Search NASA⌕ Search

SEARCH · Search NASA

Results for “probability analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Data-dependence Profiling to Enable Safe Thread Level Speculation

Data-dependence profling is a technique that enables a com- piler to judiciously decide when the execution of a loop | which the compiler could not prove to be dependence free | should be speculated through the use of Thread Level Spec- ulation (TLS). The data collected by a data-dependence pro- fler can be used to predict if may dependencies reported by a compiler static analysis are likely to materialize at runtime. A cost analysis can then be used to decide that some loops with a lower probability of dependence should be specula- tively parallelized. This paper addresses the question as to whether a loops' dependence behaviour changes when the in- put to the program changes | a study of 57 different bench- marks indicates that it usually does not change. Then the paper describes SpecEval, an automatic speculative paral- lelization framework that uses single-input data-dependence profles to find speculation candidates in the SPEC2006 and PolyBench/C benchmarks. This paper also presents a per- formance evaluation of TLS implementation in IBM's Blue- Gene/Q supercomputer and shows that the performance of TLS is affected by several factors, including the number of speculated loops, the execution-time coverage of speculated loops, the miss-speculation overhead, the L1 cache miss rate and the effect on dynamic instruction path length.

Bhattacharyya, Arnamoy↗

The Application of Performance Assessment to Make Regulatory and Operational Changes in an Operating Nuclear Waste Repository

This paper describes how performance assessment (PA) is used to support changes to the regulatory basis of the Waste Isolation Pilot Plant (WIPP). The WIPP, located near Carlsbad, New Mexico is operated by the U.S. Department of Energy (DOE) as the nation's only deep geologic repository for the disposal of transuranic nuclear waste. In 1998, the Environmental Protection Agency (EPA) certified that the WIPP met the performance requirements of 40 CFR Part 191, Environmental Radiation Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes. A PA analysis of long term (10,000 year) repository performance successfully demonstrated that the probability and consequences of potential long-term releases of radionuclides to the accessible environment would be well below the established limits. These results were key in obtaining WIPP's initial certification, allowing the first shipment and disposal of nuclear waste in March of 1999. As disposal operations have taken place over the last eight years, changes have been identified in the regulatory and operational realms of the facility that would enhance waste disposal efficiency. Such changes, however, cannot be made without prior consent of the EPA. Therefore, changes planned by the DOE must be thoroughly described and supported by varying degrees of the same type of analyses that were conducted to demonstrate the WIPP's containment capabilities as presented in the initial compliance application submitted to EPA in 1996. Such analyses are used to identify the impacts or benefits of implementing the planned change. The DOE has successfully used performance assessment analyses for the approval of changes such as: 1) the disposal of super-compacted waste forms, and; 2) the adoption of new parameters and modeling assumptions In some cases the planned changes are simpler in nature than those listed above, and therefore only require targeted or simplified PA analyses to demonstrate the effect on performance. Targeted analyses have been used to successfully gain approval of the following: 1) a reduction in the amount of magnesium oxide (MgO) chemical buffer backfill that must be emplaced in the repository 2) a change in the repository mining/disposal horizon In addition to these approved changes, the DOE has used PA analyses to support the following planned change requests that await EPA's approval: 1) panel closure redesign 2) further reduction in the MgO-to-waste ratio Finally, this paper will discuss some of the changes that the DOE is currently preparing and plans to submit to the EPA for approval in the near future. This paper will describe how a set of analytical tools initially used to open the WIPP continues to have a role in making the repository more efficient and adaptable as variations in waste streams, operational demands, and other dynamic forces change the operating environment over time. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Linear source method of characteristics in HELIOS2

The Studsvik Scandpower code HELIOS2 is a fast lattice transport code that has gained wide use for reactor fuel cycle analysis in commercial, regulatory, and research environments. It contains two transport solvers - Collision Probabilities (CP) and Method of Characteristics (MoC) - with a general geometry ability and generalized depletion for a variety of fuel types, experimental facilities, and isotope production applications. The HELIOS2 lattice code has been extended with the development of a linear source MoC option. The linear source equations are derived within the scope of the HELIOS2 general geometry and non-cyclic ray tracing. The implementation was tested for fine and coarse spatial mesh models of the 2D C5G7 MOX computational benchmark, which provides a pure and extreme test of a transport solver. The linear source yields at least comparable accuracy with reduced computational resource requirements relative to the flat-source approximation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Application of Indirect Quantification of 133mXe to Calibration of HPGe Detector

The INL Noble Gas Laboratory provides intercomparison samples for the noble gas analysis laboratories as part of the CTBTO PrepCom IMS. Xe-133m is one of the four relevant radionuclides in nuclear explosion monitoring. Without commercially available Xe-133m calibration standards laboratories must create and improve calibration methods. Improvements in calibration methods at the INL NGL benefit the CTBTO PrepCom through better certified values for Xe-133m intercomparison samples. Calibration of High Purity Germanium detectors for Xe-133m quantification is complicated by the coexistence of Xe-133 in samples under analysis. Xe-133 is typically produced in larger quantities, has higher gamma emission probabilities, and its gammas are detected more efficiently than Xe-133m. Xe-133m activity of samples can be indirectly inferred through the 133:133m activity ratio of a batch of material, and the Xe-133 counts in the assay of a small aliquot of the same material. This indirect quantification method can be leveraged to perform detector calibrations for quantification of Xe-133m. Calibrations can be performed by inferring the Xe-133m to certify the sample, and direct counting to determine detector efficiency. A comparison of method results will be shown.

133mXe↗

Assessment of reanalysis daily extreme temperatures with China s homogenized historical dataset during 1979 to 2001 using Probability Density Functions

Using a recently homogenized observational daily maximum (TMAX) and minimum temperature (TMIN) dataset for China, the extreme temperatures from the 40-yr ECMWF Re-Analysis (ERA-40), the Japanese 25-year Reanalysis (JRA-25), the NCEP/Department of Energy Global Reanalysis 2 (NCEP-2), and the ECMWF s ERA-Interim (ERAIn) reanalyses for summer (June August) and winter (December February) are assessed by probability density functions for the periods 1979 2001 and 1990 2001. For 1979 2001, no single reanalysis appears to be consistently accurate across eight areas examined over China. The ERA-40 and JRA-25 reanalyses show similar representations and close skill scores over most of the regions of China for both seasons. NCEP-2 generally has lower skill scores, especially over regions with complex topography. The regional and seasonal differences identified are commonly associated with different geographical locations and the methods used to diagnose these quantities. All the selected reanalysis products exhibit better performance for winter compared to summer over most regions of China. The TMAX values from the reanalysis tend to be systematically underestimated, while TMIN is systematically closer to observed values than TMAX. Comparisons of the reanalyses to reproduce the 99.7 percentiles for TMAX and 0.3 percentiles for TMIN show that most reanalyses tend to underestimate the 99.7 percentiles in maximum temperature both in summer and winter. For the 0.3 percentiles in TMIN, NCEP-2 is relatively inaccurate with a 12 C cold bias over the Qinghai Tibetan Plateau in winter. ERA-40 and JRA-25 generally overestimate the extreme TMIN, and the extreme percentage differences of ERA-40 and JRA-25 are quite similar over all of the regions. The results are generally similar for 1990 2001, but in contrast to the other three reanalysis products the newly released ERAIn is very reasonable, especially for wintertime TMIN, with a skill score greater than 0.83 for each region of China. This demonstrates the great potential of this product for use in future impact assessments on continental scales where those impacts are based on extreme temperatures.

54 ENVIRONMENTAL SCIENCES↗

Flexible classification with spatial quantile comparison and novel statistical features applied to spent nuclear fuel analysis

Multivariate classification algorithms are a common tool in contemporary data science that have begun to be applied to nuclear forensic analyses. Using a multivariate generalization of quantile–quantile plots for comparing unknown statistical distributions, a new model-free multivariate classifier called the Quantile–Quantile Comparator has been developed and tested on the analysis of simulated irradiated nuclear fuel. A method to estimate the sample-specific probability of having made an incorrect classification decision by analyzing the distribution of quantile comparisons has been developed, and methods have been developed to analyze the partition of the known data library used to analyze unknown data. By analyzing this partition, the analyst may identify classes that are likely to be confused, identify test data that are inconsistent with the data library and return a “None-of-the-Above” classification decision, and optimize the class boundaries. In this paper, the development of these capabilities is described, and a case study using real experimental assay data collected from nuclear fuel extracted from the newly-released In conclusion, Spent Fuel Isotopic Composition Database to demonstrate the efficacy of these capabilities is presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effects of matter density profiles on neutrino oscillations for T2HK and T2HKK

This paper explores the effects of changes in matter density profiles on neutrino oscillation probabilities, and whether these could potentially be seen by the future Hyper-Kamiokande long-baseline oscillation experiment (T2HK). The analysis is extended to include the possibility of having an additional detector in Korea (T2HKK). In both cases, we find that these effects will be immeasurable, as the magnitudes of the changes in the oscillation probabilities induced in all density profile scenarios considered here remain smaller than the estimated experimental sensitivity to the oscillation probabilities of each experiment, for both appearance and disappearance channels. Therefore, we conclude that using a constant density profile is sufficient for both the T2HK and T2HKK experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Intermittency in the heat and particle transports in the SINP tokamak scrape-off layer

The intermittent heat and particle transports have been studied in the scrape-off layer of the SINP tokamak. Properties of the plasma structures, responsible for the intermittency, have been measured by the conditional averaging technique. The probability distribution functions of the fluctuations, including temperature fluctuations, obey non-Gaussian statistics. Wavelet analysis has shown that the cross-correlation between two probes is also intermittent in time and is connected to the passage of plasma structures. The structures decay in density as they move radially outward but their temperature is found to decay more rapidly.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Robotic laser adaptive optics imaging of 715 Kepler exoplanet candidates using Robo-AO

The Robo-AO Kepler Planetary Candidate Survey is observing every Kepler planet candidate host star with laser adaptive optics imaging to search for blended nearby stars, which may be physically associated companions and/or responsible for transit false positives. In this paper, we present the results from the 2012 observing season, searching for stars close to 715 Kepler planet candidate hosts. We find 53 companions, 43 of which are new discoveries. We detail the Robo-AO survey data reduction methods including a method of using the large ensemble of target observations as mutual point-spread-function references, along with a new automated companion-detection algorithm designed for large adaptive optics surveys. Our survey is sensitive to objects from ≈0.''15 to 2.''5 separation, with magnitude differences up to Δm ≈ 6. We measure an overall nearby-star probability for Kepler planet candidates of 7.4% ± 1.0%, and calculate the effects of each detected nearby star on the Kepler-measured planetary radius. We discuss several Kepler Objects of Interest (KOIs) of particular interest, including KOI-191 and KOI-1151, which are both multi-planet systems with detected stellar companions whose unusual planetary system architecture might be best explained if they are 'coincident multiple' systems, with several transiting planets shared between the two stars. Finally, we find 98% confidence evidence that short-period giant planets are two to three times more likely than longer-period planets to be found in wide stellar binaries.

79 ASTRONOMY AND ASTROPHYSICS↗

A software package for modeling and simulating fault graphs

This report describes a novel fault graph modeling language and a simulation tool for executing models specified in the language. The modeling language has three primary features that distinguish it from similar reliability analysis tools. These are (1) a random variable modeling several distinct outcomes of a single fault; (2) chains of faults in which one fault triggers another; and (3) time to fail sampled from probability distributions including positive normal, exponential, Weibull with a minimum, or immediate. These features are motivated by their use in a historical analysis of centrifuge reliability.

97 MATHEMATICS AND COMPUTING↗

Two Carrier Analysis of Persistent Photoconductivity in Modulation-Doped Structures

A simultaneous fit of Hall and conductivity data gives quantitative results on the carrier concentration and mobility in both the quantum well and the parallel conduction channel. In this study this method was applied to reveal several new findings on the effect of persistent photoconductivity (PPC) on free-carrier concentrations and mobilities. The increase in the two-dimensional electron-gas (2DEG) concentration is significantly smaller than the apparent one derived from single carrier analysis of the Hall coefficient. In the two types of structures investigated, delta doped and continuously doped barrier, the apparent concentration almost doubles following illumination, while analysis reveals an increase of about 20% in the 2DEG. The effect of PPC on mobility depends on the structure. For the sample with a continuously doped barrier the mobility in the quantum well more than doubles. This increase is attributed to the effective screening of the ionized donors by the large electron concentration in the barrier. In the delta doped barrier sample the mobility is reduced by almost a factor of 2. This decrease is probably caused by strong coupling between the two wells, as is demonstrated by self-consistent analysis.

Schacham, S. E.↗

SOLAR WIND MAGNETOHYDRODYNAMICS TURBULENCE: ANOMALOUS SCALING AND ROLE OF INTERMITTENCY

In this paper, we present a study of the scaling properties and intermittency of solar wind MHD turbulence based on the use of wavelet transforms. More specifically, we use the Haar Wavelet transform on simultaneous 3 s resolution particle and magnetic field data from the Wind spacecraft, to investigate anomalous scaling and intermittency effects of both magnetic field and solar wind velocity fluctuations in the inertial range. For this purpose, we calculated spectra, structure functions, and probability distribution functions. We show that this powerful wavelet technique allows for a systematic elimination of intermittency effects on spectra and structure functions and thus for a clear determination of the actual scaling properties in the inertial range. The scaling of the magnetic field and the velocity fluctuations are found to be fundamentally different. Moreover, when the most intermittent structures superposed to the standard fluctuations are removed, simple statistics are recovered. The magnetic field and the velocity fluctuations exhibit a well-defined, although different, monofractal behavior, following a Kolmogorov -5/3 scaling and a Iroshnikov-Kraichnan -3/2 scaling, respectively. The multifractal properties of solar wind turbulence appear to be determined by the presence of those most intermittent structures. Finally, our wavelet technique also allows for a direct and systematic identification of the most active, singular structures responsible for the intermittency in the solar wind.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the reliability of microvariability tests in quasars

Microvariations probe the physics and internal structure of quasars. Unpredictability and small flux variations make this phenomenon elusive and difficult to detect. Variance-based probes such as the C and F tests, or a combination of both, are popular methods to compare the light curves of the quasar and a comparison star. Recently, detection claims in some studies have depended on the agreement of the results of the C and F tests, or of two instances of the F-test, for rejecting the non-variation null hypothesis. However, the C-test is a non-reliable statistical procedure, the F-test is not robust, and the combination of tests with concurrent results is anything but a straightforward methodology. A priori power analysis calculations and post hoc analysis of Monte Carlo simulations show excellent agreement for the analysis of variance test to detect microvariations as well as the limitations of the F-test. Additionally, the combined tests yield correlated probabilities that make the assessment of statistical significance unworkable. However, it is possible to include data from several field stars to enhance the power in a single F-test, increasing the reliability of the statistical analysis. This would be the preferred methodology when several comparison stars are available. An example using two stars and the enhanced F-test is presented. These results show the importance of using adequate methodologies and avoiding inappropriate procedures that can jeopardize microvariability detections. Power analysis and Monte Carlo simulations are useful tools for research planning, as they can demonstrate the robustness and reliability of different research approaches.

79 ASTRONOMY AND ASTROPHYSICS↗

Thermal Studies of the Laser Inertial Fusion Energy (LIFE) Target during Injection into the Fusion Chamber

The tests of the external heat transfer coefficient suggests that the values used in the numerical analysis for the temperature distribution within the fusion fuel target following flight into the target chamber are probably valid. The tests of the heat transfer phenomena occurring within the target due the rapid heating of the LEH window for the hot gasses within the fusion chamber show that the heat does indeed convect via the internal helium environment of the target towards the capsule and that the pressure in the front compartment of the target adjacent to the LEH window increases such that t bypass venting of the internal helium into the second chamber adjacent to the capsule is needed to prevent rupture of the membranes. The bypass flow is cooled by the hohlraum during this venting. However, the experiments suggest that our internal heat flow calculations may be low by about a factor of 2. Further studies need to be conducted to investigate the differences between the experiment and the numerical analysis. Future studies could also possibly bring the test conditions closer to those expected in the fusion chamber to better validate the results. A sacrificial layer will probably be required on the LEH window of the target and this can be used to mitigate any unexpected target heating.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Crop identification technology assessment for remote sensing (CITARS). Volume 6: Data processing at the laboratory for applications of remote sensing

The results of classifications and experiments for the crop identification technology assessment for remote sensing are summarized. Using two analysis procedures, 15 data sets were classified. One procedure used class weights while the other assumed equal probabilities of occurrence for all classes. Additionally, 20 data sets were classified using training statistics from another segment or date. The classification and proportion estimation results of the local and nonlocal classifications are reported. Data also describe several other experiments to provide additional understanding of the results of the crop identification technology assessment for remote sensing. These experiments investigated alternative analysis procedures, training set selection and size, effects of multitemporal registration, spectral discriminability of corn, soybeans, and other, and analyses of aircraft multispectral data.

Bauer, M. E.↗

Pellet-clad mechanical interaction screening using VERA applied to Watts Bar Unit 1, Cycles 1–3

The Consortium for Advanced Simulation of Light Water Reactors (CASL) aims to provide high-fidelity multiphysics simulations of light water nuclear reactors. To accomplish this, CASL is developing the Virtual Environment for Reactor Applications (VERA), which is a suite of code packages for thermal hydraulics, neutron transport, fuel performance, and coolant chemistry. As VERA continues to grow and expand, there has been an increased focus on incorporating fuel performance analysis methods. One of the primary goals of CASL is to estimate local cladding failure probability through pellet-clad interaction, which consists of both pellet-clad mechanical interaction (PCMI) and stress corrosion cracking. Estimating clad failure is important to preventing release of fission products to the primary system and accurate estimates could prove useful in establishing less conservative power ramp rates or when considering load-follow operations.While this capability is being pursued through several different approaches, the procedure presented in this article focuses on running independent fuel performance calculations with BISON using a file-based one-way coupling based on multicycle output data from high fidelity, pin-resolved coupled neutron transport–thermal hydraulics simulations. This type of approach is consistent with traditional fuel performance analysis methods, which are typically separate from core simulation analyses. A more tightly coupled approach is currently being developed, which is the ultimate target application in CASL.Recent work simulating 12 cycles of Watts Bar Unit 1 with VERA core simulator are capitalized upon, and quarter-core BISON results for parameters of interest to PCMI (maximum centerline fuel temperature, maximum clad hoop stress, and minimum gap size) are presented for Cycles 1–3. In conclusion, based on these results, this capability demonstrates its value and how it could be used as a screening tool for gathering insight into PCMI, singling out limiting rods for further, more detailed analysis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Appalachian Basin Temperature-Depth Maps and Structured Data in support of Feasibility Study of Direct District Heating for the Cornell Campus Utilizing Deep Geothermal Energy

This dataset contains shapefiles and rasters that summarize the results of a stochastic analysis of temperatures at depth in the Appalachian Basin states of New York, Pennsylvania, and West Virginia. This analysis provides an update to the temperature-at-depth maps provided in the Geothermal Play Fairway Analysis of the Appalachian Basin (GPFA-AB) Thermal Quality Analysis (GDR repository 879: https://gdr.openei.org/submissions/879). This dataset improves upon the GPFA-AB dataset by considering several additional uncertainties in the temperature-at-depth calculations, including geologic properties and thermal properties. A Monte Carlo analysis of these uncertain properties and the GPFA-AB estimated surface heat flow was used to predict temperatures at depth using a 1-D heat conduction model. In this data submission, temperatures are provided for depths from 1-5 km in 0.5 km increments. The mean, standard deviation, and selected quantiles of temperatures at these depths are provided as shapefiles with attribute tables that contain the data. Rasters are provided for the mean and standard deviation data. Figures and maps that summarize the data are also provided. For the pixel corresponding to Cornell University, Ithaca, NY, a .csv file containing the 10,000 temperature-depth profiles estimated from the Monte Carlo analysis is provided. These data are summarized in a figure containing violin plots that illustrate the probability of obtaining certain temperatures at depths below Cornell.

15 GEOTHERMAL ENERGY↗

SYSTEMATIC CONTINUUM ERRORS IN THE Ly{alpha} FOREST AND THE MEASURED TEMPERATURE-DENSITY RELATION

Continuum fitting uncertainties are a major source of error in estimates of the temperature-density relation (usually parameterized as a power-law, T {proportional_to} {Delta}{sup {gamma}-1}) of the intergalactic medium through the flux probability distribution function (PDF) of the Ly{alpha} forest. Using a simple order-of-magnitude calculation, we show that few percent-level systematic errors in the placement of the quasar continuum due to, e.g., a uniform low-absorption Gunn-Peterson component could lead to errors in {gamma} of the order of unity. This is quantified further using a simple semi-analytic model of the Ly{alpha} forest flux PDF. We find that under(over)estimates in the continuum level can lead to a lower (higher) measured value of {gamma}. By fitting models to mock data realizations generated with current observational errors, we find that continuum errors can cause a systematic bias in the estimated temperature-density relation of ({delta}({gamma})) Almost-Equal-To -0.1, while the error is increased to {sigma}{sub {gamma}} Almost-Equal-To 0.2 compared to {sigma}{sub {gamma}} Almost-Equal-To 0.1 in the absence of continuum errors.

79 ASTRONOMY AND ASTROPHYSICS↗