Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Interfacial Phenomena and Mechanical Behavior of Polyetheretherketone/Polybenzimidazole Blend under Hygrothermal Environment

Demands for engineering applications of high performance polymers, such as the polyaryletherketone families, have grown significantly in recent years. Fundamental knowledge on the mechanical behavior of such polymers, especially under harsh environments, is still lacking. In this study, the mechanical behavior and interfacial phenomena of a blend of polybenzimidazole (PBI) particles having sizes of about 50 μm and polyetheretherketone (PEEK) matrix at 50:50 weight ratio was characterized. PBI and PEEK are known to be incompatible with each other in the dry state. The possible influence of hygrothermal exposure on interfacial bonding between PEEK and PBI has been systematically studied. Under dry conditions, the PEEK matrix dominates the dynamic mechanical behavior, indicating no noticeable viscoelastic coupling between the two phases. After being exposed to hygrothermal conditions, the T g of the PEEK phase in the blend shifts to a lower temperature by as much as 26 °C. The extent of this shift is much greater than what is observed for neat PEEK alone under the same condition. Nanomechanical property mapping results indicate that the interfacial region is broadened after 288 °C hot water immersion treatment. The above finding strongly suggests the hygrothermal conditioning promotes apparent compatibility between PEEK and PBI. Likewise, the fracture behavior of the blend provides direct evidence that the interfacial adhesion is greater than the cohesive strength of either phase after water immersion. In the meantime, it is found that both fracture toughness and tensile strength of the blend are improved by water absorption at 60 °C, at the expense of a minor reduction in Young’s modulus. However, if the blend is exposed to hot water at 288 °C, all of the mechanical properties will deteriorate significantly. In conclusion, the possible causes of the mechanical property deterioration in the PEEK/PBI blend after hygrothermal treatment are discussed.

36 MATERIALS SCIENCE↗

Recent advances and issues in development of silicon carbide composites for fusion applications

Radiation-resistant advanced silicon carbide (SiC/SiC) composites have been developed as a promising candidate of the high-temperature operating advanced fusion reactor. With the completion of the 'proof-of-principle' phase in development of 'nuclear-grade' SiC/SiC composites, the R&D on SiC/SiC composites is shifting toward the more pragmatic phase, i.e., industrialization of component manufactures and data-basing. In this paper, recent advances and issues in (1) development of component fabrication technology including joining and functional coating, e.g., a tungsten overcoat as a plasma facing barrier, (2) recent updates in characterization of non-irradiated properties, e.g., strength anisotropy and chemical compatibility with solid lithium-based ceramics and lead-lithium liquid metal breeders, and (3) irradiation effects are specifically reviewed. Importantly high-temperature neutron irradiation effects on microstructural evolution, thermal and electrical conductivities and mechanical properties including the fiber/matrix interfacial strength are specified under various irradiation conditions, indicating seemingly very minor influence on the composite performance in the design temperature range.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A tight relation between N/O ratio and galaxy stellar mass can explain the evolution of strong emission line ratios with redshift

The offset of high-redshift star-forming galaxies in the [O iii]/Hβ versus [N ii]/Hα (O3N2) diagram in comparison with the local star-forming galaxy sequence is now well established. The physical origin of the shift is the subject of some debate and has important implications for metallicity measurements based on strong lines at all redshifts. To investigate the origin of the O3N2 offset, we use a sample of ∼100,000 star-forming galaxies from the Sloan Digital Sky Survey DR12 to understand how measurable galaxy physical properties (Σ{sub SFR}, ionization parameter, nitrogen-to-oxygen (N/O) ratio, and stellar mass) drive galaxy position in two key diagnostic diagrams: O3N2 and [O iii]/Hβ versus [S ii]/Hα (O3S2). At fixed [O iii]/Hβ, galaxies close to the high-redshift locus in O3N2 have higher Σ{sub SFR}, stellar mass, and N/O ratio. We conclude that higher N/O ratios at fixed [O iii]/Hβ are the proximate cause of the O3N2 shift. We also find a tight correspondence in the distributions of stellar mass and N/O in the diagnostic diagrams. This relation, spanning a range of galaxy evolutionary states, suggests that the N/O–M {sub *} relation is more fundamental than the relation between N/O and O/H. We argue that a more fundamental N/O–M {sub *} relation is well-motivated physically. Because the mass–metallicity relation evolves more rapidly with redshift than N/O–M {sub *}, the N/O ratios of high-redshift galaxies are elevated in comparison with local galaxies with the same gas-phase O/H. The O3N2 shift and elevated N/O ratios observed in high-redshift galaxies, therefore, come about as a natural consequence of the N/O–M {sub *} relation combined with the evolution of the mass–metallicity relation.

79 ASTRONOMY AND ASTROPHYSICS↗

Rich structural phase diagram and thermoelectric properties of layered tellurides Mo{sub 1−x}Nb{sub x}Te{sub 2}

MoTe{sub 2} is a rare transition-metal ditelluride having two kinds of layered polytypes, hexagonal structure with trigonal prismatic Mo coordination and monoclinic structure with octahedral Mo coordination. The monoclinic distortion in the latter is caused by anisotropic metal-metal bonding. In this work, we have examined the Nb doping effect on both polytypes of MoTe{sub 2} and clarified a structural phase diagram for Mo{sub 1−x}Nb{sub x}Te{sub 2} containing four kinds of polytypes. A rhombohedral polytype crystallizing in polar space group has been newly identified as a high-temperature metastable phase at slightly Nb-rich composition. Considering the results of thermoelectric measurements and the first-principles calculations, the Nb ion seemingly acts as a hole dopant in the rigid band scheme. On the other hand, the significant interlayer contraction upon the Nb doping, associated with the Te p-p hybridization, is confirmed especially for the monoclinic phase, which implies a shift of the p-band energy level. The origin of the metal-metal bonding in the monoclinic structure is discussed in terms of the d electron counting and the Te p-p hybridization.

36 MATERIALS SCIENCE↗

A novel high-temperature MAS probe with optimized temperature gradient across sample rotor for in-situ monitoring of high-temperature high-pressure chemical reactions

We present a novel nuclear magnetic resonance (NMR) probe design focused on optimizing the temperature gradient across the sample for high temperature magic angle spinning (MAS) experiments using standard rotors. Computational flow dynamics (CFD) simulations were used to assess and optimize the temperature gradient across the sample under MAS conditions. The chemical shift and linewidth of 207 Pb direct polarization in lead nitrate were used to calibrate the sample temperature and temperature gradient, respectively. A temperature gradient of less than 3 °C across the sample was obtained by heating bearing gas flows and adjusting its temperature and flow rate during variable temperature (VT) experiments. A maximum temperature of 350 °C was achieved in this probe using a Varian 5 mm MAS rotor with standard Vespel drive tips and end caps. Time-resolved 13 C and 1 H MAS NMR experiments were performed at 325 °C and 60 bar to monitor an in-situ mixed phase reverse water gas shift reaction, industrial synthesis of CH 3 OH from a mixture of CO 2 and H 2 with a Cu/ZnO/Al 2 O 3 catalyst, demonstrating the first in-situ NMR monitoring of a chemical system at temperatures higher than 250 °C in a pressurized environment. Lastly, the combination of this high-temperature probe and high-pressure rotors will allow for in-situ NMR studies of a great variety of chemical reactions that are inaccessible to conventional NMR setup.

47 OTHER INSTRUMENTATION↗

Magnetic and low temperature phonon studies of CoCr{sub 2}O{sub 4} powders doped with Fe(III) and Ni(II) ions

Extensive temperature-dependent phonon studies and low-temperature magnetic measurements of CoCr{sub 2−x}Fe{sub x}O{sub 4} (for x=0.5, 1 and 2) and Co{sub 0.9}Ni{sub 0.1}Cr{sub 2}O{sub 4} polycrystalline powders are presented. The main aim of these studies was to obtain information on phonon and structural properties of these compounds as well as strength of spin–phonon coupling in the magnetically ordered phases. IR and Raman spectra show that doping of CoCr{sub 2}O{sub 4} with Fe(III) ions leads to broadening of bands and appearance of new bands due to the formation of inverted spinel structure. In contrast to this behavior, doping with 10 mol% of Ni(II) ions leads to weak increase of band width only. Magnetization measured as a function of temperature and external magnetic field showed that magnetic properties of Co{sub 0.9}Ni{sub 0.1}Cr{sub 2}O{sub 4} sample are similar to those reported for pure CoCr{sub 2}O{sub 4}, i.e., partial substitution of Ni(II) for Co(II) leads to slight shift of the ferrimagnetic phase transition at T{sub C} and spiral spin order transition at T{sub S} towards lower values. The change of crystallization preference induced by incorporation of increasing concentration of Fe(III) ions in the spinel lattice causes significant increase of T{sub C} and decrease of T{sub S}. The latter transition disappears completely for higher concentrations of Fe(III). The performed temperature-dependent IR studies revealed interesting anomalous behavior of phonons below T{sub C} for CoCr{sub 1.5}Fe{sub 0.5}O{sub 4} and Co{sub 0.9}Ni{sub 0.1}Cr{sub 2}O{sub 4}, which was attributed to spin–phonon coupling. - Graphical abstract: Visualization of normal spinel-type AB{sub 2}O{sub 4} structure, where blue octahedrons denote BO{sub 6} and red tetrahedrons AO{sub 4} units as well as IR and Raman spectra of Co{sub 0.9}Ni{sub 0.1}Cr{sub 2}O{sub 4} powder. - Highlights: • T{sub C} (T{sub S}) increases (decreases) with increasing Fe(III) concentration. • Ni(II) ions doping up to 10 mol% does not change remarkably T{sub C} and T{sub S}. • Doping with Fe(III) ions causes increase of spinel inversion parameter. • Spin–phonon interactions in Co{sub 0.9}Ni{sub 0.1}Cr{sub 2}O{sub 4} and CoCr{sub 1.5}Fe{sub 0.5}O{sub 4} were evidenced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Empirical validation and comparison of methodologies to simulate micro and macro-encapsulated PCMs in the building envelope

Thermal Energy Storage (TES) has the potential to shift peak electricity demand. Passive TES is usually implemented in building envelope as micro and macro encapsulated phase change materials (PCM) to shift electric energy demand and therefore requires careful heat transfer analysis. Whole building energy modelling with simplified heat transfer analysis has become extremely important for designers, architects, engineers, and researchers to predict energy performance of buildings. It is important to validate PCM modelling algorithms used in building energy programs to quantify their error and prove their capacity to model different PCM encapsulation types. This study uses data from a microencapsulated PCM and two macroencapsulated PCMs (Bio based PCM and hydrate salts) tested in full-scale using the Advanced Multiscale Building Energy Research (AMBER) Lab located at the Colorado School of Mines and is used to validate a numerical algorithm written in MATLAB language. To approximate the heat transfer through a wall assembly with macroencapsulated PCM pouches, several modelling techniques that can reduce 3D heat transfer characteristics to 1D are explored in this research. A parallel path heat transfer modelling approach is found to give the closest agreement with the experimental data for the pouched PCMs in building envelope applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Investigating the zonal wind response to SST warming using transient ensemble AGCM experiments

The response of the atmospheric circulation to greenhouse gas-induced SST warming is investigated using large ensemble experiments with two AGCMs, with a focus on the robust feature of the poleward shift of the eddy driven jet. In these experiments, large ensembles of simulations are conducted by abruptly switching the SST forcing on from January 1st to focus on the wintertime circulation adjustment. A hybrid, nite amplitude wave activity budget analysis is performed to elucidate the nonlinear and irreversible aspects of the eddy-mean ow interaction during the adjustment of the zonal wind towards a poleward shifted state. The results conrm the results from earlier more idealized studies, particularly the importance of reduced dissipation of wave activity and the dominant role of the decrease of elective diffusivity in the midlatitudes. Some quantitative discrences do exist between the wave activity budgets of our more realistic experiments and the earlier idealized ones, including larger wave activity tendency and diabatic wave source, and a somewhat greater role of the changing PV gradient in the total reduction of the wave activity dissipation. The relative importance of wave breaking-induced PV mixing versus diabatic PV source in the evolution of the Lagrangian PV gradient is also investigated. The former plays the dominant role in the PV gradient formation during the initial phase of the jet shift, while the latter even opposes the evolution of the Lagrangian PV gradient at times. The possible involvement of the wave reflection level at the poleward flank of the mean jet is also investigated.

54 ENVIRONMENTAL SCIENCES↗

Influence of crystalline phase and defects in the ZrO{sub 2} nanoparticles synthesized by thermal plasma route on its photocatalytic properties

Graphical abstract: Thermal plasma synthesized nanophase zirconia showing the blue shift in the band gap of monoclinic phase as found from the photoabsorption spectroscopy was found to be the dominant parameter for the enhancement in its photocatalytic activity. The existence of different defect states and their concentration in as synthesized samples also inferred from the photoabsorption measurements were also found to be responsible for the enhanced photocatalytic activity of the samples. Highlights: ► Phase controlled structural formation of nanophase ZrO{sub 2} by thermal plasma route. ► Enhanced photocatalytic degradation rate of methylene blue dye. ► The blue shift in the band gap of monoclinic phase of nanocrystalline ZrO{sub 2}. ► Existence of different defect states in the as synthesized nano phase ZrO{sub 2}. ► Several competing processes which controls the photocatalytic degradation rate. -- Abstract: The photocatalytic activity of pure ZrO{sub 2} samples, prepared by a thermal plasma route, and characterized by X-ray diffraction technique was tested for the degradation of methylene blue, which is known to be a hazardous dye. Although, all these samples synthesized at different operating pressures of the thermal plasma reactor showed the photocatalytic activity; the sample synthesized at 1.33 bar of operating pressure showed the highest photocatalytic activity. The blue shift in the band gap of monoclinic phase, as observed from the photo-absorption spectroscopy, may be attributed to the enhanced photocatalytic activity. The existence of different defect states and their concentration as, inferred from the photo-absorption measurements were also found to be responsible for the enhanced photocatalytic activity of the as synthesized samples.

36 MATERIALS SCIENCE↗

Combining Monte Carlo simulation and density-functional theory to describe the spectral changes of Na{sub 2} in liquid helium

Spectral changes of Na{sub 2} in liquid helium were studied using the sequential Monte Carlo-quantum mechanics method. Configurations composed by Na{sub 2} surrounded by explicit helium atoms sampled from the Monte Carlo simulation were submitted to time-dependent density-functional theory calculations of the electronic absorption spectrum using different functionals. Attention is given to both line shift and line broadening. The Perdew, Burke, and Ernzerhof (PBE1PBE, also known as PBE0) functional, with the PBE1PBE/6-311++G(2d,2p) basis set, gives the spectral shift, compared to gas phase, of 500 cm{sup -1} for the allowed X {sup 1}{Sigma}{sub g}{sup +}{yields}B {sup 1}{Pi}{sub u} transition, in very good agreement with the experimental value (700 cm{sup -1}). For comparison, cluster calculations were also performed and the first X {sup 1}{Sigma}{sub g}{sup +}{yields}A {sup 1}{Sigma}{sub u}{sup +} transition was also considered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic field dependence of the martensitic transition and magnetocaloric effects in Ni 49 BiMn 35 In 15

The structural, magnetic, and magnetocaloric properties of the Bi-doped Heusler alloy Ni 49 BiMn 35 In 15 have been investigated using room temperature X-ray diffraction (XRD) and magnetization measurements in a temperature interval of 5-400 K. The alloy at room temperature was found to be in a mixture of a high temperature austenite phase (AP) and a low temperature martensite phase (MP). A drastic shift in the martensitic transition temperature at the rate of 16 K/T from 197 K to lower temperatures was observed. A kinetic arrest phenomenon of the AP was observed in the magnetization and electrical resistivity measurements during field-cooled (FC) measurements at 5T. A metamagnetic behavior characterized by a jump in magnetization in the isothermal M ( H ) curves near T M was observed. The maximum value of the magnetic entropy change and refrigerant capacity at Curie temperature were found to be 5.5 Jkg -1 K -1 and 312 Jkg -1 for μ o Δ H = 5T, respectively. A large magnetoresistance value of -56% was found near the martensitic transition.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Axion misalignment driven to the hilltop

The QCD axion serves as a well-motivated dark matter candidate and the misalignment mechanism is known to reproduce the observed abundance with a decay constant $f_a \simeq \mathcal{O}(10^{12})$ GeV for a misalignment angle $\theta_{\rm mis} \simeq \mathcal{O}(1)$. While $f_a \ll 10^{12}$ GeV is of great experimental interest, the misalignment mechanism requires the axion to be very close to the hilltop, i.e. $\theta_{\rm mis} \simeq \pi$. This particular choice of $\theta_{\rm mis}$ has been understood as fine-tuning the initial condition. We offer a dynamical explanation for $\theta_{\rm mis} \simeq \pi$ in a class of models. The axion dynamically relaxes to the minimum of the potential by virtue of an enhanced mass in the early universe. This minimum is subsequently converted to a hilltop because the CP phase of the theory shifts by $\pi$ when one contribution becomes subdominant to another with an opposite sign. We demonstrate explicit and viable examples in supersymmetric models where the higher dimensional Higgs coupling with the inflaton naturally achieves both criteria. Associated phenomenology includes a strikingly sharp prediction of $3 \times 10^9$ GeV $\lesssim f_a \lesssim 10^{10}$ GeV and the absence of isocurvature perturbation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Synthesis and morphological characterization of linear and miktoarm star poly(solketal methacrylate)- block -polystyrene copolymers

The synthesis, molecular characterization, and morphological evaluation of AB n, (n = 2,3) miktoarm star block copolymers consisting of poly(glycerol monomethacrylate) (PGMA) and polystyrene (PS) with varying molecular weights and compositions is described. The system is known to demonstrate a remarkably high Flory-Huggins interaction parameter. The corresponding linear diblock copolymer analogues, were synthesized as well, and comparisons with regard to feature dimensions and morphologies are provided. Well-ordered nanostructures of various morphologies were formed with domain spacing as low as 7.2 nm. Different morphologies were attained by some of the topological isomers indicating that in miktoarm star block copolymers the phase boundaries were strongly shifted. Additionally, a triblock ABA analogue was studied to investigate the effect of triblock copolymer conformations. Noteworthy is that for copolymers with different macromolecular architecture leading to similar morphology; different domain spacings were obtained. The synthesis of all the samples was carried out by high-vacuum anionic polymerization techniques. Molecular characterization with Size Exclusion Chromatography (SEC) and Proton Nuclear Magnetic Resonance Spectroscopy ( 1 H NMR) confirmed well-defined copolymers obtained. The morphological characterization was accomplished by Small-Angle X-ray Scattering (SAXS). In conclusion, the observations from this study highlight the potential of incorporating macromolecular architecture in the self-assembly of strongly immiscible block copolymers to attain ultra-small nanofeatures with desired morphologies.

36 MATERIALS SCIENCE↗

Surface and mechanical properties of transparent polycrystalline YAG fabricated by SPS

Graphical abstract: - Highlights: • Ultrasonication as effective, un-polluting dispersion route for YAG powders. • Annealing in the 700–900 °C range to increase the transparency. • Oxygen vacancies more crucial on the transmittance than C contamination. • SPS reliable method for transparent and ultra-fine polycrystalline YAG. • Very high hardness (16.5–17 GPa) for the fully dense, fine materials. - Abstract: YAG powder was synthesised by reverse-strike co-precipitation, calcined at 1000 °C and dispersed by either ball-milling with α-alumina (BM{sub A}) or zirconia (BMz) spheres or by ultrasonication (US). All the dispersed powders were consolidated by SPS to nearly theoretical density, but only the US powder gave rise to a transparent material (transmittance of about 60% at 600 nm, 1 mm thickness), characterised by an ultra-fine microstructure (average size of 330 nm). In the BM materials, Raman spectroscopy allowed to evidence some phonon vibrational shifts due to secondary phases deriving from pollution by the milling media, not detectable by XRD because present in small amounts. The transmittance of the as-sintered US sample was further increased by annealing in air at 900 °C; this was assigned to the restoration of some oxygen vacancies created in the reducing environment of the SPS chamber, as evidenced by XPS (X-ray photoelectron spectroscopy). Finally, US samples sintered in the 1250–1400 °C were submitted to a basic mechanical characterisation, showing a very good hardness, in spite of a moderate fracture toughness, especially for the fully dense and fine-grained materials sintered at 1300–1350 °C.

36 MATERIALS SCIENCE↗

In-situ synchrotron X-ray study of microstructural evolution during creep deformation in Grade 91 steel

Here, creep deformation mechanism of Grade 91 steel at 650 °C was investigated in-situ via wide-angle X-ray scattering (WAXS). WAXS peak broadening and a modified Williamson-Hall analysis provided information on evolution of dislocation densities in the primary α–Fe phase, while WAXS peak shifts provided lattice strains in the α–Fe matrix, M 23 C 6 and MX precipitates. Load transfer was not evident during in-situ creep deformation, suggesting that precipitates did not significantly strengthen the matrix during creep deformation. Peak broadening results illustrated an increase in average dislocation density during primary stage creep. After onset of secondary creep, there was a decrease in dislocation density, attributed to annihilation and re-ordering of dislocations in the subgrain structure, followed by a relatively constant average dislocation density with increasing strain.

36 MATERIALS SCIENCE↗

Harnessing biomimetic cryptic bonds to form self-reinforcing gels

Cryptic sites, which lay hidden in folded biomolecules, become exposed by applied force and form new bonds that reinforce the biomaterial. While these binding interactions effectively inhibit mechanical deformation, there are few synthetic materials that harness mechano-responsive cryptic sites to forestall damage. Here, we develop a computational model to design polymer gels encompassing cryptic sites and a lower critical solution temperature (LCST). LCST gels swell with a decrease in temperature, thereby generating internal stresses within the sample. The gels also encompass loops held together by the cryptic sites, as well as dangling chains with chemically reactive ends. A decrease in temperature or an applied force causes the loops to unfold and expose the cryptic sites, which then bind to the dangling chains. We show that these binding interactions act as “struts” that reinforce the network, as indicated by a significant decrease in the volume of the gel (from 44% to 80%) and shifts in the volume phase transition temperature. Once the temperature is increased or the deformation is removed, the latter “cryptic bonds” are broken, allowing the loops to refold and the gel to return to its original state. These findings provide guidelines for designing polymer networks with reversible, mechano-responsive bonds, which allow gels to undergo a self-stiffening behavior in response to a temperature-induced internal stress or external force. When applied as a coating, these gels can prevent the underlying materials from undergoing damage and thus, extend the lifetime of the system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

EFFECTS of DUAL DOPING OF C AND TiC NANOPARTICLES ON SUPERCONDUCTING PROPERTIES OF Fe-SHEATHED MgB{sub 2} TAPES

Fe-sheathed MgB{sub 2} wires doped with C and TiC nanoparticles in the formula MgB{sub 2-x}C{sub x}+yTiC(x = 0, 0.05, 0.1, 0.15, 0.2, and y = 0, 2.5 wt.%, 5 wt.%) were investigated. X-ray diffraction patterns indicate that the core materials in the wires contain small amount of Fe{sub 2}B and MgO impurity phases, and the peaks shift with the variation of doping amount. It is found that the critical temperature T{sub c} decreases with the increase of doping amount. Strong in-field current carrying capability enhancement was observed on MgB{sub 1.95}C{sub 0.05}+2.5 wt.% TiC.

36 MATERIALS SCIENCE↗

Two-dimensional Vlasov simulation of electron plasma wave trapping, wavefront bowing, self-focusing, and sideloss

Two-dimensional Vlasov simulations of nonlinear electron plasma waves are presented, in which the interplay of linear and nonlinear kinetic effects is evident. The plasma wave is created with an external traveling wave potential with a transverse envelope of width {Delta}y such that thermal electrons transit the wave in a ''sideloss'' time, t{sub sl{approx}{Delta}}y/v{sub e}. Here, v{sub e} is the electron thermal velocity. The quasisteady distribution of trapped electrons and its self-consistent plasma wave are studied after the external field is turned off. In cases of particular interest, the bounce frequency, {omega}{sub be}=k{radical}(e{phi}/m{sub e}), satisfies the trapping condition {omega}{sub be}t{sub sl}>2{pi} such that the wave frequency is nonlinearly downshifted by an amount proportional to the number of trapped electrons. Here, k is the wavenumber of the plasma wave and {phi} is its electric potential. For sufficiently short times, the magnitude of the negative frequency shift is a local function of {phi}. Because the trapping frequency shift is negative, the phase of the wave on axis lags the off-axis phase if the trapping nonlinearity dominates linear wave diffraction. In this case, the phasefronts are curved in a focusing sense. In the opposite limit, the phasefronts are curved in a defocusing sense. Analysis and simulations in which the wave amplitude and transverse width are varied establish criteria for the development of each type of wavefront. The damping and trapped-electron-induced focusing of the finite-amplitude electron plasma wave are also simulated. The damping rate of the field energy of the wave is found to be about the sideloss rate, {nu}{sub e{approx}}t{sub sl}{sup -1}. For large wave amplitudes or widths {Delta}y, a trapping-induced self-focusing of the wave is demonstrated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗