Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Cooperative Ru(4 d )–Ho(4 f ) magnetic ordering and phase coexistence in the 6 H perovskite multiferroic Ba 3 HoRu 2 O 9

We report cooperative magnetic orderings in a 6H-perovskite multiferroic system, Ba 3 HoRu 2 O 9 , via comprehensive neutron powder diffraction measurements. This system undergoes long-range antiferromagnetic ordering at T N1 ~ 50 K with a propagation wave vector of K 1 = (0.5 0 0), a transition temperature much higher than the previously reported one at ~10 K (T N2 ). Both Ru and Ho-moments order simultaneously below T N1 , followed by spin-reorientations at lower temperatures, demonstrating strong Ru(4d)-Ho(4f) magnetic correlation. Below T N1 another magnetic phase with a propagation wave vector K 2 = (0.25 0.25 0) emerges and coexists with the one associated with K 1 , which is rarely observed and suggests complex magnetism due to phase competition in the magnetic ground state. Here, we argue that the exchange-striction arising from the up-up-down-down spin structure associated with K 2 below T N2 may be responsible for the small ferroelectric polarization reported previously in this compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of Variations in Condensed Carbon Morphology Dependent on Composition B Detonation Conditions

Carbon particulates generated during detonation depend upon high explosive type, composition, and detonation conditions. Although explosive composition greatly affects particulates, the focus of this work is on how detonation geometries that induce much higher temperatures and pressures in the high explosive lead to differing particulate morphologies. In this study, two geometries were used: Detonations were initiated in Composition B cylinders at one end in conventional detonations and initiated at both ends to produce colliding detonations. Each of these detonations was observed on the sub-μs timescale using fast radiography capturing images of the front moving through the cylinder, and colliding detonation fronts in real-time. These imaging experiments were complemented with time-resolved small-angle x-ray scattering (SAXS) experiments that were able to observe and determine the varying condensed carbon morphologies at different locations and times in each detonation. The detonations could be timed in such a way that the spatial and temporal dependence of the carbon morphology could be superimposed onto radiography images collected at the same point in time. The complementary approach is able to show that the carbon condensates are much larger when formed in the elevated temperature and pressure conditions near the location of colliding detonation fronts. Thermochemical modeling suggests that these larger particulates form either in the diamond phase or on the liquidus line of the carbon phase diagram. The increase in size observed by SAXS may correlate well with the increased residence time deeply in the diamond phase. Finally, these particulates can be described as nano-sized phases with some surface texture or otherwise near-surface intra-particle heterogeneity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identifying Topological Defects in Lamellar Phases through Contour Analysis of Complex Wave Fields

Lamellar phases frequently contain structural imperfections that significantly affect their behaviors and properties. Our previous research successfully reconstructed real-space configurations of defective lamellar phases from diffuse scattering patterns, indicating the presence of phase vortices as a potential method for identifying topological defects disrupting the smectic ordering. Here, this report presents a mathematical framework using regularized wave fields to represent defective lamellar structures in real space. Phase singularities, resulting from the interference of random waves and indicating lamellar order disruption, are identified through a contour integral. These wave fields, derived from coherent scattering in reciprocal space, were validated via computational benchmarks analyzing small-angle neutron scattering data from AOT surfactant solutions, facilitating further statistical analysis of the defects. Our study highlights the potential to extract meaningful information about topological defects in lyotropic phases by inversely analyzing experimentally measured two-point static correlations. Our method allows for detailed structural analysis of various lyotropic phases, both particulate and nonparticulate, in their quiescent states and facilitates quantitative investigation of defects’ role in phase transitions. By integrating small-angle scattering, deep learning, and vortex tangle analysis, our comprehensive approach shows promise in addressing complex challenges in the structural analysis of soft matter systems.

36 MATERIALS SCIENCE↗

Comparison of time/phase lags in the hard state and plateau state of GRS 1915+105

We investigate the complex behavior of energy- and frequency-dependent time/phase lags in the plateau state and the radio-quiet hard (χ) state of GRS 1915+105. In our timing analysis, we find that when the source is faint in the radio, quasi-periodic oscillations (QPOs) are observed above 2 Hz and typically exhibit soft lags (soft photons lag hard photons), whereas QPOs in the radio-bright plateau state are found below 2.2 Hz and consistently show hard lags. The phase lag at the QPO frequency is strongly anti-correlated with that frequency, changing sign at 2.2 Hz. However, the phase lag at the frequency of the first harmonic is positive and nearly independent of that frequency at ∼0.172 rad, regardless of the radio emission. The lag energy dependence at the first harmonic is also independent of radio flux. However, the lags at the QPO frequency are negative at all energies during the radio-quiet state, but lags at the QPO frequency during the plateau state are positive at all energies and show a 'reflection-type' evolution of the lag energy spectra with respect to the radio-quiet state. The lag energy dependence is roughly logarithmic, but there is some evidence for a break around 4-6 keV. Finally, the Fourier-frequency-dependent phase lag spectra are fairly flat during the plateau state, but increase from negative to positive during the radio-quiet state. We discuss the implications of our results in light of some generic models.

79 ASTRONOMY AND ASTROPHYSICS↗

Adhesive bond evaluation using phase sensitive detection techniques

Quadrature phase detection techniques have been used to monitor the amplitude and phase of a toneburst ultrasonic wave normally reflected from adhesively-bonded steel/rubber interface. The measured phase change values of the reflected signals were found to correlate with variations in sample preparation. It was determined that measured phase shift changes were larger for samples with weaker bonds as manifested by smaller measured values of the applied tensile loads at failure. A model calculation which incorporates the concept of interfacial strength into the usual problem of wave propagation in multi-layered isotropic elastic media was used to deduce a bond-quality parameter from an experimentally measured phase shift.

Smith, Alphonso C.↗

Control of electronic topology in a strongly correlated electron system

It is becoming increasingly clear that breakthrough in quantum applications necessitates materials innovation. In high demand are conductors with robust topological states that can be manipulated at will. This is what we demonstrate in the present work. We discover that the pronounced topological response of a strongly correlated “Weyl-Kondo” semimetal can be genuinely manipulated—and ultimately fully suppressed—by magnetic fields. We understand this behavior as a Zeeman-driven motion of Weyl nodes in momentum space, up to the point where the nodes meet and annihilate in a topological quantum phase transition. The topologically trivial but correlated background remains unaffected across this transition, as is shown by our investigations up to much larger fields. Our work lays the ground for systematic explorations of electronic topology, and boosts the prospect for topological quantum devices.

36 MATERIALS SCIENCE↗

Quantum correlations in a clusterlike system

We discuss a clusterlike one-dimensional system with triplet interaction. We study the topological properties of this system. We find that the degeneracy depends on the topology of the system and is well protected against external local perturbations. All these facts show that the system is topologically ordered. We also find a string order parameter to characterize the quantum phase transition. Besides, we investigate two-site correlations including entanglement, quantum discord, and mutual information. We study the different divergence behaviors of the correlations. The quantum correlation decays exponentially in both topological and magnetic phases, and diverges in reversed power law at the critical point. And we find that in topological order systems, the global difference of topology induced by dimension can be reflected in local quantum correlations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of water on nanomechanics of bone is different between tension and compression

Water, an important constituent in bone, resides in different compartments in bone matrix and may impose significant effects on its bulk mechanical properties. However, a clear understanding of the mechanistic role of water in toughening bone is yet to emerge. To address this issue, this study used a progressive loading protocol, coupled with measurements of in situ mineral and collagen fibril deformations using synchrotron X-ray diffraction techniques. Using this unique approach, the contribution of water to the ultrastructural behavior of bone was examined by testing bone specimens in different loading modes (tension and compression) and hydration states (wet and dehydrated). The results indicated that the effect of water on the mechanical behavior of mineral and collagen phases at the ultrastructural level was loading mode dependent and correlated with the bulk behavior of bone. Tensile loading elicited a transitional drop followed by an increase in load bearing by the mineral phase at the ultrastructural level, which was correlated with a strain hardening behavior of bone at the bulk level. Compression loading caused a continuous loss of load bearing by the mineral phase, which was reflected at the bulk level as a strain softening behavior. In addition, viscous strain relaxation and pre-strain reduction were observed in the mineral phase in the presence of water. Taken together, the results of this study suggest that water dictates the bulk behavior of bone by altering the interaction between mineral crystals and their surrounding matrix.

Samuel, Jitin (ORCID:0000000195203350)↗

Introducing a New Spitzer Master BLISS Map to Remove the Instrument Systematic Phase-curve-parameter Degeneracy, as Demonstrated by a Reanalysis of the 4.5 μm WASP-43b Phase Curve

While Spitzer Infrared Array Camera (IRAC) systematics are generally well understood, each data set can provide its own challenges that continue to teach us about the underlying functional form of these systematics. Multiple groups have analyzed the phase curves of WASP-43b with varying detrending techniques, each obtaining different results. In this work, we take another look at WASP-43b while exploring the degenerate relation between Bilinearly Interpolated Subpixel Sensitivity (BLISS) mapping, point response function (PRF)–FWHM detrending, and phase curve parameters. We find that there is a strong correlation between the detrending parameters in the two models, and best-fit phase curve amplitudes vary strongly when the data are temporally binned. To remove this degeneracy, we present a new Gaussian centroided intrapixel sensitivity map (hereafter fixed sensitivity map), generated using 3,712,830 exposures spanning 5 yr, for a variety of aperture sizes at 4.5 μm. We find evidence for time variability in the sensitivity at 3.6 μm and do not generate a visit-independent map for this channel. With the fixed 4.5 μm intrapixel sensitivity map, the best fits for WASP-43b no longer vary strongly with bin size and PRF–FWHM detrending is no longer required to remove correlated noise. For data sets that do not fall completely within the sweet spot, temporal binning should not be used in the analysis of Spitzer phase curves. We confirm nightside emission for WASP-43b with a disk-integrated nightside temperature of 806 ± 48 K at 4.5 μm. The 4.5 μm maps are available at github.com/kevin218/POET.

79 ASTRONOMY AND ASTROPHYSICS↗

Organic carbon content and turnover time in relation to pedogenic iron and aluminum in four temperate forest soils sampled in 2007

Soil organic carbon (SOC) can be stabilized via association with iron (Fe) and aluminum (Al) minerals. Fe and Al can be strong predictors of SOC storage and turnover in soils with relatively high extractable metals content and moderately acidic to circumneutral pH. Here we test whether pedogenic Fe and Al influence SOC content and turnover in soils with low Fe and Al content and acidic pH. In soils from four sites spanning three soil orders, we quantified the amount of Fe and Al in operationally-defined poorly crystalline and organically-complexed phases using selective chemical dissolution applied to the soil fraction containing mineral-associated carbon. We evaluated the correlations of Fe and Al concentrations, mean annual precipitation (MAP), mean annual temperature (MAT), and pH with SOC content and 14C-based turnover times. We found that poorly crystalline Fe and Al content predicted SOC turnover times (p < 0.0001) consistent with findings of previous studies, while organically-complexed Fe and Al content was a better predictor of SOC concentration (p < 0.0001). Greater site-level MAP (p < 0.0001) and colder site-level MAT (p < 0.0001) were correlated with longer SOC turnover times but were not correlated with SOC content. Our results suggest that poorly crystalline Fe and Al effectively slow the turnover of SOC in these acidic soils, even when their combined content in the soil is less than 2% by mass. However, in the strongly acidic Spodosol, organo-metal complexes tended to be less stable resulting in a more actively cycling mineral-associated SOC pool. We characterized mineralogy and carbon content in soils from four forested sites in the eastern deciduous forest zone that span three soil orders. Using selective chemical dissolution applied to the soil fraction containing mineral-associated carbon, we quantified the amount of Fe and Al in operationally-defined poorly crystalline and organically-complexed phases, and correlated these with previously published SOC content and 14C-based turnover times (McFarlane et al. 2013). This dataset comprises site characterization undertaken in 2007 (.png) and subsequent soil analyses (.csv containing C, Fe, Al, 14C-derived TurnoverTime) concluded in 2010.

54 ENVIRONMENTAL SCIENCES↗

π phase shift across stripes in a charge density wave system

Many strongly correlated materials are characterized by deeply intertwined charge and spin order. Besides their high superconducting transition temperatures, one of the central features of these complex patterns in cuprates is a phase shift which occurs across lines of decreased hole density. That is, when doped away from their antiferromagnetic phase, the additional charge is not distributed uniformly, but rather in “stripes.” The sublattices preferentially occupied by up and down spin are reversed across these stripes, a phenomenon referred to as a “π phase shift.” Many of the spin-charge patterns, including the π phase shift, are reproduced by density matrix renormalization group and quantum Monte Carlo calculations of simplified tight binding (repulsive Hubbard) models. In this paper we demonstrate that this sublattice reversal is generic by considering the corresponding phenomenon in the attractive Hubbard Hamiltonian, where a charge density wave phase forms at half filling. Here, we introduce charge stripes via an appropriate local chemical potential; measurements of charge correlation across the resulting lines of lowered density reveal a clear π phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fragile 3D Order in V 1 - x Mo x O 2

The metal-to-insulator transition in rutile VO2 has proven uniquely difficult to characterize because of the complex interplay between electron correlations and atomic structure. Here, we report the discovery of the sudden collapse of three-dimensional order in the low-temperature phase of V1-xMoxO2 at x = 0.17 and the emergence of a novel frustrated two-dimensional order at x = 0.19, with only a slight change in electronic properties. Single crystal diffuse x-ray scattering reveals that this transition from the 3D M1 phase to a 2D variant of the M2 phase results in long-range structural correlations along symmetry-equivalent (11L) planes of the tetragonal rutile structure, yet extremely short-range correlations transverse to these planes. These findings suggest that this two dimensionality results from a novel form of geometric frustration that is essentially structural in origin.

36 MATERIALS SCIENCE↗

Possible interaction driven topological phases in (111) bilayers of LaNiO3

We use the variational mean-field approach to systematically study the phase diagram of a bilayer heterostructure of the correlated transition metal oxide LaNiO3, grown along the (111) direction. The Ni3+ ions with d7 (or e1g) configuration form a buckled honeycomb lattice. We show that as a function of the strength of the on-site interactions, various topological phases emerge. In the presence of a reasonable size of the Hund s coupling, as the correlation is tuned from intermediate to strong, the following sequence of phases is found: (1) a Dirac half-semimetal phase, (2) a quantum anomalous Hall insulator (QAHI) phase with Chern number one, and (3) a ferromagnetic nematic phase breaking the lattice point group symmetry. The spin-orbit couplings and magnetism are both dynamically generated in the QAHI phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exploring the impact of multivalent substitution on high-temperature electrical conductivity in doped lanthanum chromite perovskites: An experimental and ab-initio study

Doped LaCrO 3 perovskites hold promise as robust materials for electrical interconnects and sensor applications in harsh environments. In this work, we investigated the high-temperature behavior of La 1–x Sr x CrO 3 , La 1–x Ca x CrO 3 and La 0.8 Sr 0.2 Cr 1-x Mn x O3 (0.1 ≤ x ≤ 0.4) through a combination of computational modeling and physical characterization up to 1500 °C. Crystalline structural properties were determined and compared with ab-initio calculations, which demonstrated excellent agreement with experimental findings. High-temperature electrical conductivity measurements were performed under different atmospheres. Calcium and strontium/manganese co-doped lanthanum chromites exhibited typical semiconductor exponential trends and conductivity showed proportional correlation with substitutions levels up to 30 %. The DFT modelling was completed up to 1500 °C, including low and high temperature chromite phases and oxygen vacancies insertion. Calculations were correlated with experimental electrical properties. This work expands the understanding of doped lanthanum chromites and paves the way for the development of materials suitable for demanding high-temperature applications.

20 FOSSIL-FUELED POWER PLANTS↗

Predictions of entry heating for lower surface of shuttle orbiter

A broad base of thermocouple and phase change paint data was assembled and correlated to the nominal design 14414.1 and proposed STS-1 (first flight of the space transportation system) entry trajectories. Averaged data from phase change paint tests compared favorably with thermocouple data for predicting heating rates. Laminar and turbulent radiation equilibrium heating rates were computed on the lower surface of the Shuttle orbiter for both trajectories, and the lower surface center line results were compared both with aerodynamic heating design data and with flight values from the STS-1 and STS-2 trajectories. The peak laminar heating values from the aerodynamic heating design data book were generally 40 to 60 percent higher than the laminar estimates of this study, except at the 55 percent location of maximum span where the design data book values were less than 10 percent higher. Estimates of both laminar and turbulent heating rates compared favorably with flight data.

Edwards, C. L. W.↗

Large-d phase transitions in holographic mutual information

In the AdS/CFT correspondence, the entanglement entropy of subregions in the boundary CFT is conjectured to be dual to the area of a bulk extremal surface at leading order in G N in the holographic limit. Under this dictionary, distantly separated regions in the CFT vacuum state have zero mutual information at leading order, and only attain nonzero mutual information at this order when they lie close enough to develop significant classical and quantum correlations. Previously, the separation at which this phase transition occurs for equal-size ball-shaped regions centered at antipodal points on the boundary was known analytically only in 3 spacetime dimensions. Inspired by recent explorations of general relativity at large- d , we compute the separation at which the phase transition occurs analytically in the limit of infinitely many spacetime dimensions, and find that distant regions cannot develop large correlations without collectively occupying the entire volume of the boundary theory. We interpret this result as illustrating the spatial decoupling of holographic correlations in the large- d limit, and provide intuition for this phenomenon using results from quantum information theory. We also compute the phase transition separation numerically for a range of bulk spacetime dimensions from 4 to 21, where analytic results are intractable but numerical results provide insight into the dimension-dependence of holographic correlations. For bulk dimensions above 5, our exact numerical results are well approximated analytically by working to next-to-leading order in the large- d expansion.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Analysis of the Amplitude Response of a Two-Point and a Two-Line/Multi-Point Focused Laser Differential Interferometer

Experiments were performed with two different focused laser differential interferometer (FLDI) instruments to assess the amplitude response of each instrument to a traveling shock-wave generated by a laser spark. The first FLDI instrument generated two measurement points, with each measurement point providing sensitivity to density fluctuations induced by the shockwave. By performing a cross-correlation between the signals obtained from each measurement point, the phase velocity of density fluctuations can be obtained. The second FLDI instrument generated two measurement lines that are oriented either parallel or orthogonal to the shockwave direction of travel with the resulting interference pattern sampled at multiple equally-spaced points along each line. As a result, this instrument provides density fluctuation measurement capability at multiple points simultaneously. When the measurement lines are oriented parallel to the shockwave direction of travel, the phase velocity, rate of change of the phase velocity, and acceleration of density fluctuations traveling along each line can be obtained by performing a cross-correlation between points along a single line. When the measurement lines are oriented orthogonal to the shockwave direction of travel, the spatially-varying phase velocity can be obtained by performing a cross-correlation between points at the same relative location on each measurement line. Computations of the shockwave generated by the laser spark are used to simulate the response of each instrument and are compared to the experimental results. High-speed Schlieren imaging has also been performed and is compared with the FLDI measurements and computational results.

Focused Laser Differential Interferometer↗