Search NASA⌕ Search

SEARCH · Search NASA

Results for “X ray diffraction analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Effects of Co doping on the structure and physicochemical properties of hausmannite (Mn 3 O 4 ) and its transformation during aging

Hausmannite is a common low-valence manganese oxide mineral with a distorted spinel structure in surficial sediments. Although natural Mn oxides often contain various transition metal (TM) impurities, few studies have addressed the substitution mechanisms of TMs, such as cobalt (Co), with hausmannite and induced changes in the mineral physicochemical properties. In this study, Co-doped hausmannites with final Co/Mn molar ratios of 0.05 and 0.11 were synthesized and characterized by wet chemical analysis, powder X-ray diffraction (XRD), Fourier transformed infrared spectra (FTIR), high resolution transmission electron microscope (HRTEM), X-ray photoelectron spectroscopy (XPS) and X-ray absorption fine structure spectroscopy (XAFS). Co-doped samples have larger crystallite sizes and smaller specific surface areas than those of the hausmannite without Co. The Co cations exist in a mixed-valence of +3 and + 2. Powder XRD and acid dissolution experiments indicate that Co incorporates into the mineral structures, and increases the mineral structural stability. Co K-edge extended X-ray adsorption fine structure (EXAFS) analysis demonstrates that Co likely substitutes for lattice Mn(III). After aging at room temperature for three years, 14.1 ± 1.9% of pure hausmannite is transformed to manganite while only 2.6 ± 0.7% of manganite appears in the aged Co-doped sample with an initial Co/Mn molar ratio of 0.10. Finally, these results provide new insights into the incorporation mechanisms of TMs into low valence Mn oxides, and the stability of these minerals in natural environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physicochemical evolution of uranium nitride kernel microstructure with varying carbon distribution for advanced TRISO fuel forms

Uranium nitride (UN) has emerged as a fuel candidate for advanced nuclear reactor concepts due to its superior uranium density, thermal conductivity, and high melting temperature. However, the fabrication route for converting UO 2 to UN is complex and difficult to standardize. Although the chemistry of this conversion process is well-studied, more insight into the physicochemical dynamics of this conversion using advanced characterization techniques can help further our understanding of this material system. This work leveraged thermogravimetric analysis (TGA), X-ray diffraction (XRD), and nondestructive 3D X-ray computed tomography (XCT) to characterize dynamic microstructural changes in the UO 2 → UCO → UN fabrication pathway for two kernels with a varying carbon distribution in the starting composition. TGA and XRD were used to quantify changes in the mass, density, and chemical composition of the two kernels, while three-dimensional image processing and segmentation of XCT data were used to quantify the volume, surface area, and spatial distribution of features within each kernel for multiple steps along the fabrication pathway. The analysis indicates distinct differences between the two kernels that are correlated to downstream conversion efficiency. In conclusion, this work is among the first to perform 3D quantification of physicochemical evolution during UN conversion, providing quantitative correlation between processing, properties, and expected fuel performance.

Nuclear fuel↗

Er{sup 3+}-doped strontium lithium bismuth borate glasses for broadband 1.5 {mu}m emission - optical properties

Strontium lithium bismuth borate glasses (SLBiB) doped with various concentrations of Er{sup 3+} were prepared using conventional melt quench technique and investigated their optical properties. The amorphous nature of the prepared glass samples was confirmed by X-ray diffraction and SEM analysis. Optical properties were studied by measuring the optical absorption and near infrared luminescence spectra at room temperature. Judd-Ofelt (J-O) theory has been applied for the f.f transitions of Er{sup 3+} ions to evaluate J-O intensity parameters, {Omega}{lambda} ({lambda} = 2, 4 and 6). Using the J-O intensity parameters, radiative properties such as transition probabilities (A{sub R}), branching ratios ({beta}) and radiative lifetimes ({tau}) are estimated for certain transitions. From the emission spectra, peak emission-cross sections ({sigma}{sub p}) and products of stimulated emission cross-section and full width at half maximum ({sigma}{sub p} Multiplication-Sign FWHM) were calculated for the observed emission transition, {sup 4}I{sub 13/2}{yields}{sup 4}I{sub 15/2}.

36 MATERIALS SCIENCE↗

Effect of the Fe/Ba Ratio and Sintering Temperature on Microstructure and Magnetic Properties of Barium Ferrites Prepared by Hydrothermal Method

Magnetoplumbite-type (M-type) hexagonal barium ferrite particles were synthesized by a hydrothermal method. The structure and magnetic properties of barium ferrites were investigated systematically, which indicated that the ratio of Fe/Ba (R{sub F/B}) and sintering temperature have an important effect on structure and performance. Phase composition, micro-morphology, and magnetic properties of the particles were investigated by X-ray powder diffraction (XRD) analysis, scanning electron microscopy (SEM), and vibrating sample magnetometry (VSM). When the ratio of Fe/Ba (R{sub F/B}) is even low or high, inferior images of XRD could be attained with certain impurities. When R{sub F/B} = 8, the single phase could be obtained without impurities. Micro-morphology of the particles exhibits the uniform plane hexagonal structures of nano-sized M-type ferrites when sintered at 800 °C. Saturation magnetization (M{sub s}) reaches the maximum value at R{sub F/B} = 7 (M{sub s} = 45.07 emu/g). The value of coercivity (H{sub c}) increases with the growth of R{sub F/B}, and H{sub c} is up to 6207 Oe when R{sub F/B} = 7. The effect of R{sub F/B} and temperature on magnetization (M{sub s}) and coercivity (H{sub c}) was studied in this paper.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two new metal-organic coordination polymers of lead with O-, N-donor ligands: Synthesis, characterization, luminescence and thermal behavior

The synthesis of two new lead(II) coordination polymers, [Pb{sub 2}(picOH){sub 4}]{center_dot}H{sub 2}O (1) and [Pb{sub 3}(Sip){sub 2}(H{sub 2}O){sub 2}]{center_dot}H{sub 2}O (2) has been reported, where HpicOH=3-hydroxypicolinic acid and NaH{sub 2}Sip=5-sulfoisophthalic acid monosodium salt. Both the complexes were structurally characterized by X-ray single crystal diffraction analysis. Complex 1, where the 3-hydroxypicolinate ligand is used for the first time in conjunction with Pb(II), revealed to be a 1D polymeric array. Complex 2 showed a 3D structure with 5-sulfoisophthalate ligand adopting two novel binding modes of high denticity ({eta}{sup 6}{mu}{sub 6} and {eta}{sup 7}{mu}{sub 7}). The photoluminescence and thermal properties of the two complexes have been studied. - Graphical abstract: 1D and 3D inorganic organic hybrid luminescent material of Pb(II) have been synthesized by using 3-hydroxypicolinate and 5-sulfoisophthalate anions. The 5-sulfoisophthalate ligand shows two novel binding modes with high denticity. Highlights: Black-Right-Pointing-Pointer 3-hydroxypicolinic acid is used for first time with Pb{sup 2+} in a MOF. Black-Right-Pointing-Pointer 5-sulfoisophthalic acid displays two novel binding modes of high denticity. Black-Right-Pointing-Pointer Complex 1 shows high thermal stability (up to 167 Degree-Sign C). Black-Right-Pointing-Pointer MLCT is present in both the complexes.

36 MATERIALS SCIENCE↗

Improved photoluminescence properties of a new green SrB{sub 2}O{sub 4}:Tb{sup 3+} phosphor by charge compensation

Highlights: ► New green-emitting SrB{sub 2}O{sub 4}:Tb{sup 3+} phosphor was synthesized by solid-state reaction. ► Li{sup +}, Na{sup +}, and K{sup +} can all increase luminescent intensity of SrB{sub 2}O{sub 4}:Tb{sup 3+}. ► Na{sup +} is the optimal charge compensator among Li{sup +}, Na{sup +} and K{sup +}. ► SrB{sub 2}O{sub 4}:Tb{sup 3+} is a promising green phosphor for fabricating WLED. -- Abstract: A new green-emitting SrB{sub 2}O{sub 4}:Tb{sup 3+} phosphor was synthesized by solid-state reaction. X-ray powder diffraction (XRD) analysis confirmed all the samples with orthorhombic formation of SrB{sub 2}O{sub 4}. The excitation spectra indicate the phosphor can be effectively excited by near ultraviolet (NUV) light, making it attractive as conversion phosphor for LED applications. The phosphor exhibits a bright green emission with the highest photoluminescence (PL) intensity at 544 nm excited by 378 nm light. The critical quenching concentration of Tb{sup 3+} in SrB{sub 2}O{sub 4}:Tb{sup 3+} is about 10 mol%. The effects of charge compensators (Li{sup +}, Na{sup +}, and K{sup +}) on photoluminescence of SrB{sub 2}O{sub 4}:Tb{sup 3+} were also studied. The results show that the emission intensity can be improved by all the three charge compensators and Na{sup +} is the optimal one for SrB{sub 2}O{sub 4}:Tb{sup 3+}. All properties show that the phosphor is a promising green phosphor pumped by NUV InGaN chip for fabricating white light-emitting diodes (WLEDs).

36 MATERIALS SCIENCE↗

Characterization of ultrafine-grained aluminum tubes processed by Tube Cyclic Extrusion–Compression (TCEC)

Tube Cyclic Extrusion–Compression as a novel severe plastic deformation technique for tubes was utilized for processing ultrafine grained 1050 aluminum alloy for the first time. In this method, aluminum tube is fully constrained and deformed between mandrel and chamber with a small neck zone. The material deformation during Tube Cyclic Extrusion–Compression processing analyzed and the grain refinement mechanism were described. The capability of Tube Cyclic Extrusion–Compression in grain refinement of the aluminum alloy was demonstrated by transmission electron microscopy observations and X-ray diffraction line profile analysis. The micrographs of the evolved microstructure show grain size of 850 nm and 550 nm after the first and second processing cycles of Tube Cyclic Extrusion–Compression, respectively. Mechanical properties of the initial and processed specimens were extracted from ring-hoop tensile tests. The documented results confirm grain refinement by showing remarkable increase in the yield and ultimate strengths. The main increase in strength and decrease in elongation take place after the first cycle. The microhardness assessments illustrate increase from the initial value of 29 Hv to 44 and 49 Hv respectively after the first and second cycles of Tube Cyclic Extrusion–Compression. There is a good homogeneity in peripheral microhardness and microhardness across the tube thickness. - Highlights: • Tubes of AA1050 for the first time were successfully SPD processed by TCEC. • The grain size was refined to 550 nm after two cycles of TCEC. • Notable increase in the strength and decrease in the elongation were documented. • The microhardness increased to 49 Hv from the initial value of 29 Hv. • Good homogeneity in the microhardness distribution was recorded.

36 MATERIALS SCIENCE↗

Fabrication and Characterization of a Conduction Cooled Thermal Neutron Filter

Installation of a conduction cooled thermal (low-energy) neutron filter in an existing domestic test reactor would provide the U.S. the capability to test new reactor fuels and materials for advanced fast (high-energy) reactor concepts. A composite consisting of Al3Hf-Al has been proposed for the neutron filter due to both the neutron filtering properties of hafnium and the conducting capabilities of aluminum. Knowledge of the thermal conductivity of the Al3Hf-Al composite is essential for the design of the filtering system. The present objectives are to identify a suitable fabrication technique and to measure the thermophysical properties of the Al3Hf intermetallic, which has not been done previous to this study. A centrifugal casting method was used to prepare samples of Al3Hf. X-ray diffraction and Rietveld analysis were conducted to determine the structural make-up of each of the samples. Thermophysical properties were measured as follows: specific heat by a differential scanning calorimeter (DSC), thermal diffusivity by a laser flash thermal diffusivity measuring system, thermal expansion by a dilatometer, and thermal conductivity was calculated based on the previous measurements. All measurements were acquired over a temperature range of 90°C - 375°C with some measurements outside these bounds. The average thermal conductivity of the intermetallic Al3Hf (~7 at.% Hf) was found to be ~ 41 W/m-K for the given temperature range. This information fills a knowledge gap in the thermophysical properties of the intermetallic Al3Hf with the specified percentage of hafnium. A model designed to predict composite properties was used to calculate a thermal conductivity of ~177 W/m-K for an Al3Hf-Al composite with 23 vol% Al3Hf. This calculation was based upon the average thermal conductivity of Al3Hf over the specified temperature range.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The effect of the distance between acidic site and basic site immobilized on mesoporous solid on the activity in catalyzing aldol condensation

Acid-base bifunctional heterogeneous catalysts containing carboxylic and amine groups, which were immobilized at defined distance from one another on the mesoporous solid were synthesized by immobilizing lysine onto carboxyl-SBA-15. The obtained materials were characterized by X-ray diffraction (XRD), N{sub 2} adsorption, Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron micrographs (SEM), transmission electron micrographs (TEM), elemental analysis, and back titration. Proximal-C-A-SBA-15 with a proximal acid-base distance was more active than maximum-C-A-SBA-15 with a maximum acid-base distance in aldol condensation reaction between acetone and various aldehydes. It appears that the distance between acidic site and basic site immobilized on mesoporous solid should be an essential factor for catalysis optimization. -- Graphical abstract: Proximal-C-A-SBA-15 with a proximal acid-base distance and maximum-C-A-SBA-15 with a maximum acid-base distance were synthesized by immobilizing lysine onto carboxyl-SBA-15. Display Omitted Research highlights: {yields} Proximal-C-A-SBA-15 with a proximal acid-base distance. {yields} Maximum-C-A-SBA-15 with a maximum acid-base distance. {yields} Compared to maximum-C-A-SBA-15, proximal-C-A-SBA-15 was more active toward aldol condensation reaction between acetone and various aldehydes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of microstress state of P91 steel using complementary mechanical Barkhausen, magnetoacoustic emission, and X-ray diffraction techniques

The paper deals with assessment of microstress state of martensite P91 steel using three complementary techniques: mechanical Barkhausen emission, magnetoacoustic emission (MAE), and X-ray diffraction (XRD) profile analysis. Magnetic coercivity Hc and microstructure were investigated with inductive magnetometry and magnetic force microscopy (MFM), respectively. Internal stress level of P91 steel was modified by heat treatment. Steel samples were austenitized, quenched, and then tempered at three temperatures (720 °C, 750 °C, and 780 °C) during increasing time (from 15 min up to 240 min). The microstrain level ε{sub i} was evaluated using Williamson–Hall method. It was revealed that during tempering microstrain systematically decreases from ε{sub i} = 2.5 × 10{sup −3} for as quenched state down to ε{sub i} = 0.3 × 10{sup −3} for well tempered samples. Both mechanical hardness (Vicker's HV) and magnetic hardness (coercivity) decrease almost linearly with decreasing microstrain while the MAE and MBE intensities strongly increase. Tempering leads to evident shift of the MeBN intensity maximum recorded for the first load towards lower applied strain values and to increase of MAE intensity. This indicates that the microstress state deduced by magnetic techniques is correlated with microstrains evaluated with XRD technique.

36 MATERIALS SCIENCE↗

Graphene Oxide/Polyaniline/Manganese Oxide Ternary Nanocomposites, Facile Synthesis, Characterization, and Application for Indigo Carmine Removal

Graphene oxide/polyaniline/manganese oxide ternary nanocomposites (GO/PANI/Mn{sub 2}O{sub 3}) have been successfully synthesized in one-pot method by in situ chemical oxidative polymerization of aniline in acidic medium using MnO{sub 2} as an oxidant. The obtaining nanocomposites have been characterized by transmission electron microscope, Fourier transform infrared, X-ray powder diffraction, and thermogravimetric analysis. The adsorption isotherms of indigo carmine (IC) onto; PANI, GO/PANI, PANI/MnO{sub 2}, and GO/PANI/Mn{sub 2}O{sub 3} have been evaluated under different adsorption conditions. The adsorption isotherm models of Langmuir, Freundlich, and Temkin were applied and the fit linear was obtained with Langmuir model. It was found that adsorption capacities followed the order: GO/PANI > GO/PANI/Mn{sub 2}O{sub 3} > PANI > PANI/MnO{sub 2} with the values of 88.73, 76.40, 60.45 and 22.52 mg/g. Moreover, the kinetics of the adsorption process was investigated and fit linear was obtained with pseudo-second-order model. The adsorption process was exothermic and spontaneous as revealed from the thermodynamic studies.

36 MATERIALS SCIENCE↗

Influence of magnesia-to-phosphate molar ratio on microstructures, mechanical properties and thermal conductivity of magnesium potassium phosphate cement paste with large water-to-solid ratio

This paper describes the influence of the magnesia-to-phosphate (M/P) molar ratios ranging from 4 to 12, on the properties and microstructures of magnesium potassium phosphate cement (MKPC) pastes with a large water-to-solid ratio (w/s) of 0.50. The setting behavior, compressive strength, tensile bonding strength and thermal conductivity of the MKPC pastes, were investigated. The results show that an increase in the M/P ratio can slow down the setting reaction, and clearly degrade the mechanical strengths, but clearly improve the thermal conductivity of MKPC pastes. Furthermore, micro-characterizations including X-ray diffraction, scanning electron microscopy and thermogravimetric analysis, on the MKPC pastes reveal that a lower M/P ratio can facilitate better crystallization of the resultant magnesium potassium phosphate hexahydrate (MKP) and a denser microstructure. Moreover, strong linear correlations are found between the mechanical strengths and the MKP-to-space ratio, and between thermal conductivity and the volume ratio of the unreacted magnesia to the MKP. - Highlights: • Increase of M/P molar ratio causes clear mechanical degradations on MKPC pastes. • Thermal conductivity of MKPC pastes is improved with increase of M/P molar ratio. • Lower M/P ratio leads to better MKP crystallization and denser microstructure. • Strengths of MKPC pastes are linearly correlated to the MKP-to-space ratios. • Thermal conductivity is affected by the volume ratio of unreacted magnesia to MKP.

36 MATERIALS SCIENCE↗

Single-Crystal Synthesis and Characterization of Copper-Intercalated ZrTe 5

Herein is presented the synthesis and characterization of copper-intercalated zirconium pentatelluride (ZrTe 5 ). ZrTe 5 :Cu 0.05 crystals are synthesized by the chemical vapor transport method in a vacuum. X-ray diffraction and elemental analysis techniques are utilized to validate the synthesis. The results indicate that the intercalation of the layered Zr/Te structure with copper atoms causes the contraction of the unit cell along all three crystalline directions, the shrinkage of the overall volume of the unit cell, and the distortion of the unit cell. A single crystal was isolated, mechanically exfoliated, and used for the measurements of intercalation strains in a Hall bar device. Electronic transport studies indicate that an anomalous resistance drop is observed at T = 19 K. Furthermore, R xx and R xy results, respectively, indicate a probable disorder-induced localization effect and electron-type carriers.

36 MATERIALS SCIENCE↗

Characterization of Hafnia Powder Prepared from an Oxychloride Sol Gel

Hafnium containing compounds are of great importance to the semiconductor industry as a replacement for Si(O,N) with a high- gate dielectric. Whilst Hf is already being incorporated into working devices1, much is still to be understood about it. Here we investigate the crystallisation processes and chemistry of bulk HfO2 powders which will aid in interpretation of reactions and crystallisation events occurring in thin films used as gate dielectrics. Amorphous HfO2 powder was prepared via a sol-gel route using hafnium oxychloride (HfOCl2 xH2O) as a precursor. The powders were subjected to various heat treatments and analysed using x-ray diffraction (XRD) and thermal analysis techniques. It was found that a large change in the crystallisation pathway occurred when the sample was heated in an inert environment compared with in air. Instead of the expected monoclinic phase (m-HfO2), tetragonal HfO2 (t-HfO2) also formed under these conditions and was observed up to temperatures of ~760 C. The t-HfO2 particles, which are less than 30nm in size, eventually transform into m-HfO2 on further heating. Possible mechanisms for the crystallisation of t-HfO2 are discussed. It is proposed that within this temperature range t-HfO2 is stabilised due to the presence of oxygen vacancies in the inert environment, forming by the reduction of HfIV to HfIII. As the crystal grows in size as the temperature increases there are too few oxygen vacancies left in the structure to continue stabilising the t-HfO2 phase and so transformation to m-HfO2 occurs.

36 MATERIALS SCIENCE↗

Host-sensitized phosphorescence of Mn{sup 4+}, Pr{sup 3+,4+} and Nd{sup 3+} in MgAl{sub 2}Si{sub 2}O{sub 8}

Highlights: Black-Right-Pointing-Pointer The new red phosphors were synthesized in the MgAl{sub 2}Si{sub 2}O{sub 8} system. Black-Right-Pointing-Pointer These systems were characterized with DTA/TG, XRD, SEM and PL. Black-Right-Pointing-Pointer The excitation and emission mechanisms were explained. -- Abstract: Mn{sup 4+} doped and Pr{sup 3+,4+}, Nd{sup 3+} co-doped MgAl{sub 2}Si{sub 2}O{sub 8}-based phosphors were first of all synthesized about 1300 Degree-Sign C. They were characterized by thermogravimetry (TG), differential thermal analysis (DTA), X-ray powder diffraction (XRD), photoluminescence (PL) and scanning electron microscopy (SEM). The luminescence mechanism of the phosphors, which showed broad red emission bands in the range of 610-715 nm and had a different maximum intensity when activated by UV illumination, was discussed. Such a red emission can be attributed to the intrinsic d-d transitions of Mn{sup 4+}.

36 MATERIALS SCIENCE↗

Syntheses, structures and photoelectric properties of a series of Cd(II)/Zn(II) coordination polymers and coordination supramolecules

Five Cd(II)/Zn(II) complexes [Cd(1,2-bdc)(pz){sub 2}(H{sub 2}O)]{sub n} (1), [Cd1Cd2(btec)(H{sub 2}O){sub 6}]{sub n} (2), [Cd(3,4-pdc) (H{sub 2}O)]{sub n} (3), [Zn(2,5-pdc)(H{sub 2}O){sub 4}]{center_dot}2H{sub 2}O (4) and {l_brace} [Zn(2,5-pdc)(H{sub 2}O){sub 2}]{center_dot}H{sub 2}O{r_brace} {sub n} (5) (H{sub 2}bdc=1,2-benzenedicarboxylic acid, pz=pyrazole, H{sub 4}btec=1,2,4,5-benzenetetracarboxylic acid, H{sub 2}pdc=pyridine-dicarboxylic acid) were hydrothermally synthesized and characterized by single-crystal X-ray diffraction, surface photovoltage spectroscopy, XRD, TG analysis, IR and UV-vis spectra and elemental analysis. Structural analyses show that complexes 1-3 are 1D, 2D and 3D Cd(II) coordination polymers, respectively. Complex 4 is a mononuclear Zn(II) complex. Complex 5 is a 3D Zn(II) coordination polymer. The surface photoelectric properties of complexes were investigated by SPS. The results indicate that all complexes exhibit photoelectric responses in the range of 300-600 nm, which reveals that they all possess certain photoelectric conversion properties. By the comparative analyses, it can be found that the species and coordination micro-environment of central metal ion, the species and property of ligands affect the intensity and scope of photoelectric response. - Graphical abstract: Five Cd(II)/Zn(II) complexes have been hydrothermally synthesized and characterized. The photoelectric properties were studied with SPS. The species and coordination micro-environment of central metal ion, the species and property of ligands all affect the photoelectric responses. Highlights: Black-Right-Pointing-Pointer Five Cd/Zn complexes have been synthesized and characterized. Black-Right-Pointing-Pointer The SPS results indicate they possess obvious photoelectric conversion property. Black-Right-Pointing-Pointer The species and coordination environment of central metal ion affect SPS. Black-Right-Pointing-Pointer The species and property of ligands affect SPS. Black-Right-Pointing-Pointer By the energy-band theory and the crystal filed theory, the SPS are analyzed and assigned.

36 MATERIALS SCIENCE↗

Mechanical behavior of carbonated MgO-based Engineered Cementitious Composite (ECC) after high temperatures exposure

Carbonated MgO-based Engineered Cementitious Composite (ECC) has ultrahigh tensile ductility and tight crack width control behavior. However, the expectation of improved fire-resistant has not been confirmed. This study explored the alterations to mechanical and microstructure characteristics of this material after exposure to temperatures up to 500 °C. Material mass loss, compressive strength, tensile strength, strain capacity, and matrix fracture toughness were measured. Scanning electron microscopy, mercury intrusion porosimetry, thermogravimetric analysis, and X-ray diffraction were used to probe the degradation of the cement matrix and fibers. The effect of elevated temperature on carbonated MgO-based ECC was further assessed via examination of the micromechanical behavior of the fiber-matrix. The objective of this research was to assess the performance of carbonated MgO-based ECC exposed to fire hazards. The tensile ductility of carbonated MgO-based ECC was found to be enhanced when exposed to ~100 °C as compared with those at room temperature ~20 °C. Further increase in exposure temperature, however, posed a negative impact on the composite compressive strength, ultimate tensile strength, and ability to control crack width. Here the results provide a useful database for further investigations into carbonated MgO-based ECC for fire safety enhancement.

36 MATERIALS SCIENCE↗