Search NASA⌕ Search

SEARCH · Search NASA

Results for “reflected”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Reflection of electromagnetic radiation from plasma with an anisotropic electron velocity distribution

The reflection of a test electromagnetic pulse from the plasma formed as a result of tunnel ionization of atoms in the field of a circularly polarized high-power radiation pulse is analyzed using the kinetic approach to describe electron motion. It is shown that the reflected pulse is significantly amplified due to the development of Weibel instability. The amplification efficiency is determined by the maximum value of the instability growth rate, which depends on the degree of anisotropy of the photoelectron distribution function.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Determination of the coefficient of reflection of metastable argon atoms from the discharge tube wall

Radial profiles of the density of metastable atoms Ar({sup 3}P{sub 2}) in the positive column of a dc glow discharge in argon were measured. Gas-discharge glass tubes with clean inner surfaces and surfaces covered with a carbonitride or carbon film were utilized. The parameters of the discharge plasma under experimental conditions were calculated in the framework of a one-dimensional (along the tube radius) discharge model. The coefficient K of reflection of Ar({sup 3}P{sub 2}) atoms from the tube wall was estimated by comparing the measured and calculated density profiles. It is found that, for a clean tube wall, the coefficient of reflection is K = 0.4 ± 0.2, whereas for a wall covered with a carbonitride or carbon film, it is K < 0.2.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Features of the infrared reflection spectra of SmS semiconductor in the homogeneity range

Infrared reflection spectra in the range of 5200-380 cm{sup -1} were measured for polycrystalline samarium monosulfide samples in the semiconductor phase with compositions Sm{sub 1+x}S lying within the homogeneity range (0 {<=} x {<=} 0.17) in the temperature range of 300-600 K. Five peaks with energies in the range of 1150-880 cm{sup -1}, whose positions depend weakly on the composition and temperature. It was shown that the reflection peaks are associated with {sup 7}F{sub 0}-{sup 7}F{sub 2} transitions of 4f electrons of Sm{sup 2+} ions.

36 MATERIALS SCIENCE↗

Effect of pump wave reflections on the excitation of a dual-wavelength vertical-cavity surface-emitting laser

The effect of pump wave reflections on the carrier generation rate and uniformity of carrier population in quantum wells (QWs) of a dual-wavelength vertical-cavity surface-emitting laser has been numerically analyzed. The laser's active region has been described within a mathematical model allowing any number of QWs and arbitrary distribution of carrier generation rate. It is shown that the optimal arrangement of blocking layers in the active region of a dual-wavelength vertical-cavity surface-emitting laser allows one to obtain a very uniform QW population. It is established that pump wave reflections significantly affect the local carrier generation rate and, therefore, the distribution of excited carriers in the laser structure.

39↗

Investigation of the Far-IR Reflection Spectra of SmS Single Crystals and Polycrystals in the Homogeneity Range

The far- and mid-IR reflection spectra of Sm{sub 1+} {sub x}S (x = 0–0.17) samples are recorded and analyzed, as well as their electrical and structural parameters at a temperature of T = 300 K. The bond ionicity in SmS is shown to fall with a decrease in the area of the X-ray coherent scattering region and an increase in the concentration of donor impurities and, consequently, conduction electron concentration. The electrical conductivity of stoichiometric SmS single crystals and polycrystals can be determined with an error of 10% from the IR reflection spectra. Due to the low structural quality of the samples, the electrical conductivity cannot be determined in the case of deviation from stoichiometry.

36 MATERIALS SCIENCE↗

Silicon Nanopillar Microarrays: Formation and Resonance Reflection of Light

Abstract—The results of investigating the spectral characteristics of reflection from silicon nanopillar (Si NP) microarrays in the wavelength region from 400 to 1100 nm are presented. The Si nanopillars are formed by electron lithography on a negative resist with subsequent reactive ion etching. The Si nanopillars are etched through a resist mask and SiO{sub 2} 100 nm thick. In the spectra of reflection from nanopillar microarrays, minima are observed, the position of which depends strongly on the Si nanopillar diameter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lateral Mode Discrimination in Edge-Emitting Lasers with Spatially Modulated Facet Reflectance

A post-growth technique aimed at spatial modification of facet reflectance of edge-emitting diode lasers has been proposed. It is based on the deposition of an anti-reflection coating and subsequent precise etching with a focused ion beam. The technique allowed suppressing of high-order lateral modes in 10 μm stripe lasers based on ten layers of InAs/InGaAs quantum dots.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anomalous Dependence of the Intensity of X-Ray Reflections of Cs{sub 2}SO{sub 4} on the Crystallite Size and Shape

Detailed X-ray and electron microscopy analyses of Cs{sub 2}SO{sub 4} powders consisting of sphere- and platelike crystallites have been carried out. It is established that the intensity distributions of X-ray reflections in both cases radically differ, with the position on the diffraction-angle axis retained in accordance with the PDF-2 database. Electron microscopy microdiffraction investigations of the orientation of developed surfaces of platelike crystallites revealed four different directions; however, these directions could not provide texture amplification of a number of observed (hkl) reflections. It is suggested that the intensity redistribution is based on the sphericity of X-ray waves incident on the sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plastic Flow Autowaves in Freshwater Ice As Manifested by Microwave Reflection Measurements

Results of measurements of the coefficient of microwave reflection from a block of freshwater ice subjected to plastic deformation are presented. Strong fluctuations in the phase of reflection coefficient are revealed, with the extremum at an electromagnetic radiation wavelength of 1.35 cm. This wavelength corresponds to the region of localized plastic flow autowaves in crystalline media.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High‐Resolution Numerical Simulation and Analysis of Mach ReflectionStructures in Detonation Waves in Low‐Pressure H 2 –O 2 –Ar Mixtures: A Summary of Results Obtained with the Adaptive Mesh Refinement Framework AMROC

Numerical simulation can be key to the understanding of the multidimensional nature of transient detonation waves. However, the accurate approximation of realistic detonations is demanding as a wide range of scales needs to be resolved. This paper describes a successful solution strategy that utilizes logically rectangular dynamically adaptive meshes. The hydrodynamic transport scheme and the treatment of the nonequilibrium reaction terms are sketched. A ghost fluid approach is integrated into the method to allow for embedded geometrically complex boundaries. Large‐scale parallel simulations of unstable detonation structures of Chapman‐Jouguet detonations in low‐pressure hydrogen‐oxygen‐argon mixtures demonstrate the efficiency of the described techniques in practice. In particular, computations of regular cellular structures in two and three space dimensions and their development under transient conditions, that is, under diffraction and for propagation through bends are presented. Some of the observed patterns are classified by shock polar analysis, and a diagram of the transition boundaries between possible Mach reflection structures is constructed.

Deiterding, Ralf↗

Ice Concentration Retrieval in Stratiform Mixed-phase Clouds Using Cloud Radar Reflectivity Measurements and 1D Ice Growth Model Simulations

Measurement of ice number concentration in clouds is important but still challenging. Stratiform mixed-phase clouds (SMCs) provide a simple scenario for retrieving ice number concentration from remote sensing measurements. The simple ice generation and growth pattern in SMCs offers opportunities to use cloud radar reflectivity (Ze) measurements and other cloud properties to infer ice number concentration quantitatively. To understand the strong temperature dependency of ice habit and growth rate quantitatively, we develop a 1-D ice growth model to calculate the ice diffusional growth along its falling trajectory in SMCs. The radar reflectivity and fall velocity profiles of ice crystals calculated from the 1-D ice growth model are evaluated with the Atmospheric Radiation Measurements (ARM) Climate Research Facility (ACRF) ground-based high vertical resolution radar measurements. Combining Ze measurements and 1-D ice growth model simulations, we develop a method to retrieve the ice number concentrations in SMCs at given cloud top temperature (CTT) and liquid water path (LWP). The retrieved ice concentrations in SMCs are evaluated with in situ measurements and with a three-dimensional cloud-resolving model simulation with a bin microphysical scheme. These comparisons show that the retrieved ice number concentrations are within an uncertainty of a factor of 2, statistically.

1-D ice growth↗

Subcritical Noise Measurements with a Nickel-Reflected Plutonium Sphere

Subcritical measurements were conducted with an a-phase plutonium sphere reflected by nickel hemishells using the 252Cf Source-Driven Noise Analysis (CSDNA) method to provide criticality safety benchmark data. Measured configurations included a bare plutonium sphere as well as the plutonium sphere reflected by the following nickel thicknesses: 1.27, 2.54, 3.81, 5.08, and 7.62 cm. A certain ratio of spectral quantities was measured for each configuration which varies linearly with the keff of the system. In addition, two types of Monte Carlo calculations were employed: a modified version of MCNP to calculate the ratio of spectral quantities and a KCODE calculation. From the measured and computed quantities the multiplication of each configuration can be approximated. A comprehensive uncertainty analysis was then performed that includes uncertainties in the geometry and materials present in the system in addition to the uncertainties in the method and nuclear data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

West Flank Coso FORGE: Seismic Reflection

PDFs of seismic reflection profiles 101,110, 111 local to the West Flank FORGE site. 45 line kilometers of seismic reflection data are processed data collected in 2001 through the use of vibroseis trucks. The initial analysis and interpretation of these data was performed by Unruh et al. (2001). Optim processed these data by inverting the P-wave first arrivals to create a 2-D velocity structure. Kirchhoff images were then created for each line using velocity tomograms (Unruh et al., 2001).

15 GEOTHERMAL ENERGY↗

Soda Lake Geothermal: Raw 3D and 3C Seismic-Reflection Data from 2010 Survey

This dataset contains seismic-reflection records created in 2010 around the Soda Lake geothermal field near Fallon, Nevada. The data was collected by the power plant operator at the time, Magma Energy (CYRQ Energy in 2024). This was a petroleum-industry-quality three-dimensional (3D) and three-component (3C) seismic reflection survey covering about 36 square miles. Most of the volume of this raw data set consists of 3D seismic records saved as hundreds of SEG-Y files, with one 3D seismic record file per vibrator source location, called "shot records". The data is in SEG-Y format, with each shot record containing three geophone components for all the geophone sensors active for that shot. In addition to the raw data, provided below are folders containing all of the field logs, metadata, and survey reports produced during the project.

15 GEOTHERMAL ENERGY↗

Custom NEON AOP reflectance mosaics and maps of shade masks, canopy water content

This mosaic of visible to shortwave infrared (VSWIR) data was derived from the assignable asset NEON AOP radiance data that was collected by LBNL’s Watershed Function SFA during the summer of 2018 (DOI: 10.15485/1617204). This atmospheric correction was completed to take into account site-specific terrain variability in the 334 km2 survey area centered around Crested Butte, CO. The atmospheric correction was completed using ACORN atmospheric correction software executed on 200 x 200 pixel kernels rather than line by line in order to capture local flight altitude conditions. Manual cloud delineation removed any small shaded areas that occurred within the data collection areas. Mosaics were developed based on preference for days that were in close timing proximity to the coincident ground campaign and with mosaicing criteria that minimized the angle between the sun and the sensor to retrieve the most consistent reflectance (min_phase_refl_tiled). Finally, we generated shade masks based on the geometry between the sun angle at time of flight, the ground surface, and the sensor. Here we provide the orthomosaiced estimated reflectance data (min_phase_refl_tiled.tif), canopy water content (wtrl), estimated atmospheric water vapor (wtrv), the observational data (obs) for this particular mosaic, the estimated visibility (vis), shade masks derived from the digital surface elevation model (shade) and the digital terrain model (shade_tch) added to the canopy height model (DOI: 10.15485/1617203), and a wavelength metadata file. Each image file is provided as a GeoTiff with internal tiling and LZW compression. These data can also be found on Google Earth Engine for extraction, download, and analysis of smaller extents (Google Earth Engine data is linked in external link table).

2018 NEON and 2025 CHESS Campaigns↗

Contactless Position Measurement System for Remote Alignment of Highly Reflective Objects

The Contactless Position Measurement System (CPMS) permits automatic alignment of highly-reflecting components that cannot or should not be touched by human hands, such as those used in SRF cavities. CPMS also has application during maintenance of fusion reactors, when the components in the reactor are radioactive. The length of time for which humans can handle the components in order to carry out maintenance or repairs is limited. We would like to measure the relative positions of such objects so we can bring them into alignment with motorized stages, thus eliminating the need for human contact. The CPMS is a computer vision system that measures the location of highly reflective components to within a fraction of a millimeter by finding the edges of silhouette images. This is done by placing a uniform, infrared backlight behind the components, and viewing each component with two low-aberration, infrared cameras. Each of these stereoscopic cameras are located within a coordinate system we set up with reference platforms, light sources, and survey cameras distributed around the perimeter of the string assembly room, or fusion reactor. We obtain stereoscopic silhouette images of each component, and we use these to determine the position of the component within our string assembly coordinate system. The CPMS combines the silhouette images with knowledge of the dimensions of the objects to obtain the relative positions of components in its field of view. These position measurements then allow us to mechanically maneuver the components into contact. Once we know where they are, we can move the components to where they are supposed to be with motorized stages or other mechanical means, check they are in the right place, and bolt them together. In Phase I, we built a prototype infrared backlights and cameras, tested it, wrote an analysis program to fit the images. At a range of 50 cm, we are able to measure the relative positions of two stainless steel flanges with an accuracy of 150 μm rms. The next steps are to test the analysis program with motorized stages, build a full-size prototype, and implement it in an cleanroom with SRF cavity assembly. This can be done in a cost effective way given the materials with which the system is designed. As Open Source Instruments achieved more in Phase I than anticipated, despite not receiving a Phase II SBIR grant, we hope to move forward with product development and sales with a testing partner.

43 PARTICLE ACCELERATORS↗

Parallel Broadband Femtosecond Reflection Spectroscopy at a Soft X-Ray Free-Electron Laser

X-ray absorption spectroscopy (XAS) and the directly linked X-ray reflectivity near absorption edges yield a wealth of specific information on the electronic structure around the resonantly addressed element. Observing the dynamic response of complex materials to optical excitations in pump–probe experiments requires high sensitivity to small changes in the spectra which in turn necessitates the brilliance of free electron laser (FEL) pulses. However, due to the fluctuating spectral content of pulses generated by self-amplified spontaneous emission (SASE), FEL experiments often struggle to reach the full sensitivity and time-resolution that FELs can in principle enable. Here, we implement a setup which solves two common challenges in this type of spectroscopy using FELs: First, we achieve a high spectral resolution by using a spectrometer downstream of the sample instead of a monochromator upstream of the sample. Thus, the full FEL bandwidth contributes to the measurement at the same time, and the FEL pulse duration is not elongated by a monochromator. Second, the FEL beam is divided into identical copies by a transmission grating beam splitter so that two spectra from separate spots on the sample (or from the sample and known reference) can be recorded in-parallel with the same spectrometer, enabling a spectrally resolved intensity normalization of pulse fluctuations in pump–probe scenarios. We analyze the capabilities of this setup around the oxygen K- and nickel L-edges recorded with third harmonic radiation of the free electron laser in Hamburg (FLASH), demonstrating the capability for pump–probe measurements with sensitivity to reflectivity changes on the per mill level.

36 MATERIALS SCIENCE↗

Interpretation of a Variable Reflection Nebula Associated with HBC 340 and HBC 341 in NGC 1333

We present multi-epoch, R -band imaging obtained from the Palomar Transient Factory of a small, fan-shaped reflection nebula in NGC 1333 that experiences prominent brightness fluctuations. Photometry of HBC 340 (K7e) and HBC 341 (M5e), a visual pair of late-type, young stellar objects lying near the apex of the nebula, demonstrates that while both are variable, the former has brightened by more than two magnitudes following a deep local minimum in 2014 September. Keck high-dispersion ( R ∼ 45,000–66,000), optical spectroscopy of HBC 340 suggests that the protostar is a spectroscopic binary (HBC 340Aa + HBC 340Ab). Both HBC 340 and HBC 341 exhibit strong H α and forbidden line emission, consistent with accretion and outflow. We conclude that the brightness fluctuations in the reflection nebula represent light echos produced by varying incident radiation emanating from HBC 340. The short-term variability observed in the protostar is attributed to irregular accretion activity, while correlated, dipping behavior on a several hundred day timescale may be due to eclipse-like events caused by orbiting circumstellar material. Archival Hubble Space Telescope imaging of the region reveals a second, faint (F814W ∼ 20.3 mag) companion to HBC 340 that lies 1.″02 (∼235 au) east of the protostar. If associated, this probable substellar mass object (20–50 Jupiter masses), HBC 340B, is likely unrelated to the observed brightness variations. The sustained brightening of HBC 340 since late 2014 can be explained by an EXor-like outburst, the recovery from a long duration eclipse event caused by obscuring circumstellar dust, or by the gradual removal of extincting material from along the line of sight. Our analysis here favors one of the extinction scenarios.

79 ASTRONOMY AND ASTROPHYSICS↗