Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar Potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Formation of BaSi{sub 2} heterojunction solar cells using transparent MoO{sub x} hole transport layers

Heterojunction solar cells that consist of 15 nm thick molybdenum trioxide (MoO{sub x}, x < 3) as a hole transport layer and 600 nm thick unpassivated or passivated n-BaSi{sub 2} layers were demonstrated. Rectifying current-voltage characteristics were observed when the surface of BaSi{sub 2} was exposed to air. When the exposure time was decreased to 1 min, an open circuit voltage of 200 mV and a short circuit current density of 0.5 mA/cm{sup 2} were obtained under AM1.5 illumination. The photocurrent density under a reverse bias voltage of −1 V reached 25 mA/cm{sup 2}, which demonstrates the significant potential of BaSi{sub 2} for solar cell applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A contactless in situ EFISH method for measuring electrostatic potential profile of semiconductor/electrolyte junctions

In photoelectrochemical cells, promising devices for directly converting solar energy into storable chemical fuels, the spatial variation of the electrostatic potential across the semiconductor–electrolyte junction is the key parameter that determines the cell performance. In principle, electric field induced second harmonic generation (EFISH) provides a contactless in situ spectroscopic tool to measure the spatial variation of electrostatic potential. However, the total second harmonic generation (SHG) signal contains the contributions of the EFISH signals of semiconductor space charge layer and the electric double layer, in addition to the SHG signal of the electrode surface. The interference of these complex quantities hinders their analysis. In this work, to understand and deconvolute their contributions to the total SHG signals, bias-dependent SHG measurements are performed on the rutile TiO2(100)–electrolyte junction as a function of light polarization and crystal azimuthal angle (angle of the incident plane relative to the crystal [001] axis). A quadratic response between SHG intensity and the applied potential is observed in both the accumulation and depletion regions of TiO2. The relative phase difference and amplitude ratio are extracted at selected azimuthal angles and light polarizations. At 0° azimuthal angle and s-in–p-out polarization, the SHG intensity minimum has the best match with the TiO2 flatband potential due to the orthogonal relative phase difference between bias-dependent and bias-independent SHG terms. We further measure the pH-dependent flatband potential and probe the photovoltage under open circuit conditions using the EFISH technique, demonstrating the capability of this contactless method for measuring electrostatic potential at semiconductor–electrolyte junctions.

Chemistry↗

Ares V: Application to Solar System Scientific Exploration

The development of the Ares V launch vehicle will provide levels of performance unseen since the days of Apollo. This capability, like the Saturn V before it, is being developed primarily for crewed lunar missions. However, the tremendous jump in performance offered by the Ares V launch system has tremendous potential for the furtherance of robotic solar system exploration missions as well. Preliminary performance assessments indicate that Ares V could deliver 5 times the payload to Mars as compared to the most capable US expendable launch vehicle available today. Beyond Mars, the outer planets offer a number of high-priority investigations with compelling science. Presently, missions to these destinations are only achievable using indirect flights with gravity assist trajectories and, in many cases, suffer from long flight times. An Ares V with an upper stage could capture these missions using direct flights with shorter interplanetary transfer times that would enable extensive in situ investigations and possibly the return of samples to Earth. This paper lays out an estimate of Ares V performance for moderate and high C3 missions, and goes on to discuss a range of revolutionary mission concepts that could be enabled by this significant in-crease in launch capability.

Elliott, John↗

Influence of radiant energy exchange on the determination of convective heat transfer rates to Orbiter leeside surfaces during entry

Temperatures measured at the aerodynamic surface of the Orbiter's thermal protection system (TPS), and calorimeter measurements, are used to determine heating rates to the TPS surface during atmospheric entry. On the Orbiter leeside, where convective heating rates are low, it is possible that a significant portion of the total energy input may result from solar radiation, and for the wing, cross radiation from the hot (relatively) Orbiter fuselage. In order to account for the potential impact of these sources, values of solar- and cross-radiation heat transfer are computed, based upon vehicle trajectory and attitude information and measured surface temperatures. Leeside heat-transfer data from the STS-2 mission are presented, and the significance of solar radiation and fuselage-to-wing cross-radiation contributions to total energy input to Orbiter leeside surfaces is assessed.

Throckmorton, D. A.↗

Module Hipot and ground continuity test results

Hipot (high voltage potential) and module frame continuity tests of solar energy conversion modules intended for deployment into large arrays are discussed. The purpose of the tests is to reveal potentially hazardous voltage conditions in installed modules, and leakage currents that may result in loss of power or cause ground fault system problems, i.e., current leakage potential and leakage voltage distribution. The tests show a combined failure rate of 36% (69% when environmental testing is included). These failure rates are believed easily corrected by greater care in fabrication.

Griffith, J. S.↗

Life Cycle Review of Scalable Perovskite Solar Cell Pathways

This paper presents estimations of life-cycle energy burden and potential environmental and health impacts of emerging scalable single-junction and tandem perovskite solar cells (PSC). Life cycle analysis (LCA) is the primary framework for assessing potential environmental impacts of new technologies, such as perovskites, and we expect that it would be used to guide improvements in industrial production in order to reduce life-cycle energy burden and environmental and health impacts. Thus, we identified the most promising single-junction and tandem PSC architectures, developing life-cycle inventories (LCIs) that include only materials and energy processes that can be scaled up from the lab- to industrial-scale production. Subsequently, LCA is applied to characterize, quantify and compare the resulting life-cycle impacts and comparisons are made with previously published results.

perovskites, Life Cycle Analysis, single-junction,↗

Correlation of ISS Electric Potential Variations with Mission Operations

Spacecraft charging on the International Space Station (ISS) is caused by a complex mix of the low Earth orbit plasma environment, space weather events, operations of the high voltage solar arrays, and changes in the ISS configuration and orbit parameters. Measurements of the ionospheric electron density and temperature along the ISS orbit and variations in the ISS electric potential are obtained from the Floating Potential Measurement Unit (FPMU) suite of four plasma instruments (two Langmuir probes, a Floating Potential Probe, and a Plasma Impedance Probe) on the ISS. These instruments provide a unique capability for monitoring the response of the ISS electric potential to variations in the space environment, changes in vehicle configuration, and operational solar array power manipulation. In particular, rapid variations in ISS potential during solar array operations on time scales of tens of milliseconds can be monitored due to the 128 Hz sample rate of the Floating Potential Probe providing an interesting insight into high voltage solar array interaction with the space plasma environment. Comparing the FPMU data with the ISS operations timeline and solar array data provides a means for correlating some of the more complex and interesting ISS electric potential variations with mission operations. In addition, recent extensions and improvements to the ISS data downlink capabilities have allowed more operating time for the FPMU than ever before. The FPMU was operated for over 200 days in 2013 resulting in the largest data set ever recorded in a single year for the ISS. This presentation will provide examples of a number of the more interesting ISS charging events observed during the 2013 operations including examples of rapid charging events due to solar array power operations, auroral charging events, and other charging behavior related to ISS mission operations.

Willis, Emily M.↗

Correlation of ISS Electric Potential Variations with Mission Operations

Spacecraft charging on the International Space Station (ISS) is caused by a complex combination of the low Earth orbit plasma environment, space weather events, operations of the high voltage solar arrays, and changes in the ISS configuration and orbit parameters. Measurements of the ionospheric electron density and temperature along the ISS orbit and variations in the ISS electric potential are obtained from the Floating Potential Measurement Unit (FPMU) suite of four plasma instruments (two Langmuir probes, a Floating Potential Probe, and a Plasma Impedance Probe) on the ISS. These instruments provide a unique capability for monitoring the response of the ISS electric potential to variations in the space environment, changes in vehicle configuration, and operational solar array power manipulation. In particular, rapid variations in ISS potential during solar array operations on time scales of tens of milliseconds can be monitored due to the 128 Hz sample rate of the Floating Potential Probe providing an interesting insight into high voltage solar array interaction with the space plasma environment. Comparing the FPMU data with the ISS operations timeline and solar array data provides a means for correlating some of the more complex and interesting ISS electric potential variations with mission operations. In addition, recent extensions and improvements to the ISS data downlink capabilities have allowed more operating time for the FPMU than ever before. The FPMU was operated for over 200 days in 2013 resulting in the largest data set ever recorded in a single year for the ISS. In this paper we provide examples of a number of the more interesting ISS charging events observed during the 2013 operations including examples of rapid charging events due to solar array power operations, auroral charging events, and other charging behavior related to ISS mission operations.

Willis, Emily M.↗

Performance Comparisons and Down Selection of Small Motors for Two-Blade Heliogyro Solar Sail 6U CubeSat

This report compiles a review of 130 commercial small scale motors (piezoelectric and electric motors) and almost 20 researched-type small scale piezoelectricmotors for potential use in a 2 blades Heliogyro Solar Sail 6U CubeSat. In this application, a motor and gearhead (drive system) will deploy a roll of solar sailthin film (2 um thick)accommodated in a 2U CubeSat (100 x 200 x 100 mm) housing. The application requirements are: space rated, output torque at fulldeployment of 0.8 Nm, reel speed of 3 rpm, drive system weight limited to 150 grams, diameter limited to 50 mm, and the length not to exceed 40 mm. The 50mm diameter limit was imposed as motors with larger diameters would likely weigh too much and use more space on the satellite wall. This would limit theamount of the payload. The motors performance are compared between small scale, volume within 3x102 cm3 (3x105 mm3), commercial electric DC motors,commercial piezoelectric motors, and researched-type (non-commercial) piezoelectric motors extracted from scientific and product literature. The comparisonssuggest that piezoelectric motors without a gearhead exhibit larger output torque with respect to their volume and weight and require less input power toproduce high torque. A commercially available electric motor plus a gearhead was chosen through a proposed selection process to meet the applications designrequirements.

Wiwattananon, Peerawan↗

Quantitative Electroluminescence Imaging Analysis for Performance Estimation of PID-Influenced PV Modules

An empirical method for estimating relative power losses caused by potential-induced degradation (PID) for p-type solar cells and modules using quantitative electroluminescence (EL) analysis (QELA) is presented. First, EL images are corrected for camera- and perspective distortion. The relative power loss map is then calculated from the logarithmic ratio of two EL images, taken either before and after PID degradation or at different applied currents. Only the cell average of the resulting power loss map is evaluated. The highest power loss across each string is averaged to obtain the overall power loss. Consequently, for modules with three strings, three cells are averaged. The resulting power loss depends on the current applied. The conversion to equivalent irradiance allows for comparison of measured and estimated device performance. The analysis of roughly 2000 EL images and related current-voltage (I-V) curves indicates a good agreement between flash-test-measured and performance estimated using QELA. A relative root mean square error of 1-3% can be achieved.

14 SOLAR ENERGY↗

Enhanced current collection in 1.7 eV GaInAsP solar cells grown on GaAs by metalorganic vapor phase epitaxy

Quaternary GaInAsP solar cells with a bandgap of ~1.7 eV offer an attractive Al-free alternative to AlGaAs solar cells for integration in next generation of III-V multijunction solar cells with five or more junctions. Development of a high quality 1.7 eV solar cell is also highly sought for III-V/Si tandem solar cells. In this work, we systematically investigate the impact of varying base thicknesses and doping concentrations on the carrier collection and performance of 1.7 eV GaInAsP solar cells. The photoresponse of these cells is found to be very sensitive to p-type zinc doping concentration in the base layer. Prototype 1.7 eV GaInAsP n-i-p solar cell designs are demonstrated that leverage enhanced depletion width as an effective method to achieve peak quantum efficiency exceeding 90%. We also show the importance of optimal i-layer thickness as a critical parameter to reduce the drop in fill-factor (FF) due to field-aided collection. Furthermore, we demonstrate substantial improvement in the cell performance when the GaInAsP base layer is grown at 650 degrees C instead of 600 degrees C. The best GaInAsP solar cell (Eg ~ 1.65 eV) in this study achieved JSC of 21.1 mA/cm 2 , VOC of 1.18 V, FF of 83.8%, and an efficiency of 20.8 +/- 1% under AM1.5D spectrum (21.5 +/- 1% under AM1.5G spectrum). Finally, these results highlight the potential of Al-free GaInAsP solar cells for integration in the next generation of III-V multijunction solar cells.

14 SOLAR ENERGY↗

Analysis of the Solar Energy Collection for In-Plane Rotation Two Axes Micro-Tracking Systems

Concentrator photovoltaic technologies (CPV) have long been regarded as the obvious way to increase the solar power collection efficiency but the use of bulky two axes tracking systems has been proven to be a fatal handicap for both economic and technical reasons. On the other hand, the continuous development of multijunction high efficiency solar cells encourages the research of novel CPV architectures that can leverage the new cells potential. Here we present a study on the solar energy collection of an ideal hybrid two axes micro-tracking system suitable for rooftop installations. In this study, we analyze in detail the optimal installation angle in relation to the latitude and the partial shading effect on modules of the same solar panel. The study is focused on optimizing the average collection efficiency over the astronomical year period as opposed to maximize the collection on any given day of the year. Additionally, we conducted a techno-economic analysis of the hybrid In-Plane Micro Tracker, using “Bottom-Up” methodology for determining the cost of the micro-tracking concept where the materials, assembly, utilities, maintenance costs are included for each step of the manufacturing process.

14 SOLAR ENERGY↗

Upconversion Er-doped TiO2 nanorod arrays for perovskite solar cells and the performance improvement

Highlights: • Er-doped TiO{sub 2} nanorod absorbs IR and converts into visible light. • The introduction of Er could make a positive shift in flat-band potential. • Er-doped TiO{sub 2} solar cells show a 20% increment in the current density. - Abstract: Upconversion erbium-doped rutile TiO{sub 2} nanorod arrays were synthesized by a facile process and applied in perovskite solar cells (PSCs). The structure was characterized by X-ray powder diffraction (XRD). Energy dispersive spectrometer (EDS) and Tauc plot indicated that Er was successfully introduced and changed TiO{sub 2} band gap from 3.00 eV to 3.07 eV. The incorporation of Er shifts the flat band potential positively and enhances the electron density. The Er-doped TiO{sub 2} nanorods have a broad absorption in the infrared light and up-convert it into visible light, which provides a possibility for PSCs to use NIR light for higher performance. A higher photocurrent density (J{sub sc}) of 22.97 mA/cm{sup 2} and a power conversion efficiency (PCE) of 10.6% were obtained, showing 20% and 16.5% increment in J{sub sc} and PCE, respectively, when compared with the un-doped device. The performance improvement was ascribed to the upconversion performance, enhanced electron-injection efficiency and reduced charge recombination.

14 SOLAR ENERGY↗

Rational Design of Dithienopicenocarbazole-Based Dyes and a Prediction of Their Energy-Conversion Efficiency Characteristics for Dye-Sensitized Solar Cells

Here, a series of metal-free organic donor-acceptor (D-A) derivatives (ME01-ME06) of the known dye C281 were designed using first principles calculations in order to evaluate their potential for applications in dye-sensitized solar cells (DSSCs). Their physical and electronic properties were calculated using density functional theory (DFT) and time-dependent density functional theory (TD-DFT). These include molecular properties that are required to assess the feasibility of a dye to function in DSSCs: UV/vis absorption spectra, light-harvesting efficiency (LHE), and driving forces of electron injection (Δ G inj ). ME01, ME02, and ME04 are predicted to exhibit broad absorption optical spectra that cover the entire visible range, rendering these three dyes promising DSSC prospects. Device-relevant calculations on these three short-listed dyes and the parent dye C281 were then performed, whereupon the dye molecules were adsorbed onto anatase TiO 2 surfaces to form the DSSC working electrode. Associated DSSC device characteristics of this dye…TiO 2 interfacial structure were determined. These include the light-harvesting efficiency, the number of injected electrons, the electron-injection lifetime, and the quantum energy alignment of the adsorbed dye molecule to that of its device components. In turn, these calculated parameters enabled the derivation of the DSSC device performance parameters: short-circuit current density, J SC , incident photon-to-electron conversion efficiency, IPCE, and open-circuit voltage, V OC . Thus, we demonstrate a systematic ab initio approach to screen rationally designed D-A dyes with respect to their potential applicability in high-performance DSSC devices.

14 SOLAR ENERGY↗

On the Path to SunShot - Executive Summary

The halfway mark of the SunShot Initiative’s 2020 target date is a good time to take stock: How much progress has been made? What have we learned? What barriers and opportunities must still be addressed to ensure that solar technologies achieve cost parity in 2020 and realize their full potential in the decades beyond? To answer these questions, the Solar Energy Technology Office launched the On the Path to SunShot series in early 2015 in collaboration with the National Renewable Energy Laboratory (NREL) and with contributions from Lawrence Berkeley National Laboratory (LBNL), Sandia National Laboratories (SNL), and Argonne National Laboratory (ANL). The reports focus on the areas of technology development, systems integration, and market enablers.

14 SOLAR ENERGY↗

A Survey of Federal and State-Level Solar System Decommissioning Policies in the United States

In the United States, cumulative installed utility-scale solar photovoltaic (PV) capacity reached more than 60 gigawatts (GW)dc at the end of 2020 (Davis et al. 2021b). Federal and state renewable energy and net-zero emissions policies will continue to drive solar development in the United States with installed utility-scale PV projected to quadruple (240 GWdc) by 2030 (Davis et al. 2021a; Heeter 2014). Although more than 75% of all U.S. installed utility-scale PV came online in the last 5 years, federal, state, and local governments are planning for system decommissioning (Davis et al. 2021b). Our research found that as of April 2021, one federal agency, the Bureau of Land Management (BLM), and 15 U.S. states have solar decommissioning policies in place. North Carolina is also in the process of drafting solar decommissioning regulations, and at least 4 states (Maine, Pennsylvania, West Virginia, Texas) proposed solar decommissioning bills in the 2021 legislative session. This report provides a survey and brief overview of both federal and U.S. statewide solar decommissioning policies, and a discussion of some of the potential impacts different policy designs may have on utility-scale solar development, including impacts that might influence construction timelines and over project costs.

14 SOLAR ENERGY↗