Search NASA⌕ Search

SEARCH · Search NASA

Results for “performance study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Performance analysis of boron nitride embedded armchair graphene nanoribbon metal–oxide–semiconductor field effect transistor with Stone Wales defects

We study the performance of a hybrid Graphene-Boron Nitride armchair nanoribbon (a-GNR-BN) n-MOSFET at its ballistic transport limit. We consider three geometric configurations 3p, 3p + 1, and 3p + 2 of a-GNR-BN with BN atoms embedded on either side (2, 4, and 6 BN) on the GNR. Material properties like band gap, effective mass, and density of states of these H-passivated structures are evaluated using the Density Functional Theory. Using these material parameters, self-consistent Poisson-Schrodinger simulations are carried out under the Non Equilibrium Green's Function formalism to calculate the ballistic n-MOSFET device characteristics. For a hybrid nanoribbon of width ∼5 nm, the simulated ON current is found to be in the range of 265 μA–280 μA with an ON/OFF ratio 7.1 × 10{sup 6}–7.4 × 10{sup 6} for a V{sub DD} = 0.68 V corresponding to 10 nm technology node. We further study the impact of randomly distributed Stone Wales (SW) defects in these hybrid structures and only 2.5% degradation of ON current is observed for SW defect density of 3.18%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Construction of a quartz spherical analyzer: application to high-resolution analysis of the Ni K α emission spectrum

The construction and characterization of a focusing X-ray spherical analyzer based on α-quartz 4$\bar{4}$04 are presented. The performance of the analyzer was demonstrated by applying it to a high-resolution X-ray spectroscopy study of the K α 1,2 emission spectrum of Ni. An analytical representation based on physical grounds was assumed to model the shape of the X-ray emission lines. Satellite structures assigned to 3 d spectator hole transitions were resolved and determined as well as their relative contribution to the emission spectrum. The present results on 1 s -1 3 d -1 shake probabilities support a recently proposed calculation framework based on a multi-configuration atomic model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dependency of optical/UV parameters on X-ray spectral index in AGNs

The study of Active Galactic Nuclei (AGNs) is vital in order to understand their respective nuclei bounded activity primarily triggered by the accretion disk and the associated corona. The hard X-ray emission characterised by the spectral index Γ emitted by these sources in 2-10 keV band ionizes the nearby physical features like disk, BLR, NLR and provides a radiative configuration. However, based on previous studies, there is degeneracy in the evolution of Γ across the redshift, wherein few studies display a systematic trend in the evolution and others rule out the systematic variation. Here, in the present work, we study the evolution of Γ across the redshift for a very large sample and perform further studies on the variation of Γ with optical parameters using SDSS data viz. H β & Mg II and their luminosities. Based on analysis we find that there is no change in Γ across the redshift and it does not show any correlation with the optical parameters. This strongly suggests that the Γ is influenced by the soft excess and/or reflection component and is affecting the disk and BLR region at the same strength across the redshift.

79 ASTRONOMY AND ASTROPHYSICS↗

Periodic Density Functional Theory Study of Water Adsorption on the a-Quartz (101) Surface.

Plane wave density functional theory (DFT) calculations have been performed to study the atomic structure, preferred H2O adsorption sites, adsorption energies, and vibrational frequencies for water adsorption on the R-quartz (101) surface. Surface energies and atomic displacements on the vacuum-reconstructed, hydrolyzed, and solvated surfaces have been calculated and compared with available experimental and theoretical data. By considering different initial positions of H2O molecules, the most stable structures of water adsorption at different coverages have been determined. Calculated H2O adsorption energies are in the range -55 to -65 kJ/mol, consistent with experimental data. The lowest and the highest O-H stretching vibrational bands may be attributed to different states of silanol groups on the watercovered surface. The dissociation energy of the silanol group on the surface covered by the adsorption monolayer is estimated to be 80 kJ/mol. The metastable states for the protonated surface bridging O atoms (Obr), which may lead to hydrolysis of siloxane bonds, have been investigated. The calculated formation energy of a Q2 center from a Q3 center on the (101) surface with 2/3 dense monolayer coverage is equal to 70 kJ/mol which is in the range of experimental activation energies for quartz dissolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From Allergens to Battery Anodes: Nature-Inspired, Pollen Derived Carbon Architectures for Room- and Elevated- Temperature Li-ion Storage

The conversion of allergic pollen grains into carbon microstructures was carried out through a facile, one-step, solid-state pyrolysis process in an inert atmosphere. The as-prepared carbonaceous particles were further air activated at 300 °C and then evaluated as lithium ion battery anodes at room (25 °C) and elevated (50 °C) temperatures. The distinct morphologies of bee pollens and cattail pollens are resembled on the final architecture of produced carbons. Scanning Electron Microscopy images shows that activated bee pollen carbon (ABP) is comprised of spiky, brain-like and tiny spheres; while activated cattail pollen carbon (ACP) resembles deflated spheres. Structural analysis through X-ray diffraction and Raman spectroscopy confirmed their amorphous nature. X-ray photoelectron spectroscopy analysis of ABP and ACP confirmed that both samples contain high levels of oxygen and small amount of nitrogen contents. At C/10 rate, ACP electrode delivered high specific lithium storage reversible capacities (590 mAh/g at 50 °C and 382 mAh/g at 25 °C) and also exhibited excellent high rate capabilities. Through electrochemical impedance spectroscopy studies, improved performance of ACP is attributed to its lower charge transfer resistance than ABP. Current studies demonstrate that morphologically distinct renewable pollens could produce carbon architectures for anode applications in energy storage devices.

25 ENERGY STORAGE↗

A System Identification and Change Detection Methodology for Stochastic Nonlinear Dynamic Systems

In this paper a component-level detection methodology for system identification and change detection is discussed. The methodology is based on non-parametric, data-driven, stochastic system identification classifications using statistical pattern recognition techniques. In order to validate the methodology discussed in this paper an experimental study was performed using a complex nonlinear magneto-rheological (MR) damper. The results of this study show that the proposed methodology is very promising to detect interpret changes in critical structural components such as nonlinear springs joints as well as various types of dampers.

58 GEOSCIENCES↗

A first principle study of the pressure dependent elastic properties of monazite LaPO{sub 4}

DFT based ab-initio simulations have been performed to study the effect of pressure on the elastic properties of monazite LaPO{sub 4} which is a promising host material for immobilization of high level nuclear waste. The phase is found to be stable up to 30 GPa. The calculated polycrystalline bulk, shear and Young moduli show an increasing trend as a function of pressure. The ductility and anisotropy in shear modulus of the material have been found to increase with pressure; whilethe bulk modulus anisotropy decreases with pressure.

36 MATERIALS SCIENCE↗

Observation of two-photon photoemission from cesium telluride photocathodes excited by a near-infrared laser

We explore nonlinear photoemission in cesium telluride (Cs$_2$Te) photocathodes where an ultrashort ($\sim 100$ fs full width at half max) 800-nm infrared laser is used as the drive-laser in lieu of the typical $\sim 266$-nm ultraviolet laser. An important figure of merit for photocathodes, the quantum efficiency, we define here for nonlinear photoemission processes in order to compare with linear photoemission. The charge against drive-laser (infrared) energy is studied for different laser energy and intensity values and cross-compared with previously performed similar studies on copper [P. Musumeci et al., \emph{Phys. Rev. Lett.}, \textbf{104}, 084801 (2010)], a metallic photocathode. We particularly observe two-photon photoemission in Cs$_2$Te using the infrared laser in contrast to the anticipated three-photon process as observed for metallic photocathodes.

43 PARTICLE ACCELERATORS↗

Three-body decay of {sup 6}Be

Three-body correlations for the ground-state decay of the lightest two-proton emitter {sup 6}Be are studied both theoretically and experimentally. Theoretical studies are performed in a three-body hyperspherical-harmonics cluster model. In the experimental studies, the ground state of {sup 6}Be was formed following the {alpha} decay of a {sup 10}C beam inelastically excited through interactions with Be and C targets. Excellent agreement between theory and experiment is obtained demonstrating the existence of complicated correlation patterns that can elucidate the structure of {sup 6}Be and, possibly, of the A=6 isobars.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Examination of Semi-Analytical Solution Methods in the Coarse Operator of Parareal Algorithm for Power System Simulation

With continuing advances in high-performance parallel computing platforms, parallel algorithms have become powerful tools for development of faster than real-time power system dynamic simulations. In particular, it has been demonstrated in recent years that parallel-in-time (Parareal) algorithms have the potential to achieve such an ambitious goal. Here, the selection of a fast and reasonably accurate coarse operator of the Parareal algorithm is crucial for its effective utilization and performance. This paper examines semi-analytical solution (SAS) methods as the coarse operators of the Parareal algorithm and explores performance of the SAS methods to the standard numerical time integration methods. Two promising time-power series-based SAS methods were considered; Adomian decomposition method and Homotopy analysis method with a windowing approach for improving the convergence. Numerical performance case studies on 10-generator 39-bus system and 327-generator 2383-bus system were performed for these coarse operators over different disturbances, evaluating the number of Parareal iterations, computational time, and stability of convergence. All the coarse operators tested with different scenarios have converged to the same corresponding true solution (if they are convergent) and the SAS methods provide comparable computational speed, while having more stable convergence to the true solution in many cases.

97 MATHEMATICS AND COMPUTING↗

Passive acoustic leak detection for sodium cooled fast reactors using hidden Markov models

Acoustic leak detection for steam generators of sodium fast reactors have been an active research topic since the early 1970's and several methods have been tested over the years. Inspired by its success in the field of automatic speech recognition, we here apply hidden Markov models (HMM) in combination with Gaussian mixture models (GMM) to the problem. To achieve this, we propose a new feature calculation scheme, based on the temporal evolution of the power spectral density (PSD) of the signal. Using acoustic signals recorded during steam/water injection experiments done at the Indira Gandhi Centre for Atomic Research (IGCAR), the proposed method is tested. We perform parametric studies on the HMM+GMM model size and demonstrate that the proposed method a) performs well without a priori knowledge of injection noise, b) can incorporate several noise models and c) has an output distribution that simplifies false alarm rate control. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Photoionization of seeded combustion products as a method of enhancing the efficiency of magnetohydrodynamic power generators

Here, in this study, we performed an experimental and computational investigation into the feasibility of utilizing photoionization to enhance the electrical conductivity of seeded oxy-fuel combustion products and improve the performance of magnetohydrodynamic (MHD) power generators. We applied a variety of optical and microwave diagnostics to study the ionization and recombination processes of potassium excited by an excimer laser in a high-velocity oxy-fuel free jet. Computational fluid dynamic (CFD) simulations were performed to model the thermophysical properties and species densities of the free jet. The CFD results were validated with position-dependent potassium concentration measurements. Electron recombination exponential lifetimes were measured through time-resolved microwave transmission. The experimental electron lifetimes were compared with lifetimes calculated from CFD-predicted species densities and literature recombination rates. It was determined that K + or O 2 are the most likely recombination partners for photoionized electrons. Time-resolved fluorescence measurements provided evidence of an ionization pathway involving a two-photon ionization of KOH . Finally, a zero-dimensional chemical kinetic model was developed to assess the fundamental viability of inducing a non-equilibrium electron population to provide a net energy return in combustion-driven MHD power generators. We determined that a high energy return is feasible for targeting electrode boundary layers with ultraviolet photoionization. We also found that photoionization could potentially lower the required temperature of the bulk gas flow.

20 FOSSIL-FUELED POWER PLANTS↗

The MELCOR Analysis of Chinshan Nuclear Power Plant Spent Fuel Pool for Fukushima-like Accident

The safety analysis of the nuclear power plant (NPP) is very important work in the NPP safety. Especially after the Fukushima NPP accident occurred, the importance of NPP safety analysis has been raised and there is more concern for the safety of NPPs in Taiwan. Because the earthquake and tsunami occurred, the cooling system of spent fuel pool failed and the safety issue of spent fuel pool generated in Japan's Fukushima NPP. Chinshan NPP is the first NPP in Taiwan which is BWR/4 plant and OLTP (Original Licensed Thermal Power) for each unit is 1775 MWt. Chinshan NPP finished SPU (stretch power uprate) and the operating power is 103.66% of the OLTP, which is 1840 MWt now. After Fukushima NPP accident occurred, in order to concern the safety of Chinshan NPP spent fuel pool, we performed the safety analysis of spent fuel pool by using MELCOR/SNAP which also assumed the cooling system of spent fuel pool failed. The geometry of Chinshan NPP spent fuel pool is 12.17 m x 7.87 m x 11.61 m and the initial condition is 60 deg. (water temperature) / 1.013 x 10{sup 5} Pa. And, the total power of the fuels is roughly 8.9 MWt initially. MELCOR is developed by Sandia National Laboratories. MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor NPPs, including containment response and leakage of activity to the environment. A broad spectrum of severe accident phenomena in both BWRs and PWRs is treated in MELCOR in a unified framework. These include thermalhydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. According to Dr. Carbajo's paper, MELCOR was used to perform the study of spent fuel pool of Fukushima Daiichi Unit 4. Niina E. Koenoenen used MELCOR to establish the spent fuel pool model of a Nordic BWR. The loss-of-pool-cooling accidents was simulated and analyzed by this model. The above studies indicate that MELCOR is capable of handling the simulation of the spent fuel pool. An increasing number of researchers are using MELCOR code to analyze test facilities and nuclear power plants. Jun Wang et al. used MELCOR to perform core degradation simulation and MELCOR results were compared with CORA experimental data. Through this work, they reviewed the performance of MELCOR COR package in detail. Tae Woon Kim et al. developed MELCOR model of APR1400 (an advanced pressurized water reactor). They used this model to perform the LBLOCA transient simulation and sensitivity study. Longze Li et al. established the MELCOR model of CPR1000 (a Chinese pressurized reactor 1000-MW power plant). The station blackout (SBO) with failure of the steam generator (SG) safety relief valve (SRV) transient was simulated and analyzed by this model. SNAP is a graphic user interface program that processes the inputs and outputs of MELCOR. In addition, there is an animation function in SNAP which can present the animation of analysis results. There are two main steps in this research. The first step was the establishment of Chinshan NPP spent fuel pool MELCOR/SNAP model. And the transient analysis of Chinshan NPP spent fuel pool MELCOR/SNAP model under the cooling system failure condition was performed. The next step was the comparison among the MELCOR, TRACE and CFD data. TRACE and CFD data were from INER reports. In addition, the animation model of Chinshan NPP spent fuel pool was presented by using the animation function of SNAP with MELCOR/SNAP analysis results. This study has developed MELCOR/SNAP model of Chinshan NPP spent fuel pool successfully. By using the above model, the safety analysis of the spent fuel pool was performed under the cooling system of spent fuel pool failed condition. The analysis results of MELCOR, TRACE and CFD were similar in this case. It indicated that there was a respectable accuracy in MELCOR/SNAP model. The analysis results depicted that the uncovered of the fuels occurred at 2.6 day and the metal-water reaction of fuels occurred roughly at 3.7 day after the cooling system failed. The above results indicated that the failure of cladding occurred after 3.7 day. This study's results can help to evaluate the safety issue of Chinshan NPP spent fuel pool. In addition, the cooling system and some mitigation measures of spent fuel pool is not simulated in the above model. However, we will do it in the future. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DICER: Data Intensive Computing Environment and Runtime for Evaluating Unprecedented Scale of Geospatial-Temporal Human Mobility Data

With the significant increase in sources and volume of human mobility data through commercial data vendors as well as microsimulation of cities, the scale of geospatial-temporal data to analyze and assess for mobility characterization has grown to the level of Big Data. There are mobility related commercial organizations deploying scalable computing, but often the system architecture, workflow, and intermediate processing components are not fully disclosed in relevant scope. Current research literature has a notable lack of studies demonstrating architectures and workflows for human mobility analytics that are implemented on a TeraByte scale of geospatial-temporal data. In this context, this paper presents a hyperscale-level system solution named DICER (Data Intensive Computing Environment and Runtime) for processing and analytics of geospatial-temporal data at big data scale. Although the cluster computing architecture of DICER with Apache Spark job running on Kubernetes cluster is not new, there are innovations in the workflow, hierarchical processing logic, and a wide range of intermediate preprocessing and mobility metrics calculation. We have performed case studies to validate the effectiveness of DICER system solution by performing detailed analytics and assessment of human mobility microsimulation output at three different scopes and scale, including a usecase with 16.97 TeraByte and 259.2 Billion rows of data. In addition, we have presented another case study of utilizing DICER to perform the same mobility processing and comparative analytics on large-scale commercially available geospatial-temporal data. All these case studies validate the efficiency and usefulness of DICER in computing population mobility characteristics from geospatial-temporal trajectory data at an unprecedented scale (not only just data volume, but also combination of: number of user entities, temporal frequency, spatial resolution, data duration).

De, Debraj↗

The effect of lighting environment on task performance in buildings – A review

The effects of indoor environmental conditions on human health, satisfaction, and performance have been the focal point of research for decades. This paper reviews and summarizes the impact of lighting environment on task performance, specifically for the built environment audience. Existing studies included a variety of performance tests on cognitive performance and perception, visual acuity and reaction, memory, reasoning, and labor productivity. Illuminance, luminance ratio and correlated color temperature were found to affect performance in different ways, reflecting the impact of experimental techniques, conditions, performance evaluation methods used and data analysis methods. These were reviewed and categorized, with discussion on limitations related to sample size, modeling approach, carryover effects and other factors affecting individual differences in performance, with recommendations for future improvement. Although no universal conclusions can be made, in general, task performance seems to improve with higher illuminances, contrast ratios in the range of 7–11:1 (while always making sure that glare will not occur in the space) and higher correlated color temperature, while spectral tuning in the red or blue wavelengths has also shown positive effects. To obtain more generic evidence, future studies should be more consistent in terms of experimental procedures and overall light conditions, and also consider the effects of vertical illuminance, daylight provision/control, and outside views on task performance. Finally, studying performance with multi-factorial designs in a human-centered optimized manner (such as deploying variable lighting scenarios optimized for various tasks) can lead to deeper understanding of lighting effects on task performance, and ultimately to improved lighting design and operation in buildings overall.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Nickel doped graphitic carbon nitride nanosheets and its application for dye degradation by chemical catalysis

Highlights: • Nickel doped Graphitic carbon nitride (GCN) was synthesized chemically. • Mott-Schottky was done to calculate the flat band potentials and donor densities of pure and doped samples. • Toxic Methyl Orange dye was degraded efficiently by doped samples in the presence of NaBH{sub 4} accompanied by hydrogen evolution. • Enhancement of catalytic activity with increasing doping concentration was studied in presence of varying amount of NaBH{sub 4}. • A plausible mechanism for catalytic degradation was discussed in details. - Abstract: A facile synthesis of transition metal-nickel doped graphitic carbon nitride (NiGCN) nanosheets with varying doping concentrations has been reported. X-Ray diffraction and Fourier transformed infrared spectroscopic study were performed to analyse the structural phase formation and different bonds present in the samples, whereas, field emission and transmission electron microscopic study provided the morphological information. The thermal stability of the samples was measured from the TG-DTA analysis. Photoluminescence spectroscopy was performed to elucidate the emissive property of the samples. The flat band potential of the samples was measured by Mott-Schottky analysis. First principle study was carried out to delineate the probable doping site of the Ni atom along with the effect of doping on the pure material. The samples were effectively utilized to degrade toxic methyl orange (MO) dye from water in the presence of sodium borohydride (NaBH{sub 4}) without exploiting any visible light source. The plausible catalysis mechanism following a series of several chemical reactions has been discussed in details.

77 NANOSCIENCE AND NANOTECHNOLOGY↗