Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOLID STATE DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

The Influence of Local Distortions on Proton Mobility in Acceptor Doped Perovskites

Optimizing proton conduction in solids remains the most promising solution for achieving intermediate temperature (~750–1000 K) solid oxide fuel cell devices, and enabling selective membranes for H 2 separation. Proton conduction, a thermally activated process, exhibits its highest rates in yttrium (Y) acceptor doped BaZrO 3 at an optimal doping level of 20% Y. The presence of extended defects such as grain boundaries has typically generated a wide variability in reported conductivity values. This has hindered a fundamental mechanistic understanding of how (acceptor) doping levels correlate with the activation energy of protons to produce an optimal doping level for fast proton transport. While isolated dopants have been suggested as the primary source of proton trapping, our results indicate that it is the local dopant-density that matters. Here in this work, we show that increasing the local dopant density promotes localized lattice distortions in the presence of point defects such as oxygen-vacancies or proton interstitials. An increasing distortion amplitude traps the point defects more strongly in the form of polarons, forming defect-clusters at higher concentrations. This leads to a monotonic increase in the activation energy (and hence a decrease in proton mobility) as observed in our measurements. The optimum doping level can now be explained as a competition between increasing proton concentration with doping levels and increasing activation energy due to defect-clusters formed by defect-polarons. Based on our findings, we demonstrate how to improve proton conductivity in doped BaZrO 3 , by inhibiting this dopant-lattice polaronic interaction. Finally, this approach should be generally applicable for ionic conduction in perovskite oxides such as oxygen-ion conduction in solid-oxide fuel cells and alkali-ion conduction in solid-state batteries where carriers might get trapped as defect-polarons.

36 MATERIALS SCIENCE↗

Superconducting Quantum Refrigerator: Breaking and Rejoining Cooper Pairs with Magnetic Field Cycles

We propose a solid-state refrigeration technique based on repeated adiabatic magnetization and demagnetization cycles of a superconductor, which acts as the working substance. The gradual cooling down of a substrate (normal metal) in contact with the working substance is demonstrated for different initial temperatures of the substrate. Excess heat is given to a hot large-gap superconductor. The on-chip refrigerator works in a cyclic manner because of an effective thermal switching mechanism: heat transport between N-N versus N-S junctions is asymmetric because of the appearance of the energy gap. Furthermore, this switch permits selective cooling of the metal. We find that this refrigeration technique can cool down a 0.3 cm 3 block of Cu by almost 2 orders of magnitude starting from 200 mK, and down to about 1 mK starting from the base temperature of a dilution fridge (10 mK). The corresponding cooling power at 200 and 10 mK for a 1 × 1 cm 2 interface are 25 and 0.06 nW respectively, which scales with the area of the interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Time-dependent THMC properties and microstructural evolution of damaged rocks in excavation damage zone

Modeling coupled thermo-hydro-mechanical-chemical (THMC) processes in host rocks near high-level nuclear waste (HLW) repositories at various time scales is an extremely challenging task. The current study integrates experimental, theoretical, and numerical methods in assessing the evolution of excavation damage zone (EDZ) over time and its implication on the long-term migration of hazardous species. Argillite and rock salt and are the focus of this study. The first part of the report presents a novel time-dependent directional microcrack damage theory for generic brittle rocks. It features detailed statistical description of the microcracks within a damaged solid, permitting a direct upscaling of microscale processes such as crack growth kinetics, crack closure/opening, sliding friction to explain the macroscopic creep, nonlinear elasticity, shear dilation, and loading-unloading hysteresis. This provides a basic platform for describing the anisotropic mechanical and transport properties of damaged rocks during excavation and subsequent THMC loadings. The model is validated and numerically implemented to Finite Element (FE) package ABAQUS through the user-defined material (UMAT) interface and have demonstrated great potential in resolving the time-dependent and anisotropic evolution of damage in the EDZ. The second part of the report presents a multi-scale experimental effort in characterizing the thermal, hydraulic, and mechanical properties of Mancos shale and Avery Island salt. For the Mancos shale, triaxial compression tests are performed at different confining pressures and temperatures to probe its thermomechanical properties relevant to HLW repositories. The obtained stress-strain data are interpreted using the proposed directional damage theory. Post-test specimens are subjected to gas permeability tests to reveal the correlation between permeability and the degree of microcracking. At microscale, temperature-controlled nanoindentation tests are performed and found a linear correlation between fracture toughness and elastic modulus from 25°C to 300°C. For Avery Island salt, we have designed and manufactured a novel relative-humidity controlled uniaxial creep device. Long-term creep tests at low stresses (< 5 MPa) are performed at different levels of relative humidity (RH). Besides confirming the much higher creep rates as one would expect through extrapolating the high-stress creep data, the results reveal that the steady-state creep rate of rock salt is strongly dependent on the ambient RH, an aspect that is often neglected in the literature. Both behaviors can be attributed to the pressure-solution creep mechanism which dominates at low stress and high RH levels. The third part of the report explores a set of numerical strategies in modeling the THMC behavior of porous geomaterials. A fully implicit, monolithic FE solution that can flexibly interface with different material models and coupling mechanisms for THMC problems is developed and verified through the ABAQUS user-defined element (UEL) interface. The scheme is used to study the THM response of a hypothetical HLW storage site with reference to an existing in-situ heater test. Strategies for integrating the UEL and the microcrack UMAT are suggested. Another numerical endeavor of this study is to implement a higher-order asymptotic homogenization method to account for the heterogeneous porous structures. The same method is then extended to perform microstructure-informed thermo-mechanical modeling of generalized continua. The above outcomes of this project provide a strong thrust towards enhancing the fundamental understanding and modeling capability of the long-term evolution of host rocks in EDZ, thus helping achieve the design goal of 1-million-year isolation of high-level nuclear wastes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Heteroepitaxial VO{sub 2} thin films on GaN: Structure and metal-insulator transition characteristics

Monolithic integration of correlated oxide and nitride semiconductors may open up new opportunities in solid-state electronics and opto-electronics that combine desirable functional properties of both classes of materials. Here, we report on epitaxial growth and phase transition-related electrical properties of vanadium dioxide (VO{sub 2}) thin films on GaN epitaxial layers on c-sapphire. The epitaxial relation is determined to be (010){sub vo{sub 2}} parallel (0001){sub GaN} parallel (0001){sub A1{sub 2O{sub 3}}} and [100]{sub vo{sub 2}} parallel [1210]{sub GaN} parallel [0110]{sub A1{sub 2O{sub 3}}} from x-ray diffraction. VO{sub 2} heteroepitaxial growth and lattice mismatch are analyzed by comparing the GaN basal plane (0001) with the almost close packed corrugated oxygen plane in vanadium dioxide and an experimental stereographic projection describing the orientation relationship is established. X-ray photoelectron spectroscopy suggests a slightly oxygen rich composition at the surface, while Raman scattering measurements suggests that the quality of GaN layer is not significantly degraded by the high-temperature deposition of VO{sub 2}. Electrical characterization of VO{sub 2} films on GaN indicates that the resistance changes by about four orders of magnitude upon heating, similar to epitaxial VO{sub 2} films grown directly on c-sapphire. It is shown that the metal-insulator transition could also be voltage-triggered at room temperature and the transition threshold voltage scaling variation with temperature is analyzed in the framework of a current-driven Joule heating model. The ability to synthesize high quality correlated oxide films on GaN with sharp phase transition could enable new directions in semiconductor-photonic integrated devices.

36 MATERIALS SCIENCE↗

Passivation of Nickel Vacancy Defects in Nickel Oxide Solar Cells by Targeted Atomic Deposition of Boron

Localized trap states, which are deleterious to the performance of many solar-energy materials, often originate from the under-coordinated bonding associated with defects. Recently, the concept of targeted atomic deposition (TAD) was introduced as a process that permits the passivation of trap states using a vapor-phase precursor that selectively reacts with only the surface defect sites. In this work, we demonstrate the passivation of nickel oxide (NiO) with the TAD process using diborane gas for selective, low-temperature deposition of boron (B) under continuous flow in a chemical vapor deposition (CVD) system. NiO is a ubiquitous cathode material used in dye-sensitized solar cells (DSSCs), organic photovoltaic devices, and organo-lead halide perovskite solar cells. The deposition of B at 100 °C is shown to follow first-order kinetics, exhibiting saturation at a B to Ni atomic ratio of ~10%. Electrochemical measurements, combined with first-principles calculations, indicate that B passivates Ni vacancy defects by partially saturating the bonding of the oxygen atoms adjacent to the vacancy. p-Type DSSCs were fabricated using TAD-treated NiO and show a modest improvement in photovoltaic performance metrics. The results highlight the potential ubiquity of TAD passivation with a range of atomic precursors and vapor-phase processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Band gap opening in strongly compressed diamond observed by x-ray energy loss spectroscopy

The extraordinary mechanical and optical properties of diamond are the basis of numerous technical applications and make diamond anvil cells a premier device to explore the high-pressure behavior of materials. However, at applied pressures above a few hundred GPa, optical probing through the anvils becomes difficult because of the pressure-induced changes of the transmission and the excitation of a strong optical emission. Such features have been interpreted as the onset of a closure of the optical gap in diamond, and can significantly impair spectroscopy of the material inside the cell. In contrast, a comparable widening has been predicted for purely hydrostatic compressions, forming a basis for the presumed pressure stiffening of diamond and resilience to the eventual phase change to BC8. We here present the first experimental evidence of this effect at geo-planetary pressures, exceeding the highest ever reported hydrostatic compression of diamond by more than 200 GPa and any other measurement of the band gap by more than 350 GPa. We here apply laser driven-ablation to create a dynamic, high pressure state in a thin, synthetic diamond foil together with frequency-resolved x-ray scattering as a probe. The frequency shift of the inelastically scattered x-rays encodes the optical properties and, thus, the behavior of the band gap in the sample. Using the ultra-bright x-ray beam from the Linac Coherent Light Source (LCLS), we observe an increasing direct band gap in diamond up to a pressure of 370 GPa. This finding points to the enormous strains in the anvils and the impurities in natural Type Ia diamonds as the source of the observed closure of the optical window. Our results demonstrate that diamond remains an insulating solid to pressures approaching its limit strength.

36 MATERIALS SCIENCE↗

Design of solid state neutral particle analyzer array for National Spherical Torus Experiment-Upgrade

A new compact, multi-channel Solid State Neutral Particle Analyzer (SSNPA) diagnostic based on silicon photodiode array has been designed and is being fabricated for the National Spherical Torus Experiment-Upgrade (NSTX-U). The SSNPA system utilizes a set of vertically stacked photodiode arrays in current mode viewing the same plasma region with different filter thickness to obtain fast temporal resolution (∼120 kHz bandwidth) and coarse energy information in three bands of >25 keV, >45 keV, and >65 keV. The SSNPA system consists of 15 radial sightlines that intersect existing on-axis neutral beams at major radii between 90 and 130 cm, 15 tangential sightlines that intersect new off-axis neutral beams at major radii between 120 and 145 cm. These two subsystems aim at separating the response of passing and trapped fast ions. In addition, one photodiode array whose viewing area does not intersect any neutral beams is used to monitor passive signals produced by fast ions that charge exchange with background neutrals.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Crickets{sup TM} and Curies: Lessons Learned from the Steel Industry - 18221

The global nuclear power industry, and to a lesser extent, the decommissioning and demolition of old nuclear weapons plants, obviously present challenges to those in the radioactive waste management field. Some if not many of these challenges have already been dealt with, and resolved, in the steel industry, including its recycling component. This paper presents proven state-of-the-art radiation detection systems used in steel and related recycling facilities, emphasizing current, reliable and flexible technologies for characterization, volume reduction, and remote handling of recyclable solid wastes contaminated and, just as important, not contaminated, with a wide range of radioactive isotopes. It will also cover features of remotely operated waste handling equipment effective in reducing or eliminating exposure of workers engaged in decontamination and demolition work on active and/or inactive nuclear installations. The industry group identified above has a long-standing policy regarding any radioactivity in potentially recyclable as well as waste materials it receives: if it is detected, it is rejected. The US Steel Manufacturers Association (SMA) put it this way in one of their Public Policy Statements: 'SMA members have not, and will not, accept scrap that is known to be radioactively contaminated' (emphasis included in the original) (1). This policy, adopted around the globe, obviously has major implications for decommissioning and demolition projects. To put it bluntly, if rad-contaminated metal, concrete, or other materials are sent to a facility for possible recycling, reuse or even disposal, they may well be rejected. If so, the materials will be returned to the generator--at the generator's cost-and a new solution will have to be found. This also results in additional costs for the generator. Facilities in the steel making and metal recycling industries have access to, and routinely count on, a wide range of proven detection technologies and techniques for monitoring incoming shipments and sorting the materials in them. The approaches range from using sensitive handheld instruments for pinpointing and isolating small devices such as isotope-containing gauges and radium dials all the way up to technologies effective for large volumes and weights of contaminated construction and demolition material. In this latter realm, the most suitable, robust, and field-proven system for decommissioning and demolition work is a radiation detection system fitted to a grappling and/or magnetic device, known as the Crickets{sup TM} technology, which automatically scans bulk material with no added effort or time in material handling operations. Highly versatile, a Crickets{sup TM} system can be put to work on any material-handling system, including grapples handling volumes ranging from 1 up to 18 cubic yards, while detecting radioactivity in real-time over a very wide dose range, from nSv to Sv levels. Other field-proven real-time measuring radiation detection devices can be fixed to conveyor belts with traverse speeds up 3 meters/second, also measuring in real time and over the same dose range, allowing both recyclable and waste materials with a pre-set level of radioactivity to be diverted off the belt. Finally, there are highly sensitive radiation portal installations for detecting radiation from materials being transported by vehicles, including those with roll-offs, dump trailers, and other containers, again in real-time and for the same dose ranges. For vehicles, the speed must be carefully controlled-the vehicles need to travel from 5 to 10 km/h through the scanning zone to ensure that maximum detection capability is maintained. When radiation detection systems at recycling and steel making facilities detect radioactive material in an incoming shipment, these facilities have a zero tolerance for accepting the cargo. Therefore, it is imperative that material from a demolition operation that is slated to be sent for recycling or other reuse be checked at the point of demolition at similar detection levels to avoid possible rejection later of a shipment because of its radioactivity. In addition to measuring overall radiation levels (for example, total gamma), when necessary, combinations of different radiation detection media can be used to detect the presence and intensities of specific isotopes such as U-235, Cs-137, Co-60, Am-241, etc., again in real-time and over a similar dose range. These detection technologies can be fixed or transportable. More important for the rad-waste management profession, this overall systems approach can be tailored and adapted during use on-site in any dismantling, demolition or remediation project, to allow materials to be thoroughly scanned before being released to the recycling stream for reuse, or to appropriate long-term storage and disposal facilities. Potentially recyclable materials with contamination such as steel beams and rebar will set off alarms at recycling facilities, resulting in unnecessary added expenses to the generator, primarily due to increased transportation costs, time delays and additional rad-waste handling and disposal charges. Additionally, there are situations where relatively lightly contaminated materials, once identified and appropriately characterized, can be reused in new construction applications, such as concrete from demolition being used in the base layer for roads or recycled steel used for repair or construction of bridges. In other cases, specific smaller volumes can be sent to specialized rad-waste disposal sites. These radiation detection systems can also be custom tailored to ensure proper handling and disposition of contaminated materials destined for reuse in specific applications where, for example, acceptable levels of radioactivity in NORM or TENORM can be reused or safely disposed of. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Improving the Carrier Lifetime of Tin Sulfide via Prediction and Mitigation of Harmful Point Defects

Tin monosulfide (SnS) is an emerging thin-film absorber material for photovoltaics. An outstanding challenge is to improve carrier lifetimes to >1 ns, which should enable >10% device efficiencies. However, reported results to date have only demonstrated lifetimes at or below 100 ps. In this study, we employ defect modeling to identify the sulfur vacancy and defects from Fe, Co, and Mo as most recombination-active. We attempt to minimize these defects in crystalline samples through high-purity, sulfur-rich growth and experimentally improve lifetimes to >3 ns, thus achieving our 1 ns goal. This framework might prove effective for unlocking the lifetime potential in other emerging thin-film materials by rapidly identifying and mitigating lifetime-limiting point defects.

14 SOLAR ENERGY↗

Barriers to carrier transport in multiple quantum well nitride-based c -plane green light emitting diodes

The presence of alloy disorder in III-nitride materials has been demonstrated to play a significant role in device performance through effects such as carrier localization and carrier transport. Relative to blue light emitting diodes (LEDs), these effects become more severe at green wavelengths. Because of the potential fluctuations that arise due to alloy disorder, full three-dimensional (3D) simulations are necessary to accurately relate materials properties to device performance. We demonstrate experimentally and through simulation that increased quantum well (QW) number in c-plane green LEDs contributes to excess driving voltage, and therefore reduced electrical efficiency. Experimentally, we grew an LED series with the number of QWs varying from one to seven and observed a systematic increase in voltage with the addition of each QW. Trends in LED electrical properties obtained from 3D simulations, which account for the effects of random alloy fluctuations, are in agreement with experimental data. Agreement is achieved without the need for adjusting polarization parameters from their known values. Finally, from these results, we propose that the polarization induced barriers at the GaN/InGaN (lower barrier/QW) interfaces and the sequential filling of QWs both contribute significantly to the excess forward voltage in multiple QW c-plane green LEDs.

42 ENGINEERING↗

Connected Lighting Systems Efficiency Study: PoE Cable Energy Losses, Part 2

DOE published a report in November 2017 (herein referred to as “Part 1”) summarizing the results of an exploratory study investigating power losses in Ethernet cables used between PoE switches and luminaires in PoE connected lighting systems. Testing was conducted at the Pacific Northwest National Laboratory (PNNL) Connected Lighting Test Bed (CLTB) in September 2017. The results were analyzed to explore the impact of cable selection on PoE lighting system energy efficiency, as well as the effectiveness of guidelines published by the American National Standards Institute (ANSI) C137 Lighting Systems Committee in 2017. The guidance offered in ANSI C137.3-2017 was found to be effective in limiting cable energy losses to 5% in PoE lighting applications, provided that the average cable length on a project does not exceed 50 m. This Part 2 report summarizes the results of a continued investigation of the power losses in Ethernet cables used between PoE switches and luminaires in PoE connected lighting systems. Testing was conducted at the PNNL CLTB in July-August 2018. A test setup comprising a PoE switch, a set of luminaires, and a reference meter was again used to test multiple cable models of varying design. The results were analyzed to explore the impact of cable selection and installation practices (e.g., cable bending, cable bundling, and installation in conduit) on PoE lighting system energy efficiency, as well as the effectiveness of the ANSI C137.3 guidelines. Notably, three cables—two of which were shielded—were previously excluded from the Part 1 study due to compatibility issues. All three cables were included in this Part 2 study, along with a fourth model cable introduced in Part 2. In addition, whereas no patch cords were used in Part 1, patch cords were used in some Part 2 testing. The ANSI C137.3 guidance was again shown to effectively limit power losses to less than 5% in the cables tested (varying in AWG, Category, shielding, fire rating, and manufacturer), and AWG again proved to be the most important cable design variable for energy performance, as expected. However, these findings should not be construed as being representative of all cable models and installation practices. For example, energy losses would be greater when cables are connected to patch cords, bundled in conduit, and loaded with powered devices (PDs) approaching 100 W input power. The other key finding was that with 44 W luminaires as PDs and room ambient temperatures below 30°C, cable energy losses were not substantially increased by cable bending or bundling in uninsulated conduit. However, environments with higher ambient temperatures will have greater energy losses due to increased conductor DCR. In addition, product selection and installation practices will have increased importance as PDs approaching 100 W input power—conveyed by a single Ethernet cable—are introduced following publication of the forthcoming Institute of Electrical and Electronics Engineers (IEEE) Standard 802.3bt. The report also provides recommendations and next steps, which include plans for additional PoE cable energy losses testing with higher-power PDs to more fully explore the potential of PoE lighting systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Electron Emission Spectroscopy of III-N Semiconductor Devices

Gallium nitride (GaN) has proven to be a semiconductor material system that is ideal for the development of lasers and light-emitting diodes (LEDs) with emission wavelengths spanning the visible spectrum. In particular, the prevalence of white LEDs has been made possible by pairing GaN-based optoelectronic devices emitting at 450 nm (blue) with phosphors for down-conversion. The efficiency of these devices, although better than alternatives, is limited at high current densities (efficiency droop), elevated temperatures (thermal droop) and is markedly worse at longer wavelengths. Understanding the physical origins of these efficiency problems can provide a pathway for engineering solutions to these long-standing issues. Despite extensive efforts to improve and understand these limitations, the unambiguous identification of these efficiency loss mechanisms has remained an open topic of research. Most studies of the efficiency loss mechanisms in GaN LEDs rely on an indirect measurement of carrier dynamics by analysis of the emitted light. The inadequacy of these indirect measurements has motivated the development of an electron spectroscopy technique, capable of directly probing several electron transport and recombination mechanisms in GaN-based optoelectronic devices. In 2013, electron emission spectroscopy (EES) was used for the first time to measure high energy electrons generated via Auger recombination in the active region of an LED. This result brought an end to the longstanding controversy over the causes for efficiency droop at high carrier densities. Our analysis of the kinetic energy of vacuum emitted electrons from GaN-based LEDs xiii has unambiguously identified carrier overshoot as the dominant mechanism responsible for thermal droop. Control experiments from p-n diodes show evidence for a previously unknown hot carrier generating process, likely trap-assisted Auger recombination (TAAR) occurring in AlGaN/GaN barrier heterostrucutres. We also discuss the possibility of TAAR occurring in InGaN quantum wells through examination of low-efficiency LEDs grown by molecular beam epitaxy. Finally, we discuss preliminary EES results regarding long wavelength GaN LEDs as well as the first EES measurements from semipolar ($20\bar2\bar1$) GaN LEDs and p-n diodes.

light emitting diodes, solid state lighting↗

Atomic‐Scale Mechanisms of Nucleation and Stabilization in CuCrO 2 and CuFeO 2 Delafossite Thin Films on Al 2 O 3

Abstract Delafossite thin films exhibit a range of intriguing physical properties derived from their layered structure, which consists of alternating noble metal ( A + ) and ( B O 2 − ) sublayers in an AB O 2 stoichiometry. The integration of these properties into functional devices requires the successful epitaxial growth of delafossites as thin films on appropriate substrates. Unfortunately, their unique lattice geometry complicates growth, as different delafossites display variable behavior on the same substrate, often unrelated to lattice mismatch. This suggests the presence of yet unidentified stabilization mechanisms that enable the selective growth of certain delafossites, allowing them to be grown either as films themselves or to be used as buffer layers for subsequent deposition. In this study, advanced scanning transmission electron microscopy (STEM) is employed to investigate the nucleation mechanisms governing the stable growth of Cu‐based delafossites on Al 2 O 3 , specifically CuCrO 2 and CuFeO 2 thin films synthesized via molecular‐beam epitaxy. These findings reveal that a combination of a misfit dislocation network at the interface and monolayer‐deep chemical intermixing effectively relieves lattice mismatch strain. This mechanism, which differs fundamentally from that observed in Pd‐based delafossites, provides key insights into the controlled epitaxy of delafossite materials.

Scheid, Anna [Max Planck Institute for Solid State↗

A Multi-modal Approach to Understanding Degradation of Organic Photovoltaic Materials

State-of-the-art organic photovoltaic (OPV) materials are composed of complex, chemically diverse polymeric and molecular structures that form highly intricate solid-state interactions, collectively yielding exceptional tunability in performance and aesthetics. These properties are especially attractive for semitransparent power-generating windows or shades in living environments, greenhouses, or other architectural integrations. However, before such a future is realized, a broader and deeper understanding of property stability must be acquired. Stability during operating and environmental conditions is critical, namely, material color steadfastness, optoelectronic performance retention, morphological rigidity, and chemical robustness. To date, no single investigation encompasses all four distinct, yet interconnected, metrics. Here, we present a multimodal strategy that captures a dynamic and interconnected evolution of each property during the course of an accelerated photobleaching experiment. We demonstrate this approach across relevant length scales (from molecular to visual macroscale) using X-ray photoelectron spectroscopy, grazing-incidence X-ray scattering, microwave conductivity, and time-dependent photobleaching spectroscopies for two high-performance semitransparent OPV blends—PDPP4T:PC 60 BM and PDPP4T:IEICO-4F, with comparisons to the stabilities of the individual components. We present direct evidence that specific molecular acceptor (fullerene vs nonfullerene) designs and the resulting donor–acceptor interactions lead to distinctly different mechanistic routes that ultimately arrive at what is termed “OPV degradation.” We directly observe a chemical oxidation of the cyano endcaps of the IEICO-4F that coincides with a morphological change and large loss in photoconductivity while the fullerene acceptor-containing blend demonstrates a significantly greater fraction of oxygen uptake but retains 55% of the photoconductivity. Finally, this experimental roadmap provides meaningful guidance for future high-throughput, multimodal studies, benchmarking the sensitivity of the different analytical techniques for assessing stability in printable active layers, independent of complete device architectures.

14 SOLAR ENERGY↗

SIDIS Unpolarized Cross Sections from a 3 He Target with the Solenoidal Large Intensity Device at JLab

In this paper we present a detailed impact study of semi-inclusive deep inelastic scattering unpolarized cross sections' measurements using the proposed SoLID apparatus at Jefferson Lab. This type of data, collected at large Bjorken x bj , moderate values of Q 2 and small values of the transverse momentum of produced hadrons, P hT , allows to study transverse momentum dependent (TMD) parton distribution and fragmentation functions in a still poorly explored region. We present the projected results for charged light mesons based on simulated data. For the azimuthal-angle integrated cross sections we adopt the TMD framework up to the next-to-next-to-next-to-leading-logarithmic accuracy, while a simpler TMD parton model is employed for the study of azimuthal angular dependencies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Polyhedral Specular Reflector: A Spectrum-Splitting Multijunction Design to Achieve Ultrahigh ( >50%) Solar Module Efficiencies

The most feasible pathway to record 50% efficiency photovoltaic devices is by utilizing many (>4) junctions to minimize thermalization and nonabsorption losses. Here we propose a spectrum-splitting design, the polyhedral specular reflector (PSR), that employs an optical architecture to divide and concentrate incident sunlight, allowing the incorporation of more junctions compared with traditional monolithic architectures. This paper describes the PSR design and indicates the requirements to achieve a 50% efficiency module by coupling robust cell, optical, and electrical simulations. We predict that a module comprised of the seven subcells with an average external radiative efficiency of at least 3%, an optical architecture capable of a splitting efficiency of at least 88% and 300× concentration, small (≤1 μm) metallic fingers for subcell contact, and a state-of-the-art power conditioning system (>98% efficiency) can achieve a module efficiency of 50%, a record for both multijunction cells and modules. We also discuss the flexibility of the design and explore how adjusting the size and type of concentrators can still yield record module efficiencies (>40%).

solar (photovoltaic), solid state lighting, phonon↗

Insights on the Synthesis, Crystal and Electronic Structures, and Optical and Thermoelectric Properties of Sr 1– x Sb x HfSe 3 Orthorhombic Perovskite

We report single-phase polycrystalline powders of Sr 1–x Sb x HfSe 3 (x = 0, 0.005, 0.01), a new member of the chalcogenide perovskites, were synthesized using a combination of high temperature solid-state reaction and mechanical alloying approaches. Structural analysis using single-crystal as well as powder X-ray diffraction revealed that the synthesized materials are isostructural with SrZrSe 3 , crystallizing in the orthorhombic space group Pnma (#62) with lattice parameters a = 8.901(2) Å; b = 3.943(1) Å; c = 14.480(3) Å; and Z = 4 for the x = 0 composition. Thermal conductivity data of SrHfSe 3 revealed low values ranging from 0.9 to 1.3 W m –1 K –1 from 300 to 700 K, which is further lowered to 0.77 W m –1 K –1 by doping with 1 mol % Sb for Sr. Electronic property measurements indicate that the compound is quite insulating with an electrical conductivity of 2.9 S/cm at 873 K, which was improved to 6.7 S/cm by 0.5 mol % Sb doping. Thermopower data revealed that SrHfSe 3 is a p-type semiconductor with thermopower values reaching a maximum of 287 μV/K at 873 K for the 1.0 mol % Sb sample. The optical band gap of Sr 1–x Sb x HfSe 3 samples, as determined by density functional theory calculations and the diffuse reflectance method, is ~1.00 eV and increases with Sb concentration to 1.15 eV. Careful analysis of the partial densities of states (PDOS) indicates that the band gap in SrHfSe 3 is essentially determined by the Se-4p and Hf-5d orbitals with little to no contribution from Sr atoms. Typically, band edges of p- and d-character are a good indication of potentially strong absorption coefficient due to the high density of states of the localized p and d orbitals. This points to potential application of SrHfSe3 as absorbing layer in photovoltaic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗