Search NASA⌕ Search

SEARCH · Search NASA

Results for “simulation analytics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Interference effects on Space Station Freedom and Space Shuttle Orbiter Ku-band single access return links

In a Ku-band single access return (KSAR) communication link via the tracking and data relay satellite system (TDRSS), the interference between spacecraft can be discriminated by opposite antenna polarizations, pseudo-noise code, and by TDRSS antenna beam pointing. For the Space Station Freedom (SSF) KSAR and the Space Shuttle Orbiter (SSO) KSAR links, the pseudo-noise coding technique is not exploited. In addition, the two KSAR links use the same carrier frequency. Therefore, if the SSF and SSO are in close proximity, it is expected that mutual interference will be significant. Mutual interference effects on the SSO-KSAR I-channel and the SSF-KSAR links are analytically derived and compared to the simulation results. For the analysis, the channel is assumed ideally bandlimited and linear. It is demonstrated that a simplified (linear bandlimited channel) analytical approach yields results of adequate accuracy in an estimation of the signal degradation by interference.

Kwon, Hyuck M.↗

An algorithm for physics informed scan path optimization in additive manufacturing

Site specific microstructure control is a critical research area within the field of additive manufacturing due to its potential to revolutionize part performance. One way to achieve site specific microstructure control is through control of the solidification conditions via the construction of intricate scan paths; however, the search space for such a problem is large. Previous attempts only considered the solidification conditions at the top surface while also requiring either lots of manual-fine tuning or large amounts of computational resources. This paper introduces a general method for scan path optimization which considers the solidification conditions in the bulk of the material without an increase in computational expense. This method consists of three core components:1. A heat transfer model for simulating the temperature field at a given time.2. A surrogate model which takes scan pattern information and temperature data and predicts the solidification conditions of the bulk as well as the meltpool depths for a spot melt.3. A decision algorithm to decide which spot melt should be printed next based on the outputs of the surrogate model.Each of these components can be changed without changing the overall method. Within this work, this method is applied in the creation of an algorithm containing a semi-analytic heat transfer model to simulate the temperature field, a fully convolutional neural network (FCNN) as the surrogate model, and a greedy decision algorithm. The resulting algorithm produced complex scan patterns which gave strong results for simulated microstructure control.

36 MATERIALS SCIENCE↗

Bose–Einstein condensation under the cubic–quintic Gross–Pitaevskii equation in radial domains

We study stationary and quasi-stationary solutions for the cubic–quintic Gross–Pitaevskii equation modeling Bose–Einstein condensates (BECs) in one, two, and three spatial dimensions under the assumption of radial symmetry with the BEC dynamics influenced by a confining potential. We consider both repulsive and attractive cubic interactions – corresponding respectively to repulsive and attractive two-body interactions – under similar frameworks in order to deduce the effects of the potentials in each case. We also carefully consider the role played by the quintic nonlinearity (modeling the strength of inter-atomic coupling) in modifying the solutions arising due to a purely cubic interaction term. In one spatial dimension, we obtain a variety of exact solutions in the zero-potential limit (including new periodic solutions which generalize known soliton solutions) as well as perturbation solutions for small amplitude confining potentials. For more general forms of the confining potential, we rely on numerical simulations, but these agree with the analytical results when the latter are valid. We also consider the limit where the quintic term dominates the cubic term (with such a limit relevant in the study of a Tonks–Girardeau gas). Under the assumption of radial symmetry, we also consider cylindrical (or, cigar-shaped) and spherical BECs. We consider the nonperturbative regime where either the potential or the amplitude of the solutions is large, obtaining various qualitative analytical results. When the kinetic energy term is small (relative to the nonlinearity and the confining potential), we recover the expected Thomas–Fermi approximation for the stationary solutions. Numerical simulations, under a variety of external confining potentials, are then used to understand the role these potentials play on the BEC solution structure for both the attractive and repulsive regimes. This assortment of analytical and numerical results allows us to better understand the structure of BECs modeled via cubic–quintic Gross–Pitaevskii equation under confining potentials with radial symmetry. Some of the results are natural extensions of those for the cubic Gross–Pitaevskii equation, while others appear new.

74 ATOMIC AND MOLECULAR PHYSICS↗

Analysis of the fast electron scaling theory for the heating of a solid target

Simple scaling laws for laser-generated fast electron heating of solids that employ a Spitzer-like resistivity are unlikely to be universally adequate as this model does not produce an adequate description of a material's behaviour at low temperatures. This is demonstrated in this paper by using both numerical simulations and by comparing existing analytical scaling laws for low temperature resistivity. Generally, we find that, in the low temperature regime, the scaling for the heating of the background material has a much stronger dependence on the key empirical parameters (laser intensity, pulse duration, etc.).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reverse Monte Carlo modeling for low-dimensional systems

Reverse Monte Carlo (RMC) is one of the commonly used approaches for modeling total scattering data. However, to extend the capability of the RMC method for refining the structure of nanomaterials, the dimensionality and finite size need to be considered when calculating the pair distribution function (PDF). To achieve this, the simulation box must be set up to remove the periodic boundary condition in one, two or three of the dimensions. This then requires a correction to be applied for the difference in number density between the real system and the simulation box. In certain circumstances an analytical correction for the uncorrelated pairings of atoms is also applied. The validity and applicability of our methodology is demonstrated by applying the algorithms to simulate the PDF patterns of carbon systems with various dimensions, and also by using them to fit experimental data of CuO nanoparticles. This alternative approach for characterizing the local structure of nano-systems with the total scattering technique will be made available via the RMCProfile package. The theoretical formulation and detailed explanation of the analytical corrections for low-dimensional systems – 2D nanosheets, 1D nanowires and 0D nanoparticles – is also given.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamic heterogeneity in the folding/unfolding transitions of FiP35

Molecular dynamics simulations have become an important tool in studying protein dynamics over the last few decades. Atomistic simulations on the order of micro- to milliseconds are becoming feasible and are used to study the state-of-the-art experiments in atomistic detail. Yet, analyzing the high-dimensional-long-temporal trajectory data is still a challenging task and sometimes leads to contradictory results depending on the analyses. To reveal the dynamic aspect of the trajectory, here we propose a simple approach which uses a time correlation function matrix and apply to the folding/unfolding trajectory of FiP35 WW domain [Shaw et al., Science 330, 341 (2010)]. The approach successfully characterizes the slowest mode corresponding to the folding/unfolding transitions and determines the free energy barrier indicating that FiP35 is not an incipient downhill folder. The transition dynamics analysis further reveals that the folding/unfolding transition is highly heterogeneous, e.g., the transition path time varies by ∼100 fold. We identify two misfolded states and show that the dynamic heterogeneity in the folding/unfolding transitions originates from the trajectory being trapped in the misfolded and half-folded intermediate states rather than the diffusion driven by a thermal noise. The current results help reconcile the conflicting interpretations of the folding mechanism and highlight the complexity in the folding dynamics. This further motivates the need to understand the transition dynamics beyond a simple free energy picture using simulations and single-molecule experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SAAF: SANS data Analysis using Analytical Functions

The recently completed Extended Q-Range Small Angle Scattering Diffractometer (EQ-SANS) has put the focus on its software needs with renewed urgency. In a series of efforts, we aim at providing a complete set of software solutions on the EQ-SANS instrument. These programs include initial data processing, data correction and reduction, analytical model fitting to the scattering data, Monte Carlo simulation for structure determination, and virtual instrument simulation for experiment planning. SAAF is one such program for analytical data modeling. It takes the reduced EQ-SANS data and allows users to fit the data to analytical models. These models are easy to write. They can either be user written, or from the pre-supplied model library.

Data Analysis↗

In-Situ Statistical Analysis of Autotune Simulation Data using Graphical Processing Units

Developing accurate building energy simulation models to assist energy efficiency at speed and scale is one of the research goals of the Whole-Building and Community Integration group, which is a part of Building Technologies Research and Integration Center (BTRIC) at Oak Ridge National Laboratory (ORNL). The aim of the Autotune project is to speed up the automated calibration of building energy models to match measured utility or sensor data. The workflow of this project takes input parameters and runs EnergyPlus simulations on Oak Ridge Leadership Computing Facility’s (OLCF) computing resources such as Titan, the world’s second fastest supercomputer. Multiple simulations run in parallel on nodes having 16 processors each and a Graphics Processing Unit (GPU). Each node produces a 5.7 GB output file comprising 256 files from 64 simulations. Four types of output data covering monthly, daily, hourly, and 15- minute time steps for each annual simulation is produced. A total of 270TB+ of data has been produced. In this project, the simulation data is statistically analyzed in-situ using GPUs while annual simulations are being computed on the traditional processors. Titan, with its recent addition of 18,688 Compute Unified Device Architecture (CUDA) capable NVIDIA GPUs, has greatly extended its capability for massively parallel data processing. CUDA is used along with C/MPI to calculate statistical metrics such as sum, mean, variance, and standard deviation leveraging GPU acceleration. The workflow developed in this project produces statistical summaries of the data which reduces by multiple orders of magnitude the time and amount of data that needs to be stored. These statistical capabilities are anticipated to be useful for sensitivity analysis of EnergyPlus simulations

accelerators↗

Advanced Finite-Volume Numerics and Source Term Assumptions for Kernel and G-Equation Modelling of Propane/Air Flames

Here G-Equation models represent propagating flame fronts with an implicit two-dimensional surface representation (level-set). Level-set methods are fast, as transport source terms for the implicit surface can be solved with finite-volume operators on the finite-volume domain, without having to build the actual surface. However, they include approximations whose practical effects are not properly understood. In this study, we improved the numerics of the FRESCO CFD code’s G-Equation solver and developed a new method to simulate kernel growth using signed distance functions and the analytical sphere-mesh overlap. We analyzed their role for simulating propane/air flames, using three well-established constant-volume configurations: a one-dimensional, freely propagating laminar flame; a disc-shaped, constant-volume swirl combustor; and torch-jet flame development through an orifice from a two-chamber device. We tested the explicit (sub-cycled) vs. implicit formulation for the standard transport operators (advection, diffusion, compressibility). In addition to the accurate flame swept-volume method for chemistry and species source term, we developed a more accurate estimator for the burnt/unburnt split cell composition. Then, we developed a signed-distance-function (SDF) based method which provides a more stable reinitialization of the level-set field at every time-step. We found that simplifying assumptions common to several G-Equation implementations, for straightforward terms such as compressibility and advection, lead to large errors in predicting the propagation of even laminar flames, with deviations up to ~300% in simulated vs. formulated flame speed. Conversely, the enhanced numerics enabled through the SDF field reinitialization and improved chemistry source term improve simulation stability and smooth flame propagation even with significantly larger solver time-steps.

42 ENGINEERING↗

Scaling laws for gas breakdown for nanoscale to microscale gaps at atmospheric pressure

Electronics miniaturization motivates gas breakdown predictions for microscale and smaller gaps, since traditional breakdown theory fails when gap size, d, is smaller than ∼15 μm at atmospheric pressure, p{sub atm}. We perform a matched asymptotic analysis to derive analytic expressions for breakdown voltage, V{sub b}, at p{sub atm} for 1 nm ≤ d ≤ 35 μm. We obtain excellent agreement between numerical, analytic, and particle-in-cell simulations for argon, and show V{sub b} decreasing as d → 0, instead of increasing as predicted by Paschen's law. This work provides an analytic framework for determining V{sub b} at atmospheric pressure for various gap distances that may be extended to other gases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ground Heat Flux Reconstruction Using Bayesian Uncertainty Quantification Machinery and Surrogate Modeling

Ground heat flux (G 0 ) is a key component of the land-surface energy balance of high-latitude regions. Despite its crucial role in controlling permafrost degradation due to global warming, G 0 is sparsely measured and not well represented in the outputs of global scale model simulation. In this study, an analytical heat transfer model is tested to reconstruct G 0 across seasons using soil temperature series from field measurements, Global Climate Model, and climate reanalysis outputs. The probability density functions of ground heat flux and of model parameters are inferred using available G 0 data (measured or modeled) for snow-free period as a reference. When observed G 0 is not available, a numerical model is applied using estimates of surface heat flux (dependent on parameters) as the top boundary condition. These estimates (and thus the corresponding parameters) are verified by comparing the distributions of simulated and measured soil temperature at several depths. Aided by state-of-the-art uncertainty quantification methods, the developed G 0 reconstruction approach provides novel means for assessing the probabilistic structure of the ground heat flux for regional permafrost change studies.

54 ENVIRONMENTAL SCIENCES↗

‘Soft’ amplifier circuits based on field-effect ionic transistors

Soft materials can be used as the building blocks for electronic devices with extraordinary properties. We introduce a theoretical model for a field-effect transistor in which ions are the gated species instead of electrons. Our model incorporates readily-available soft materials, such as conductive porous membranes and polymer-electrolytes to represent a device that regulates ion currents and can be integrated as a component in larger circuits. By means of Nernst–Planck numerical simulations as well as an analytical description of the steady-state current we find that the responses of the system to various input voltages can be categorized into ohmic, sub-threshold, and active modes. This is fully analogous to what is known for the electronic field-effect transistor (FET). Pivotal FET properties such as the threshold voltage and the transconductance crucially depend on the half-cell redox potentials of the source and drain electrodes as well as on the polyelectrolyte charge density and the gate material work function. We confirm the analogy with the electronic FETs through numerical simulations of elementary amplifier circuits in which we successfully substitute the electronic transistor by an ionic transistor.

42 ENGINEERING↗

SIMULATIONS OF WIDE-FIELD WEAK-LENSING SURVEYS. II. COVARIANCE MATRIX OF REAL-SPACE CORRELATION FUNCTIONS

Using 1000 ray-tracing simulations for a {Lambda}-dominated cold dark model in Sato et al., we study the covariance matrix of cosmic shear correlation functions, which is the standard statistics used in previous measurements. The shear correlation function of a particular separation angle is affected by Fourier modes over a wide range of multipoles, even beyond a survey area, which complicates the analysis of the covariance matrix. To overcome such obstacles we first construct Gaussian shear simulations from the 1000 realizations and then use the Gaussian simulations to disentangle the Gaussian covariance contribution to the covariance matrix we measured from the original simulations. We found that an analytical formula of Gaussian covariance overestimates the covariance amplitudes due to an effect of the finite survey area. Furthermore, the clean separation of the Gaussian covariance allows us to examine the non-Gaussian covariance contributions as a function of separation angles and source redshifts. For upcoming surveys with typical source redshifts of z{sub s} = 0.6 and 1.0, the non-Gaussian contribution to the diagonal covariance components at 1 arcmin scales is greater than the Gaussian contribution by a factor of 20 and 10, respectively. Predictions based on the halo model qualitatively well reproduce the simulation results, however show a sizable disagreement in the covariance amplitudes. By combining these simulation results we develop a fitting formula to the covariance matrix for a survey with arbitrary area coverage, taking into account effects of the finiteness of survey area on the Gaussian covariance.

79 ASTRONOMY AND ASTROPHYSICS↗

Guidance Enhancements and Performance Assessments for the Mars Ascent Vehicle Spin-Stabilized Upper Stage Configuration

he objective of the Mars Sample Return (MSR) campaign is to return samples from the surface of Mars to Earth for research. As one element of the MSR campaign, the Mars Ascent Vehicle (MAV) is responsible for transporting the samples from the surface of Mars to a Low-Martian Orbit (LMO) for retrieval. Complete autonomy is required throughout ascent, and orbital insertion is constrained by tight dispersion boundaries. An unguided, spin-stabilized second stage for MAV has been selected over a guided upper-stage to drive mass savings and reduce overall MSR campaign mass risk, at the cost of reduced GNC capability. To address this design change, the MAV GNC team has derived a robust prediction algorithm, building on previous energy management schemes, that solves for a single inertial pointing direction solution for the spin-stabilized 2nd stage burn. Algorithm stability is explored that compared to previous versions of the algorithm. Also, a set of analytical partials was developed to study MAV’s dispersed orbital insertion performance with respect to MAV system uncertainties. These partials were verified through simulation analysis and prove useful for analytical insight into the dynamics of MAV during the 2nd stage maneuver.

Jason M Everett↗

Guidance Enhancements and Performance Assessments for the Mars Ascent Vehicle Spin-Stabilized Upper Stage Configuration

The objective of the Mars Sample Return (MSR) campaign is to return samples from the surface of Mars to Earth for research. As one element of the MSR campaign, the Mars Ascent Vehicle (MAV) is responsible for transporting the samples from the surface of Mars to a Low-Martian Orbit (LMO) for retrieval. Complete autonomy is required throughout ascent, and orbital insertion is constrained by tight dispersion boundaries. An unguided, spin-stabilized second stage for MAV has been selected over a guided upper-stage to drive mass savings and reduce overall MSR campaign mass risk, at the cost of reduced GNC capability. To address this design change, the MAV GNC team has derived a robust prediction algorithm, building on previous energy management schemes, that solves for a single inertial pointing direction solution for the spin-stabilized 2nd stage burn. Algorithm stability is explored that compared to previous versions of the algorithm. Also, a set of analytical partials was developed to study MAV’s dispersed orbital insertion performance with respect to MAV system uncertainties. These partials were verified through simulation analysis and prove useful for analytical insight into the dynamics of MAV during the 2nd stage maneuver.

GNC↗

Advanced Simulation of ITER Core X-ray Crystal Spectroscopy

X-Ray Simulation Analysis (XRSA) is an analytical ray-tracing mixed code developed specifically for the ITER Core X-Ray Crystal Spectroscopy (XRCS-Core) diagnostic, which employs a dual-reflection configuration incorporating multiple pre-reflectors made of Highly Oriented Pyrolytic Graphite (HOPG) and spherically curved analyzing crystals. The ITER XRCS-Core is designed for high spectral resolution measurement in specific wavelength ranges, including narrow bands around 1.354 Å for W 64+ , 2.19 Å for Xe 51+ , and 2.555 Å for Xe 44+ and Xe 47+ , enabling diagnostic capability across a broad electron temperature range in the ITER plasma. XRSA facilitates efficient simulation of the spectral performance of this complex X-ray spectroscopic system. Recent updates to the XRSA code have incorporated two critical effects: auto-focusing, which specifically applies to HOPG, and polarization. These two effects are particularly important in the dual-reflection configuration used in the ITER XRCS-Core system to provide more accurate modeling results. Here, simulations conducted with the updated code demonstrate that polarization has a substantial impact on the performance of the dual-reflection system. Additionally, the combined influence of polarization and system layout introduces performance variations across channels through the same crystal.

Computer graphics↗

Hydrodynamic Simulations of Moonlet-induced Propellers in Saturn’s Rings: Application to Blériot

One of the biggest successes of the Cassini mission is the detection of small moons (moonlets) embedded in Saturns rings that cause S-shaped density structures in their close vicinity, called propellers. Here, we present isothermal hydrodynamic simulations of moonlet-induced propellers in Saturn’s A ring that denote a further development of the original model. We find excellent agreement between these new hydrodynamic and corresponding N-body simulations. Furthermore, the hydrodynamic simulations confirm the predicted scaling laws and the analytical solution for the density in the propeller gaps. Finally, this mean field approach allows us to simulate the pattern of the giant propeller Blériot, which is too large to be modeled by direct N-body simulations. Our results are compared to two stellar occultation observations by the Cassini Ultraviolet Imaging Spectrometer (UVIS), which intersect the propeller Blériot. Best fits to the UVIS optical depth profiles are achieved for a Hill radius of 590 m, which implies a moonlet diameter of about 860 m. Furthermore, the model favors a kinematic shear viscosity of the surrounding ring material of ν {sub 0} = 340 cm{sup 2} s{sup −1}, a dispersion velocity in the range of 0.3 cm s{sup −1} < c {sub 0} < 1.5 cm s{sup −1}, and a fairly high bulk viscosity 7 < ξ {sub 0}/ν {sub 0} < 17. These large transport values might be overestimated by our isothermal ring model and should be reviewed by an extended model including thermal fluctuations.

79 ASTRONOMY AND ASTROPHYSICS↗

Uncertainty Quantification via Random Domain Decomposition and Probabilistic Collocation on Sparse Grids

Due to lack of knowledge or insufficient data, many physical systems are subject to uncertainty. Such uncertainty occurs on a multiplicity of scales. In this study, we conduct the uncertainty analysis of diffusion in random composites with two dominant scales of uncertainty: Large-scale uncertainty in the spatial arrangement of materials and small-scale uncertainty in the parameters within each material. A general two-scale framework that combines random domain decomposition (RDD) and probabilistic collocation method (PCM) on sparse grids to quantify the large and small scales of uncertainty, respectively. Using sparse grid points instead of standard grids based on full tensor products for both the large and small scales of uncertainty can greatly reduce the overall computational cost, especially for random process with small correlation length (large number of random dimensions). For one-dimensional random contact point problem and random inclusion problem, analytical solution and Monte Carlo simulations have been conducted respectively to verify the accuracy of the combined RDD-PCM approach. Additionally, we employed our combined RDD-PCM approach to two- and three-dimensional examples to demonstrate that our combined RDD-PCM approach provides efficient, robust and nonintrusive approximations for the statistics of diffusion in random composites.

97 MATHEMATICS AND COMPUTING↗