Search NASA⌕ Search

SEARCH · Search NASA

Results for “Methods in superconductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Morphology of TiN thin films grown on MgO(001) by reactive dc magnetron sputtering

Thin TiN films were grown by reactive dc magnetron sputtering on single-crystalline MgO(001) substrates at a range of temperatures from room temperature to 600 deg. C. Structural characterization was carried out using x-ray diffraction and reflection methods. TiN films grow epitaxially on the MgO substrates at growth temperatures of 200 deg. C and above. The crystal coherence length determined from Laue oscillations and the Scherrer method agrees with x-ray reflection thickness measurements to 6% and within 3% for growth temperatures of 200 and 600 deg. C, respectively. For lower growth temperatures the films are polycrystalline but highly textured and porous.

36 MATERIALS SCIENCE↗

Structural, Electronic, Magnetic, and Optical Properties of Half-Heusler Alloys RuMnZ (Z = P, As): a First-Principle Study

Half-Heusler alloys RuMnZ (Z = P, As ) are studied in the framework of Density Functional Theory (DFT). Structural, electronic, magnetic, and optical properties are calculated and analyzed using the WIEN2k simulation code. All the calculations are done using the full potential linearized augmented plane wave (FP-LAPW) method. Equilibrium lattice parameters are found to be in the range 5.5–5.6 Å. Band gaps of the compounds and density of states (DoS) analysis reveal that the minority spin-down states are semi-conducting while the majority spin-up states are conducting confirming the half-metallic nature of the compounds. Hence, at Fermi level, states are 100 % polarized. The value of the total magnetic moment is found to be 2, i.e., M{sub Tot} = 2μ{sub B}. Several optical properties, including dielectric function, reflectivity, refractive index, conductivity, and absorption coefficient are calculated as well. It is revealed from the imaginary part of the dielectric function that the compounds are optically metallic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen sorption in titanium alloys with a symmetric {Sigma}5(310) tilt grain boundary and a (310) surface

The hydrogen sorption in intermetallic B2 TiM (M = Ni, Co, Pd) with a symmetric {Sigma}5(310) tilt grain boundary and a (310) surface is studied by density functional theory methods. The effect of hydrogen on the electronic characteristics of the alloys is analyzed as a function of a sorption position at the interfaces. The hydrogen sorption energy is shown to depend on the local environment of hydrogen; on the whole, hydrogen at the interfaces prefers titanium-rich positions. The hydrogen sorption energy in metal-rich positions decreases when the d shell of the second alloy component is filled with electrons. The grain-boundary energy, the surface energy, and the hydrogen segregation energies to the interfaces are calculated. Hydrogen sorption in titanium alloys is shown to decrease Griffith work and to favor brittle fracture along tilt grain boundaries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formability analysis of aluminum alloy sheets at elevated temperatures with numerical simulation based on the M-K method

The effect of temperature on formability of aluminum alloy sheet is studied by developing the Forming Limit Diagrams, FLD, for aluminum alloy 3000-series using the Marciniak and Kuczynski technique by numerical simulation. The numerical model is conducted in LS-DYNA and incorporates the Barlat's YLD2000 anisotropic yield function and the temperature dependant Bergstrom hardening law. Three different temperatures; room temperature, 250 deg. C and 300 deg. C, are studied. For each temperature case, various loading conditions are applied to the M-K defect model. The effect of the material anisotropy is considered by varying the defect angle. A simplified failure criterion is used to predict the onset of necking. Minor and major strains are obtained from the simulations and plotted for each temperature level. It is demonstrated that temperature improves the forming limit of aluminum 3000-series alloy sheet.

36 MATERIALS SCIENCE↗

Investigation of the pressure dependent thermodynamic and elastic properties of 1,3,5-triamino-2,4,6-trinitrobenzene using dispersion corrected density functional theory

The influence of pressure on the thermodynamic, structural, and elastic properties of the 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) molecular crystal at T = 0 is systematically studied. Calculations are carried out using density functional theory methods in a plane wave basis set with dispersion corrections for the exchange-correlation part of total energy, and ultrasoft pseudopotentials. The equilibrium unit cell parameters, the cold compression curve in the pressure range of 0–50 GPa and the sound speeds are computed. The effect of finite pressure on the molecular structure of TATB is elucidated from the analysis of relative changes in the intra- and intermolecular geometrical parameters. For the first time, the full set of elastic constants of this crystal at zero and non-zero pressures is determined from ab initio calculations. The resulted structural, elastic, and acoustic properties of TATB are shown to be in a good agreement with available experimental and theoretical data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of dielectric medium on benzylidene aniline: A computational analysis

A computational analysis of ordering in N-(p-n-ethoxy benzylidene)-p-n-butyl aniline (2O.4) was performed based on quantum mechanics and intermolecular forces. The atomic charge and dipole moment at atomic centre were evaluated using the all valance electron CNDO/2 method. The modified Rayleigh-Schrodinger perturbation theory and multicentre-multipole expansion method were employed to evaluate long-range intermolecular interaction, while a 6-exp potential function was assumed for short-range interactions. The total interaction energy values obtained in these computations were used as input for calculating the probability of each configuration in a noninteracting and nonmesogenic solvent (i.e., benzene) at room temperature (300 K) using the Maxwell-Boltzmann formula. The molecular parameter of 2O.4, including the total energy, binding energy, and total dipole moment were compared with N (p-n-butoxy benzylidene)-p-n-ethyl aniline (4O.2). The present article offer theoretical support to the experimental 'observations, as well as a new and interesting way of looking at liquid crystalline molecule in a dielectric medium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Geometrical Structures and Magnetic Properties of Charged Aluminum-Doped Platinum Clusters: Aluminum Occupied High Coordination Site

The most stable states of neutral and charged Pt{sub n}Al (n = 1 − 8) clusters have been performed using DFT methods. All the most stable structures of neutral and charged Pt{sub n}Al clusters can be obtained by substituting a Pt atom with an Al atom except Pt{sub 7}Al and the Al atom occupies the vertex position with lager coordination number. The Pt{sub 5}, Pt{sub 4,6}Al, Pt{sub 3}Al{sup +}, and Pt{sub 6}Al{sup −} clusters have higher local relative stability and can be seen as “magic clusters.” The fragmentation energy is the largest when a Pt atom is bonded with an Al atom. The average magnetic moments of Pt{sub n+ 1} cluster reduce due to the addition of Al atoms. The static polarizability has been studied in this paper.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A First Principle Study of Half-Heusler Compounds CrTiZ (Z = P, As)

Half-Heusler compounds CrTiZ (Z = P, As) are studied in the framework of Density Functional Theory (DFT). Structural, mechanical, elastic, electronic, magnetic, and optical properties are derived using first principles. The full-potential linearized augmented plane wave (FP-LAPW) method is used for these investigations as implemented in the WIEN2k simulation package. We have found that the equilibrium lattice parameters are in the range 5.5–5.9 Å. Small band gaps of 0.5–0.6 eV in the minority spin-down states are observed. On the other hand, in the majority spin-up states, there is no band gap. Hence, the compounds are of half-metallic nature, having 100 % polarization at Fermi level. Comparatively, a higher total magnetic moment of ∼ 3μ{sub B} is found for both the compounds. Furthermore, optical properties are derived using dielectric function. Reflectivity, refractive index, conductivity and absorption coefficient are calculated. It is revealed from the imaginary part of the dielectric function that the compounds are optically metallic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling of Phase Transitions of Graphites to Diamond-Like Phases

The method of the density functional theory is used to study structural transformations between graphites and diamond-like phases. The calculations have been carried out in two approximations: a local density approximation and a generalized gradient approximation. It is found that the phase transitions of hexagonal graphene layers to a cubic diamond and diamond-like phases must occur at uniaxial compressions of ~57–71 GPa, whereas some diamond-like phases can be obtained from tetragonal graphene layers at significantly lower pressures of 32–52 GPa. The X-ray diffraction patterns have been calculated for the phase transition of graphite I4{sub 1}/amd to tetragonal LA10 phase that takes place at the minimum pressure that can be used for experimental identification of these compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical Properties of Boron-Doped Gallium Selenide

The electronic-absorption and luminescence spectra and the kinetics of relaxation of photocurrent in GaSe single crystals and thin films doped with boron atoms are experimentally investigated. Crystals are doped either in the course of synthesis or upon growing single crystals by the Bridgman method. Thin GaSe films are obtained by thermal evaporation of the compound preliminarily doped with boron. An absorption band with the maximum at λ = 925 nm, which is attributed to boron contaminations, is revealed from the comparison of the electronic-absorption spectra of a GaSe crystal and thin films doped with boron. When the crystals are excited with Nd:YAG laser pulses of a duration of 12 ns, it is established that recombination of nonequilibrium current carriers in pure crystals occurs through rapid and slow recombination channels and in crystals doped with boron only through rapid channels. In the region near λ = 932 nm, photoluminescence is observed in the crystals doped with boron, and its half-bandwidth is 15 Å.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi-mode analysis of surface losses in a superconducting microwave resonator in high magnetic fields

This paper reports on a surface impedance measurement of a bulk metal niobium–titanium superconducting radio frequency (SRF) cavity in a magnetic field (up to 10 T). Here, a novel method is employed to decompose the surface resistance contributions of the cylindrical cavity end caps and walls using measurements from multiple TM cavity modes. The results confirm that quality factor degradation of a NbTi SRF cavity in a high magnetic field is primarily from surfaces perpendicular to the field (the cavity end caps), while parallel surface resistances (the walls) remain relatively constant. This result is encouraging for applications needing high Q cavities in strong magnetic fields, such as the Axion Dark Matter eXperiment because it opens the possibility of hybrid SRF cavity construction to replace conventional copper cavities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Structural, Electronic, Magnetic and Optical Investigations of Half-Heusler Compounds YZSb (Z = Cr, Mn): FP-LAPW Method

Half-Heusler compounds YZSb (Z = Cr, Mn) are theoretically explored in the framework of density functional theory (DFT). We have investigated a number of different properties with the help of the WIEN2k simulation package. Equilibrium lattice constants fall in the range 6.0–7.0 Å for both compounds. Elastic properties are also studied and it is found that the compound YCrSb is of brittle and YMnSb is of ductile nature as indicated by a number of parameters including Cauchy pressure, Pugh’s ratio and Poisson’s ratio. Electronically, these compounds are found to be half-metals as their spin-up states are semiconducting and hence 100% spin polarized at the Fermi level while spin-down states are conducting. The total magnetic moments are equal to 4μ{sub B} and 3.15μ{sub B} for YCrSb and YMnSb, respectively. The optical properties including dielectric function, reflectivity, refractive index, conductivity and absorption coefficients are calculated and discussed. Optical characteristics of the compounds hint that they are more active in the infrared region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase diagram of spin-(1/2) bosons in a one-dimensional optical lattice

Systems of two coupled bosonic species are studied using mean field theory and the quantum Monte Carlo method. The phase diagram is characterized on the basis of both the mobility of the particles (Mott insulating or superfluid) and whether or not the system is magnetic (different populations for the two species). The phase diagram is shown to be population balanced for negative spin-dependent interactions, regardless of whether it is insulating or superfluid. For positive spin-dependent interactions, the superfluid phase is always polarized, and the two populations are imbalanced. However, the Mott-insulating phase with even commensurate filling always has balanced populations. In contrast, the Mott phase with odd commensurate filling has balanced populations in a very strong interaction and polarizes as the interaction gets weaker while still in the Mott phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Monte Carlo Study of the Mixed-Spin (1/2, 2) Ferrimagnetic Ising System on a Honeycomb Lattice

By means of the Monte Carlo method, we have simulated the mixed-spin-1/2 and spin-2 Ising ferrimagnetic system on a honeycomb lattice. We studied the variations of the magnetization as functions of the crystal field and the temperature and obtained the phase diagram of the system for various crystal field values. We have found that the system cannot display a point of compensation if we consider only nearest-neighbor interactions and the crystal field effect. Also, the tricritical point does not exist. To the best of our knowledge, this system has never been studied using the Monte Carlo method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparative S/TEM study of superconducting Ta quantum resonators by wet and dry etching types

Superconducting resonators play a pivotal role in various quantum technology applications, such as quantum computing and high-frequency communication systems. The performance of these resonators is closely tied to the properties of the superconducting films used in their fabrication. Here, in this study, we investigated the impact of wet and dry etching on tantalum (Ta) films leveraging advanced scanning transmission electron microscopy-based characterization methods and examined the morphological, chemical, and strain changes caused by the etching processes. Consequently, we report the significant differences between the two etching methods, with dry etching resulting in straight slanted sidewalls and a thinner oxidized layer, while wet etching produced curved sidewalls and undercuts. Both methods led to the formation of a residual Ta wedge at the lower part of the sidewall, causing lattice deformation, which could adversely influence the homogeneous operations of superconducting devices. These insights enhance our understanding of how etching influences superconducting films, offering valuable guidance for optimizing resonators and related devices. Our findings mark a significant stride in advancing quantum technologies and high-frequency communication by enhancing our practical understanding of superconducting material fabrication.

36 MATERIALS SCIENCE↗

Efficient surface plasmon amplification in gain-assisted silver nanotubes and associated dimers

SPASER (surface plasmon amplification by stimulated emission of radiation) properties in active SiO{sub 2}–Ag nanotubes and associated dimers have been investigated by using the scattering theory and the finite element method. In the active Ag nanotube, as the gain coefficient of the core increases to a critical value, a super-resonance occurs. The SPASER phenomenon also can be found in the active Ag nanotube dimer. The strong couplings between two nanotubes lead to larger gain threshold for the active Ag nanotube dimer compared with the active Ag nanotube. At the super-resonance, the maximal surface enhanced Raman scattering factor at the “hot spot” in the active Ag nanotube dimer can achieve about 8 × 10{sup 18}, which is large enough for single molecule detection. Furthermore, with increasing the separation between two Ag nanotubes, the gain threshold value for the super-resonance of the active Ag nanotube dimer decreases, while the corresponding super-resonance wavelength increases first and then decreases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

25%Eu : KGd(WO{sub 4}){sub 2} laser crystal: spectroscopy and lasing on the {sup 5}D{sub 0}{yields}{sup 7}F{sub 4} transition

25%Eu : KGd(WO{sub 4}){sub 2} crystal is grown by a modified Czochralski method and its spectral and lasing properties are studied. Generation of stimulated emission in this crystal on the {sup 5}D{sub 0}{yields}{sup 7}F{sub 4} transition of the Eu{sup 3+} ion is obtained, as far as we know, for the first time. The laser operates at room temperature at a wavelength of {approx}703 nm under pumping into the {sup 7}F{sub 0}{yields}{sup 5}D{sub 1} absorption band of the europium ion by the second harmonic of a Q-switched Nd : KGW laser ({lambda}{sub pump}= 533.6 nm). With a 9.4-mm-long active element, the output energy in the free-running regime reached 244 {mu}J, while the optical efficiency was 1.5%. (lasers and active media)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First Principle Mechanical and Thermodynamic Properties of Some TbX (X = S, Se) Compounds

The mechanical and thermodynamic results of some terbium chalcogenides, TbX (X = S, Se) compounds have been examined using full-potential linear augmented plane wave (FP-LAPW) method based on density functional theory. The local spin density approximation with Hubbard potential (LSDA+U) has been used for proper treatment of 4f-electrons of Tb. The magnetic moment of TbS and TbSe was calculated to be 5.44μ{sub B} and 5.57μ{sub B}, respectively. The ground state properties such as lattice parameter, bulk modulus, and pressure derivative of bulk modulus were obtained and found in good agreement with already available theory and experiment results. The mechanical properties such as Young modulus (E), shear modulus (G), Poisson ratio (υ), Cauchy pressure and B/G ratio were also predicted. Further, in thermodynamic properties, Debye temperatures (θ{sub D}), specific heats at constant volume(C{sub V}), thermal expansion co-efficient (α), and entropies (S) and their behavior with high temperature(0–1200 K) and pressure (0–50 GPa) were also predicted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗