Search NASA⌕ Search

SEARCH · Search NASA

Results for “PASSIVATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Passive Longitudinal-Phase-Space Tailoring of Non-Ultrarelativistic Beams with Dielectric-Lined Waveguides

To date conventional use of dielectric-lined waveguides (DLWs) has mainly concerned high-gradient acceleration. In this paper we investigate an alternative use of such waveguides to impressed wakefield-induced energy correlations on non-ultra-relativistic beams. These correlations are shown to produce density modulations as the beam drifts in a free space. We explore several schemes with a single or multiple DLW structures which can lead to passive compressions and to the formation of sub-picosecond bunch trains. We finally suggest the possible use of multiple structures to bunch the beam at higher frequencies using a scheme similar to a two-stage echo enabled harmonic generation.

43 PARTICLE ACCELERATORS↗

Passive wavelength tuning and multichannel photonic coupling using monolithically integrated vertical microresonators on ridge waveguides

The passive tuning of the resonant coupling wavelength in a SiN x vertical microring coupler (VμRC) monolithically integrated on a ridge waveguide by engineering the structural parameters of the VμRCs is experimentally demonstrated and theoretically verified. Multi-channel photonic coupling is achieved by integrating two different VμRCs on a single ridge waveguide. This work represents here a critical step to 3D photonic integration using VμRCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compensation and hydrogen passivation of magnesium acceptors in β-Ga 2 O 3

Magnesium-doped gallium oxide may be utilized as a semi-insulating material for future generations of power devices. Spectroscopy and hybrid functional calculations were used to investigate defect levels in Czochralski-grown β-Ga 2 O 3 . Substitutional Mg dopants act as deep acceptors, while substitutional Ir impurities are deep donors. Hydrogen-annealed Ga 2 O 3 :Mg shows an IR peak at 3492 cm –1 , assigned to an O-H bond-stretching mode of a neutral MgH complex. As a result, despite compensation by Ir and Si and hydrogen passivation, high concentrations of Mg (10 19 cm –3 ) can push the Fermi level to mid-gap or lower.

74 ATOMIC AND MOLECULAR PHYSICS↗

Reversibility, pattern formation, and edge transport in active chiral and passive disk mixtures

In this study, we numerically examine mixtures of circularly moving and passive disks as a function of density and active orbit radius. For low or intermediate densities and/or small orbit radii, the system can organize into a reversible partially phase separated labyrinth state in which there are no collisions between disks, with the degree of phase separation increasing as the orbit radius increases. As a function of orbit radius, we find a divergence in the number of cycles required to reach a collision-free steady state at a critical radius, while above this radius, the system remains in a fluctuating liquid state. For high densities, the system can organize into a fully phase separated state that is mostly reversible, but collisions at the boundaries between the phases lead to a net transport of disks along the boundary edges in a direction determined by the chirality of the active disk orbits. We map the dynamic phases as a function of density and orbit radii and discuss the results in terms of the reversible-irreversible transition found in other periodically driven non-thermal systems. Finally, we also consider mixtures of circularly driven disks and ac driven disks where the ac drive is either in or out of phase with the circular motion and find a rich variety of pattern forming and reentrant disordered phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal conductance of aluminum oxy-fluoride passivation layers

Here, the thermal properties of plasma-generated aluminum oxyfluoride passivation layers at the surface of aluminum thin films are measured. The oxyfluoride layers are generated using plasmas produced in mixtures of NH 3 and SF 6 to simultaneously remove oxygen and add fluorine to the aluminum surface, an alternative approach to the more conventional two-step methods that utilize HF treatments to remove the native oxide followed by metal-fluoride (e.g., MgF 2 , LiF, and AlF 3 ) thin film deposition that serves to protect the aluminum surface from further oxidation. Here, the change in thermal properties of the layers as a function of plasma processing time is determined. A significant reduction in thermal boundary conductance is measured with the increasing treatment time, which can be related to the increasing fluorine content in the layers. Acoustic reflection measurements suggest this reduced thermal boundary conductance is related to lower bonding strength to aluminum with increasing fluorine.

36 MATERIALS SCIENCE↗

Origins of hydrogen that passivates bulk defects in silicon heterojunction solar cells

Silicon heterojunction solar cell fabrication incorporates a significant amount of hydrogen into the silicon wafer bulk, and the amount of injected hydrogen is comparable to that introduced by silicon nitride films during a high-temperature firing step. In this work, the origins of the hydrogen injected during heterojunction cell processing have been identified. We demonstrate that the hydrogen plasma treatment that is routinely included to improve surface passivation considerably increases the hydrogen concentration in the wafers. We also show that the hydrogenated amorphous silicon i/p+ stack is more effective than the i/n+ stack for bulk hydrogen incorporation, and both are more effective than intrinsic films alone.

Sun, Chang (ORCID:0000000282140458)↗

The inductively driven transmission line: A passively coupled device for diagnostic applications on the Z pulsed power facility

The inductively driven transmission line (IDTL) is a miniature current-carrying device that passively couples to fringe magnetic fields in the final power feed on the Z Pulsed Power Facility. The IDTL redirects a small amount of Z’s magnetic energy along a secondary path to ground, thereby enabling pulsed power diagnostics to be driven in parallel with the primary load for the first time. IDTL experiments and modeling presented here indicate that IDTLs operate non-perturbatively on Z and that they can draw in excess of 150 kA of secondary current, which is enough to drive an X-pinch backlighter. Further experiments show that IDTLs are also capable of making cleaner, higher-fidelity measurements of the current flowing in the final feed.

47 OTHER INSTRUMENTATION↗

Nitrogen plasma passivated niobium resonators for superconducting quantum circuits

Microwave loss in niobium metallic structures used for superconducting quantum circuits is limited by a native surface oxide layer formed over a timescale of minutes when exposed to an ambient environment. Here, in this work, we show that nitrogen plasma treatment forms a niobium nitride layer at the metal–air interface, which prevents such oxidation. X-ray photoelectron spectroscopy confirms the doping of nitrogen more than 5 nm into the surface and a suppressed oxygen presence. This passivation remains stable after aging for 15 days in an ambient environment. Cryogenic microwave characterization shows an average filling-factor-adjusted two-level-system loss tangent Fδ TLS of (2.9±0.5)·10 –7 for resonators with a 3 μm center strip and (1.0±0.3)·10 –7 for a 20 μm center strip, exceeding the performance of unpassivated samples by a factor of four.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dopant Compensation within the Intrinsic Poly-Si Isolation Region in Poly-Si/SiOx Passivated IBC Si Solar Cells

We report on the effect of dopant compensation within intrinsic poly-Si regions between p- and n-type fingers of poly-Si/SiOx passivated interdigitated back contact (IBC) solar cells using intrinsic poly-Si as the isolation region between the doped poly-Si fingers. First, we show that dopants from the doped fingers contaminate the intrinsic gap, resulting in doping of the entire intrinsic gap and overlap of the dopant tails from each finger. Next, we show that despite this doping across the gap, shunting between the doped fingers does not occur. We show that this is a result of trap-assisted compensation creating a highly resistive intrinsic region, preventing shunt. We simulate shunt resistance across the gap based on local carrier concentration and deep trap density. We show that trap defects within the poly-Si enhance compensation between the dopant tails. We experimentally confirm these predictions by scanning spreading resistance microscopy of the gap showing ~20 um domain with resistivity ~10^7 ..omega.. cm. Additionally, Kelvin probe force microscopy are compared to finite element simulations which result in the same approximate shape for potential profile, indicating diode behavior across the isolation region. These results demonstrate the powerful effect that trap defects have within the poly-Si isolation region and suggest that precision patterning is not as essential as once thought.

dopant compensation↗

Electrical Analysis of Pulsed Laser Annealed Poly-Si: Ga/SiOx Passivating Contacts

In this contribution, we examine Ga hyper-doped poly-Si/SiOx contacts realized by pulsed laser melting (PLM). Here, we use Ga as a novel p-type dopant and B as a conventional dopant to induce non-equilibrium doping using an excimer laser. We perform simulations to visualize the maximum melt depth profiles within the poly-Si, with a goal of distributing dopants close to the tunneling oxide, but at the same time preserving the passivation. Hall measurements show that sheet resistance for B is lower than Ga due to its higher solid solubility limit in Si. After comparing the Hall active dopant concentration with the chemical concentration obtained by SIMS measurement, we show nearly 100% activation B activation reaching 10^21 cm-3, while only ~20% activation for Ga. Nevertheless, we achieve active doping concentrations of Ga in poly-Si six times higher than its solid solubility limit in Si (~10^19 cm-3). We compare our Hall mobilities with values in the literature for c-Si and show that B mobilities in laser-treated poly-Si are close to that of the literature value for B, while Ga mobilities are lower, possibly due to additional scattering channels within grain boundaries and deformed lattice. We also compare our results on PLM samples with conventional furnace annealed samples, and we show much higher percent activation and mobilities. Previously, we showed a low contact resistivity of 35.5 +/- 2.4 m..omega..cm2. Here, we further confirm this result by scanning spreading resistance microscopy and Kelvin force nanoprobe microscopy. We demonstrate that our poly-Si: Ga/nCz contact exhibits large drift and diffusion currents under normal cell operating voltage, which widens the laser processing window for a good metal/poly-Si/c-Si contact.

high-efficiency solar cells↗

Enhanced minority carrier lifetime in bulk hydrogen-passivated InAsSbBi

We investigate the bulk passivation of the dilute bismide alloy InAsSbBi by plasma-assisted hydrogenation. InAsSbBi is of significant interest for mid- to long-wave infrared photodetection due to its bandgap flexibility and potential integration with heterostructured photodetector architectures. Epitaxially grown InAsSbBi samples are characterized by photoluminescence and time-resolved photoluminescence measurements for a range of hydrogenation conditions. Increases in the minority carrier lifetime of over 3× are reported, with no degradation over a period of months following the treatment. Photoluminescence measurements confirm that the hydrogenation process improves the InAsSbBi optical properties. These results offer a path toward the improved performance of InAsSbBi-based photodetectors and potentially other narrow bandgap semiconductor materials and material systems.

Physics↗

Transversely diode-pumped passively Q-switched erbium glass laser emitter

The properties of a laser diode array-pumped passively Q-switched ytterbium-erbium glass laser emitter are studied. It is found experimentally that the maximum output energy is achieved when the diameter of the TEM{sub 00} mode is 0.65-0.77 of the transverse size of the active element. By using two 100-W linear laser diode arrays with the output power not exceeding 70% of the maximum power, 5 mJ was achieved in a 50-ns diffraction-limited single pulse for the efficiency (with respect to the pump radiation energy) of 1.35%. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Jitter and the minimal pulse repetition rate of a diode-pumped passively Q-switched solid-state laser

The jitter of radiation pulses from diode-pumped passively Q-switched Nd{sup 3+}:Y{sub 3}Al{sub 5}O{sub 12} (Nd:YAG) and Nd{sup 3+}:Ca{sub 3}Ga{sub 2}Ge{sub 3}O{sub 12} (Nd:CGGG) crystal lasers is studied. It is found that the jitter j depends on the laser pulse repetition rate f as j = A/f{sup {gamma}}. It is shown that the minimal pulse repetition rate f{sub L} of the laser is determined by the jitter parameters A and {gamma} and is equal to A{sup 1/({gamma}-1)}. For the Nd:YAG and Nd:CGGG lasers, f{sub L} was 14 Hz and 5 Hz, respectively. (control of laser radiation parameters)

36 MATERIALS SCIENCE↗

Pulsed oscillation of a diode-pumped passively Q-switched Ca{sub 3}Ga{sub 2}Ge{sub 3}O{sub 12}:Nd{sup 3+} laser

Pulsed oscillation of a diode-pumped passively Q-switched Nd{sup 3+}:Ca{sub 3}Ga{sub 2}Ge{sub 3}O{sub 12} (Nd:CGGG) solid-state laser is studied. For the absorbed pump power of 0.8 W, the pulse energy was 3.5 {mu}J and the pulse rise time, duration and decay time were 6, 11 and 13 ns, respectively. The pulse repetition rate varied from 3 to 13 kHz when the absorbed pump power was changed from 0.45 to 1 W. It is shown that all the temporal parameters of the generated pulse decrease with increasing the absorbed pump power. The sensitivities of these parameters and the pulse repetition rate to changes in the absorbed pump power and the laser resonator length are measured. The results of the research are compared with the corresponding results for the pulsed Nd:YAG laser operating under the same conditions. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Picosecond pulse generation in a passively mode-locked Bi-doped fibre laser

CW passive mode locking is achieved in a bismuth-doped fibre laser using a semiconductor saturable absorber mirror optimised for operation in the range 1100-1200 nm. The pump source is a cw ytterbium fibre laser (1075 nm, maximum output power of 2.7 W), and the pulse parameters can be tuned by varying the intracavity group velocity dispersion using a diffraction grating pair. Stable laser pulses are obtained with a duration down to {tau}{sub p} {approx} 1.1 ps. (control of laser radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the possibility of increasing the pulse energy of a passively Q-switched erbium glass minilaser

A simple method to increase the output energy of a passively Q-switched erbium glass laser is proposed. Using the amplitude modulation of losses at the active element face, the fundamental mode was reliably suppressed and the laser operated in a selected higher-order mode. The output energy was experimentally increased by a factor of 2.1, and the range of allowable pump energy instability was extended threefold. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-peak power, passively Q-switched, composite, all-polycrystalline ceramic Nd:YAG/Cr{sup 4+}:YAG lasers

High-peak power, passively Q-switched, composite Nd : YAG/Cr{sup 4+} : YAG lasers consisting of all-polycrystalline bonded Nd:YAG and Cr{sup 4+}:YAG ceramics are developed, and two applications of such lasers are discussed. A 1.1-at. %-doped Nd:YAG/Cr{sup 4+}:YAG ceramic laser is fabricated, which is quasi-cw pumped by a diode laser in the Hz-range, delivering laser pulses of 2.5-mJ energy and 1.9-MW peak power. By frequency doubling the laser output in a LiB{sub 3}O{sub 5} (LBO) nonlinear crystal at room temperature, 0.36-mJ, 0.3-MW green laser pulses with 27 % conversion efficiency are produced at 532 nm. Furthermore, a highly doped (1.5-at. %) Nd:YAG/Cr{sup 4+}:YAG ceramic laser operates successfully in the range of pulse repetition rates from 50 to 500 Hz, yielding 0.8-to-1.0 mJ pulses with a peak power around 1 MW. The laser output beam is amplified in a master-oscillator - power-amplifier (MOPA) system to generate laser pulses with 11-mJ energy at a 250-Hz repetition rate. (lasers)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Control of the repetition rate and reduction of the jitter of the pulses of passively Q-switched solid-state miniature lasers using periodic diode-pump modulation

Based on an extended point laser model, the lasing of passively Q-switched Nd : YAG minilasers has been numerically analysed. We have shown that periodically modulated diode pump may be used to control the pulse repetition rate and substantially reduce the timing pulse jitter. When the pump is modulated with rectangular pulses, switching from a high pump level to a low one upon generation of a successive laser pulse improves the stability of the pulse repetition rate relative to variations of the average pump level and broadens the range of repetition frequencies whereby they may be locked to the pulse modulation frequency. The feasibility of lowering the timing jitter and locking the pulse repetition frequency to the pump modulation frequency has been confirmed experimentally. For repetition rates {approx}1 kHz, the relative standard deviation of the pulse-repetition period is reduced from several percent for a continuous pumping to 0.06 % by applying ''truncation'' of modulation pulses. The experimental results agree well with simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗