Search NASA⌕ Search

SEARCH · Search NASA

Results for “stability selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

A model for the selective amplification of spatially coherent waves in a centrifugal compressor on the verge of rotating stall

A simple model for the stability zones of a low speed centrifugal compressor is developed, with the goal of understanding the driving mechanism for the changes in stalling behavior predicted for, and observed in, the Purdue Low Speed Centrifugal Research Compressor Facility. To this end, earlier analyses of rotating stall suppression in centrifugal compressors are presented in a reduced form that preserves the essential parameters of the model that affect the stalling behavior of the compressor. The model is then used to illuminate the relationship between compressor geometry, expected mode shape, and regions of amplification for weak waves which are indicative of the susceptibility of the system to rotating stall. The results demonstrate that increasing the stagger angle of the diffuser vanes, and consequently the diffusion path length, results in the compressor moving towards a condition where higher-order spatial modes are excited during stall initiation. Similarly, flow acceleration in the diffuser section caused by an increase in the number of diffuser vanes also results in the excitation of higher modes.

Lawless, Patrick B.↗

Magnetic Materials: Chiral Spin Textures in Amorphous Iron–Germanium Thick Films (Adv. Mater. 8/2021)

Topological solitary fields, such as magnetic and polar skyrmions, are envisioned to revolutionize microelectronics. These configurations have been stabilized in solid-state materials with a global inversion symmetry breaking, which translates in magnetic materials into a vector spin exchange known as the Dzyaloshinskii–Moriya interaction (DMI), as well as spin chirality selection and isotropic solitons. This work reports experimental evidence of 3D chiral spin textures, such as helical spins and skyrmions with different chirality and topological charge, stabilized in amorphous Fe–Ge thick films. These results demonstrate that structurally and chemically disordered materials with a random DMI can resemble inversion symmetry broken systems with similar magnetic properties, moments, and states. In conclusion, disordered systems are distinguished from systems with global inversion symmetry breaking by their degenerate spin chirality that allows for forming isotropic and anisotropic topological spin textures at remanence, while offering greater flexibility in materials synthesis, voltage, and strain manipulation.

36 MATERIALS SCIENCE↗

Nickel promotes selective ethylene epoxidation on silver

Over the last 80 years, chlorine (Cl) has been the primary promoter of the ethylene epoxidation reaction valued at ~40 billion USD per year, providing a ~25% selectivity increase over unpromoted silver (Ag) (~55%). Promoters such as cesium, rhenium, and molybdenum each add a few percent of selectivity enhancements to achieve 90% overall, but their codependence on Cl makes optimizing and understanding their function complex. Here, we took a theory-guided, single-atom alloy approach to identify nickel (Ni) as a dopant in Ag that can facilitate selective oxidation by activating molecular oxygen (O 2 ) without binding oxygen (O) too strongly. Surface science experiments confirmed the facile adsorption/desorption of O 2 on NiAg, as well as demonstrating that Ni serves to stabilize unselective nucleophilic oxygen. Supported Ag catalyst studies revealed that the addition of Ni in a 1:200 Ni to Ag atomic ratio provides a ~25% selectivity increase without the need for Cl co-flow and acts cooperatively with Cl, resulting in a further 10% initial increase in selectivity.

36 MATERIALS SCIENCE↗

Uncertainty evaluation for twist drilling stability model

This paper describes the first uncertainty analysis for drilling stability using a frequency-domain drilling stability model. The stability model inputs include: the modal parameters for the torsional-axial vibration mode from the twist drill-holder-spindle axial frequency response function; and the mechanistic coefficients that relate the torque and thrust force to chip area for the selected drill-workpiece material combination. Furthermore, Monte Carlo simulation is applied to propagate the input uncertainties to output uncertainty in the predicted stability map, which separates stable from unstable (chatter) zones in the spindle speed-chip width parameter space. Additionally, the mean stability boundary and its 95% confidence intervals are determined for five cases: varying all four inputs simultaneously and varying them individually. This enables the individual sensitivities to be compared. Experimental results from drilling tests are included for comparison to the prediction. Additionally, Matlab code is provided to implement the stability model and Monte Carlo uncertainty analysis.

42 ENGINEERING↗

Selective dissolution of halide perovskites as a step towards recycling solar cells

Most research on perovskite solar cells has focused on improving power-conversion efficiency and stability. However, if one could refurbish perovskite solar cells, their stability might not be a critical issue. From the perspective of cost effectiveness, if failed, perovskite solar cells could be collected and recycled; reuse of their gold electrodes and transparent conducting glasses could reduce the price per watt of perovskite photovoltaic modules. Here, we present a simple and effective method for removing the perovskite layer and reusing the mesoporous TiO 2 -coated transparent conducting glass substrate via selective dissolution. We find that the perovskite layer can be easily decomposed in polar aprotic solvents because of the reaction between polar aprotic solvents and Pb 2+ cations. After 10 cycles of recycling, a mesoporous TiO 2 -coated transparent conducting glass substrate-based perovskite solar cell still shows a constant power-conversion efficiency, thereby demonstrating the possibility of recycling perovskite solar cells.

14 SOLAR ENERGY↗

Method and apparatus for implementing ultra-high stability stages with combined degrees of freedom for multiple axes of motion

A method and apparatus are provided for implementing an ultra-high stability stage with combined degrees of freedom for multiple axes of motion. The ultra-high stability stage includes a base, a driving wedge supported by the base and a following wedge supported by the driving wedge. The base and each wedge are formed of a selected stable material having predefined rigidity and low thermal expansion coefficient. Integrated air bearings, respective driving mechanics associated with each of the wedges and guiding components having selected degrees of freedom enable movement about multiple axes of motion, such as X, Y, Z translation axes, and rotation X and rotation Y axes. Another ultra-high stability stage with combined degrees of freedom for multiple axes of motion includes an intermediate wedge between the driving wedge and the following wedge to enable additional movement about a rotation X axis.

Preissner, Curt Alfred↗

Secondary Waste Form Down Selection Data Package – Ceramicrete

As part of high-level waste pretreatment and immobilized low activity waste processing, liquid secondary wastes will be generated that will be transferred to the Effluent Treatment Facility on the Hanford Site for further treatment. These liquid secondary wastes will be converted to stable solid waste forms that will be disposed in the Integrated Disposal Facility. Currently, four waste forms are being considered for stabilization and solidification of the liquid secondary wastes. These waste forms are Cast Stone, Ceramicrete, DuraLith, and Fluidized Bed Steam Reformer. The preferred alternative will be down selected from these four waste forms. Pacific Northwest National Laboratory is developing data packages to support the down selection process. The objective of the data packages is to identify, evaluate, and summarize the existing information on the four waste forms being considered for stabilization and solidification of the liquid secondary wastes. The information included will be based on information available in the open literature and from data obtained from testing currently underway. This data package is for the Ceramicrete waste form. Ceramicrete is a relatively new engineering material developed at Argonne National Laboratory to treat radioactive and hazardous waste streams (e.g., Wagh 2004; Wagh et al. 1999a, 2003; Singh et al. 2000). This cement-like waste form can be used to treat solids, liquids, and sludges by chemical immobilization, microencapsulation, and/or macroencapsulation. The Ceramicrete technology is based on chemical reaction between phosphate anions and metal cations to form a strong, dense, durable, low porosity matrix that immobilizes hazardous and radioactive contaminants as insoluble phosphates and microencapsulates insoluble radioactive components and other constituents that do not form phosphates. Ceramicrete is a type of phosphate-bonded ceramic, which are also known as chemically bonded phosphate ceramics. The Ceramicrete binder is formed through an acid-base reaction between calcined magnesium oxide (MgO; a base) and potassium hydrogen phosphate (KH{sub 2}PO{sub 4}; an acid) in aqueous solution. The reaction product sets at room temperature to form a highly crystalline material. During the reaction, the hazardous and radioactive contaminants also react with KH{sub 2}PO{sub 4} to form highly insoluble phosphates. In this data package, physical property and waste acceptance data for Ceramicrete waste forms fabricated with wastes having compositions that were similar to those expected for secondary waste effluents, as well as secondary waste effluent simulants from the Hanford Tank Waste Treatment and Immobilization Plant were reviewed. With the exception of one secondary waste form formulation (25FA+25 W+1B.A. fabricated with the mixed simulant did not meet the compressive strength requirement), all the Ceramicrete waste forms that were reviewed met or exceeded Integrated Disposal Facility waste acceptance criteria.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Quasi-Steady Flexible Launch Vehicle Stability Analysis Using Steady CFD with Unsteady Aerodynamic Enhancement

Launch vehicles frequently experience a reduced stability margin through the transonic Mach number range. This reduced stability margin is caused by an undamping of the aerodynamics in one of the lower frequency flexible or rigid body modes. Analysis of the behavior of a flexible vehicle is routinely performed with quasi-steady aerodynamic lineloads derived from steady rigid computational fluid dynamics (CFD). However, a quasi-steady aeroelastic stability analysis can be unconservative at the critical Mach numbers where experiment or unsteady computational aeroelastic (CAE) analysis show a reduced or even negative aerodynamic damping. This paper will present a method of enhancing the quasi-steady aeroelastic stability analysis of a launch vehicle with unsteady aerodynamics. The enhanced formulation uses unsteady CFD to compute the response of selected lower frequency modes. The response is contained in a time history of the vehicle lineloads. A proper orthogonal decomposition of the unsteady aerodynamic lineload response is used to reduce the scale of data volume and system identification is used to derive the aerodynamic stiffness, damping and mass matrices. The results of the enhanced quasi-static aeroelastic stability analysis are compared with the damping and frequency computed from unsteady CAE analysis and from a quasi-steady analysis. The results show that incorporating unsteady aerodynamics in this way brings the enhanced quasi-steady aeroelastic stability analysis into close agreement with the unsteady CAE analysis.

Bartels, Robert E.↗

TiO2 Nanocrystal-Framed Li 2 TiSiO 5 Platelets for Low-Voltage Lithium Battery Anode

Titanium-based anode materials are attracting considerable attention for use in high-performance lithium-ion batteries, but the compromised energy density caused by high voltage plateaus and unsatisfactory capacities severely retards their practical applications. Herein, a molten-salt synthesis of Li 2 TiSiO 5 crystalline platelets and a subsequent selective facet modification by in situ growth of TiO 2 nanocrystal frames are facilely achieved. The discharge voltage plateau at around 0.5 V renders the Li 2 TiSiO 5 anode safe compared with graphite and confers a high energy density compared with zero-strain Li 4 Ti 5 O 12 anode. With the optimized size, structure, and content of modified TiO2 nanocrystals associated with the exposed (001) plane of Li 2 TiSiO 5 , the Li 2 TiSiO 5 -based anodes can deliver a capacity of above 300 mAh g -1 , enhanced rate performance, and a capacity retention of 66% after 10 000 cycles. In situ X-ray diffraction and ex situ transmission electron microscopy have demonstrated the structural stability of the anodes upon charge/discharge. Further theoretical calculation reveals 3D migration paths of Li + ions in Li 2 TiSiO 5 . The selective modification of in situ grown TiO2 nanocrystals on certain facets of crystallites opens a new door for the development of electrode materials possessing superior electrochemical properties.

anodes↗

Chiral Spin Textures in Amorphous Iron–Germanium Thick Films

Topological solitary fields, such as magnetic and polar skyrmions, are envisioned to revolutionize microelectronics. These configurations have been stabilized in solid-state materials with a global inversion symmetry breaking, which translates in magnetic materials into a vector spin exchange known as the Dzyaloshinskii-Moriya interaction (DMI), as well as spin chirality selection and isotropic solitons. This work reports experimental evidence of 3D chiral spin textures, such as helical spins and skyrmions with different chirality and topological charge, stabilized in amorphous Fe-Ge thick films. Overall, these results demonstrate that structurally and chemically disordered materials with a random DMI can resemble inversion symmetry broken systems with similar magnetic properties, moments, and states. Disordered systems are distinguished from systems with global inversion symmetry breaking by their degenerate spin chirality that allows for forming isotropic and anisotropic topological spin textures at remanence, while offering greater flexibility in materials synthesis, voltage, and strain manipulation.

36 MATERIALS SCIENCE↗

Automatic signal decoding and sensor stability of a 3-electrode mixed-potential sensor for NO x /NH 3 quantification

Sensors to detect mixtures of NO x /NH 3 are needed to monitor emissions of diesel automobiles where a selective catalytic reduction system uses an NH 3 mediated reaction to reduce NO x . We report on the application of a three electrode La 0.8 Sr 0.2 CrO 3 , Au 0.5 Pd 0.5 , Pt mixed potential sensor using yttria-stabilized-zirconia (YSZ) as a solid electrolyte to NO x /NH 3 sensing. Artificial neural networks were used to automatically decode the concentrations of NO x /NH 3 and errors of less than 15% are achieved. The optimal architecture for ANN decoding and the maximum density of training data points are also determined. The stability of the sensor was monitored by electrochemical impedance spectroscopy. The impedance associated with YSZ oxygen ion conduction and the electrochemical reactions at the three-phase interface are tracked for a period of over 100 days.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shapeshifting Nanocatalyst for CO2 Conversion

The conversion of CO2 into high-value chemicals through a photoreduction reaction in water is a promising route to reduce the dependence on fossil fuels. Enhancing selectivity toward hydrocarbons or alcohols can be achieved by Ag-Cu alloys. However, the stabilized surface state created by Ag-Cu interactions is still poorly understood. In this work, multi-modal in situ X-ray experiments reveals underlying mechanisms and the evolution of Ag-Cu nanoparticles under CO2 reduction reaction (CO2RR) conditions. Both morphological and chemical changes of Ag and Cu species induced by diffusion mechanics are tracked during nanocatalyst operation. The initial spheroid Ag-Cu nanoparticles are composed of a Cu-rich shell and Ag-rich core. The reduction treatment promotes Ag migration toward the surface. During photocatalytic CO2 reduction reaction, Cu atoms migrate back to the surface, forming Ag-Cu-O species. The study observes the surface oxidation of Cu(0) to Cu+ and the presence of Ag at the sub-surface region. Furthermore, nanoparticles change their shape, decreasing their specific surface area, driven by Cu diffusion during the CO2 photoreduction reaction. The results provide invaluable insights into the dynamic restructuring of the catalyst under reaction conditions and into the active species responsible for CO2 conversion.

CO2 reduction reaction↗

Production and characterization of monoclonal antibody against a triple negative breast cancer cell line

Highlights: • Discovery of potential biomarkers that can predict tumor behavior is essential in breast cancer. • A panel of monoclonal antibodies was produced by hybridoma technology. • MAbs that reacted with surface antigens of immunizing cell line but not normal cells were selected. • Target was identified as NCAM1 by immunoprecipitation and mass spectrometry. • The anti-NCAM1 antibody has potential application in cancer diagnosis. Breast cancer is the most prevalent malignancy among women around the world such that more than 1,400,000 new cases are being diagnosed each year. Despite immense studies over many years on diagnosis and treatment of breast cancer, about 30% of treated patients will relapse and require subsequent therapy. By development of hybridoma technology, murine monoclonal antibodies (MAbs) against several human tumor-associated antigens have been produced and characterized in many laboratories. The purpose of these studies is to generate effective monoclonal antibodies that could be useful in tumor diagnosis and therapy. In this study, splenic lymphocytes of immunized BALB/c mouse with a new established breast cancer cell line (Pari-ICR cell line, established in Shiraz Institute for Cancer Research) were fused with the mouse myeloma cell line SP2/0 in the presence of polyethylene glycol. We generated a panel of monoclonal antibodies against the newly established cell line. The hybrid cultures were screened by flow cytometry. Hybridomas that produced antibody to surface antigens of immunizing cell line but not to Human Gingival Fibroblasts, adipose stem cells, and leucocytes isolated from peripheral blood were selected and cloned by limiting dilution method. The 1E3 clone (IgG2a type) that displayed clonal stability was further analyzed for specificity by flow cytometry. MAb 1E3 showed weak to strong reactivity to other cell lines compared with Pari-ICR cell line. Antigen identification was performed by a workflow consisting of immunoaffinity purification, SDS-PAGE, Western blotting, and mass spectrometry analysis. The target of 1E3 mAb was identified as NCAM1. In conclusion, using the antibody-based strategy we identified NCAM1 as a potential therapeutic target and biomarker for breast cancer.

60 APPLIED LIFE SCIENCES↗

Benchmark CO 2 separation achieved by highly fluorinated nanoporous molecular sieve membranes from nonporous precursor via in situ cross-linking

Molecular sieve membranes with rigid micropores and CO 2 -philic functionalities within the architectures are promising candidates in CO 2 separation. However, the development of ctieve approaches for their fabrication still remains a significant challenge. In this study, an in situ cross-linking strategy is developed for the preparation of nanoporous fluorinated moleffecular sieve membranes using commercially available dense and non-porous polystyrene (M PS ) as a precursor template. Based on the dehydrative Friedel-Crafts reactions with highly fluorinated benzylic alcohols, M PS membranes are cross-linked in situ upon exposure to Brønsted acid (CF 3 SO 3 H), affording fluorinated microporous polymeric membranes with surface areas up to 523 m 2 g –1 and the presence of micropores centered at 1.1–1.3 nm as well as ultra-micropores (~0.6 nm). The obtained modified membranes exhibit good ideal CO 2 permeability of 797 barrer and CO 2 /N 2 selectivity of 28.5. In addition, high fluorine content (up to 28.5 wt%) and good thermal stability made the cross-linked membranes promising candidates to produce fluorinated carbon molecular sieve membranes with improved textural properties, exhibiting surface areas up to 1020 m 2 g –1 and ultra-micropores of ~0.4 nm. These membranes achieve superior CO 2 /N 2 separation performances exceeding the Robeson upper bound limit (2008).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of structural effects of aromatic compounds on sooting tendency with mechanistic insight into ethylphenol isomers

Small aromatic molecules with oxygen-containing functional groups are a promising class of fuel additives, as they can be readily sourced from depolymerized lignin. These oxygenated aromatic compounds (OACs) show a lower sooting tendency than aromatic hydrocarbons, but OACs having alkyl groups such as ethylphenol show a higher sooting tendency than other OACs such as phenol and anisole, despite the oxygen moiety. In this study, we investigate the relationship between chemical structure and soot precursor formation to explain observed differences in the sooting tendency of OACs and to gain insight into how alkyl or oxygenated substituents on the aromatic ring affect soot precursor formation. The weakest bond for 15 aromatic compounds was identified and cleavage of these bonds was shown to generate either benzyl or phenoxy radicals. A linear relationship between standard enthalpy of formation (ΔH f o ) of these radicals and the yield sooting index (YSI) was found, and thus ΔH f ° can be applied as a metric to estimate YSIs of various aromatic compounds; higher ΔH f o of a radical indicates an increase in the radical reactivity and leads to more soot precursor formation. Flow reactor experiments were performed for 2-ethylphenol and 3-ethylphenol to elucidate how ortho and meta substitution effects the sooting tendency. Soot precursors were identified from the experiment and their formation pathways were investigated computationally. 2-ethylphenol produces more oxygenated products than 3-ethylphenol since the ortho position has increased resonance stabilization of radical intermediates, which leads to lower YSI. Overall, these results further inform the selection of potential biomass-derived fuel blendstocks that have favorable sooting tendencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemiresistor sensor based on ion-imprinted polymer (IIP)-functionalized rGO for Cd(II) ions in water

This study reports the design and development of a novel chemiresistor (CR) sensor using ion imprinted polymer (IIP)-functionalized reduced graphene oxide (rGO) [IIP/rGO-CR] for cadmium ions (Cd(II)) determination in water. The sensor consisted of a CR transducer made of rGO channel bridging source and drain electrodes prepared by self-assembly and thermal reduction of graphene oxide (GO) on Au interdigitated electrodes chip fabricated on Si/SiO 2 substrate. The IIP was then grafted on rGO using surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization with polyethylenimine (PEI) and methylacrylic acid (MAA) as dual functional monomers and Cd(II) ions as template through UV light-initiated copolymerization. The IIP functionalized on rGO acted as an effective recognition element that modulated the resistance of rGO-CR upon binding of Cd(II), enabling Cd(II) detection at ppb level in aqueous solutions. The prepared IIP/rGO-CR sensor worked effectively in the linear range of 2~200ppb and achieved a limit of detection (LOD) of 0.83 ppb, which is lower than the World Health Organization guidelines of 3ppb for drinking water quality. The developed sensor of IIP/rGO-CR showed a high selectivity against a variety of trace and heavy metal ions found in water and good stability for up to 60 days when stored at room temperature for Cd(II) determination in water. Further, the sensor was successfully applied to analyzing Cd(II) spiked in tap, lake and river waters with a 94.5%–113.5% recovery, demonstrating a high degree of accuracy even in complex water samples. Finally, our results illustrated that the CR sensor of IIP functionalized rGO provides a potential platform for sensitive, robust and low-cost environmental analysis of Cd(II) in water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗