Results for “flow efficiency” — Page 84

NASA NTRS1981

Development of a preprototype Sabatier CO2 reduction subsystem

A lightweight, quick starting reactor utilizes a highly active and physically durable methanation catalyst composed of ruthenium on alumina. The use of this improved catalyst permits a single straight through plug flow design with an average lean component H2/CO2 conversion efficiency of over 99% over a range of H2/CO2 molar ratios of 1.8 to 5 while operating with flows equivalent to a crew size of one person steadystate to 3 persons cyclical. The reactor requires no heater operation after start-up even during simulated 55 minute lightside/39 minute darkside orbital operation over the above range of molar ratios and crew loadings. Subsystem performance was proven by parametric testing and endurance testing over a wide range of crew sizes and metabolic loadings. The subsystem's operation and performance is controlled by a microprocessor and displayed on a nineteen inch multi-colored cathode ray tube.

Kleiner, G. N.↗

NASA NTRS1981

Finite element analysis of transonic flows in cascades: Importance of computational grids in improving accuracy and convergence

The finite element method is applied for the solution of transonic potential flows through a cascade of airfoils. Convergence characteristics of the solution scheme are discussed. Accuracy of the numerical solutions is investigated for various flow regions in the transonic flow configuration. The design of an efficient finite element computational grid is discussed for improving accuracy and convergence.

Ecer, A.↗

NASA NTRS1981

IGDS/TRAP Interface Program (ITIP). Software Design Document

The preliminary design of the IGDS/TRAP Interface Program (ITIP) is described. The ITIP is implemented on the PDP 11/70 and interfaces directly with the Interactive Graphics Design System and the Data Management and Retrieval System. The program provides an efficient method for developing a network flow diagram. Performance requirements, operational rquirements, and design requirements are discussed along with sources and types of input and destination and types of output. Information processing functions and data base requirements are also covered.

Jefferys, Steve↗

NASA NTRS1982

Droplets Generated from a new OGEE shaped, liquid, air-shear, electrostatic nozzle

A series of experimental tests was carried out on an 'OGEE' shaped planform, liquid air-shear electrostatic nozzle. Liquid was ejected from the upper surface of the nozzle and was then dispersed and atomized efficiently by a high speed air flow passing over the nozzle and by the effect of two very strong coherent air vortices generated by the 'OGEE' shaped nozzle surface. Initial test results which are presented show the nozzle to perform far superior to a similar delta wing shaped design which is used extensively in various industries applications.

Inculet, I. I.↗

NASA NTRS1982

Application of a finite element algorithm for the solution of steady transonic Euler equations

A finite element algorithm for the solution of two-dimensional, steady Euler equations is presented which, through a Clebsch-type transformation for the velocity vector, solves the conservation of mass equation with one primary variable and two additional equations for the convection of two new variables. The accuracy and efficiency of this scheme is discussed, and the second-order accuracy attained in the analysis of the convection of the vorticity is demonstrated together with the efficient treatment of rotational and irrotational flow subregions. A sample problem is used to show the accuracy of the numerical scheme and its convergence characteristics.

Akay, H. U.↗

NASA NTRS1984

Fully Implicit Numerical Methods for the Baroclinic Primitive Equations

A fully implicit code was developed to solve the three-dimensional primitive equations of atmospheric flow. The scheme is second order accurate in time and fourth order accurate in the horizontal and vertical directions. Furthermore, as a result of being fully implicit, the time step is not restricted by the mesh spacing near the poles, nor by the speed of inertia-gravity waves. Rather, the time step, deltat is determined simply by the requirement that it be small enough to adequately resolve the atmospheric flow of interest. The accuracy and efficiency of current models for fine grids should be significantly improved.

Cohn, S. E.↗

NASA NTRS1985

Navier-Stokes computations for exotic airfoils

An efficient hyperbolic grid generator with improvements for handling sharp corners and concave surfaces is combined with an efficient and accurate Navier-Stokes flow solver. This combination is applied to some rather complex two-dimensional airfoil configurations. Steady separated flow about an iced leading edge of an airfoil is presented. Unsteady viscous separated flows past an airfoil at two angles of attack with a spoiler deployed at 60 degrees are presented and compared with experiment. The spoiler computations are performed with two different topological maps of the physical domain to the computational domain. Innovative graphical techniques for both the static and unsteady display of the flow fields are presented and discussed.

Barth, T. J.↗

NASA NTRS1986

Emission FTIR analyses of thin microscopic patches of jet fuel residues deposited on heated metal surfaces

The relationship of fuel stability to fuel composition and the development of mechanisms for deposit formation were investigated. Fuel deposits reduce heat transfer efficiency and increase resistance to fuel flow and are highly detrimental to aircraft performance. Infrared emission Fourier transform spectroscopy was chosen as the primary method of analysis because it was sensitive enough to be used in-situ on tiny patches of monolayers or of only a few molecular layers of deposits which generally proved completely insoluble in any nondestructive solvents. Deposits of four base fuels were compared; dodecane, a dodecane/tetralin blend, commercial Jet A fuel, and a broadened-properties jet fuel particularly rich in polynuclear aromatics. Every fuel in turn was provided with and without small additions of such additives as thiophene, furan, pyrrole, and copper and iron naphthenates.

Lauer, J. L.↗

NASA NTRS1987

Development of upwind schemes for the Euler equations

Described are many algorithmic and computational aspects of upwind schemes and their second-order accurate formulations based on Total-Variation-Diminishing (TVD) approaches. An operational unification of the underlying first-order scheme is first presented encompassing Godunov's, Roe's, Osher's, and Split-Flux methods. For higher order versions, the preprocessing and postprocessing approaches to constructing TVD discretizations are considered. TVD formulations can be used to construct relaxation methods for unfactored implicit upwind schemes, which in turn can be exploited to construct space-marching procedures for even the unsteady Euler equations. A major part of the report describes time- and space-marching procedures for solving the Euler equations in 2-D, 3-D, Cartesian, and curvilinear coordinates. Along with many illustrative examples, several results of efficient computations on 3-D supersonic flows with subsonic pockets are presented.

Chakravarthy, Sukumar R.↗

NASA NTRS1987

Application of stability theory to laminar flow control - Progress and requirements

Paper briefly summarizes the current status of linear stability theory as applied to laminar flow control for aerodynamics. Results indicate that the conventional 'N factor' method of correlating stability theory and transition has a broad application range, including low- and high-speeds, two- and three-dimensional mean flow and TS, Gortler and crossflow disturbance modes. Linear theory is particularly applicable to the laminar flow control problem as, for system efficiency, control must be exercised and disturbances maintained in the linear regime. Current areas of concern for LFC, which require further stability theory research, include TS-crossflow interaction, combined disturbance fields (roughness, waviness, noise) and suction-induced disturbances. Some results on wave-interactions are presented.

Bushnell, D. M.↗

NASA NTRS1988

Lateral jet injection into swirling combustor flowfields

An experimental program has been conducted to ascertain the effects of the number of lateral jets, the jet velocity ratio, and the crossflow swirl strength, on the isothermal flowfield patterns in jets injected normally to a round-section crossflow. Attention has been given to the trajectory, penetration, and mixing efficiency of the lateral injection, using flow visualization, pitot-probe and hot-wire methods. In addition, such predictive techniques as a simple, explicit, fully three-dimensional turbulent computer code have been employed.

Lilley, David G.↗

NASA NTRS1991

Three-dimensional incompressible Navier-Stokes solver using lower-upper symmetric-Gauss-Seidel algorithm

A numerical method based on the pseudocompressibility concept is developed for solving the three-dimensional incompressible Navier-Stokes equations using the lower-upper symmetric-Gauss-Seidel implicit scheme. Very high efficiency is achieved in a new flow solver, INS3D-LU code, by accomplishing the complete vectorizability of the algorithm on oblique planes of sweep in three dimensions.

Yoon, Seokkwan↗

NASA NTRS1991

Solution-adaptive program SADAP3D

A generic solution-adaptive grid program based on an error equi-distribution concept has been developed for use in complex multidimensional flows. The capability of a generic, user-friendly, multidimensional algorithm is demonstrated using several complex 3D flows in high-speed regimes. A simple scheme enforces the continuity of grid spacing along each currently adapted grid line as the computation proceeds. Calculation of normal vectors at each point of a grid plane is enhanced. The grid movement is automatically controlled by reinstating grid-spacing continuity locally in the mainstream of the unidirectional computation. It is concluded that the scheme can be readily coupled with many flow solvers to enhance accuracy and efficiency of solutions.

Djomehri, M. J.↗

NASA NTRS1991

A fast implicit upwind solution algorithm for three-dimensional unstructured dynamic meshes

A fast implicit upwind algorithm for the solution of the time-dependent Euler equations is presented for aerodynamic analysis involving unstructured dynamic meshes. The spatial discretization of the scheme is based on the upwind approach of Roe, referred to as flux-difference splitting (FDS). The FDS approach is naturally dissipative and captures shock waves and contact discontinuities sharply. The temporal discretization of the scheme involves an implicit time-integration using a two-sweep Gauss-Seidel relaxation procedure. The procedure is computationally efficient for either steady or unsteady flow problems. A detailed description is given of the implicit upwind solution algorithm along with results which assess the capability. The results are presented for the NACA 0012 airfoil and for the Boeing 747 aircraft. The 747 geometry includes the fuselage, wing, horizontal and vertical tails, under-wing pylons, and flow-through engine nacelles. Euler solutions for the 747 aircraft on an unstructured tetrahedral mesh containing approximately 100,000 cells were obtained to engineering accuracy in less than one hour CPU time on a Cray-2 computer.

Batina, John T.↗

NASA NTRS1992

Predictive onboard flow control for packet switching satellites

We outline two alternate approaches to predicting the onset of congestion in a packet switching satellite, and argue that predictive, rather than reactive, flow control is necessary for the efficient operation of such a system. The first method discussed is based on standard, statistical techniques which are used to periodically calculate a probability of near-term congestion based on arrival rate statistics. If this probability exceeds a present threshold, the satellite would transmit a rate-reduction signal to all active ground stations. The second method discussed would utilize a neural network to periodically predict the occurrence of buffer overflow based on input data which would include, in addition to arrival rates, the distributions of packet lengths, source addresses, and destination addresses.

Bobinsky, Eric A.↗

NASA NTRS1992

A fast implicit upwind solution algorithm for three-dimensional unstructured dynamic meshes

A fast implicit upwind algorithm for the solution of the time-dependent Euler equations is presented for aerodynamic analysis involving unstructured dynamic meshes. The spatial discretization of the scheme is based on the upwind approach of Roe, referred to as flux-difference splitting (FDS). The FDS approach is naturally dissipative and captures shock waves and contact discontinuities sharply. The temporal discretization of the scheme involves an implicit time-integration using a two-sweep Gauss-Seidel relaxation procedure. The procedure is computationally efficient for either steady or unsteady flow problems. A detailed description is given of the implicit upwind solution algorithm along with results which assess the capability. The results are presented for the NACA 0012 airfoil and for the Boeing 747 aircraft. The 747 geometry includes the fuselage, wing, horizontal and vertical tails, under-wing pylons, and flow-through engine nacelles. Euler solutions for the 747 aircraft on an unstructured tetrahedral mesh containing approximately 100,000 cells were obtained to engineering accuracy in less than one hour CPU time on a Cray-2 computer.

Batina, John T.↗

NASA NTRS1992

Predictive onboard flow control in packet switching satellites

We outline two alternate approaches to predicting the onset of congestion in a packet switching satellite, and argue that predictive, rather than reactive, flow control is necessary for the efficient operation of such a system. The first method discussed is based on standard, statistical techniques which are used to periodically calculate a probability of near-term congestion based on arrival rate statistics. If this probability exceeds a present threshold, the satellite would transmit a rate-reduction signal to all active ground stations. The second method discussed would utilize a neural network to periodically predict the occurrence of buffer overflow based on input data which would include, in addition to arrival rates, the distributions of packet lengths, source addresses, and destination addresses.

Bobinsky, E. A.↗

NASA NTRS1993

Current technologies for waverider aircraft

'Waverider' hypersonic vehicle configuration-related technologies are presently discussed for both the Mach 4-7 and Mach 8-12 speed regimes. These technologies encompass engine cycle selection, propulsion system integration, thermal management, structural design, materials selection, and stability/control. The integration of the propulsion system may require novel techniques for efficient blending of inlet and nozzle flows with forebody and afterbody contours.

Hagseth, Paul E.↗