Search NASA⌕ Search

SEARCH · Search NASA

Results for “gradient methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Simple methods for determining the virtual origin of turbulent boundary layers in hypersonic flow on sharp-edged flat plates

Two methods for determining the virtual origin of turbulent boundary layers in hypersonic flow are evaluated. The results of the analyses are restricted to wind-tunnel models having sharp-edged surfaces with zero or small pressure gradients. Virtual origin and skin friction estimates from these two methods are compared with values from a base method for which the virtual origin is calculated from the measured momentum thickness at a station downstream of boundary layer transition.

Hopkins, E. J.↗

A non-linear discontinuous Petrov-Galerkin method for removing oscillations in the solution of the time-dependent transport equation

This paper describes a Non-Linear Discontinuous Petrov-Galerkin method and its application to the one-speed Boltzmann Transport Equation (BTE) for space-time problems. The purpose of the method is to remove unwanted oscillations in the transport solution which occur in the vicinity of sharp flux gradients, while improving computational efficiency and numerical accuracy. This is achieved by applying artificial dissipation in the solution gradient direction, internal to an element using a novel finite element (FE) Riemann approach. The added dissipation is calculated at each node of the finite element mesh based on local behaviour of the transport solution on both the spatial and temporal axes of the problem. Thus a different dissipation is used in different elements. The magnitude of dissipation that is used is obtained from a gradient-informed scaling of the advection velocities in the stabilisation term. This makes the method in its most general form non-linear. The method is implemented within a very general finite element Riemann framework. This makes it completely independent of choice of angular basis function allowing one to use different descriptions of the angular variation. Results show the non-linear scheme performs consistently well in demanding time-dependent multi-dimensional neutron transport problems. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Remobilizing the Interface of Thermocapillary Driven Bubbles Retarded By the Adsorption of a Surfactant Impurity on the Bubble Surface

Thermocapillary migration is a method for moving bubbles in space in the absence of buoyancy. A temperature gradient is the continuous phase in which a bubble is situated, and the applied gradient impressed on the bubble surface causes one pole of the drop to be cooler than the opposite pole. As the surface tension is a decreasing function of temperature, the cooler pole pulls at the warmer pole, creating a flow that propels the bubble in the direction of the warmer fluid. A major impediment to the practical use of thermocapillary to direct the movement of bubbles in space is the fact that surfactant impurities, which are unavoidably present in the continuous phase, can significantly reduce the migration velocity. A surfactant impurity adsorbed onto the bubble interface is swept to the trailing end of the bubble. When bulk concentrations are low (which is the case with an impurity), diffusion of surfactant to the front end is slow relative to convection, and surfactant collects at the back end of the bubble. Collection at the back lowers the surface tension relative to the front end setting up a reverse tension gradient. (This can also be the case if kinetic desorption of surfactant at the back end of the bubble is much slower than convection.) For buoyancy driven bubble motions in the absence of a thermocapillarity, the tension gradient opposes the surface flow, and reduces the surface and terminal velocities (the interface becomes more solid-like and bubbles translate as solid particles). When thermocapillary forces are present, the reverse tension gradient set up by the surfactant accumulation reduces the temperature-induced tension gradient, and can decrease to near zero the bubble's thermocapillary velocity. The objective of our research is to develop a method for enhancing the thermocapillary migration of bubbles which have be retarded by the adsorption onto the bubble surface of a surfactant impurity. Our remobilization theory proposes to use surfactant molecules which kinetically rapidly exchange between the bulk and the surface and are at high bulk concentrations. Because the remobilizing surfactant is present at much higher concentrations than the impurity, it adsorbs to the bubble surface much faster than the impurity when the bubble is formed, and thereby prevents the impurity from adsorbing onto the surface. In addition, the rapid kinetic exchange and high bulk concentration maintain a saturated surface with uniform surface concentrations. This prevents retarding surface tension gradients and keeps the thermocapillary velocity high. In our reports over the first 2 years, we presented numerical simulations of the bubble motion and surfactant transport which verified theoretically the concept of remobilization, and the development of an apparatus to track and measure the velocity of rising bubbles in a glycerol/water surfactant solution. This year, we detail experimental observations of remobilization. Two polyethylene oxide surfactants were studied, C12E6 (CH3(CH2)11(OCH2)6OH) and C10E8 (CH3(CH2)4(OCH2CH2)8OH). Measurements of the kinetic exchange for these surfactants show that the one with the longer hydrophobe chain C12E6 has a lower rate of kinetic exchange. In addition, this surfactant is much less soluble in the glycerol/water mixture because of the shorter ethoxylate chain. As a result, we found that C12E6 had only a very limited ability to remobilize rising bubbles because of the limited kinetic exchange and reduced solubility. However, C10E8, with its higher solubility and more rapid exchange was found to dramatically remobilize rising bubbles. We also compared our theoretical calculations to the experimental measurements of velocity for both the non-remobilizing and remobilizing surfactants and found excellent agreement. We further observed that for C10E8 at high concentrations, which exceeded the critical micelle concentrations, additional remobilization was measured. In this case the rapid exchange of monomer between micelle and surfactant provides an additional mechanism for maintaining a uniform surface concentrations.

Palaparthi, Ravi↗

Mott vs Kondo: Influence of various density functional based methods on the Ce isostructural phase transition mechanism

The cerium iso-structural phase transition (γ–α) is dominated by f-electron localization changes that results in a magnetic ordering change and a volume collapse. Generally, these physics are difficult to capture with ab initio and first principles methods. However, previous works have shown various methods to be successful in predicting at least some of the physics of the γ to α phase transition. Therefore, here, we perform a broad survey of density functional based methods across three levels of theory and types of functions [GGA (generalized gradient approximation), MetaGGA, and hybrid functionals] and compare the results, focusing on hydrostatic compression across the phase boundary at zero kelvin. For the methods that best reproduce experimental results, we directly probe the predicted mechanisms and frame the results in the Mott/Kondo debate, assessing how the underlying methods and assumptions of different functionals can assess the physical drivers in the phase transition, providing insight into the governing processes of this unique phase transition.

36 MATERIALS SCIENCE↗

Extreme wind shear events in US offshore wind energy areas and the role of induced stratification

As the offshore wind industry emerges on the US East Coast, a comprehensive understanding of the wind resource – particularly extreme events – is vital to the industry's success. Such understanding has been hindered by a lack of publicly available wind profile observations in offshore wind energy areas. However, the New York State Energy Research and Development Authority recently funded the deployment of two floating lidars within two current lease areas off the coast of New Jersey. These floating lidars provide publicly available wind speed data from 20 to 200 m height with a 20 m vertical resolution. In this study, we leverage a year of these lidar data to quantify and characterize the frequent occurrence of high-wind-shear and low-level-jet events, both of which will have a considerable impact on turbine operation. In designing a detection algorithm for these events, we find that the typical, non-dimensional power-law-based wind shear exponent is insufficient to identify many of these extreme, high-wind-speed events. Rather, we find that the simple vertical gradient of wind speed better captures the events. Based on this detection method, we find that almost 100 independent events occur throughout the year with mean wind speed at 100 m height and wind speed gradient of 16 m s -1 and 0.05 s -1 , respectively. The events have strong seasonal variability, with the highest number of events in summer and the lowest in winter. A detailed analysis reveals that these events are enabled by an induced stable stratification when warmer air from the south flows over the colder mid-Atlantic waters, leading to a positive air–sea temperature difference.

17 WIND ENERGY↗

An adaptive grid, unsteady model for two-dimensional magnetohydrodynamic (MHD) flow

An adaptive grid finite difference method for solving multi-dimensional, time-dependent, magnetohydrodynamic (MHD) equations is developed. The method is capable of solving problems that include high gradients due to geometry, propagation of shock waves and unsteady boundary conditions. The grid generation technique is based on variational principles with direct control over grid concentration, smoothness and skewness. An example for a two-dimensional MHD simulation of the propagation of a solar-flare-generated shock wave in solar wind flow in the heliographic equatorial plane is selected for illustration of this method.

Panitchob, Supat↗

Data Images and Other Graphical Displays for Directional Data

Vectors, axes, and periodic phenomena have direction. Directional variation can be expressed as points on a unit circle and is the subject of circular statistics, a relatively new application of statistics. An overview of existing methods for the display of directional data is given. The data image for linear variables is reviewed, then extended to directional variables by displaying direction using a color scale composed of a sequence of four or more color gradients with continuity between sequences and ordered intuitively in a color wheel such that the color of the 0deg angle is the same as the color of the 360deg angle. Cross over, which arose in automating the summarization of historical wind data, and color discontinuity resulting from the use a single color gradient in computational fluid dynamics visualization are eliminated. The new method provides for simultaneous resolution of detail on a small scale and overall structure on a large scale. Example circular data images are given of a global view of average wind direction of El Nino periods, computed rocket motor internal combustion flow, a global view of direction of the horizontal component of earth's main magnetic field on 9/15/2004, and Space Shuttle solid rocket motor nozzle vectoring.

Morphet, Bill↗

Very Large Scale Optimization

The purpose of this research under the NASA Small Business Innovative Research program was to develop algorithms and associated software to solve very large nonlinear, constrained optimization tasks. Key issues included efficiency, reliability, memory, and gradient calculation requirements. This report describes the general optimization problem, ten candidate methods, and detailed evaluations of four candidates. The algorithm chosen for final development is a modern recreation of a 1960s external penalty function method that uses very limited computer memory and computational time. Although of lower efficiency, the new method can solve problems orders of magnitude larger than current methods. The resulting BIGDOT software has been demonstrated on problems with 50,000 variables and about 50,000 active constraints. For unconstrained optimization, it has solved a problem in excess of 135,000 variables. The method includes a technique for solving discrete variable problems that finds a "good" design, although a theoretical optimum cannot be guaranteed. It is very scalable in that the number of function and gradient evaluations does not change significantly with increased problem size. Test cases are provided to demonstrate the efficiency and reliability of the methods and software.

Vanderplaats, Garrett↗

Inverse Normalization Method for Cross-Sectional Imaging and Velocimetry of Two-Phase Flows Based on Electrical Capacitance Tomography

Proper normalization of the measured capacitance data is a prerequisite in electrical capacitance tomography (ECT). Conventional methods, such as parallel and series normalization, assume a higher permittivity perturbation in a homogeneous (lower) permittivity background. Although this is applicable to a number of cases, some two-phase flows are better modeled instead as a lower permittivity perturbation in a homogeneous (higher) permittivity background. A different normalization method is proposed for such cases, which provides similar image quality as conventional, but is particularly beneficial for velocimetry applications based on sensitivity gradient of ECT sensor. Furthermore, simulation and experimental results are provided to illustrate the advantages for the proposed normalization technique.

47 OTHER INSTRUMENTATION↗

RACORO continental boundary layer cloud investigations. Part I: Case study development and ensemble large-scale forcings

Observation-based modeling case studies of continental boundary layer clouds have been developed to study cloudy boundary layers, aerosol influences upon them, and their representation in cloud- and global-scale models. Three 60-hour case study periods span the temporal evolution of cumulus, stratiform, and drizzling boundary layer cloud systems, representing mixed and transitional states rather than idealized or canonical cases. Based on in-situ measurements from the RACORO field campaign and remote-sensing observations, the cases are designed with a modular configuration to simplify use in large-eddy simulations (LES) and single-column models. Aircraft measurements of aerosol number size distribution are fit to lognormal functions for concise representation in models. Values of the aerosol hygroscopicity parameter, κ, are derived from observations to be ~0.10, which are lower than the 0.3 typical over continents and suggestive of a large aerosol organic fraction. Ensemble large-scale forcing datasets are derived from the ARM variational analysis, ECMWF forecasts, and a multi-scale data assimilation system. The forcings are assessed through comparison of measured bulk atmospheric and cloud properties to those computed in 'trial' large-eddy simulations, where more efficient run times are enabled through modest reductions in grid resolution and domain size compared to the full-sized LES grid. Simulations capture many of the general features observed, but the state-of-the-art forcings were limited at representing details of cloud onset, and tight gradients and high-resolution transients of importance. Methods for improving the initial conditions and forcings are discussed. The cases developed are available to the general modeling community for studying continental boundary clouds.

54 ENVIRONMENTAL SCIENCES↗

Simulating bubble dynamics in a buoyant system

Summary Multiphase flows are critical components of many physical systems; however, numerical models of multiphase flows with large parameter gradients can be challenging. Here, two different numerical methods, volume of fluid (VOF) and smoothed particle hydrodynamics (SPH), are used to model the buoyant rise of isolated gas bubbles through quiescent fluids for a range of Bond and Reynolds numbers. The VOF is an Eulerian grid–based method, whereas the SPH is Lagrangian and mesh free. Each method has unique strengths and weaknesses, and a comparison of the two approaches as applied to multiphase phenomena has not previously been performed. The VOF and SPH simulations are compared, verified, and validated. Results using two‐dimensional VOF and SPH simulations are similar to each other and are able to reproduce numerical benchmarks and experimental results for sufficiently large Morton and Reynolds numbers. It is also shown that at low Reynolds numbers, the two methods, SPH and VOF, diverge in the transient regime of the bubble rise. Regimes that require simulations capable of representing three‐dimensional drag are identified as well as regimes in which results from VOF and SPH diverge.

Arai, Erin↗

Modeling and simulation of oxygen transport in high burnup LWR fuel

We have developed a formulation for oxygen transport in uranium dioxide nuclear fuel that accounts for the effects of irradiation. The overall simulation combines the evolving isotopic composition, thermochemistry, and oxygen transport in irradiated fuel. The driving forces for oxygen transport are computed from local thermodynamic equilibrium calculations and account for the effects of temperature gradients and composition, including fission products. The proposed method provides a mechanism for including complex thermodynamic models of nuclear fuel in modeling of mass redistribution, and alleviates difficulties associated with the common thermodiffusion formulation. Here, the transport model has been implemented within the nuclear fuel performance code BISON utilizing the thermochemistry code Thermochimica, with burnup calculations provided by the ORIGEN isotopic transmutation code.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Determining concentration depth profiles in fluorinated networks by means of electric force microscopy

By means of electric force microscopy, composition depth profiles were measured with nanometric resolution for a series of fluorinated networks. By mapping the dielectric permittivity along a line going from the surface to the bulk, we were able to experimentally access to the fluorine concentration profile. Obtained data show composition gradient lengths ranging from 30 nm to 80 nm in the near surface area for samples containing from 0.5 to 5 wt. % F, respectively. In contrast, no gradients of concentration were detected in bulk. This method has several advantages over other techniques because it allows profiling directly on a sectional cut of the sample. By combining the obtained results with x-ray photoelectron spectroscopy measurements, we were also able to quantify F/C ratio as a function of depth with nanoscale resolution.

36 MATERIALS SCIENCE↗

Amplification and reversal of Knudsen force by thermoelectric heating

We show that the Knudsen thermal force generated by a thermally-induced flow over a heated beam near a colder wall could be amplified significantly by thermoelectric heating. Bidirectional actuation is achieved by switching the polarity of the thermoelectric device bias voltage. The measurements of the resulting thermal forces at different rarefaction regimes, realized by changing geometry and gas pressure, are done using torsional microbalance. The repulsive or attractive forces between a thermoelectrically heated or cooled plate and a substrate are shown to be up to an order of magnitude larger than for previously studied configurations and heating methods due to favorable coupling of two thermal gradients. The amplification and reversal of the Knudsen force is confirmed by numerical solution of the Boltzmann-ESBGK kinetic model equation. Because of the favorable scaling with decreasing system size, the Knudsen force with thermoelectric heating offers a novel actuation and sensing mechanism for nano/microsystems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of a vector-tensor system to measure the absolute magnetic flux density and its gradient in magnetically shielded rooms

Several experiments in fundamental physics demand an environment of very low, homogeneous, and stable magnetic fields. For the magnetic characterization of such environments, we present a portable SQUID system that measures the absolute magnetic flux density vector and the gradient tensor. This vector-tensor system contains 13 integrated low-critical temperature (LTc) superconducting quantum interference devices (SQUIDs) inside a small cylindrical liquid helium Dewar with a height of 31 cm and 37 cm in diameter. The achievable resolution depends on the flux density of the field under investigation and its temporal drift. Inside a seven-layer mu-metal shield, an accuracy better than ±23 pT for the components of the static magnetic field vector and ±2 pT/cm for each of the nine components of the gradient tensor is reached by using the shifting method.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

THE ACS NEARBY GALAXY SURVEY TREASURY. XI. THE REMARKABLY UNDISTURBED NGC 2403 DISK

We present detailed analysis of color-magnitude diagrams of NGC 2403, obtained from a deep (m {approx}< 28) Hubble Space Telescope (HST) Wide Field Planetary Camera 2 observation of the outer disk of NGC 2403, supplemented by several shallow (m {approx}< 26) HST Advanced Camera for Surveys fields. We derive the spatially resolved star formation history of NGC 2403 out to 11 disk scale lengths. In the inner portions of the galaxy, we compare the recent star formation rates (SFRs) we derive from the resolved stars with those measured using GALEX FUV + Spitzer 24{mu} fluxes, finding excellent agreement between the methods. Our measurements also show that the radial gradient in recent SFR mirrors the disk exponential profile to 11 scale lengths with no break, extending to SFR densities a factor of {approx}100 lower than those that can be measured with GALEX and Spitzer ({approx}2 Multiplication-Sign 10{sup -6} M{sub Sun} yr{sup -1} kpc{sup -2}). Furthermore, we find that the cumulative stellar mass of the disk was formed at similar times at all radii. We compare these characteristics of NGC 2403 to those of its ''morphological twins'', NGC 300 and M 33, showing that the structure and age distributions of the NGC 2403 disk are more similar to those of the relatively isolated system NGC 300 than to those of the Local Group analog M 33. We also discuss the environments and HI morphologies of these three nearby galaxies, comparing them to integrated light studies of larger samples of more distant galaxy disks. Taken together, the physical properties and evolutionary history of NGC 2403 suggest that the galaxy has had no close encounters with other M 81 group members and may be falling into the group for the first time.

79 ASTRONOMY AND ASTROPHYSICS↗

van der Waals bilayer energetics: Generalized stacking-fault energy of graphene, boron nitride, and graphene/boron nitride bilayers

The structure, thermodynamics, and band gaps in graphene/graphene, boron nitride/boron nitride, and graphene/boron nitride bilayers are determined using several different corrections to first-principles approaches to account for the dispersion interactions. While the density functional dispersion correction, van der Waals density functional, meta–generalized gradient approximation, and adiabatic fluctuation-dissipation theorem methods (ACFDT-RPA) all lead to qualitatively similar predictions, the best accuracy is obtained through the application of the computationally expensive ACFDT-RPA method. We present an accurate ACFDT-RPA-based method to determine bilayer structure, generalized stacking-fault energy (GSFE), and band gaps as a function of the relative translation states of the two layers. The GSFE data clearly identify all of the stable and metastable bilayer translations as well as the barriers between them. Furthermore, this is key for predicting the sliding, formation, and adhesion energies for homo- and hetero-bilayers, as well as for the determination of defects in such multilayer van der Waals systems. These, in turn, provide an accurate approach for determining and manipulating the spatial variation of electronic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First determination of ground state electromagnetic moments of Fe 53

Here, the hyperfine coupling constants of neutron deficient 53 Fe were deduced from the atomic hyperfine spectrum measured using the bunched-beam collinear laser spectroscopy technique. The low-energy 53 Fe beam was produced by projectile-fragmentation reactions followed by gas stopping, and used for the first time for laser spectroscopy. Ground state magnetic-dipole and electric-quadrupole moments were determined as μ= –0.65(1)μ N and Q=+35(15)e 2 fm 2 , respectively. The multiconfiguration Dirac-Fock method was used to calculate the electric field gradient to deduce Q from the quadrupole hyperfine coupling constant, since the quadrupole coupling constant has not been determined for any Fe isotopes. Both experimental values agree well with nuclear shell model calculations using the GXPF1A effective interaction performed in a full fp shell model space, which support the soft nature of the 56 Ni nucleus.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗