Search NASA⌕ Search

SEARCH · Search NASA

Results for “Plot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Synthetic aperture radar imaging of ocean waves - Comparison with wave measurements

Synthetic aperture radar images of ocean waves were obtained in conjunction with reference wave data near Marineland, Florida, December 14, 1975. Each of the various types of measurements were processed into a form that allowed direct comparisons with the others. Maxima of radar spectra occurred at the same frequencies as the maxima of reference wave height spectra. In a comparison of a radar spectrum with observed spectra of wave height, wave orbital velocity, and surface slope the high-frequency portion of the radar spectrum lay near and between the wave height and the orbital velocity spectra but differed significantly from the surface slope spectrum. The radar-derived mean directions and model-fitted directional spreads of wave energy were close to the values from a directional wave buoy and indicated the accuracy of radar measurements of wave direction. However, a directional plot of a radar spectrum near shore at the frequency of the maximum showed a sharper peak than such a plot of a fitted spectrum derived from reference data.

Mcleish, W.↗
NASA NTRS1980

Microwave radiometer measurements of soil moisture content

A unique set of radiometer measurements is presented, recorded during a 1000-h day and night monitoring of irrigated fields from fully saturated to completely dry. Radiometer measurements were recorded at 2.8-cm (X-band) and 21.4-cm (L-band) wavelengths for a range of incident angles from nadir to 50 deg. Soil moisture and soil temperature profile measurements were recorded to a depth of 15 cm. The test site was located in east-central Texas on a clay soil (Miller clay). Three bare-surface plots were used, each having a distinctly different surface roughness. Vegetated plots were also measured. The data quantify the sensitivity of microwave radiometer measurements to soil moisture variations, the effect of surface roughness on the measurement, and the influence of surface vegetation.

Newton, R. W.↗
NASA NTRS1981

Elastohydrodynamic lubrication of elliptical contacts

The determination of the minimum film thickness within contact is considered for both fully flooded and starved conditions. A fully flooded conjunction is one in which the film thickness is not significantly changed when the amount of lubricant is increased. The fully flooded results presented show the influence of contact geometry on minimum film thickness as expressed by the ellipticity parameter and the dimensionless speed, load, and materials parameters. These results are applied to materials of high elastic modulus (hard EHL), such as metal, and to materials of low elastic modulus(soft EHL), such as rubber. In addition to the film thickness equations that are developed, contour plots of pressure and film thickness are given which show the essential features of elastohydrodynamically lubricated conjunctions. The crescent shaped region of minimum film thickness, with its side lobes in which the separation between the solids is a minimum, clearly emerges in the numerical solutions. In addition to the 3 presented for the fully flooded results, 15 more cases are used for hard EHL contacts and 18 cases are used for soft EHL contacts in a theoretical study of the influence of lubricant starvation on film thickness and pressure. From the starved results for both hard and soft EHL contacts, a simple and important dimensionless inlet boundary distance is specified. This inlet boundary distance defines whether a fully flooded or a starved condition exists in the contact. Contour plots of pressure and film thickness in and around the contact are shown for conditions.

Hamrock, B. J.↗
NASA NTRS1981

FRANOPP: Framework for analysis and optimization problems user's guide

Framework for analysis and optimization problems (FRANOPP) is a software aid for the study and solution of design (optimization) problems which provides the driving program and plotting capability for a user generated programming system. In addition to FRANOPP, the programming system also contains the optimization code CONMIN, and two user supplied codes, one for analysis and one for output. With FRANOPP the user is provided with five options for studying a design problem. Three of the options utilize the plot capability and present an indepth study of the design problem. The study can be focused on a history of the optimization process or on the interaction of variables within the design problem.

Riley, K. M.↗
NASA NTRS1981

Model aerodynamic test results for two variable cycle engine coannular exhaust systems at simulated takeoff and cruise conditions. Comprehensive data report. Volume 3: Graphical data book 1

A graphical presentation of the aerodynamic data acquired during coannular nozzle performance wind tunnel tests is given. The graphical data consist of plots of nozzle gross thrust coefficient, fan nozzle discharge coefficient, and primary nozzle discharge coefficient. Normalized model component static pressure distributions are presented as a function of primary total pressure, fan total pressure, and ambient static pressure for selected operating conditions. In addition, the supersonic cruise configuration data include plots of nozzle efficiency and secondary-to-fan total pressure pumping characteristics. Supersonic and subsonic cruise data are given.

Nelson, D. P.↗
NASA NTRS1981

MEGA16 - Computer program for analysis and extrapolation of stress-rupture data

The computerized form of the minimum commitment method of interpolating and extrapolating stress versus time to failure data, MEGA16, is described. Examples are given of its many plots and tabular outputs for a typical set of data. The program assumes a specific model equation and then provides a family of predicted isothermals for any set of data with at least 12 stress-rupture results from three different temperatures spread over reasonable stress and time ranges. It is written in FORTRAN 4 using IBM plotting subroutines and its runs on an IBM 370 time sharing system.

Ensign, C. R.↗
NASA NTRS1980

Improved definition of crustal anomalies for Magsat data

Ongoing efforts to define and model external magnetic field activities are summarized. Data were obtained and plotted for the five international quiet days of each month Magsat was in orbit. The values of the magnetic field at midnight were also plotted for each of the quiet days. Results show that the zero level of the field fluctuates over the time interval considered. Statistical studies were made for the Kp and Ap indices and more sunspot numbers were obtained for the Magsat period. Satellite data are being thinned and reformatted to make them more amenable to testing the Dst and Sq corrections. The software for processing Magsat tapes is being tested with intermediate attitude data.

Source record↗
NASA NTRS1981

Timeline Resource Analysis Program (TRAP): User's manual and program document

The Timeline Resource Analysis Program (TRAP), developed for scheduling and timelining problems, is described. Given an activity network, TRAP generates timeline plots, resource histograms, and tabular summaries of the network, schedules, and resource levels. It is written in ANSI FORTRAN for the Honeywell SIGMA 5 computer and operates in the interactive mode using the TEKTRONIX 4014-1 graphics terminal. The input network file may be a standard SIGMA 5 file or one generated using the Interactive Graphics Design System. The timeline plots can be displayed in two orderings: according to the sequence in which the tasks were read on input, and a waterfall sequence in which the tasks are ordered by start time. The input order is especially meaningful when the network consists of several interacting subnetworks. The waterfall sequence is helpful in assessing the project status at any point in time.

Sessler, J. G.↗
NASA NTRS1981

A temporal/spectral analysis of small grain crops and confusion crops

Spectral data from the LANDSAT-2 satellite were used to study the growth cycles of fields of wheat, barley, alfalfa, corn, sunflowers, soybeans, rye, flax, oats, millet, grass, and hay. Signatures of pastures, trees, and idle fallow were also studied. The growth cycles were portrayed in the form of temporal plots of the greeness-brightness transformation vector applied to average channel pixel values within the fields, all of which were in three counties in North Dakota. The plots of each crop reveal characteristics which can be used in crop classification procedures.

Johnson, W. R.↗
NASA NTRS1981

Straight and chopped dc performance data for a General Electric 5BT 2366C10 motor and an EV-1 controller

Performance data on the General Electric 5BT 2366C10 series wound dc motor and EV-1 Chopper Controller is supplied for the electric vehicle manufacturer. Data is provided for both straight and chopped dc input to the motor, at 2 motor temperature levels. Testing was done at 6 voltage increments to the motor, and 2 voltage increments to the controller. Data results are presented in both tabular and graphical forms. Tabular information includes motor voltage and current input data, motor speed and torque output data, power data and temperature data. Graphical information includes torque-speed, motor power output-speed, torque-current, and efficiency-speed plots under the various operating conditions. The data resulting from this testing shows the speed-torque plots to have the most variance with operating temperature. The maximum motor efficiency is between 86% and 87%, regardless of temperature or mode of operation. When the chopper is utilized, maximum motor efficiency occurs when the chopper duty cycle approaches 100%.

Edie, P. C.↗
NASA NTRS1981

Straight and chopped dc performance data for a Prestolite MTC-4001 motor and a general electric EV-1 controller

Performance data on the Prestolite MTC-4001 series wound dc motor and General Electric EV-1 Chopper Controller is supplied for the electric vehicle manufacturer. Data are provided for both straight and chopped dc input to the motor, at 2 motor temperature levels. Testing was done at 6 voltage increments to the motor, and 2 voltage increments to the controller. Data results are presented in both tabular and graphical forms. Tabular information includes motor voltage and current input data, motor speed and torque output data, power data and temperature data. Graphical information includes torque-speed, motor power output-speed, torque-current, and efficiency-speed plots under the various operating conditions. The data resulting from this testing show the speed-torque plots to have the most variance with operating temperature. The maximum motor efficiency is between 76% and 82%, regardless of temperature or mode of operation.

Edie, P. C.↗
NASA NTRS1981

Analysis of starvation effects on hydrodynamic lubrication in nonconforming contacts

Numerical methods were used to determine the effects of lubricant starvation on the minimum film thickness under conditions of a hydrodynamic point contact. Starvation was effected by varying the fluid inlet level. The Reynolds boundary conditions were applied at the cavitation boundary and zero pressure was stipulated at the meniscus or inlet boundary. A minimum-fill-thickness equation as a function of both the ratio of dimensionless load to dimensionless speed and inlet supply level was determined. By comparing the film generated under the starved inlet condition with the film generated from the fully flooded inlet, an expression for the film reduction factor was obtained. Based on this factor a starvation threshold was defined as well as a critically starved inlet. The changes in the inlet pressure buildup due to changing the available lubricant supply are presented in the form of three dimensional isometric plots and also in the form of contour plots.

Brewe, D. E.↗
NASA NTRS1981

Metallic minerals, thermal histories and parent bodies of some xenolithic, ordinary chondrite meteorites

The metal grains were investigated in the hosts and lithic fragments of various petrologic types in four xenolithic chondrites using reflected-light microscopy and electron-probe analysis. The kamacite, taenite, tetrataenite, and troilite in Weston and Fayetteville have many textures; on a Wood plot of the central Ni content vs dimensions, the taenite content shows scatter if metal grains had cooled at rates of 10-1000 and 1-100 K/Myr through 700 K. In contrast, metallic minerals in Bhola and Mezo-Madaras have uniform textures and plot coherently, indicating cooling rates of 0.1 and 1 K/Myr, respectively, in the 700-600 K range. It is concluded that the host and xenoliths in these chondrites were cooled slowly after compaction; their clasts underwent peak metamorphic temperatures and slow cooling through 700 K in different environments.

Scott, E. R. D.↗
NASA NTRS1981

The formation and growth of sulfate aerosols in the stratosphere

The critical compositions, critical radii, and nucleation rates of sulfuric acid droplets formed through homogeneous heteromolecular nucleation process in the stratosphere under a variety of ambient conditions are calculated. Results are plotted as a function of H2SO4 concentration and H2O concentration so that characteristics of sulfate aerosols can be quickly estimated whenever environmental conditions are known. The effect of the uncertainty in the saturated vapor pressure of H2SO4 on the estimated properties of sulfate aerosols is elucidated. Plottings are presented that illustrate the relative importance of new particle formation by homogeneous nucleation vs growth by heteromolecular condensation on pre-existing nuclei in the stratosphere. The effects of ambient conditions, such as the concentrations of H2SO4 and H2O, the average stratospheric particle radius, and the number concentration of pre-existing nuclei on the relative importance of these two competing processes are discussed.

Yue, G. K.↗
NASA NTRS1981

Crop identification and leaf area index calculations with Landsat multitemporal data

Formulas are given to convert land-based vegetative canopy spectral reflectance measurements into Landsat digital counts in the four channels for a clear standard atmosphere. These formulas are shown to predict the curves found by plotting multitemporal Landsat trajectories. With correct interpretation, plots of channel 3 versus channel 4 Landsat data for crops are shown to yield information on both crop identification and crop leaf area index.

Chance, J. E.↗
NASA NTRS1981

Deconvolution of wide field-of-view radiometer measurements of earth-emitted radiation. II - Analysis of first year of Nimbus 6 ERB data

The theory of deconvolution considered by Smith and Green (1981) is applied to Nimbus 6 data in order to interpret the data with the maximum obtainable resolution. Attention is given to the data sample, sun-contaminated measurements, the measurement model, the deconvolution, the degree variance, the spherical harmonic coefficients, the geographical distribution of longwave radiation, time histories of zonal coefficients, and the effect of a grid system. Degree variance plots for 12 months of longwave radiation data show that the limit for a spherical harmonic representation of the Nimbus 6 wide field-of-view longwave data is 12th degree. The degree variance plots also reveal that most of the power is in the lower degree terms. Contour maps of the radiation field show the geographical distribution of earth emitted radiant exitance for each month.

Bess, T. D.↗
NASA NTRS1981

Velocity-space synthesis of ISEE-1 measurements of the three dimensional electron distribution function

A computer package which produces contour plots of the three dimensional electron distribution function measured by an electron spectrometer aboard ISEE-1 is described. Examples of the contour plots and an explanation of how to use the program, including the necessary computer code for running the program on the GSFC 360/91 computer is presented. The method by which the discrete measurements of the distribution function, given by points on the four dimensional surface are synthesized into a smooth surface in a three dimensional space which can be contoured is described. The velocity components are parallel and perpendicular to the magnetic field, respectively, in the proper frame of the electrons.

Fitzenreiter, R. J.↗
NASA NTRS1980

Consolidation of data base for Army generalized missile model

Data from plume interaction tests, nose mounted canard configuration tests, and high angle of attack tests on the Army Generalized Missile model are consolidated in a computer program which makes them readily accessible for plotting, listing, and evaluation. The program is written in FORTRAN and will run on an ordinary minicomputer. It has the capability of retrieving any coefficient from the existing DATAMAN tapes and displaying it in tabular or plotted form. Comparisons of data taken in several wind tunnels and of data with the predictions of Program MISSILE2 are also presented.

Klenke, D. J.↗