Search NASA⌕ Search

SEARCH · Search NASA

Results for “model interpretability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

The Solar Constant, Climate, and Some Tests of the Storage Hypothesis

Activity related modulation of the solar constant can have practical consequences for climate only if storage is involved, as opposed to a detailed balance between sunspot blocking and facular reemission. Four empirical tests are considered that might distinguish between these opposing interpretations: monochromatic measurements of positive and negative flux; comparison of modelled and measured irradiance variations; the interpretation of secular trends in irradiance data; and the direct test of an anticipated signal in climate records of surface air temperature. The yet unanswered question of the role of faculae as possible reemitters of blocked radiation precludes a definitive answer, although other tests suggest their role to be minor, and that storage and an 11 year modulation is implicated. A crucial test is the behavior of the secular trend in irradiance in the declining years of the present activity cycle.

Eddy, J. A.↗

Relativistic Effects and Polarization in Three High-Energy Pulsar Models

We present the influence of the special relativistic effects of aberration and light travel time delay on pulsar high-energy lightcurves and polarization characteristics predicted by three models: the two-pole caustic model, the outer gap model, and the polar cap model. Position angle curves and degree of polarization are calculated for the models and compared with the optical data on the Crab pulsar. The relative positions of peaks in gamma-ray and radio lightcurves are discussed in detail for the models. We find that the two-pole caustic model can reproduce qualitatively the optical polarization characteristics of the Crab pulsar - fast swings of the position angle and minima in polarization degree associated with both peaks. The anticorrelation between the observed flux and the polarization degree (observed in the optical band also for B0656+14) naturally results from the caustic nature of the peaks which are produced in the model due to the superposition of radiation from many different altitudes, ie. polarized at different angles. The two-pole caustic model also provides an acceptable interpretation of the main features in the Crab's radio profile. Neither the outer gap model nor the polar cap model are able to reproduce the optical polarization data on the Crab. Although the outer gap model is very successful in reproducing the relative positions of gamma-ray and radio peaks in pulse profiles, it can reproduce the high-energy lightcurves only when photon emission from regions very close to the light cylinder is included.

Dyks, J.↗

A Machine Learning Approach to Predict Martensitic Transition Temperatures for Shape Memory Alloys

Shape memory alloys (SMAs) are a unique class of materials with several remarkable properties including shape recovery, superelasticity, etc. Especially important for many NASA applications is the ability to tune the martensitic phase transition temperature by varying the alloy composition. Nickel-titanium (NiTi) based alloys are the most widely studied of this class, with compositions involving ternary, quaternary, or higher additions being considered. Over the past several years, a significant database of SMA properties has been assembled by NASA researchers. Such a database is ideal for data science-based approaches including machine learning. We present results from a developed machine learning model capable of accurately predicting the transition temperature of SMAs across a wide range of compositions. Our model has the added benefit of interpretability and even provides confidence intervals for our predictions. This model will make rapid screening and design of new SMA materials possible. Predictions from the machine learning model can be validated by empirical and/or atomistic scale modeling.

Shreyas Honrao↗

Search for new phenomena with the $M_{\mathrm {T2}}$ variable in the all-hadronic final state produced in proton–proton collisions at $\sqrt{s} = 13$ $\,\text {TeV}$

A search for new phenomena is performed using events with jets and significant transverse momentum imbalance, as inferred through the $M_{\mathrm {T2}}$ variable. The results are based on a sample of proton–proton collisions collected in 2016 at a center-of-mass energy of 13 $\,\text {TeV}$ with the CMS detector and corresponding to an integrated luminosity of 35.9 $\,\text {fb}^\text {-1}$ . No excess event yield is observed above the predicted standard model background, and the results are interpreted as exclusion limits at 95% confidence level on the masses of predicted particles in a variety of simplified models of R-parity conserving supersymmetry. Depending on the details of the model, 95% confidence level lower limits on the gluino (light-flavor squark) masses are placed up to 2025 (1550) $\,\text {GeV}$ . Mass limits as high as 1070 (1175) $\,\text {GeV}$ are set on the masses of top (bottom) squarks. Information is provided to enable re-interpretation of these results, including model-independent limits on the number of non-standard model events for a set of simplified, inclusive search regions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Generalizing the Gurson model using symbolic regression and transfer learning to relax inherent assumptions

Abstract To generate material models with fewer limiting assumptions while maintaining closed-form, interpretable solutions, we propose using genetic programming based symbolic regression (GPSR), a machine learning (ML) approach that describes data using free-form symbolic expressions. To maximize interpretability, we start from an analytical, derived material model, the Gurson model for porous ductile metals, and systematically relax inherent assumptions made in its derivation to understand each assumption’s contribution to the GPSR model forms. We incorporate transfer learning methods into the GPSR training process to increase GPSR efficiency and generate models that abide by known mechanics of the system. The results show that regularizing the GPSR fitness function is critical for generating physically valid models and illustrate how GPSR allows a high level of interpretability compared with other ML approaches. The method of systematic assumption relaxation allows the generation of models that address limiting assumptions found in the Gurson model, and the symbolic forms allow conjecture of decreased material strength due to void interaction and non-symmetric void shapes.

36 MATERIALS SCIENCE↗

Development of laser induced fluorescence diagnostic for measuring the parameters of plasma containing rare gas species

Laser induced fluorescence (LIF) technique development activity for measurement of plasma parameters in ITER divertor plasma is described. Helium density is the task of priority, but Doppler measurement of ion (atom) temperatures is also the aim of the program. The concept of ITER scenarios includes injection of ''extrinsic'' impurities (Ne, Ar, and Kr). It is possible to use the species as tracing elements for measurement of T{sub i}, T{sub a}. The program included modeling experiments on PNX-U (a multicusp trap with microwave argon plasma). Helium was added by puffing into discharge. Temperatures T{sub i}(Ar{sup 1+}) and T{sub a}(He{sup 0}) have been measured by scanning laser line across absorption line of species. Summarizing of fluorescence signals provided input data for estimation of Ar{sup 1+} and He{sup 0} densities via interpretative collisional-radiative models. Besides, the collisional-radiative model has been used for estimation of electron density using the ratio of fluorescence signals at 388.9 and 706.5 nm helium lines.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

MCP-eGridGPT (MCP-Enabled Chatbot with Electrical Power System Analysis and Interactive Visualization Tool) [SWR-25-126]

This software is an advanced chatbot system that integrates the Model Context Protocol (MCP) to provide intelligent electrical power system analysis and automated visualization generation. The system enables users to interact with complex electrical engineering tools through natural language, automatically analyzes power system data for voltage violations and grid health assessment, and generates professional interactive HTML dashboards and reports. Key features include dynamic tool discovery from MCP servers, multi-LLM provider support, intelligent data interpretation using large language models, automated chart generation, and a web-based interface for real-time analysis. The software bridges sophisticated electrical engineering analysis with user-friendly interfaces, making power system diagnostics accessible through conversational AI.

Choi, Seong [National Laboratory of the Rockies (N↗

Local gravity theories in conformal superspace

The conformal method for the initial value formulation of GR is one of the most powerful and widely usedtools in both analytical studies and numerical simulations of solutions. As is well-known, it exploits a hidden spatial conformal symmetry that can be extracted from the equations. But why conformal symmetry? Motivated by these questions and by well-known obstacles to quantum gravity, I look for the most general geometrodynamical symmetries compatible with a reduced physical configuration space for metric gravity. I argue that they are indeed spatial conformal diffeomorphisms. The next question is: what sort of theories most naturally incorporate this symmetry? Demanding locality for an action for metric gravity compatible with these principles determines the allowed operators, both for the purely gravitational part as well as matter couplings. The symmetries guarantee that there are two gravitational propagating physical degrees of freedom, but no explicit refoliation-invariance. The simplest such system has a geometric interpretation as a geodesic model in infinite-dimensional conformal superspace. One example of solution to the equations of motion corresponds to a static Bianchi IX spatial ansatz. The unique coupling to electromagnetism forces the electromagnetic equations to be hyperbolic, enabling us to “build” a standard space–time causal structure. There are, however, deviations from the standard Maxwell equations when space–time anisotropies become too large. Regarding quantization, with the geometric interpretation and the lack of refoliation invariance, the path integral treatment of the symmetries becomes much less involved than the similar approaches to GR. The symmetries form an (infinite-dimensional) Lie algebra, and no BFV treatment is necessary. Moreover, one can use gauge-invariant variational principles for selecting the boundary conditions of the path integral. We find that the propagator around the homogeneous solution has up to 6th order spatial derivatives, giving it plausible regularization properties as in Horava–Lifschitz.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Convective flow effects on protein crystal growth

A high-resolution microscopic interferometric setup for the monitoring of protein morphologies has been developed. Growth or dissolution of a crystal can be resolved with a long-term depth resolution of 200 A and a lateral resolution of 2 microns. This capability of simultaneously monitoring the interfacial displacement with high local depth resolution has yielded several novel results. We have found with lysozyme that (1) the normal growth rate is oscillatory, and (2) depending on the impurity content of the solution, the growth step density is either greater or lower at the periphery of a facet than in its center. The repartitioning of Na plus and Cl minus ions between lysozyme solutions and crystals was studied for a wide range of crystallization conditions. A nucleation-growth-repartitioning model was developed, to interpret the large body of data in unified way. The results strongly suggest that (1) the ion to lysozyne ratio in the crystal depends mostly on kinetic rather than crystallographic parameters, and (2) lysozyme crystals possess a salt-rich core with a diameter electron microscopy results appear to confirm this finding, which could have far-reaching consequences for x-ray diffraction studies. A computational model for diffusive-convective transport in protein crystallization has been applied to a realistic growth cell geometry, taking into account the findings of the above repartitioning studies and our kinetics data for the growth of lysozyme. The results show that even in the small cell employed, protein concentration nonuniformities and gravity-driven solutal convection can be significant. The calculated convection velocities are of the same order to magnitude as those found in earlier experiments. As expected, convective transport, i.e., at Og, lysozyme crystal growth remains kinetically limited. The salt distribution in the crystal is predicted to be non-uniform at both 1g and 0g, as a consequence of protein depletion in the solution. Static and dynamic light scattering studies in undersaturated and supersaturated solutions have been performed. Diffusivities in undersaturated solutions, were found to vary with lysozyme concentrations. Depending on the salt concentration, the diffusivities either increase or decrease. Interestingly, the corresponding static scattering intensities behave oppositely, Our current analysis indicates that these changes are inconsistent with aggregation in undersaturated solutions. However, the data are compatible with concentration-dependent changes of the interactions between protein and salt.

Rosenberger, Franz↗

IPRT Polarized Radiative Transfer Model Intercomparison Project-Phase A

The polarization state of electromagnetic radiation scattered by atmospheric particles such as aerosols, cloud droplets, or ice crystals contains much more information about the optical and microphysical properties than the total intensity alone. For this reason an increasing number of polarimetric observations are performed from space, from the ground and from aircraft. Polarized radiative transfer models are required to interpret and analyse these measurements and to develop retrieval algorithms exploiting polarimetric observations. In the last years a large number of new codes have been developed, mostly for specific applications. Benchmark results are available for specific cases, but not for more sophisticated scenarios including polarized surface reflection and multi-layer atmospheres. The International Polarized Radiative Transfer (IPRT) working group of the International Radiation Commission (IRC) has initiated a model intercomparison project in order to fill this gap. This paper presents the results of the first phase A of the IPRT project which includes ten test cases, from simple setups with only one layer and Rayleigh scattering to rather sophisticated setups with a cloud embedded in a standard atmosphere above an ocean surface. All scenarios in the first phase A of the intercomparison project are for a one-dimensional plane-parallel model geometry. The commonly established benchmark results are available at the IPRT website

radiative transfer↗

Global Carbon Budget 2016

Accurate assessment of anthropogenic carbon dioxide (CO2) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere the global carbon budget is important to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe data sets and methodology to quantify all major components of the global carbon budget, including their uncertainties, based on the combination of a range of data, algorithms, statistics, and model estimates and their interpretation by a broad scientific community. We discuss changes compared to previous estimates and consistency within and among components, alongside methodology and data limitations. CO2 emissions from fossil fuels and industry (EFF) are based on energy statistics and cement production data, respectively, while emissions from land-use change (ELUC), mainly deforestation, are based on combined evidence from land-cover change data, fire activity associated with deforestation, and models. The global atmospheric CO2 concentration is measured directly and its rate of growth (GATM) is computed from the annual changes in concentration. The mean ocean CO2 sink (SOCEAN) is based on observations from the 1990s, while the annual anomalies and trends are estimated with ocean models. The variability in SOCEAN is evaluated with data products based on surveys of ocean CO2 measurements. The global residual terrestrial CO2 sink (SLAND) is estimated by the difference of the other terms of the global carbon budget and compared to results of independent dynamic global vegetation models. We compare the mean land and ocean fluxes and their variability to estimates from three atmospheric inverse methods for three broad latitude bands. All uncertainties are reported as +/- 1(sigma), reflecting the current capacity to characterize the annual estimates of each component of the global carbon budget. For the last decade available (2006-2015), EFF was 9.3+/-0.5 GtC/yr, ELUC 1.0+/-0.5 GtC/yr,GATM 4.5+/-0.1 GtC/yr, SOCEAN 2.6+/-0.5 GtC/yr, and SLAND 3.1+/-0.9 GtC/yr. For year 2015 alone, the growth in EFF was approximately zero and emissions remained at 9.9+/-0.5 GtC/yr, showing a slowdown in growth of these emissions compared to the average growth of 1.8/yr that took place during 2006-2015.Also, for 2015, ELUC was 1.3+/-0.5 GtC/yr, GATM was 6.3+/-0.2 GtC/yr, SOCEAN was 3.0+/-0.5 GtC/yr, and SLAND was 1.9+/-0.9 GtC/yr. GATM was higher in 2015 compared to the past decade (2006-2015), reflecting a smaller SLAND for that year. The global atmospheric CO2 concentration reached 399.4+/-0.1 ppm averaged over 2015. For 2016, preliminary data indicate the continuation of low growth in EFF with +0.2% (range of -1.0 to +1.8% ) based on national emissions projections for China and USA, and projections of gross domestic product corrected for recent changes in the carbon intensity of the economy for the rest of the world. In spite of the low growth of EFF in 2016, the growth rate in atmospheric CO2 concentration is expected to be relatively high because of the persistence of the smaller residual terrestrial sink (SLAND) in response to El Nino conditions of 2015-2016. From this projection of EFF and assumed constant ELUC for 2016, cumulative emissions of CO2 will reach 565+/-55 GtC (2075+/-205 GtCO2) for 1870-2016, about 75% from EFF and 25% from ELUC. This living data update documents changes in the methods and data sets used in this new carbon budget compared with previous publications of this data set.

Quéré, Corinne Le↗

Electron–Nuclear Dynamics Accompanying Proton-Coupled Electron Transfer

Although photoinduced proton-coupled electron transfer (PCET) plays an essential role in photosynthesis, a full understanding of the mechanism is still lacking due to the complex nonequilibrium dynamics arising from the strongly coupled electronic and nuclear degrees of freedom. Here we report the photoinduced PCET dynamics of a biomimetic model system investigated by means of transient IR and two-dimensional electronic–vibrational (2DEV) spectroscopies, IR spectroelectrochemistry (IRSEC), and calculations utilizing long-range-corrected hybrid density functionals. This collective experimental and theoretical effort provides a nuanced picture of the complicated dynamics and synergistic motions involved in photoinduced PCET. In particular, the evolution of the 2DEV line shape, which is highly sensitive to the mixing of vibronic states, is interpreted by accurate computational modeling of the charge separated state and is shown to represent a gradual change in electron density distribution associated with a dihedral twist that occurs on a 120 fs time scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Data-Driven Kinetic Reaction Networks for Separation Chemistry

Understanding complex, multistep chemical reactions at the molecular level is a major challenge whose solution would greatly benefit the design and optimization of numerous chemical processes. The separation of rare-earth (4f) and actinide (5f) elements is an example where improving our chemical understanding is important for designing and optimizing new chemistries, even with a limited number of observations. Here, in this work, we leverage data-driven artificial intelligence and machine-learning approaches to develop kinetic reaction networks that describe the liquid–liquid extraction mechanism of uranium using N,N-di-2-ethylhexyl-isobutyramide (DEHiBA). Specifically, we compare and contrast the properties of two classes of models: (1) purely data-driven models that are regularized using chemistry-agnostic, L1 regression and (2) chemistry-informed models that are regularized using relative reaction energies provided by quantum mechanical calculations. We observe that purely data-driven models are unbiased, simple, and accurate in their predictions of experimental measurements when provided with sufficient data but are difficult to fully constrain and interpret. In contrast, chemistry-informed models exhibit significantly improved chemical interpretability and consistency, providing a detailed description of the separation process while achieving high accuracy through ensemble averaging. Overall, the dominant species predicted to be extracted into the organic phase is UO 2 (NO 3 ) 2 (DEHiBA) 2 , agreeing with experimental slope analysis, thermodynamic modeling, EXAFS, and crystal structures. This work demonstrates that leveraging the fundamental structure of the problem can lead to efficient learning schemes that provide both accurate predictions and chemical insights at a low computational cost.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Global Carbon Budget 2016

Accurate assessment of anthropogenic carbon dioxide (CO 2 ) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere – the “global carbon budget” – is important to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe data sets and methodology to quantify all major components of the global carbon budget, including their uncertainties, based on the combination of a range of data, algorithms, statistics, and model estimates and their interpretation by a broad scientific community. We discuss changes compared to previous estimates and consistency within and among components, alongside methodology and data limitations. CO 2 emissions from fossil fuels and industry ( E FF ) are based on energy statistics and cement production data, respectively, while emissions from land-use change ( E LUC ), mainly deforestation, are based on combined evidence from land-cover change data, fire activity associated with deforestation, and models. The global atmospheric CO 2 concentration is measured directly and its rate of growth ( G ATM ) is computed from the annual changes in concentration. The mean ocean CO 2 sink ( S OCEAN ) is based on observations from the 1990s, while the annual anomalies and trends are estimated with ocean models. The variability in S OCEAN is evaluated with data products based on surveys of ocean CO 2 measurements. The global residual terrestrial CO 2 sink ( S LAND ) is estimated by the difference of the other terms of the global carbon budget and compared to results of independent dynamic global vegetation models. We compare the mean land and ocean fluxes and their variability to estimates from three atmospheric inverse methods for three broad latitude bands. All uncertainties are reported as ±1 σ , reflecting the current capacity to characterise the annual estimates of each component of the global carbon budget. For the last decade available (2006–2015), E FF was 9.3 ± 0.5 GtC yr -1 , E LUC 1.0 ± 0.5 GtC yr -1 , G ATM 4.5 ± 0.1 GtC yr -1 , S OCEAN 2.6 ± 0.5 GtC yr -1 , and S LAND 3.1 ± 0.9 GtC yr -1 . For year 2015 alone, the growth in E FF was approximately zero and emissions remained at 9.9 ± 0.5 GtC yr -1 , showing a slowdown in growth of these emissions compared to the average growth of 1.8 % yr -1 that took place during 2006–2015. Also, for 2015, E LUC was 1.3 ± 0.5 GtC yr -1 , G ATM was 6.3 ± 0.2 GtC yr -1 , S OCEAN was 3.0 ± 0.5 GtC yr -1 , and S LAND was 1.9 ± 0.9 GtC yr -1 . G ATM was higher in 2015 compared to the past decade (2006–2015), reflecting a smaller S LAND for that year. The global atmospheric CO 2 concentration reached 399.4 ± 0.1 ppm averaged over 2015. For 2016, preliminary data indicate the continuation of low growth in E FF with +0.2 % (range of -1.0 to +1.8 %) based on national emissions projections for China and USA, and projections of gross domestic product corrected for recent changes in the carbon intensity of the economy for the rest of the world. In spite of the low growth of E FF in 2016, the growth rate in atmospheric CO 2 concentration is expected to be relatively high because of the persistence of the smaller residual terrestrial sink ( S LAND ) in response to El Niño conditions of 2015–2016. From this projection of E FF and assumed constant E LUC for 2016, cumulative emissions of CO 2 will reach 565 ± 55 GtC (2075 ± 205 GtCO 2 ) for 1870–2016, about 75 % from E FF and 25 % from E LUC . This living data update documents changes in the methods and data sets used in this new carbon budget compared with previous publications of this data set (Le Quéré et al., 2015b, a, 2014, 2013). All observations presented here can be downloaded from the Carbon Dioxide Information Analysis Center ( doi:10.3334/CDIAC/GCP_2016 ).

54 ENVIRONMENTAL SCIENCES↗

ON THE INTERPRETATION OF ECHELLE DIAGRAMS FOR SOLAR-LIKE OSCILLATIONS EFFECT OF CENTRIFUGAL DISTORTION

This work aims at determining the impact of slow to moderate rotation on the regular patterns often present in solar-like oscillation spectra, i.e., the frequency spacings. We focus on the well-known asteroseismic diagnostic echelle diagrams, examining how rotation may modify the estimates of the large and small spacings, as well as the identification of modes. We illustrate the work with a real case: the solar-like star {eta}Bootis. We study a main-sequence 1.3 M{sub sun} star as a typical case. The modeling takes into account rotation effects on the equilibrium models through an effective gravity and on the oscillation frequencies through both perturbative and non-perturbative calculations. We compare the results of both type of calculations in the context of the regular spacings (like the small spacings and the scaled small spacings) and echelle diagrams. We show that for echelle diagrams the perturbative approach remains valid for rotational velocities up to 40-50 km s{sup -1}. We show that for the rotational velocities measured in solar-like stars, i.e., vsin i up to 20-30 km s{sup -1}, rotation effects must be taken into account in the modeling for a correct interpretation of the observed oscillations. In particular, theoretical oscillation frequencies must be corrected up to the second order in terms of rotation rate, including near degeneracy effects. For rotational velocities of about 16 km s{sup -1} and higher, diagnostics on large spacings and on modal identification through echelle diagrams can be significantly altered by the presence of the m {ne} 0 components of the rotationally split modes. We found these effects to be detectable in the observed frequency range. Analysis of the effects of rotation on small spacings and scaled small spacings reveals that these can be of the order of or even larger than surface effects, typically turbulence, microscopic diffusion, etc. Furthermore, we show that scaled spacings are significantly affected by stellar distortion even for small stellar rotational velocities (from 10 to 15 km s{sup -1}) and therefore some care must be taken when using them as indicators for probing deep stellar interiors.

79 ASTRONOMY AND ASTROPHYSICS↗

Global carbon budget 2014

Accurate assessment of anthropogenic carbon dioxide (CO 2 ) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere is important to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe data sets and a methodology to quantify all major components of the global carbon budget, including their uncertainties, based on the combination of a range of data, algorithms, statistics, and model estimates and their interpretation by a broad scientific community. We discuss changes compared to previous estimates, consistency within and among components, alongside methodology and data limitations. CO 2 emissions from fossil fuel combustion and cement production ( E FF ) are based on energy statistics and cement production data, respectively, while emissions from land-use change ( E LUC ), mainly deforestation, are based on combined evidence from land-cover-change data, fire activity associated with deforestation, and models. The global atmospheric CO 2 concentration is measured directly and its rate of growth ( G ATM ) is computed from the annual changes in concentration. The mean ocean CO 2 sink ( S OCEAN ) is based on observations from the 1990s, while the annual anomalies and trends are estimated with ocean models. The variability in S OCEAN is evaluated with data products based on surveys of ocean CO 2 measurements. The global residual terrestrial CO 2 sink ( S LAND ) is estimated by the difference of the other terms of the global carbon budget and compared to results of independent dynamic global vegetation models forced by observed climate, CO 2 , and land-cover-change (some including nitrogen–carbon interactions). We compare the mean land and ocean fluxes and their variability to estimates from three atmospheric inverse methods for three broad latitude bands. All uncertainties are reported as ±1σ;, reflecting the current capacity to characterise the annual estimates of each component of the global carbon budget. For the last decade available (2004–2013), E FF was 8.9 ± 0.4 GtC yr⁻¹, E LUC 0.9 ± 0.5 GtC yr⁻¹, G ATM 4.3 ± 0.1 GtC yr⁻¹, S OCEAN 2.6 ± 0.5 GtC yr⁻¹, and S LAND 2.9 ± 0.8 GtC yr⁻¹. For year 2013 alone, E FF grew to 9.9 ± 0.5 GtC yr⁻¹, 2.3% above 2012, continuing the growth trend in these emissions, E LUC was 0.9 ± 0.5 GtC yr⁻¹, G ATM was 5.4 ± 0.2 GtC yr⁻¹, S OCEAN was 2.9 ± 0.5 GtC yr⁻¹, and S LAND was 2.5 ± 0.9 GtC yr⁻¹. G ATM was high in 2013, reflecting a steady increase in E FF and smaller and opposite changes between S OCEAN and S LAND compared to the past decade (2004–2013). The global atmospheric CO 2 concentration reached 395.31 ± 0.10 ppm averaged over 2013. We estimate that E FF will increase by 2.5% (1.3–3.5%) to 10.1 ± 0.6 GtC in 2014 (37.0 ± 2.2 GtCO 2 yr⁻¹), 65% above emissions in 1990, based on projections of world gross domestic product and recent changes in the carbon intensity of the global economy. From this projection of E FF and assumed constant E LUC for 2014, cumulative emissions of CO 2 will reach about 545 ± 55 GtC (2000 ± 200 GtCO 2 ) for 1870–2014, about 75% from E FF and 25% from E LUC . This paper documents changes in the methods and data sets used in this new carbon budget compared with previous publications of this living data set (Le Quéré et al., 2013, 2014). All observations presented here can be downloaded from the Carbon Dioxide Information Analysis Center ( doi:10.3334/CDIAC/GCP_2014 ).

54 ENVIRONMENTAL SCIENCES↗

Global Carbon Budget 2015

Accurate assessment of anthropogenic carbon dioxide (CO 2 ) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere is important to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe data sets and a methodology to quantify all major components of the global carbon budget, including their uncertainties, based on the combination of a range of data, algorithms, statistics, and model estimates and their interpretation by a broad scientific community. We also discuss changes compared to previous estimates as well as consistency within and among components, alongside methodology and data limitations. CO 2 emissions from fossil fuels and industry ( E FF ) are based on energy statistics and cement production data, while emissions from land-use change ( E LUC ), mainly deforestation, are based on combined evidence from land-cover-change data, fire activity associated with deforestation, and models. The global atmospheric CO 2 concentration is measured directly and its rate of growth ( G ATM ) is computed from the annual changes in concentration. Moreover, the mean ocean CO 2 sink ( S OCEAN ) is based on observations from the 1990s, while the annual anomalies and trends are estimated with ocean models. The variability in S OCEAN is evaluated with data products based on surveys of ocean CO 2 measurements. The global residual terrestrial CO 2 sink ( S LAND ) is estimated by the difference of the other terms of the global carbon budget and compared to results of independent dynamic global vegetation models forced by observed climate, CO 2 , and land-cover change (some including nitrogen–carbon interactions). We compare the mean land and ocean fluxes and their variability to estimates from three atmospheric inverse methods for three broad latitude bands. All uncertainties are reported as ±1σ, reflecting the current capacity to characterise the annual estimates of each component of the global carbon budget. For the last decade available (2005–2014), E FF was 9.0 ± 0.5 GtC yr -1 , E LUC was 0.9 ± 0.5 GtC yr -1 , G ATM was 4.4 ± 0.1 GtC yr -1 , S OCEAN was 2.6 ± 0.5 GtC yr -1 , and S LAND was 3.0 ± 0.8 GtC yr -1 . For the year 2014 alone, E FF grew to 9.8 ± 0.5 GtC yr -1 , 0.6 % above 2013, continuing the growth trend in these emissions, albeit at a slower rate compared to the average growth of 2.2 % yr -1 that took place during 2005–2014. Also, for 2014, E LUC was 1.1 ± 0.5 GtC yr -1 , G ATM was 3.9 ± 0.2 GtC yr -1 , S OCEAN was 2.9 ± 0.5 GtC yr -1 , and S LAND was 4.1 ± 0.9 GtC yr -1 . G ATM was lower in 2014 compared to the past decade (2005–2014), reflecting a larger S LAND for that year. The global atmospheric CO 2 concentration reached 397.15 ± 0.10 ppm averaged over 2014. For 2015, preliminary data indicate that the growth in E FF will be near or slightly below zero, with a projection of -0.6 [range of -1.6 to +0.5] %, based on national emissions projections for China and the USA, and projections of gross domestic product corrected for recent changes in the carbon intensity of the global economy for the rest of the world. From this projection of E FF and assumed constant E LUC for 2015, cumulative emissions of CO 2 will reach about 555 ± 55 GtC (2035 ± 205 GtCO 2 ) for 1870–2015, about 75 % from E FF and 25 % from E LUC . Finally, this living data update documents changes in the methods and data sets used in this new carbon budget compared with previous publications of this data set (Le Quéré et al., 2015, 2014, 2013). All observations presented here can be downloaded from the Carbon Dioxide Information Analysis Center ( doi:10.3334/CDIAC/GCP_2015 ).

54 ENVIRONMENTAL SCIENCES↗

Thermodynamic Model for ThO 2 (am) Solubility in Isosaccharinate Solutions

Extensive studies on ThO 2 (am) solubility were carried out as functions of a wide range of isosaccharinate concentrations (0.0002 to 0.2 mol·kg -1 ) at fixed pH values of about 6 and 12, and varying pH (ranging from 4.5 to 12) at fixed aqueous isosaccharinate concentrations of 0.008 mol·kg -1 or 0.08 mol·kg -1 , to determine the aqueous complexes of isosaccharinate with Th(IV). The samples were equilibrated over periods ranging up to 69 days, and the data showed that, in most cases, steady-state concentrations were reached in <15 days. The data were interpreted using the SIT model, and required the inclusion of mixed hydroxy-ISA complexes of Th(IV) [Th(OH)ISA 2+ , Th(OH) 3 (ISA) - 2 , and Th(OH) 4 (ISA) 2 -2 ] with log10K0 = 12.5± 0.5, 4.4±0.5 and -3.2±0.5 for the reactions: ThO 2 (am)+ 3H + +ISA - *Th(OH)ISA 2+ + H 2 O ThO 2 (am)+ H+ +2ISA - +H2O*Th(OH) 3 (ISA) -2 and ThO 2 (am)+ 2ISA - +2H 2 O*Th(OH) 4 (ISA) 2 -2 respectively. Predictions based on these Th-ISA complexes agreed closely with the extensive experimental data developed in this study as well as the very limited (only at pH = 8.3) data from liquid-liquid extractions recently reported in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗