SEARCH · Search NASA

Results for “Two Phase Flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Physical analysis and second-order modelling of an unsteady turbulent flow - The oscillating boundary layer on a flat plate

The turbulent boundary layer under a freestream whose velocity varies sinusoidally in time around a zero mean is computed using two second order turbulence closure models. The time or phase dependent behavior of the Reynolds stresses are analyzed and results are compared to those of a previous SPALART-BALDWIN direct simulation. Comparisons show that the second order modeling is quite satisfactory for almost all phase angles, except in the relaminarization period where the computations lead to a relatively high wall shear stress.

Ha Minh, H.↗

NASA NTRS1986

Dynamic evolution of coronal magnetic fields

The response of coronal magnetic fields to photospheric motion is investigated using a time-dependent, two-dimensional MHD simulation. Starting with an initially uniform field, a circular section of the loop base is slowly rotated to represent the photospheric motion. The field lines at the base move with this flow in a manner consistent with the generated electric fields. The subsequent evolution of the field and flow can be characterized as passing through several distinct configurations. In the earliest phase the kinetic energy is negligible, and the current and field are parallel throughout most of the cylinder. This is followed by a period in which the field rotation increases, the axial field at and near the axis increases, and the acial field decreases in two cylindrical regions away from the axis. When the field in an appreciable portion of the cylinder has undergone one complete rotation, a rapid change in field configuration occurs with a large portion of the field making several rotations at large radii and a corresponding large reduction in the axial field.

Steinolfson, Richard S.↗

DOE OSTI2018

Multiphase Large Eddy Simulation of a Pulsed Sieve-Plate Extraction Column - 18125

Presented here is research resulting from a framework of single-phase and multiphase modelling trials. These are intended to accurately simulate the internal flow phenomena arising in pulsed sieve-plate extraction columns representative of those found in industry. Three-dimensional unsteady flow calculations using large eddy simulation coupled with dynamic sub-grid scale modelling have been used to capture the transient effects of sinusoidal flow conditions using the open source CFD code OpenFOAM{sup R}. Multiphase interface interactions are modelled using the volume of fluid method with appropriate heavy and light phase fluidic properties capturing surface tension, density and viscous effects. The system studied consists of a 150 mm diameter column with two perforated plates with a fractional free area of 25 %, operational under 1 Hz pulsing frequency at a 50 mm amplitude and plate spacing of 300 mm. The materials simulated include water (single-phase) and 3 M nitric acid and dodecane / tributyl phosphate mixture at 30 vol% (multiphase). Results are compared with appropriate correlations from literature. The dispersive mixing efficiency of the system was also evaluated via a mixing index value which allows quantification of the ratio of rotational and irrotational flow components. This study has found that the predictive methods employed are effective at capturing the different scales of turbulence present within pulsed sieve-plate extraction columns, and its influence on their operation. As such, the work highlights the ability of large eddy simulation-based modelling to predict the complex flows in such column geometries. Furthermore, the techniques employed provide valuable insight into the hydrodynamic flow characteristics and mixing mechanisms arising within pulsed sieve-plate extraction columns. (authors)

42 ENGINEERING↗

NASA NTRS1986

Response of hot element wall shear stress gages in laminar oscillating flows

An experimental investigation of the time-dependent response of hot element wall shear stress gages in unsteady periodic air flows is reported. The study has focused on wall shear stress in laminar oscillating flows produced on a flat plate by a free stream velocity composed of a mean component and a superposed sinusoidal variation. Two types of hot element gages, platinum film and flush wire, were tested for values of reduced frequency ranging from 0.14 to 2.36. Values of the phase angle of the wall shear stress variation relative to the free stream velocity, as indicated by the hot element gages, are compared with numerical prediction. The comparisons show that the gages indicate a wall shear stress variation that lags the true variation, and that the gages will also not indicate the correct wall shear stress variation in periodic turbulent flows.

Cook, W. J.↗

NASA NTRS1976

A numerical study of the temporal eigenvalue spectrum of the Blasius boundary layer

A numerical study is made of the temporal eigenvalue spectrum of the Orr-Sommerfeld equation for the Blasius boundary layer. Unlike channel flows, there is no mathematical proof that this flow has an infinite spectrum of discrete eigenvalues. The Orr-Sommerfeld equation is integrated numerically, and the eigenvalues located by tracing out the contour lines in the complex wave velocity plane on which the real and imaginary parts of the secular determinant are zero. The spectrum of plane Poiseuille flow is used as a guide to study the spectrum of an artificial two-wall flow which consists of two Blasius boundary layers. As the upper boundary of this flow moves to infinity, it is found that the portion of the spectrum with an infinite number of eigenvalues moves towards phase velocity equal to unity and the spacing between eigenvalues goes to zero. The original few eigenvalues found are the only discrete eigenvalues that exist for Blasius flow.

Mack, L. M.↗

NASA NTRS1979

The analysis and design of transonic two-element airfoil systems

The multiphase effort in the development of tools for the analysis and design of two-element airfoil systems, that is, airfoils with a slat or a flap at transonic speeds is described. The first phase involved the development of a method to compute the inviscid flow over such configurations. In the second phase the inviscid code was coupled to a boundary layer calculation program in order to compute the loss in performance due to viscous effects. An inverse code that constructs the airfoil system corresponding to a desired pressure distribution is described.

Volpe, G.↗

NASA NTRS1980

Variability of plasma sheet dynamics

IMP 7 observations of plasma sheet structure and dynamics made during a 24-h period in which the satellite traversed the tail plasma sheet at a radial distance of 35 earth radii and remained within 2 earth radii of the expected position at the neutral sheet and in which at least five substorms occured on the ground are presented. High-time-resolution measurements of the magnetic field, plasma flow and greater than 50-keV protons obtained by the satellite and ground-based magnetic measurements are discussed for a 4-hr interval in which two small substorms occurred, a 6-hr geomagnetically quiet interval in which moderate variable plasma flows were observed, a very rapid, smooth neutral sheet crossing and earthward plasma flow during the expansion phase of a small substorm, a moderate-size substorm in which a prolonged interval of field-aligned tailward flow commenced at onset, a strong tailward and dawnward flow burst in an interval between substorms and a large substorm in which strong tailward flow was observed. Observations indicate the significant distortion of the tail field, possibly by plasma flow stresses, a neutral sheet structure occasionally resembling the hydromagnetic rotational discontinuity and a high level of magnetic turbulence during an earthward plasma flow which may contribute towards plasma sheet dissipation.

Coroniti, F. V.↗

NASA NTRS1984

Phase averaged acoustic measurements for a Mach number 0.6 jet

Acoustic phase (ensemble) averaged measurements were performed in a cold, axisymmetric, Mach number 0.6 jet of air. These measurements show that the noise directly radiated by the coherent structure in the jet flow field was responsible for the directivity of the acoustic field. Comparison of phase averaged acoustic spectra with phase averaged radial velocity fluctuations within the jet illustrate the direct link between the two and show that different regions of the jet are responsible for producing the noise measured at various locations in the acoustic field.

Morrison, G. L.↗

NASA NTRS1986

SSME thrust chamber modeling with Navier Stokes equations

The capability of predicting two-dimensional, compressible and reacting flow in the combustion chamber and nozzle of the Space Shuttle Main Engine (SSME) is demonstrated. A nonorthogonal body fitted coordinate system has been used to represent the combustor and nozzle geometry. The Navier-Stokes equations are solved for the entire thrust chamber with the k-epsilon turbulence model accounting for compressibility and large pressure gradients effects. Results of the computational test cases reveal all expected features of the transonic nozzle flows including location of sonic line, internal shock and boundary layer build-up. Calculated performance parameters such as thrust, flow rate, and specific impulse are also in reasonble agreement with available data. The results show promising potential of solving full Navier-Stokes equations with heat transfer and two-phase combustion in truly comprehensive modeling of rocket engines.

Przekwas, A. J.↗

NASA NTRS1988

Nonequilibrium thermal radiation for an aeroassist flight experiment vehicle

The direct-simulation Monte Carlo method incorporating a dissociating and ionizing gas model for air with thermal radiation is used to characterize the hypersonic flow about an axisymmetric representation of an aeroassist flight experiment (AFE) vehicle, whose freestream conditions correspond to selected points along the entry, aerobraking, and exit phases of the trajectory. Calculations for two trajectory conditions indicate that the radiative heating of the AFE forebody is lower than the convective heating, but becomes significant as the maximum convective heating rate condition is approached.

Moss, James N.↗

NASA NTRS1988

Flight and ground packet telemetry systems activities at NASA's Goddard Space Flight Center

NASA's Goddard Space Flight Center (GSFC) has the responsibility for the telemetry ground data processing for two current spacecraft which use packet telemetry. These spacecraft are the Hubble Space Telescope (HST) and the Gamma Ray Observatory (GRO). GSFC has designed and built two ground systems to meet this responsibility. The first is the HST DATA Capture Facility (DCF), which has now completed its integration and test phase and is supporting spacecraft and data flow tests. The second is the Packet Processor System (Pacor). This system became operational in July 1987. These systems are known generally as Level Zero Processors. Level Zero Processors ingest telemetry composite bit streams, output selected user specific data in real time, and in a batch mode perform all necessary processing to produce individual user data files which are, within the limits of the quality of the received data, contiguous, complete, ordered and nonredundant.

Carper, Richard D.↗

NASA NTRS1992

Measuring electrically charged particle fluxes in space using a fiber optic loop sensor

The purpose of this program was to demonstrate the potential of a fiber optic loop sensor for the measurement of electrically charged particle fluxes in space. The key elements of the sensor are a multiple turn loop of low birefringence, single mode fiber, with a laser diode light source, and a low noise optical receiver. The optical receiver is designed to be shot noise limited, with this being the limiting sensitivity factor for the sensor. The sensing element is the fiber optic loop. Under a magnetic field from an electric current flowing along the axis of the loop, there is a non-vanishing line integral along the fiber optic loop. This causes a net birefringence producing two states of polarization whose phase difference is correlated to magnetic field strength and thus, current in the optical receiver electronic processing. The objectives in this program were to develop a prototype laser diode powered fiber optic sensor. The performance specification of a minimum detectable current density of 1 (mu)amp/sq m-(radical)Hz, should be at the shot noise limit of the detection electronics. OPTRA has successfully built and tested a 3.2 m diameter loop with 137 turns of low birefringence optical fiber and achieved a minimum detectable current density of 5.4 x 10(exp-5) amps/(radical)Hz. If laboratory space considerations were not an issue, with the length of optical fiber available to us, we would have achieved a minimum detectable current density of 4 x 10(exp -7) amps/(radical)Hz.

Source record↗

NASA NTRS2004

Operation of Packed-Bed Reactors Studied in Microgravity

The operation of a packed bed reactor (PBR) involves gas and liquid flowing simultaneously through a fixed-bed of solid particles. Depending on the application, the particles can be various shapes and sizes but are generally designed to force the two fluid phases through a tortuous route of narrow channels connecting the interstitial space. The PBR is the most common type of reactor in industry because it provides for intimate contact and high rates of transport between the phases needed to sustain chemical or biological reactions. The packing may also serve as either a catalyst or as a support for growing biological material. Furthermore, this type of reactor is relatively compact and requires minimal power to operate. This makes it an excellent candidate for unit operations in support of long-duration human space activities.

Motil, Brian J.↗

NASA NTRS2007

A Step Towards CO2-Neutral Aviation

An approximation method for evaluation of the caloric equations used in combustion chemistry simulations is described. The method is applied to generate the equations of specific heat, static enthalpy, and Gibb's free energy for fuel mixtures of interest to gas turbine engine manufacturers. Liquid-phase fuel properties are also derived. The fuels include JP-8, synthetic fuel, and two fuel blends consisting of a mixture of JP-8 and synthetic fuel. The complete set of fuel property equations for both phases are implemented into a computational fluid dynamics (CFD) flow solver database, and multi-phase, reacting flow simulations of a well-tested liquid-fueled combustor are performed. The simulations are a first step in understanding combustion system performance and operational issues when using alternate fuels, at practical engine operating conditions.

Brankovic, Andreja↗

NASA NTRSDate not supplied

An Overview of the Proprotor Performance Test in the 14- by 22-Foot Subsonic Tunnel

This work experimentally investigates the aerodynamic behavior of proprotors across a wide range of angles of attack. These flight conditions are intended to be representative of Urban Air Mobility (UAM) vehicle platforms that utilize articulating propulsors to transition from a vertical takeoff and landing (VTOL) phase typical of a conventional rotorcraft, to an axial mode of forward flight typical of a fixed-wing aircraft. These data are used to identify the potential limits of lower fidelity aerodynamic modeling tools, as well as to inform future acoustic phases of testing. Tests were conducted on two proprotor designs in the NASA Langley 14- by 22-Foot Subsonic Tunnel using an articulating propeller test stand. Hover results identified unique flow physics on one of the proprotors, including severe outboard flow separation and perpendicular blade vortex interactions on the outboard portions of the blades. Transition and forward flight conditions yielded very informative trends in terms of both on- and off-axis forces and moments against which low-fidelity prediction models were compared.

aerodynamics↗

NASA NTRSDate not supplied

An Overview of the Proprotor Performance Test in the 14- by 22-Foot Subsonic Tunnel

Nikolas Zawodny↗

DOE OSTI2021

Experiments and CFD simulation of mass transfer and hydrodynamics in a cylindrical bubble column

Flow visualization, Particle Image Velocimetry (PIV) and dissolved oxygen charging experiments are carried out in a small-scale cylindrical air-water bubble column at different superficial gas velocities. Void fraction profile, total gas holdup, liquid phase velocity field and volumetric mass transfer coefficient are obtained. Details of each experiment are given, with a new procedure for obtaining a 2D void fraction profile from flow visualization by image processing and time averaging which could provide useful information for CFD model validation. The experimental results are analyzed and compared with simulations where good agreement is found for both local and global flow patterns. The averaged governing equations and constitutive relations used in the simulation are discussed briefly, with emphasis on the proper comparison between simulations and experiments based on the derivation of the two-fluid model. Finally, by conducting three sets of experiments related to phase distribution, velocity field and mass transfer in the same apparatus, a validated CFD model for multiphase mass transfer is established and can be used in the future design of a multi-phase reactor.

42 ENGINEERING↗

NASA NTRS1992

Turbulence modelling for unsteady separated flows

The exact transport equations for turbulent (Reynolds) stresses have left-hand sides representing the 'substantial derivatives' of the Reynolds stresses, i.e., the rates of change of stress with respect to time, as seen by an observer following the mean motion of the fluid. Here the 'mean' is a statistical average for the turbulent motion, distinguished from the ordered unsteadiness on which it is superimposed: for a turbomachine blade or a cyclically-pitching airfoil, the mean is a phase average. Written in coordinates fixed with respect to a solid surface, the substantial derivative appears partly as an Eulerian time derivative at given spatial coordinate position and partly as a spatial derivative. Separation presents two specific problems to a turbulence model: (1) prediction of the flow near separation depends critically on the 'near-wall' part of the turbulence model, and (2) downstream of separation, a boundary layer changes gradually to a mixing layer.

Bradshaw, Peter↗