Search NASA⌕ Search

SEARCH · Search NASA

Results for “finite difference methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Autoionization resonance states of two-electron atomic systems with finite spherical confinement

We investigate the lowest-lying S-wave resonant states of two-electron atoms confined by a spherical quantum cavity under the framework of the stabilization method. Hylleraas-type wave functions (basis length N = 444) taking the correlation effects between all the charged particles into account are used in the present paper. The finite oscillator potential is used to represent the confinement potential. We present the resonant parameters (energies and widths) of the quantum-confined two-electron atoms with different depths and various ranges of the potentials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Genetic Algorithm-Based Commutation Angle Control for Torque Ripple Mitigation in Switched Reluctance Motor Drives

This work addresses the application of the Genetic Algorithm (GA) technique to optimize the commutation angles of a 2 kW 8/6 switched reluctance machine (SRM). The primary goal is to reduce the well-known drawback of SRMs: the torque ripple. Firstly, the machine was modeled in Matlab /Simulink ® using lookup tables obtained via finite element method (FEM) simulations. Subsequently, the model was used to perform the GA routine aiming to find the optimal phase commutation angles that minimize the torque ripple factor. Notably, the torque performance of the SRM was significantly affected by the commutation angles during the search for the optimal solution. Afterwards, the GA results for four different operation points were verified experimentally through a developed drive platform with digital signal processor-based (DSP) control and an asymmetric bridge converter. As showed by the experiments, the proposed approach was suitable to reduce the torque ripple by more than 50% for one of the evaluated operating points. Furthermore, it was confirmed that the torque ripple mitigation led to acoustic noise improvement.

42 ENGINEERING↗

Symmetry breaking in an extended O(2) model

Motivated by attempts to quantum simulate lattice models with continuous Abelian symmetries using discrete approximations, we study an extended-O(2) model in two dimensions that differs from the ordinary O(2) model by the addition of an explicit symmetry breaking term − h q cos ( q φ ) . Its coupling h q allows to smoothly interpolate between the O(2) model ( h q = 0 ) and a q -state clock model ( h q → ∞ ). In the latter case, a q -state clock model can also be defined for noninteger values of q . Thus, such a limit can also be considered as an analytic continuation of an ordinary q -state clock model to noninteger q . In previous work, we established the phase diagram for noninteger q in the infinite coupling limit ( h q → ∞ ). We showed that there is a second-order phase transition at low temperature and a crossover at high temperature. In this work, we seek to establish the phase diagram at finite values of the coupling using Monte Carlo and tensor methods. We show that for noninteger q , the second-order phase transition at low temperature and crossover at high temperature persist to finite coupling. For integer q = 2 , 3, 4, we know there is a second-order phase transition at infinite coupling (i.e. the well-known clock models). At finite coupling, we find that the critical exponents for q = 3 , 4 vary with the coupling, and for q = 4 the transition may turn into a Berezinskii-Kosterlitz-Thouless transition at small coupling. We comment on the similarities and differences of the phase diagrams with those of quantum simulators of the Abelian-Higgs model based on ladder-shaped arrays of Rydberg atoms. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

Quantum Monte Carlo applied to solids

We apply diffusion quantum Monte Carlo to a broad set of solids, benchmarking the method by comparing bulk structural properties (equilibrium volume and bulk modulus) to experiment and density functional theory (DFT) based theories. The test set includes materials with many different types of binding including ionic, metallic, covalent, and van der Waals. We show that, on average, the accuracy is comparable to or better than that of DFT when using the new generation of functionals, including one hybrid functional and two dispersion corrected functionals. The excellent performance of quantum Monte Carlo on solids is promising for its application to heterogeneous systems and high-pressure/high-density conditions. Important to the results here is the application of a consistent procedure with regards to the several approximations that are made, such as finite-size corrections and pseudopotential approximations. This test set allows for any improvements in these methods to be judged in a systematic way.

36 MATERIALS SCIENCE↗

Shell Structure, Melting and Dynamics of Ion Clusters Confined in an Octupolar Trap

The stable structures of clusters of identical ions trapped in an isotropic octupolar trap are investigated using global optimization methods. These clusters form well defined shells of ions that are approximately solutions of the Thomson problem. In particular, magic numbers are found to correlate with highly symmetric configurations. Using Monte Carlo simulations, finite temperature properties are also investigated. Melting proceeds from the core, and takes place through a very progressive loss of the shell structure. The hollow shape is eventually lost at very high temperatures, where the ions essentially feel the confinement but not the Coulomb repulsion. The vibrational density of states shows marked differences with the harmonic case, but also with bulk Wigner crystals. The variations of the maximal Lyapunov exponent obtained from additional molecular dynamics trajectories reveals that the dynamics becomes increasingly chaotic as the temperature increases. With the decreasing influence of the Coulomb interaction, a more regular behavior is found at very high temperatures but, contrary to the quadrupolar case, still highly chaotic.

74 ATOMIC AND MOLECULAR PHYSICS↗

A method for characterization of multiple dynamic constitutive parameters of FRCs

We propose a method to measure multiple dynamic material constitutive parameters of unidirectional fiber reinforced composites (FRCs) in a single experiment. Dynamic short-beam shear (DSBS) experiments were performed on a modified Kolsky compression bar, with integration of high-speed imaging and digital image correlation (DIC). The unidirectional FRCs investigated were S-2 glass fiber reinforced matrix of TGDDM-Jeffamine® D230 with monoamine functionalized partially reacted substructures (mPRS) and commercially available SC-15. Analytical solutions of normal and shear strains of a composite beam were derived based on Timoshenko beam theory, assuming material to be transversely isotropic and have different moduli in tension and compression in each principle material orientation. Tensile and compressive moduli were inversely computed through monitoring normal strain slope when specimen was constantly loaded at a speed of ~7.3 m/s within a small deflection. Non-linear shear stress-strain behavior of the composite was described via Ramberg–Osgood equation. Finite element (FE) analysis was conducted in ABAQUS, simultaneously defining via user subroutine UMAT the transverse isotropy of material, bi-modulus constitutive model, and non-linear shear stress-strain relation. The method proposed in this work was validated by comparing strain distributions computed by FE model and DIC measurements. Comparing with traditional dynamic tensile, compressive, and shear experiments on FRCs, this method significantly simplifies the specimen preparation and design of complicated gripping fixtures for multiple experiments. Here, systematic errors resulting from variations of specimen geometry and dimension, loading direction, and instrumentation are reduced, thereby providing compatible data for numerical studies on impact behavior of composites.

36 MATERIALS SCIENCE↗

A Model-Free No-arbitrage Price Bound for Variance Options

We suggest a numerical approximation for an optimization problem, motivated by its applications in finance to find the model-free no-arbitrage bound of variance options given the marginal distributions of the underlying asset. A first approximation restricts the computation to a bounded domain. Then we propose a gradient projection algorithm together with the finite difference scheme to solve the optimization problem. We prove the general convergence, and derive some convergence rate estimates. Finally, we give some numerical examples to test the efficiency of the algorithm.

97 MATHEMATICS AND COMPUTING↗

BCS-BEC crossover in symmetric nuclear matter at finite temperature: Pairing fluctuation and pseudogap

By adopting a T-matrix-based method within the G{sub 0}G approximation for the pair susceptibility, we studied the effects of pairing fluctuation on the BCS-BEC crossover in symmetric nuclear matter. The pairing fluctuation induces a pseudogap in the excitation spectrum of a nucleon in both superfluid and normal phases. The critical temperature of the superfluid transition was calculated. It differs from the BCS result remarkably when density is low. We also computed the specific heat, which shows a nearly ideal BEC-type temperature dependence at low density, but a BCS-type behavior at high density. This qualitative change of the temperature dependence of specific heat may serve as a thermodynamic signal for the BCS-BEC crossover.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Conjugate heat and mass transfer in the lattice Boltzmann equation method

An interface treatment for conjugate heat and mass transfer in the lattice Boltzmann equation method is proposed based on our previously proposed second-order accurate Dirichlet and Neumann boundary schemes. The continuity of temperature (concentration) and its flux at the interface for heat (mass) transfer is intrinsically satisfied without iterative computations, and the interfacial temperature (concentration) and their fluxes are conveniently obtained from the microscopic distribution functions without finite-difference calculations. The present treatment takes into account the local geometry of the interface so that it can be directly applied to curved interface problems such as conjugate heat and mass transfer in porous media. For straight interfaces or curved interfaces with no tangential gradient, the coupling between the interfacial fluxes along the discrete lattice velocity directions is eliminated and thus the proposed interface schemes can be greatly simplified. Several numerical tests are conducted to verify the applicability and accuracy of the proposed conjugate interface treatment, including (i) steady convection-diffusion in a channel containing two different fluids, (ii) unsteady convection-diffusion in the channel, (iii) steady heat conduction inside a circular domain with two different solid materials, and (iv) unsteady mass transfer from a spherical droplet in an extensional creeping flow. The accuracy and order of convergence of the simulated interior temperature (concentration) field, the interfacial temperature (concentration), and heat (mass) flux are examined in detail and compared with those obtained from the "half-lattice division" treatment in the literature. The present analysis and numerical results show that the half-lattice division scheme is second-order accurate only when the interface is fixed at the center of the lattice links, while the present treatment preserves second-order accuracy for arbitrary link fractions. For curved interfaces, the present treatment yields second-order accurate interior and interfacial temperatures (concentrations) and first-order accurate interfacial heat (mass) flux. An increase of order of convergence by one degree is obtained for each of these three quantities compared with the half-lattice division scheme. The surface-averaged Sherwood numbers computed in test (iv) agree well with published results.

Li, LK↗

Reverse Monte Carlo modeling for low-dimensional systems

Reverse Monte Carlo (RMC) is one of the commonly used approaches for modeling total scattering data. However, to extend the capability of the RMC method for refining the structure of nanomaterials, the dimensionality and finite size need to be considered when calculating the pair distribution function (PDF). To achieve this, the simulation box must be set up to remove the periodic boundary condition in one, two or three of the dimensions. This then requires a correction to be applied for the difference in number density between the real system and the simulation box. In certain circumstances an analytical correction for the uncorrelated pairings of atoms is also applied. The validity and applicability of our methodology is demonstrated by applying the algorithms to simulate the PDF patterns of carbon systems with various dimensions, and also by using them to fit experimental data of CuO nanoparticles. This alternative approach for characterizing the local structure of nano-systems with the total scattering technique will be made available via the RMCProfile package. The theoretical formulation and detailed explanation of the analytical corrections for low-dimensional systems – 2D nanosheets, 1D nanowires and 0D nanoparticles – is also given.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coupled Neutron and Gamma Heating Calculation Based on VARIANT Nodal Transport Method

Accurate determination of temperature distributions in fuel pins and duct walls is essential for fuel-pin performance and assembly bowing analyses. Currently, the multi-assembly, sub-channel analysis code SE2-ANL is used in thermalhydraulic analysis of sodium cooled fast reactors (SFR). SE2- ANL is interfaced with the DIF3D/GAMSOR/DIF3D procedure for coupled neutron and gamma heating calculations, developed at Argonne National Laboratory (ANL). In this procedure, the neutron flux distribution is first calculated using the finite-difference diffusion theory option of the DIF3D code. Using the neutron flux solution, the GAMSOR code computes the gamma source distribution for the subsequent gamma flux calculation with DIF3D. However, in the current heating calculation scheme, the neutron and gamma flux calculations are limited to six triangular meshes per hexagonal assembly. In addition, the pin power distributions are estimated by assuming that the power distribution within an assembly is separable in the radial and axial directions. In each assembly, the axial power profile is obtained by averaging the power densities of six triangular meshes at each axial mesh interval. The radial power profile is evaluated at a single axial mesh (e.g., at the core mid-plane) by approximating the neutron and gamma flux distributions by a linear or quadratic polynomial of two variables x and y, depending on the polynomial order specified by the user. The coefficients of the linear and quadratic polynomials are determined by the least squares fit of six and 24 triangular mesh fluxes, respectively. Furthermore, the total heat generation rate in an assembly duct wall is simply determined by a user-specified fraction of the total gamma heating within that assembly. With the advancement of computer technology, the nodal transport theory code VARIANT is routinely used in core design analyses of SFR instead of DIF3D. It is therefore necessary to develop a new heating calculation procedure based on VARIANT neutron and gamma transport calculations. In this study, a new, coupled neutron and gamma heating calculation scheme has been developed to determine the pin power distributions more accurately by eliminating the aforementioned limitations of the current procedure. For this, the GAMSOR code has been extended to generate the intra-nodal gamma source distribution to be consistent with the trial functions of VARIANT. In the new heating calculation procedure, the neutron flux distribution is determined first by solving an eigenvalue transport problem using VARIANT. The obtained neutron flux is then used in GAMSOR to calculate the gamma source distribution. Using this gamma source distribution, the gamma flux distribution is determined by solving a fixed-source transport problem using VARIANT again. Using the computed neutron and gamma flux distributions, the power distribution in each fuel pin and duct wall is determined using a new utility code CURVE, which has been developed to evaluate the VARIANT flux solution at each fuel pin position and along the duct mid-wall. For each pin segment contained in a VARIANT node, the axial power shape is represented as a quadratic profile. The performance of the new heating calculation scheme based on VARIANT transport solutions has been tested against the existing method of SE2-ANL, using the ABR-1000 metal core design. The gamma source distribution and the assembly, fuel pin and duct wall power distributions were calculated and compared. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Comparative Study of the Efficacy of Local/Global and Parametric/Nonparametric Machine Learning Methods for Establishing Structure–Property Linkages in High-Contrast 3D Elastic Composites

Reduced-order structure–property (S-P) linkages play a pivotal role in the tailored design of materials for advanced engineering components. There is a critical need to distill these from the simulation datasets aggregated using sophisticated, computationally expensive, physics-based numerical tools (e.g., finite element methods). The recent emergence of materials data science approaches has opened new avenues for addressing this challenge. In this paper, we critically compare the relative merits of the application of four distinct machine learning approaches for their efficacy in extracting microstructure-property linkages from the finite element simulation data aggregated on high-contrast elastic composites with different microstructures. The machine learning approaches selected for the study have included different combinations of local/global and parametric/nonparametric approaches. Furthermore, the nonparametric approaches selected for this study are based on Gaussian Process (GP) models that allow for a formal treatment of uncertainty quantification in the predicted values. The predictive performances of these different approaches have been compared against each other using rigorous cross-validation error metrics. Furthermore, their sensitivity to both the dataset size and dimensionality has been investigated.

36 MATERIALS SCIENCE↗

Convergent laser beam shapes: Unveiling the dynamics of Laser-induced elastic waves in composite materials

Overcoming the low signal-to-noise ratio (SNR) in laser ultrasonic testing of composite materials remains a significant challenge. Current efforts focus on enhancing SNR by inserting more energy into the material through temporal and/or spatial modulation of the laser beam. However, potential SNR improvements through wave convergence and wave energy manipulation have been overlooked. This paper addresses this gap by demonstrating the convergence of different wave types to a designated point and by showing the feasibility of directing absorbed laser energy into a specific wave type through spatial modulation of the laser beam. To achieve this, mathematical expressions for the convergent laser beams are derived. Various laser beam profiles are then introduced to the thermoelastic equations and solved using the finite element method. The sample under investigation is a transversely isotropic unidirectional carbon fiber reinforced plastic, characterized by anisotropic thermal expansion coefficients and thermal conductivities. Results reveal pronounced convergence of the intended wave type at the center due to laser beam shaping. This study showcases the ability to direct absorbed laser energy toward a specific wave type through spatial modulation of the laser beam and highlights the role of material anisotropy in energy focusing.

composite materials↗

Constructing precisely quasi-isodynamic magnetic fields

We present a novel method for numerically finding quasi-isodynamic stellarator magnetic fields with excellent fast-particle confinement and extremely small neoclassical transport. The method works particularly well in configurations with only one field period. We examine the properties of these newfound quasi-isodynamic configurations, including their transport coefficients, particle confinement and available energy for trapped-electron-instability-driven turbulence, as well as the degree to which they change when a finite pressure profile is added. We finally discuss the differences between the magnetic axes of the optimized solutions and their respective initial conditions, and conclude with the prospects for future quasi-isodynamic optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Seebeck coefficient of one electron

The Seebeck coefficient of one electron, driven thermally into a semiconductor single-electron box, is investigated theoretically. With a finite temperature difference ΔT between the source and charging island, a single electron can charge the island in equilibrium, directly generating a Seebeck effect. Seebeck coefficients for small and finite ΔT are calculated and a thermally driven Coulomb staircase is predicted. Single-electron Seebeck oscillations occur with increasing ΔT, as one electron at a time charges the box. A method is proposed for experimental verification of these effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Efficient optical absorption enhancement in organic solar cells by using a 2-dimensional periodic light trapping structure

We have investigated the effects induced by periodic nanosphere arrays on the performance of organic solar cells (OSCs). Two-dimensional periodic arrays of polystyrene nanospheres were formed by using a colloidal lithography method together with plasma etching to trim down the size to various degrees on the substrates of OSCs. It is found that the devices prepared on such substrates can have improved light harvesting, resulting in as high as 35% enhancement in power conversion efficiency over that of the reference devices. The measured external quantum efficiency and finite-difference time-domain simulation reveal that the controlled periodic morphology of the substrate can efficiently increase light scattering in the device and thus enhance the absorption of incident light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗