Search NASA⌕ Search

SEARCH · Search NASA

Results for “delta method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Measuring B{sub s} width difference at the {Upsilon}(5s) using quantum entanglement

About 90% of B{sub s}B{sub s} pairs produced at the {Upsilon}(5s) resonance are initially B{sub s}{sup *}B{sub s}{sup *} pairs which decay radiatively to B{sub s}B{sub s}. This implies that the B{sub s}B{sub s} pair will then be in an eigenstate of charge conjugation (i.e. C=-1) and therefore in an entangled state. This allows for a determination of {Delta}{Gamma}{sub s}/{Gamma}{sub s} and the CP phase using a number of possible correlations between the decays of the two B{sub s} mesons. In particular, we consider the time integrated correlation, the time ordering asymmetry, and the time ordering-charge asymmetry, which in addition to time ordering distinguishes B{sub s} from B{sub s}, for various combinations of final states. With the statistics of about O(10{sup 7}-10{sup 8}) {Upsilon}(5s) events available at B factories, we find that the time ordering asymmetry between suitably defined hadronic and flavor specific (tagging) decays offers a promising method for determining the width difference. The corresponding time ordering-charge asymmetry can also bound the mixing phase. Similar observables involving exclusive decays are also considered. At the super B factories with O(50) times greater luminosity time ordering and time ordering-charge asymmetries between inclusive and exclusive modes may also provide additional bounds on the phases in those decays.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Detection of the Third Transition of InAs/GaAsSb Quantum Dots

We have investigated InAs quantum dots (QDs) on GaAsSb barrier layers. Low temperature photoluminescence (PL) for InAs/GaAsSb with various {delta}-doping levels is performed to observe interband transitions. PL spectra of heavily doped QD samples show that the electrons injected from the {delta}-doping plane increase the intensity of the emission peak between the electron and hole first excited states, E1H1, not observed from undoped and lightly QD samples. Time resolved photoluminescence (TRPL) data as a function of {delta}-doping density reveal that the introduction of a {delta}-doping plane in the GaAsSb barrier decreases a carrier lifetime making recombination between ground states in QD area faster. As an evidence of carriers more injected from a {delta}-doping plane an Arrhenius fitting curve taken from temperature dependent PL indicates that the doped samples have the greater thermal activation energies than those of the lightly doped samples. Additionally, intersubband transitions of 20 multiple InAs QDs embedded in GaAsSb barriers are experimentally determined by low temperature (77K) Fourier Transformation-Infrared Spectroscopy (FT-IR) using a multiple internal reflection technique. It is noted that there is a broad peak around about 240meV corresponding to the energy separation between the electron ground state and the continuum state in the conduction band offset (CBO). The band structure based upon an eight band k.p method confirms the experimental results observed here. Furthermore, all related physical phenomena will be discussed as well.

14 SOLAR ENERGY↗

The Einstein@Home gamma-ray pulsar survey. I. Search methods, sensitivity, and discovery of new young gamma-ray pulsars

We report on the results of a recent blind search survey for gamma-ray pulsars in Fermi Large Area Telescope (LAT) data being carried out on the distributed volunteer computing system, Einstein@Home. The survey has searched for pulsations in 118 unidentified pulsar-like sources, requiring about 10,000 years of CPU core time. In total, this survey has resulted in the discovery of 17 new gamma-ray pulsars, of which 13 are newly reported in this work, and an accompanying paper. These pulsars are all young, isolated pulsars with characteristic ages between 12 kyr and 2 Myr, and spin-down powers between 10{sup 34} and 4 × 10{sup 36} erg s{sup −1}. Two of these are the slowest spinning gamma-ray pulsars yet known. One pulsar experienced a very large glitch Δf/f≈3.5×10{sup −6} during the Fermi mission. In this, the first of two associated papers, we describe the search scheme used in this survey, and estimate the sensitivity of our search to pulsations in unidentified Fermi-LAT sources. One such estimate results in an upper limit of 57% for the fraction of pulsed emission from the gamma-ray source associated with the Cas A supernova remnant, constraining the pulsed gamma-ray photon flux that can be produced by the neutron star at its center. We also present the results of precise timing analyses for each of the newly detected pulsars.

79 ASTRONOMY AND ASTROPHYSICS↗

On Differential Expressions with {delta}-Potential: Exceptional Case d 2l

The paper is devoted to the study of the formal differential expressions (-{Delta}){sup l}u+a{delta}u for arbitrary l(set-membership sign)N and the dimension of R{sup d} equal d = 2l. Approximations of the singular part by means of a family of rank-one operators are constructed and resolvent convergence of this family is investigated. It is demonstrated that the results are different from the case d{ne}2l.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

WAVELENGTH CALIBRATION OF THE VLT-UVES SPECTROGRAPH

We attempt to measure possible miscalibration of the wavelength scale of the VLT-UVES spectrograph. We take spectra of QSO HE0515-4414 through the UVES iodine cell which contains thousands of well-calibrated iodine lines and compare these lines to the wavelength scale from the standard thorium-argon pipeline calibration. Analyzing three exposures of this z = 1.71 QSO, we find two distinct types of calibration shifts needed to correct the Th/Ar wavelength scale. First, there is an overall average velocity shift of between 100 m s{sup -1} and 500 m s{sup -1} depending upon the exposure. Second, within a given exposure, we find intra-order velocity distortions of 100 m s{sup -1} up to more than 200 m s{sup -1}. These calibration errors are similar to, but smaller than, those found earlier in the Keck HIRES spectrometer. We discuss the possible origins of these two types of miscalibration. We also explore the implications of these calibration errors on the systematic error in measurements of {Delta}{alpha}/{alpha}, the change in the fine-structure constant derived from measurement of the relative redshifts of absorption lines in QSO absorption systems. The overall average, exposure-dependent shifts should be less relevant for fine-structure work, but the intra-order shifts have the potential to affect these results. Using either our measured calibration offsets or a Gaussian model with sigma of around 90 m s{sup -1}, Monte Carlo mock experiments find errors in {Delta}{alpha}/{alpha} of between 1 x 10{sup -6} N {sup -1/2}{sub sys} and 3 x 10{sup -6} N {sup -1/2}{sub sys}, where N{sub sys} is the number of systems used and the range is due to dependence on how many metallic absorption lines in each system are compared.

79 ASTRONOMY AND ASTROPHYSICS↗

Preconditioned implicit solvers for the Navier-Stokes equations on distributed-memory machines

The GMRES method is parallelized, and combined with local preconditioning to construct an implicit parallel solver to obtain steady-state solutions for the Navier-Stokes equations of fluid flow on distributed-memory machines. The new implicit parallel solver is designed to preserve the convergence rate of the equivalent 'serial' solver. A static domain-decomposition is used to partition the computational domain amongst the available processing nodes of the parallel machine. The SPMD (Single-Program Multiple-Data) programming model is combined with message-passing tools to develop the parallel code on a 32-node Intel Hypercube and a 512-node Intel Delta machine. The implicit parallel solver is validated for internal and external flow problems, and is found to compare identically with flow solutions obtained on a Cray Y-MP/8. A peak computational speed of 2300 MFlops/sec has been achieved on 512 nodes of the Intel Delta machine,k for a problem size of 1024 K equations (256 K grid points).

Ajmani, Kumud↗

Deep-Learning-Derived Evaluation Metrics Enable Effective Benchmarking of Computational Tools for Phosphopeptide Identification

Tandem mass spectrometry (MS/MS)-based phosphoproteomics is a powerful technology for global phosphorylation analysis. However, applying four computational pipelines to a typical mass spectrometry (MS)-based phosphoproteomic dataset from a human cancer study, we observed a large discrepancy among the reported phosphopeptide identification and phosphosite localization results, underscoring a critical need for benchmarking. While efforts have been made to compare performance of computational pipelines using data from synthetic phosphopeptides, evaluations involving real application data have been largely limited to comparing the numbers of phosphopeptide identifications due to the lack of appropriate evaluation metrics. We investigated three deep learning-derived features as potential evaluation metrics: phosphosite probability, Delta RT and spectral similarity. Predicted phosphosite probability is computed by MusiteDeep, which provides high accuracy as previously reported; Delta RT is defined as the absolute retention time (RT) difference between RTs observed and predicted by AutoRT; and spectral similarity is defined as the Pearson’s correlation coefficient between spectra observed and predicted by pDeep2. Using a synthetic peptide dataset, we found that both Delta RT and spectral similarity provided excellent discrimination between correct and incorrect peptide-spectrum matches (PSMs) both when incorrect PSMs involved wrong peptide sequences and even when incorrect PSMs were caused by only incorrect phosphosite localization. Based on these results, we used all the three deep learning-derived features as evaluation metrics to compare different computational pipelines on diverse set of phosphoproteomic datasets and showed their utility in benchmarking performance of the pipelines. The benchmark metrics demonstrated in this study will enable users to select computational pipelines and parameters for routine analysis of phosphoproteomics data and will offer guidance for developers to improve computational methods.

59 BASIC BIOLOGICAL SCIENCES↗

NASA Advanced Concepts Office, Earth-To-Orbit Team Design Process and Tools

The Earth-to-Orbit Team (ETO) of the Advanced Concepts Office (ACO) at NASA Marshall Space Flight Center (MSFC) is considered the pre-eminent go-to group for pre-phase A and phase A concept definition. Over the past several years the ETO team has evaluated thousands of launch vehicle concept variations for a significant number of studies including agency-wide efforts such as the Exploration Systems Architecture Study (ESAS), Constellation, Heavy Lift Launch Vehicle (HLLV), Augustine Report, Heavy Lift Propulsion Technology (HLPT), Human Exploration Framework Team (HEFT), and Space Launch System (SLS). The ACO ETO Team is called upon to address many needs in NASA s design community; some of these are defining extremely large trade-spaces, evaluating advanced technology concepts which have not been addressed by a large majority of the aerospace community, and the rapid turn-around of highly time critical actions. It is the time critical actions, those often limited by schedule or little advanced warning, that have forced the five member ETO team to develop a design process robust enough to handle their current output level in order to meet their customer s needs. Based on the number of vehicle concepts evaluated over the past year this output level averages to four completed vehicle concepts per day. Each of these completed vehicle concepts includes a full mass breakdown of the vehicle to a tertiary level of subsystem components and a vehicle trajectory analysis to determine optimized payload delivery to specified orbital parameters, flight environments, and delta v capability. A structural analysis of the vehicle to determine flight loads based on the trajectory output, material properties, and geometry of the concept is also performed. Due to working in this fast-paced and sometimes rapidly changing environment, the ETO Team has developed a finely tuned process to maximize their delivery capabilities. The objective of this paper is to describe the interfaces between the three disciplines used in the design process: weights and sizing, trajectory, and structural analysis. The tools used to perform such analysis are INtegrated Rocket Sizing (INTROS), Program to Optimize Simulated Trajectories (POST), and Launch Vehicle Analysis (LVA) respectively. The methods each discipline uses to streamline their particular part of the design process will also be discussed.

Waters, Eric D.↗

NASA Advanced Concepts Office, Earth-To-Orbit Team Design Process and Tools

The Earth-to-Orbit Team (ETO) of the Advanced Concepts Office (ACO) at NASA Marshall Space Flight Center (MSFC) is considered the pre-eminent "go-to" group for pre-phase A and phase A concept definition. Over the past several years the ETO team has evaluated thousands of launch vehicle concept variations for a significant number of studies including agency-wide efforts such as the Exploration Systems Architecture Study (ESAS), Constellation, Heavy Lift Launch Vehicle (HLLV), Augustine Report, Heavy Lift Propulsion Technology (HLPT), Human Exploration Framework Team (HEFT), and Space Launch System (SLS). The ACO ETO Team is called upon to address many needs in NASA's design community; some of these are defining extremely large trade-spaces, evaluating advanced technology concepts which have not been addressed by a large majority of the aerospace community, and the rapid turn-around of highly time critical actions. It is the time critical actions, those often limited by schedule or little advanced warning, that have forced the five member ETO team to develop a design process robust enough to handle their current output level in order to meet their customer's needs. Based on the number of vehicle concepts evaluated over the past year this output level averages to four completed vehicle concepts per day. Each of these completed vehicle concepts includes a full mass breakdown of the vehicle to a tertiary level of subsystem components and a vehicle trajectory analysis to determine optimized payload delivery to specified orbital parameters, flight environments, and delta v capability. A structural analysis of the vehicle to determine flight loads based on the trajectory output, material properties, and geometry of the concept is also performed. Due to working in this fast-paced and sometimes rapidly changing environment, the ETO Team has developed a finely tuned process to maximize their delivery capabilities. The objective of this paper is to describe the interfaces between the three disciplines used in the design process: weights and sizing, trajectory, and structural analysis. The tools used to perform such analysis are INtegrated Rocket Sizing (INTROS), Program to Optimize Simulated Trajectories (POST), and Launch Vehicle Analysis (LVA) respectively. The methods each discipline uses to streamline their particular part of the design process will also be discussed.

Waters, Eric D.↗

Quantitative scanning near-field microwave microscopy for thin film dielectric constant measurement

We combine a scanning near-field microwave microscope with an atomic force microscope for use in localized thin film dielectric constant measurement, and demonstrate the capabilities of our system through simultaneous surface topography and microwave reflection measurements on a variety of thin films grown on low resistivity silicon substrates. Reflection measurements clearly discriminate the interface between {approx}38 nm silicon nitride and dioxide thin films at 1.788 GHz. Finite element simulation was used to extract the dielectric constants showing the dielectric sensitivity to be {delta}{epsilon}{sub r}=0.1 at {epsilon}{sub r}=6.2, for the case of silicon nitride. These results illustrate the capability of our instrument for quantitative dielectric constant measurement at microwave frequencies.

36 MATERIALS SCIENCE↗

Variational perturbation theory and nonperturbative calculations in QCD

A nonperturbative approach based on the variational perturbation theory in quantum chromodynamics is developed. The variational series is different from the conventional perturbative expansion and can be used to go beyond the weak-coupling regime. The approach suggested takes into account the summation of threshold singularities and the involvement of nonperturbative light quark masses. Phenomenological applications of this approach to describe physical quantities connected with the hadronic {tau}-decay data: the R{sub {tau}} ratio, the light-quark Adler function, and the smeared R{sub {Delta}} function are presented. The description of examined quantities includes an infrared region and, therefore, they cannot be directly calculated within the standard perturbation theory. It is shown that in spite of this fact the approach suggested gives a rather good result for these quantities down to the lowest energy scale.

74 ATOMIC AND MOLECULAR PHYSICS↗

Altered Cross-Linking of HSP27 by Zerumbone as a Novel Strategy for Overcoming HSP27-Mediated Radioresistance

Purpose: HSP27 or HSP25 negatively regulates apoptosis pathways after radiation or chemotherapeutic agents. Abrogation of HSP27 function may be a candidate target for overcoming radio- and chemoresistance. Methods and Materials: Zerumbone (ZER), a cytotoxic component isolated from Zingiber zerumbet smith. Clonogenic survival assay and flow cytometry after Annexin V staining were performed to determine in vitro sensitization effects of ZER with ionizing radiation. A nude mouse xenografting system was also applied to detect in vivo radiosensitizing effects of ZER. Results: ZER produced cross-linking of HSP27, which was dependent on inhibition of the monomeric form of HSP27. ZER was directly inserted between the disulfide bond in the HSP27 dimer and modified normal HSP27 dimerization. Pretreatment with ZER before radiation inhibited the binding affinity between HSP27 and apoptotic molecules, such as cytochrome c and PKC{delta}, and induced sensitization in vitro and in an in vivo xenografted nude mouse system. Structural analogs lacking only the carbonyl group in ZER, such as {alpha}-humulene (HUM) and 8-hydroxy-humulen (8-OH-HUM), did not affect normal cross-linking of HSP27 and did not induce radiosensitization. Conclusions: We suggest that altered cross-linking of HSP27 by ZER is a good strategy for abolishing HSP27-mediated resistance.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

The crystal structure of Hf{sub 1.5+{delta}}Nb{sub 1.5-{delta}}As and structure-composition relations in the section Hf{sub 3}As-Nb{sub 3}As

The title compound Hf{sub 1.5+{delta}}Nb{sub 1.5-{delta}}As was characterized by means of single crystal X-ray diffraction. It represents a new structure type of intermetallic compounds (space group Pnma; lattice parameters a=7.142(2) A, b=3.583(2) A, c=11.640(2) A) and shows a small homogeneity range corresponding to (0.1<delta<0.25) at 1400 deg. C. The crystal structure may be visualized by a combination of As-centred trigonal prisms of the metal atoms and bcc-like fragments formed by metal atoms. Structural relations with various binary arsenides are discussed. The structure of Hf{sub 1.5+{delta}}Nb{sub 1.5-{delta}}As shows significant preferred site occupation of Hf and Nb at the three independent metal positions (differential fractional site occupancy). Structure-composition relations in the section Hf{sub 3}As-Nb{sub 3}As which also contains the new phase Hf{sub 2+{delta}}Nb{sub 1-{delta}}As with Ti{sub 3}P-type structure (space group P4{sub 2}/n) are discussed. Ground state energies of various ordered compounds with Hf{sub 1.5+{delta}}Nb{sub 1.5-{delta}}As-, Ti{sub 3}P- and Ta{sub 3}As-type structures were calculated from ab initio density functional theory. These energies were used for thermodynamic calculations employing the compound energy formalism (CEF) with the aim to model the experimentally observed site fraction data for both ternary compounds as well as Gibbs energies at the temperature of equilibration (1400 deg. C). - Graphical abstract: Hf{sub 1.5+{delta}}Nb{sub 1.5-{delta}}As with a new structure type (space group Pnma; lattice parameters a=7.142(2) A, b=3.583(2) A, c=11.640(2)A) was synthesized. Phase relations, energies and partial ordering in the section Hf{sub 3}As-Nb{sub 3}As were studied by first principle DFT calculations and thermodynamic modelling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On collisional energy transfer in recombination and dissociation reactions: A Wiener-Hopf problem and the effect of a near elastic peak

The effect of the large impact parameter near-elastic peak of collisional energy transfer for unimolecular dissociation/bimolecular recombination reactions is studied. To this end, the conventional single exponential model, a biexponential model that fits the literature classical trajectory data better, a model with a singularity at zero energy transfer, and the most realistic model, a model with a near-singularity, are fitted to the trajectory data in the literature. The typical effect of the energy transfer on the recombination rate constant is maximal at low pressures and this region is the one studied here. The distribution function for the limiting dissociation rate constant k{sub 0} at low pressures is shown to obey a Wiener-Hopf integral equation and is solved analytically for the first two models and perturbatively for the other two. For the single exponential model, this method yields the trial solution of Troe. The results are applied to the dissociation of O{sub 3} in the presence of argon, for which classical mechanical trajectory data are available. The k{sub 0}'s for various models are calculated and compared, the value for the near-singularity model being about ten times larger than that for the first two models. This trend reflects the contribution to the cross section from collisions with larger impact parameter. In the present study of the near-singularity model, it is found that k{sub 0} is not sensitive to reasonable values for the lower bound. Energy transfer values <{delta}E>'s are also calculated and compared and can be similarly understood. However, unlike the k{sub 0} values, they are sensitive to the lower bound, and so any comparison of a classical trajectory analysis for <{delta}E>'s with the kinetic experimental data needs particular care.

74 ATOMIC AND MOLECULAR PHYSICS↗

Binary black hole coalescence in the extreme-mass-ratio limit: Testing and improving the effective-one-body multipolar waveform

We discuss the properties of the effective-one-body (EOB) multipolar gravitational waveform emitted by nonspinning black-hole binaries of masses {mu} and M in the extreme-mass-ratio limit {mu}/M={nu}<<1. We focus on the transition from quasicircular inspiral to plunge, merger, and ringdown. We compare the EOB waveform to a Regge-Wheeler-Zerilli waveform computed using the hyperboloidal layer method and extracted at null infinity. Because the EOB waveform keeps track analytically of most phase differences in the early inspiral, we do not allow for any arbitrary time or phase shift between the waveforms. The dynamics of the particle, common to both wave-generation formalisms, is driven by a leading-order O({nu}) analytically resummed radiation reaction. The EOB and the Regge-Wheeler-Zerilli waveforms have an initial dephasing of about 5x10{sup -4} rad and maintain then a remarkably accurate phase coherence during the long inspiral ({approx}33 orbits), accumulating only about -2x10{sup -3} rad until the last stable orbit, i.e. {Delta}{phi}/{phi}{approx}-5.95x10{sup -6}. We obtain such accuracy without calibrating the analytically resummed EOB waveform to numerical data, which indicates the aptitude of the EOB waveform for studies concerning the Laser Interferometer Space Antenna. We then improve the behavior of the EOB waveform around merger by introducing and tuning next-to-quasicircular corrections in both the gravitational wave amplitude and phase. For each multipole we tune only four next-to-quasicircular parameters by requiring compatibility between EOB and Regge-Wheeler-Zerilli waveforms at the light ring. The resulting phase difference around the merger time is as small as {+-}0.015 rad, with a fractional amplitude agreement of 2.5%. This suggest that next-to-quasicircular corrections to the phase can be a useful ingredient in comparisons between EOB and numerical-relativity waveforms.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Risk-Informed Safety Analysis for Accident Tolerant Fuels

Accident Tolerant Fuels (ATF) are being tested by different nuclear vendors and research organization and their introduction in light water reactors fleet is planned for the second half of the 2020`s. In the framework of the US-DOE Light-Water Reactor Sustainability program, Risk-Informed Safety Analysis pathway (LWRS-RISA), research activities are being conducted at the Idaho National Laboratory (INL) for developing tools and methods that can help the industry in quantifying the ATF introduction benefits. In this paper we describe the developed risk-informed methodology, the codes improvements and we present some results for selected accidental conditions. The developed methodology combines INL state-of-the-art deterministic Best Estimate tools like RELAP5-3D code, and Probabilistic Risk Analysis tools like RAVEN and SAPHIRE codes. The analyses are performed on a three-loops pressurized water reactor (PWR) simulating accidental conditions like Station Blackout and LB-LOCA and considering near-term ATF (FeCrAl and Chromium-coated clads). Finally, we show, through our methodologies, how the delta-Core Damage Frequency can be assessed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Comparative accuracy of diffuse radiative properties computed using selected multiple scattering approximations

Computational results have been obtained for the spherical albedo, global transmission, and global absorption of plane-parallel layers composed of cloud droplets. These computations, obtained using the doubling method for the entire range of single scattering albedos and for optical depths between 0.1 and 100, are compared with corresponding results obtained using selected multiple scattering approximations. The spherical albedo and global absorption computed using asymptotic theory are found to be accurate to better than 5 percent for all values of the single scattering albedo, provided the optical thickness exceeds about 2. The diffuse two-stream approximations have relative accuracies that are much worse than 5 percent for the spherical albedo over most of the parameter space, yet are accurate to within 5 percent in the global absorption when the absorption is significant. The integrated delta-Eddington scheme appears to be the most suitable model over the entire range of variables, generally producing relative errors of less than 5 percent in both the spherical albedo and global absorption.

HARSHVARDHAN↗

Direct observation of a Fermi surface and superconducting gap in LuNi2B2C

We measured the Fermi surface (FS), band dispersion and superconducting gap in LuNi2B2C using Angle Resolved Photoemission Spectroscopy. Experimental data were compared with the tight-binding version of the Linear Muffin-Tin Orbital (LMTO) method and Linearized Augmented Plane-Wave (LAPW) calculations. We found reasonable agreement between the two calculations and experimental data. The measured FS exhibits large parallel regions with a nesting vector that agrees with a previous positron annihilation study and calculations of the generalized susceptibility. The measured dispersion curves also agree reasonably well with the TB-LMTO calculations, albeit with some differences in the strength of the hybridization. In addition, the spectrum in the superconducting state revealed a 2meV superconducting gap. The data also clearly shows the presence of a coherent peak above the chemical potential, that originates from thermally excited electrons above the energy of 2 delta. This feature was not previously observed in the Lu-based material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗