to capture the long-range part. This work reports adsorption energies and the corresponding geometry of aromatic thiophene (C 4 H 4 S) bound to transition-metal surfaces. The adsorption process requires a genuine interplay of covalent and weak binding and requires a simultaneously accurate description of surface and adsorption energies with the correct prediction of the adsorption site. All these quantities must come from well-balanced short- and long-range correlation effects for a universally applicable method for weak interactions with chemical accuracy. Here, our methods indicate that the correct interplay is not present in any combination of recent meta-GGA's and rVV10. The simple short-range damping of the vdW correction scheme that is practically successful in the combination of GGA's and vdW approximations is less transferable in SCAN+rVV10 or in the revised version, revSCAN+rVV10. In addition, we present accurate random-phase-approximation-quality adsorption energies from a model based on the one of Zaremba and Kohn.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Moving Beyond p-Type mc-Si: Quantified Measurements of Iron Content and Lifetime of Iron-Rich Precipitates in n-Type Silicon

N-type multicrystalline silicon (mc-Si) is a promising alternative to the dominant p-type mc-Si for solar cells because it combines the cost advantages of mc-Si while benefiting from higher tolerance to transition metal contamination. A detailed understanding of the relative roles of point defect and precipitated transition metals has enabled advanced processing and high minority carrier lifetimes in p-type mc-Si. This contribution extends that fundamental understanding to Fe contamination in n-type mc-Si, helping enable processing of this material into an economical and high-performance photovoltaic device. Finally, by directly correlating micro-photoluminescence-based minority carrier lifetime mapping and synchrotron-based micro-X-ray fluorescence mapping of Fe-rich precipitates, we develop a quantitative, physical understanding of the recombination activity of Fe-rich precipitates in n-type mc-Si.

36 MATERIALS SCIENCE↗

Exploiting Fixed Charge to Control Schottky Barrier Height in Si|Al 2 O 3 |MoO x – based Tunnel Diodes

The insertion of a tunneling atomic layer deposited (ALD) Al 2 O 3 film between MoO x and p-type Si has been studied to investigate Schottky barrier height tunability with varied negative fixed charge density. This work seeks to increase the hole-selectivity of MoO x -based contacts through manipulation of interface fixed charge. Fixed charge density and interface trap state densities are determined as a function of alumina processing conditions in metal-oxide-semiconductor capacitors (MOSCAPs). Schottky barrier heights were determined from Mott-Schottky analysis of tunnel diodes. An alumina deposition temperature of 80°C and post-deposition annealing at 425°C yielded the highest magnitude of negative fixed charge density (-3.5 × 10 12 q . cm –2 ). High deposition temperature and/or post-deposition annealing produced the lowest interface trap state density (1 × 10 12 eV -1 . cm –2 ). On p-type silicon, Schottky barrier height minimization was not clearly correlated with increasing fixed charge density. However, on n-type silicon, a significant increase in Schottky barrier height was evident (~0.8 eV to > 1 eV) and is attributed to the large negative fixed charge. Here, the findings from this work indicate that Schottky barrier height in carrier selective contacts can be tuned by electrostatic engineering of the SiO x |Al 2 O 3 interface.

aluminum oxide↗

Development of Solution Buffer Layers for RABiTS Based YBCO Coated Conductors

Abstract The main objective of this research is to find a suitable alternate solution based seed layer for the standard RABiTS three-layer architecture of physical vapor deposited CeO cap/YSZ barrier/Y O seed on Ni-5%W metal tape. In the present work, we have identified CeO buffer layer as a potential replacement for Y O seeds. Using a metal-organic deposition (MOD) process, we have grown smooth, crack-free, epitaxial thin films of CeO (pure and Zr, Cu and Gd-doped) directly on biaxially textured Ni-5W substrates in short lengths. Detailed XRD studies indicate that a single epitaxial CeO phase with slightly improved out-of-plane texture compared to the texture of the underlying Ni-W substrates can be achieved in pure, undoped CeO samples. We have also demonstrated the growth of YSZ barrier layers on pure CeO seeds using sputtering. Both sputtered CeO cap layers and MOD-YBCO films were grown epitaxially on these YSZ-buffered MOD-CeO /Ni-5W substrates. High critical currents per unit width, of 264 A/cm (critical current density, of 3.3 MA/cm ) at 77 K and 0.01 T was achieved for 0.8 m thick MOD-YBCO films grown on MOD-CeO seeds. These results indicate that CeO films can be grown directly on Ni-5W substrates and still support high performance YBCO coated conductors. This work holds promise for a route for producing low-cost buffer architecture for RABiTS based YBCO coated conductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On Developing One-Chip Integration of 1.2 kV SiC MOSFET and JBS Diode (JBSFET)

This paper presents the design, fabrication, and characterization of the SiC JBSFET (JBS diode integrated MOSFET). The fabrication of the JBSFET adopted a novel single metal, single thermal treatment process to simultaneously form ohmic contacts on n+, p+ implanted regions, and Schottky contact on the n- 4H-SiC epi-layer. The presented SiC JBSFET uses 40% smaller wafer area because the diode and MOSFET share the edge termination as well as the current conducting drift region. Here, the proposed single chip solution of MOSFET/JBS diode functionalities eliminates the parasitic inductance between separately packaged devices allowing a higher frequency operation in a power converter.

42 ENGINEERING↗

Impact of Additive Manufacturing on Internal Cooling Channels With Varying Diameters and Build Directions

Abstract The use of additive manufacturing (AM) processes, such as direct metal laser sintering, provides the design freedom required to incorporate complex cooling schemes in gas turbine components. Additively manufactured turbine components have a range of cooling feature sizes and, because of the inherent three-dimensionality, a wide range of build angles. Previous studies have shown that AM built directions influence internal channel surface roughness that, in turn, augment heat transfer and pressure loss. This study investigates the impact of AM on channel feature size and builds direction relative to tolerance, surface roughness, pressure losses, and convective cooling. Multiple AM coupons were built from Inconel 718 consisting of channels with different diameters and a variety of build directions. An experimental rig was used to measure pressure drop to calculate friction factor and was used to impose a constant surface temperature boundary condition to collect Nusselt number over a range of Reynolds numbers. Significant variations in surface roughness and geometric deviations from the design intent were observed for distinct build directions and channel sizes. These differences led to notable impacts in friction factor and Nusselt number augmentations, which were a strong function of build angle.

Engineering↗

Convection in Scaled Turbine Internal Cooling Passages With Additive Manufacturing Roughness

Abstract Additive manufacturing processes, such as direct metal laser sintering (DMLS), enable the creation of novel turbine cooling internal passages and systems. However, the DMLS method produces a significant and unique surface roughness. Previous work in scaled passages analyzed pressure losses and friction factors associated with the rough surfaces, as well as investigated the velocity profiles and turbulent flow characteristics within the passage. In this study, the heat transfer characteristics of scaled additively manufactured surfaces were measured using infrared (IR) thermography. Roughness panels were CNC machined from plates of aluminum 6061 to create near isothermal roughness elements when heated. Fluid resistance differences between the aluminum roughness panels and roughness panels constructed from ABS plastic using the same roughness patterns from McClain et al. (2020, “Flow in a Simulated Turbine Blade Cooling Channel With Spatially Varying Roughness Caused by Additive Manufacturing Orientation,” ASME Turbo Expo 2020, Turbomachinery Technical Conference and Exposition, Virtual Conference, Sept. 21–25, GT2020-16069) were investigated. Finally, the overall thermal performance enhancements and friction losses were assessed through the calculation of surface averaged “global thermal performance” ratios. The global thermal performance characterizations indicate results in-line with those found for traditional commercial roughness and slightly below traditional internal passage convection enhancement methods such as swirl chambers, dimples, and ribs. The passages investigated in this study do not include compressibility effects or the long-wavelength artifacts and channel geometric deviations observed by Wildgoose et al. (2020, “Impact of Additive Manufacturing on Internal Cooling Channels with Varying Diameters and Build Directions,” ASME Turbo Expo 2020, Turbomachinery Technical Conference and Exposition, Virtual Conference, Sept. 21–25, GT2020-15049). However, the results of this study indicate that, based on the roughness augmentation alone, artificial convective cooling enhancers such as turbulators or dimples may still be required for additively manufactured turbine component cooling.

Engineering↗

A Survey of Thermal Sensing Application in Additive Manufacturing

Industry 4.0 represents a significant change in manufacturing with the inclusion of such technologies as additive manufacturing and data analytics. In support of these changes, infrared thermal imaging (IR) and very-near infrared (VNIR) have proven invaluable in numerous applications related to additive manufacturing. In this review, these applications will be presented as they relate to polymer and metal-based additive manufacturing processes. Applications including in-situ characterization, post-build analysis, experimental setups, modeling, and machine learning will be covered. With a general overview complete, the review will conclude with a discussion of challenges identified throughout the literature and thoughts on future trends.

Borish, Michael↗