Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Surface interactions and high-voltage current collection

Spacecraft of the future will be larger and have higher power requirements than any flown to date. For several reasons, it is desirable to operate a high power system at high voltage. While the optimal voltages for many future missions are in the range 500 to 5000 volts, the highest voltage yet flown is approximately 100 volts. The NASCAP/LEO code is being developed to embody the phenomenology needed to model the environmental interactions of high voltage spacecraft. Some plasma environment are discussed. The treatment of the surface conductivity associated with emitted electrons and some simulations by NASCAP/LEO of ground based high voltage interaction experiments are described.

Mandell, M. J.↗

Analytical and Experimental Evaluation of the Heat Transfer Distribution over the Surfaces of Turbine Vanes

Three airfoil data sets were selected for use in evaluating currently available analytical models for predicting airfoil surface heat transfer distributions in a 2-D flow field. Two additional airfoils, representative of highly loaded, low solidity airfoils currently being designed, were selected for cascade testing at simulated engine conditions. Some 2-D analytical methods were examined and a version of the STAN5 boundary layer code was chosen for modification. The final form of the method utilized a time dependent, transonic inviscid cascade code coupled to a modified version of the STAN5 boundary layer code featuring zero order turbulence modeling. The boundary layer code is structured to accommodate a full spectrum of empirical correlations addressing the coupled influences of pressure gradient, airfoil curvature, and free-stream turbulence on airfoil surface heat transfer distribution and boundary layer transitional behavior. Comparison of pedictions made with the model to the data base indicates a significant improvement in predictive capability.

Hylton, L. D.↗

External tank chill effect on the space transportation system launch pad environment

The external tank (ET) of the STS contains liquid oxygen and liquid hydrogen as oxidizer and fuel for the SSMEs. Once the cryogen have been loaded into the ET, the temperature of the air surrounding the STS is chilled by the cold outer surface of the ET. This paper describes a two-dimensional flow and thermal analysis to determine this chill effect on the STS launch pad environment subsequent to the ET loading operation. The analysis was done assuming winter conditions and a northwest wind direction. An existing CFD code, PHOENICS '81, was used in the study. The results are presented as local and average values of the heat transfer coefficient, the Nusselt number, and the surface temperature around the redesigned solid rocket motors (RSRMs) and the ET. The temperature depression caused by the ET chilling of the air in the vicinity of the RSRMs was calculated to be 3 F below the ambient. This compares with the observed 1-2 F RSRM surface temperature depression based upon measurements made prior to the winter flight of STS-29. Since the surface temperature would be expected to be slightly higher than the local air temperature, the predicted temperature depression of the air appears to be substantiated.

Ahmad, R. A.↗

Production of a water quality map of Saginaw Bay by computer processing of LANDSAT-2 data

Surface truth and LANDSAT measurements collected July 31, 1975, for Saginaw Bay were used to demonstrate a technique for producing a color coded water quality map. On this map, color was used as a code to quantify five discrete ranges in the following water quality parameters: (1) temperature, (2) Secchi depth, (3) chloride, (4) conductivity, (5) total Kjeldahl nitrogen, (6) total phosphorous, (7)chlorophyll a, (8) total solids and (9) suspended solids. The LANDSAT and water quality relationship was established through the use of a set of linear regression equations where the water quality parameters are the dependent variables and LANDSAT measurements are the independent variables. Although the procedure is scene and surface truth dependent, it provides both a basis for extrapolating water quality parameters from point samples to unsampled areas and a synoptic view of water mass boundaries over the 3000 sq. km bay area made from one day's ship data that is superior, in many ways, to the traditional machine contoured maps made from three day's ship data.

Mckeon, J. B.↗

Application of the kappa-omega Turbulence Model to Quasi-Three-Dimensional Turbomachinery Flows

Many computational fluid dynamics codes for turbomachinery use the Baldwin-Lomax (B-L) turbulence model. It is easy to implement in two dimensions and works well for predicting overall turbomachinery performance. However, it is awkward to implement in three dimensions, often has difficulty finding the length scale, has a crude transition model, and neglects freestream turbulence, surface roughness, and mass injection. The kappa-omega model developed by Wilcox is an appealing alternative for several reasons. First, it is the only two-equation model that can be integrated to the wall without requiring damping functions or the distance to the wall, and hence, should behave well numerically. Second, the effects of freestream turbulence, surface roughness, and mass injection are easily included in the model. Finally, transition can be simulated using the low Reynolds number version of the model. Menter applied the kappa-model to external flows and showed very good results for flows with adverse pressure gradients. Liu and Zheng described their implementation of the kappa-model in a cascade code that included an area change term to account for endwall convergence. They validated the model for a flat plate, and compared the B-L and kappa-models to measured surface pressures for a low-pressure turbine cascade. Since they did not use the low Reynolds number version of the model, their results showed problems resulting from early transition. In this Note the low Reynolds number kappa-model was incorporated in the author's quasi-three-dimensional turbomachinery analysis code. The code includes the effects of rotation, radius change, and stream-surface thickness variation, and also includes the B-L turbulence model. The kappa-omega model was implemented using many of Menter's recommendations and an implicit approximate-factorization scheme described by Baldwin and Barth. The model was tested for a transonic compressor with rotation and variable stream-surface radius and height, and for a transonic turbine vane with transition and heat transfer. Results were compared to the B-L model and to experimental data.

Chima, Rodrick V.↗

Response Surface Methodology: An Extensive Potential to Optimize in vivo Photodynamic Therapy Conditions

Purpose: Photodynamic therapy (PDT) is based on the interaction of a photosensitizing (PS) agent, light, and oxygen. Few new PS agents are being developed to the in vivo stage, partly because of the difficulty in finding the right treatment conditions. Response surface methodology, an empirical modeling approach based on data resulting from a set of designed experiments, was suggested as a rational solution with which to select in vivo PDT conditions by using a new peptide-conjugated PS targeting agent, neuropilin-1. Methods and Materials: A Doehlert experimental design was selected to model effects and interactions of the PS dose, fluence, and fluence rate on the growth of U87 human malignant glioma cell xenografts in nude mice, using a fixed drug-light interval. All experimental results were computed by Nemrod-W software and Matlab. Results: Intrinsic diameter growth rate, a tumor growth parameter independent of the initial volume of the tumor, was selected as the response variable and was compared to tumor growth delay and relative tumor volumes. With only 13 experimental conditions tested, an optimal PDT condition was selected (PS agent dose, 2.80 mg/kg; fluence, 120 J/cm{sup 2}; fluence rate, 85 mW/cm{sup 2}). Treatment of glioma-bearing mice with the peptide-conjugated PS agent, followed by the optimized PDT condition showed a statistically significant improvement in delaying tumor growth compared with animals who received the PDT with the nonconjugated PS agent. Conclusions: Response surface methodology appears to be a useful experimental approach for rapid testing of different treatment conditions and determination of optimal values of PDT factors for any PS agent.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A Solid of Revolution Time Study using COG11.1 and MCNP6.1

The performance of two continuous energy Monte Carlo transport codes, COG11.1 and MCNP6.1, has been compared for the {sup 239}Pu Jezebel Benchmark using cross sections based on the ENDF/B-VII.1 evaluated nuclear data library. The purpose of this study is to determine the length of time it takes each code to complete a series of criticality calculations, using two different methods to model a solid of revolution. A solid of revolution is essential in many fields of engineering and mathematics, and has been a standard feature in computer-aided design and manufacturing since the 1970's. In the field of criticality safety, a solid of revolution can be used to reproduce and simplify complex engineering drawings and systems that would otherwise require excessive use of geometric primitives and computational resources to achieve a comparable level of fidelity. There are two basic methods to model a solid of revolution: Method 1 (COG) specifies a set of x-y pairs or polar coordinates and rotate the curve about the x-axis. Method 2 (COG and MCNP) creates a set of end-to-end conical frustums and/or cylinders. Method 1 is only available in COG and can be implemented using one surface and sector specification. Method 2 can be implemented in both COG and MCNP. This time study was initially conceived as a result of criticality safety analysis performed for a complex system with a high degree of rotational symmetry. Each COG input deck typically took 1-2 days to run in serial mode. COG input decks were then converted to MCNP format and run on the same computer cluster. Instead of expected 1-2 day runtimes, it took MCNP6.1 more than one week to complete each run. Since MCNP typically runs faster than many codes, these lengthy runtimes were considered unusual. This study attempts to investigate the runtime discrepancy between the two codes. The methods and benchmark in this time study were selected to provide a consistent, generalized approach to modeling an arbitrary solid of revolution. While there are many different ways to model the {sup 239}Pu Jezebel Benchmark, the focus of this study is on investigating the practical difference between the two basic methods to model a surface of revolution. Throughout this study, the only code that maintains reasonably low runtimes is COG11.1 (Method 1). Based on the observed performance of each code and method, it is likely that the divergent runtimes are the result of tracking particles across planes that lie between conical frustums, as opposed to defining the object boundary as a single surface. Slight fluctuations in graphed results were also observed, due to random sampling and CPU loading. This was confirmed by re-running input decks and comparing average runtimes to a preliminary curve fit. From the perspective of a criticality safety analyst, the results of this study are expected to contribute towards understanding one of the practical trade-offs between codes and methods as they apply to real-world analysis. Ultimately, it's about choosing the right tool for the job.

97 MATHEMATICS AND COMPUTING↗

WHONDRS 48 Hour Diel Cycling Study at the Nisqually River, WA

This dataset is from a sampling campaign completed over the course of 48 hours to investigate the effects of glacial freeze/thaw cycle-induced water level variation on aqueous chemistry, dissolved organic matter chemistry, and metabolic potential of microbial communities at the Nisqually River, WA, USA. Filtered surface water (SW) and pore water (PP) samples were collected every three hours in August 2018. This dataset is one of seven companion datasets that were part of the WHONDRS 48 Hour Diel Cycling Study of freshwater rivers. All seven datasets are available on ESS-DIVE; they can be found by searching for WHONDRS 48 Hour.This package contains a variety of chemical and hydrologic variables. All data types are provided in a standard format. Basic geochemistry analyses (e.g., non-purgeable organic carbon concentration, cations, anions, SpC, pH) were conducted, standardized photos were taken, surface water hydrographs were collated from existing instrumentation, and extensive metadata were captured. Aqueous chemistry variables include USGS codes in the first portion of the variable name (e.g., 00940_Cl_mg_per_L). These codes allow for interoperability with USGS water quality data. In addition, samples were delivered to the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory) for high resolution characterization of dissolved organic matter via 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). The data package contains instructions to process the FTICR data based on the user’s specific needs, and sample-level summary indices derived from the FTICR data will be added to the data package. Beyond the data in this data package, metagenomic data are being generated on associated microbial communities. When these data are available, the data package will be updated with information on accessing them. Please contact WHONDRS@pnnl.gov for more information. Please use the data package’s DOI to cite the data package. We ask that you email us at WHONDRS@pnnl.gov to let us know that you're using the data and acknowledge WHONDRS and the U.S. Department of Energy's Subsurface Biogeochemical Research program—which generously provides funding to WHONDRS—in your publications, proposals, presentations, etc. All data are free to be used for any purpose, such as for manuscripts, presentations, and grant proposals. Note that the included hydrograph has a separate DOI that should also be cited. There is no obligation to include WHONDRS members as co-authors.

54 ENVIRONMENTAL SCIENCES↗

Aerodynamic design for improved maneuverability by the use of three-dimensional transonic theory

This study has examined the level of transonic maneuver performance that can be achieved by the use of three-dimensional transonic theory. The FLO-27 code of Jameson and Caughey (1977) was used to lower maneuver drag by the reduction of shock strength on the wing upper surface. A design procedure was used to provide a set of guidelines for the iterative application of FLO-27 during the wing design process. The fighter configuration utilized had a leading-edge sweep of 45 deg and an aspect ratio of 3.28. Tests were conducted at Mach numbers from 0.60 to 0.95 and angles of attack from -5 to 18 deg. The accurate prediction of wing shock systems required the inclusion of fuselage effects in the theory. The FLO-27 code gave a reasonable estimate of the experimental wing pressure distributions at transonic maneuver conditions in the region of the wing where the flow was attached. For Mach numbers between 0.60 and 0.95 and lift coefficients near 0.9, a wing designed by the use of FLO-27 showed substantially lower drag than an empirically developed, supercritical maneuver wing and a maneuver wing designed primarily by two-dimensional transonic theory. For some maneuver conditions, the drag of the two-dimensional design was somewhat lower.

Mann, M. J.↗

Thin Film Sensors for Surface Measurements

Advanced thin film sensors that can provide accurate surface temperature, strain, and heat flux measurements have been developed at NASA Glenn Research Center. These sensors provide minimally intrusive characterization of advanced propulsion materials and components in hostile, high-temperature environments as well as validation of propulsion system design codes. The sensors are designed for applications on different material systems and engine components for testing in engine simulation facilities. Thin film thermocouples and strain gauges for the measurement of surface temperature and strain have been demonstrated on metals, ceramics and advanced ceramic-based composites of various component configurations. Test environments have included both air-breathing and space propulsion-based engine and burner rig environments at surface temperatures up to 1100 C and under high gas flow and pressure conditions. The technologies developed for these sensors as well as for a thin film heat flux gauge have been integrated into a single multifunctional gauge for the simultaneous real-time measurement of surface temperature, strain, and heat flux. This is the first step toward the development of smart sensors with integrated signal conditioning and high temperature electronics that would have the capability to provide feedback to the operating system in real-time. A description of the fabrication process for the thin film sensors and multifunctional gauge will be provided. In addition, the material systems on which the sensors have been demonstrated, the test facilities and the results of the tests to-date will be described. Finally, the results will be provided of the current effort to demonstrate the capabilities of the multifunctional gauge.

Martin, Lisa C.↗

Development of the US3D Code for Advanced Compressible and Reacting Flow Simulations

Aerothermodynamics and hypersonic flows involve complex multi-disciplinary physics, including finite-rate gas-phase kinetics, finite-rate internal energy relaxation, gas-surface interactions with finite-rate oxidation and sublimation, transition to turbulence, large-scale unsteadiness, shock-boundary layer interactions, fluid-structure interactions, and thermal protection system ablation and thermal response. Many of the flows have a large range of length and time scales, requiring large computational grids, implicit time integration, and large solution run times. The University of Minnesota NASA US3D code was designed for the simulation of these complex, highly-coupled flows. It has many of the features of the well-established DPLR code, but uses unstructured grids and has many advanced numerical capabilities and physical models for multi-physics problems. The main capabilities of the code are described, the physical modeling approaches are discussed, the different types of numerical flux functions and time integration approaches are outlined, and the parallelization strategy is overviewed. Comparisons between US3D and the NASA DPLR code are presented, and several advanced simulations are presented to illustrate some of novel features of the code.

CFD↗

WHONDRS 48 Hour Diel Cycling Study at the Columbia River in Washington, USA

This dataset is from a sampling campaign completed over the course of 48 hours to investigate the effects of the upstream Priest Rapids Dam-induced water level variation on aqueous chemistry, dissolved organic matter chemistry, and metabolic potential of microbial communities at the Columbia River, WA, USA. Filtered surface water (SW) and pore water (PP) samples were collected every three hours in August 2018. This dataset is one of seven companion datasets that were part of the WHONDRS 48 Hour Diel Cycling Study of freshwater rivers. All seven datasets are available on ESS-DIVE; they can be found by searching for WHONDRS 48 Hour.This package contains a variety of chemical and hydrologic variables. All data types are provided in a standard format. Basic geochemistry analyses (e.g., non-purgeable organic carbon concentration, cations, anions, SpC, pH) were conducted, standardized photos were taken, surface water hydrographs were collated from existing instrumentation, and extensive metadata were captured. Aqueous chemistry variables include USGS codes in the first portion of the variable name (e.g., 00940_Cl_mg_per_L). These codes allow for interoperability with USGS water quality data. In addition, samples were delivered to the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory) for high resolution characterization of dissolved organic matter via 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). The data package contains instructions to process the FTICR data based on the user’s specific needs, and sample-level summary indices derived from the FTICR data will be added to the data package. Beyond the data in this data package, metagenomic data are being generated on associated microbial communities. When these data are available, the data package will be updated with information on accessing them. Please contact WHONDRS@pnnl.gov for more information. Please use the data package’s DOI to cite the data package. We ask that you email us at WHONDRS@pnnl.gov to let us know that you're using the data and acknowledge WHONDRS and the U.S. Department of Energy's Subsurface Biogeochemical Research program—which generously provides funding to WHONDRS—in your publications, proposals, presentations, etc. All data are free to be used for any purpose, such as for manuscripts, presentations, and grant proposals. There is no obligation to include WHONDRS members as co-authors.

54 ENVIRONMENTAL SCIENCES↗

WHONDRS 48 Hour Diel Cycling Study at the Jordan River, Israel

This dataset is from a sampling campaign completed over the course of 48 hours to investigate the effects of groundwater pumping induced water level variation on aqueous chemistry, dissolved organic matter chemistry, and metabolic potential of microbial communities at the Jordan River, Israel. Filtered surface water (SW) and pore water (PP) samples were collected every three hours in August 2018. This dataset is one of seven companion datasets that were part of the WHONDRS 48 Hour Diel Cycling Study of freshwater rivers. All seven datasets are available on ESS-DIVE; they can be found by searching for WHONDRS 48 Hour.This package contains a variety of chemical and hydrologic variables. All data types are provided in a standard format. Basic geochemistry analyses (e.g., non-purgeable organic carbon concentration, cations, anions, SpC, pH) were conducted, standardized photos were taken, surface water hydrographs were collated from existing instrumentation, and extensive metadata were captured. Aqueous chemistry variables include USGS codes in the first portion of the variable name (e.g., 00940_Cl_mg_per_L). These codes allow for interoperability with USGS water quality data. In addition, samples were delivered to the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory) for high resolution characterization of dissolved organic matter via 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). The data package contains instructions to process the FTICR data based on the user’s specific needs, and sample-level summary indices derived from the FTICR data will be added to the data package. Beyond the data in this data package, metagenomic data are being generated on associated microbial communities. When these data are available, the data package will be updated with information on accessing them. Please contact WHONDRS@pnnl.gov for more information. Please use the data package’s DOI to cite the data package. We ask that you email us at WHONDRS@pnnl.gov to let us know that you're using the data and acknowledge WHONDRS and the U.S. Department of Energy's Subsurface Biogeochemical Research program—which generously provides funding to WHONDRS—in your publications, proposals, presentations, etc. All data are free to be used for any purpose, such as for manuscripts, presentations, and grant proposals. There is no obligation to include WHONDRS members as co-authors.

54 ENVIRONMENTAL SCIENCES↗

WHONDRS 48 Hour Diel Cycling Study at the Erpe River, Germany

This dataset is from a sampling campaign completed over the course of 48 hours to investigate the effects of wastewater treatment plant effluent induced water level variation on aqueous chemistry, dissolved organic matter chemistry, and metabolic potential of microbial communities at the Erpe River, Germany. Filtered surface water (SW) and pore water (PP) samples were collected every three hours in September 2018. This dataset is one of seven companion datasets that were part of the WHONDRS 48 Hour Diel Cycling Study of freshwater rivers. All seven datasets are available on ESS-DIVE; they can be found by searching for WHONDRS 48 Hour.This package contains a variety of chemical and hydrologic variables. All data types are provided in a standard format. Basic geochemistry analyses (e.g., non-purgeable organic carbon concentration, cations, anions, SpC, pH) were conducted, standardized photos were taken, surface water hydrographs were collated from existing instrumentation, and extensive metadata were captured. Aqueous chemistry variables include USGS codes in the first portion of the variable name (e.g., 00940_Cl_mg_per_L). These codes allow for interoperability with USGS water quality data. In addition, samples were delivered to the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory) for high resolution characterization of dissolved organic matter via 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). The data package contains instructions to process the FTICR data based on the user’s specific needs, and sample-level summary indices derived from the FTICR data will be added to the data package. Beyond the data in this data package, metagenomic data are being generated on associated microbial communities. When these data are available, the data package will be updated with information on accessing them. Please contact WHONDRS@pnnl.gov for more information. Please use the data package’s DOI to cite the data package. We ask that you email us at WHONDRS@pnnl.gov to let us know that you're using the data and acknowledge WHONDRS and the U.S. Department of Energy's Subsurface Biogeochemical Research program—which generously provides funding to WHONDRS—in your publications, proposals, presentations, etc. All data are free to be used for any purpose, such as for manuscripts, presentations, and grant proposals. There is no obligation to include WHONDRS members as co-authors.

54 ENVIRONMENTAL SCIENCES↗

WHONDRS 48 Hour Diel Cycling Study at the East Fork Poplar Creek in Tennessee, USA

This dataset is from a sampling campaign completed over the course of 48 hours to investigate the effects of wastewater treatment plant effluent induced water level variation on aqueous chemistry, dissolved organic matter chemistry, and metabolic potential of microbial communities at the East Fork Poplar Creek, TN, USA. Filtered surface water (SW) and pore water (PP) samples were collected every three hours in August 2018. This dataset is one of seven companion datasets that were part of the WHONDRS 48 Hour Diel Cycling Study of freshwater rivers. All seven datasets are available on ESS-DIVE; they can be found by searching for WHONDRS 48 Hour.This package contains a variety of chemical and hydrologic variables. All data types are provided in a standard format. Basic geochemistry analyses (e.g., non-purgeable organic carbon concentration, cations, anions, SpC, pH) were conducted, standardized photos were taken, surface water hydrographs were collated from existing instrumentation, and extensive metadata were captured. Aqueous chemistry variables include USGS codes in the first portion of the variable name (e.g., 00940_Cl_mg_per_L). These codes allow for interoperability with USGS water quality data. In addition, samples were delivered to the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory) for high resolution characterization of dissolved organic matter via 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). The data package contains instructions to process the FTICR data based on the user’s specific needs, and sample-level summary indices derived from the FTICR data will be added to the data package. Beyond the data in this data package, metagenomic data are being generated on associated microbial communities. When these data are available, the data package will be updated with information on accessing them. Please contact WHONDRS@pnnl.gov for more information. Please use the data package’s DOI to cite the data package. We ask that you email us at WHONDRS@pnnl.gov to let us know that you're using the data and acknowledge WHONDRS and the U.S. Department of Energy's Subsurface Biogeochemical Research program—which generously provides funding to WHONDRS—in your publications, proposals, presentations, etc. All data are free to be used for any purpose, such as for manuscripts, presentations, and grant proposals. Note that the included hydrograph has a separate DOI that should also be cited. There is no obligation to include WHONDRS members as co-authors.

54 ENVIRONMENTAL SCIENCES↗

Effects of temperature-dependent molecular absorption coefficients on the thermal infrared remote sensing of the earth surface

The effect of temperature-dependent molecular absorption coefficients on thermal infrared spectral signatures measured from satellite sensors is investigated by comparing results from the atmospheric transmission and radiance codes LOWTRAN and MODTRAN and the accurate multiple scattering radiative transfer model ATRAD for different atmospheric profiles. The sensors considered include the operational NOAA AVHRR and two research instruments planned for NASA's Earth Observing System (EOS): MODIS-N (Moderate Resolution Imaging Spectrometer-Nadir-Mode) and ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer). The difference in band transmittance is as large as 6 percent for some thermal bands within atmospheric windows and more than 30 percent near the edges of these atmospheric windows. The effect of temperature-dependent molecular absorption coefficients on satellite measurements of sea-surface temperature can exceed 0.6 K. Quantitative comparison and factor analysis indicate that more accurate measurements of molecular absorption coefficients and better radiative transfer simulation methods are needed to achieve SST accuracy of 0.3 K, as required for global numerical models of climate, and to develop land-surface temperature algorithms at the 1-K accuracy level.

Wan, Zhengming↗

ANALYSIS OF THE MSL/MEDLI ENTRY DATA WITH COUPLED CFD AND MATERIAL RESPONSE.

The Mars Science Laboratory (MSL) was protected during its atmospheric entry by an instrumented heat-shield using NASA's Phenolic Impregnated Carbon Ablator (PICA) material. PICA is a lightweight carbon fiber/polymeric resin material that offers out-standing performances for protecting probes during planetary entry. The Mars Entry Descent and Landing Instrument (MEDLI) suite on MSL offers unique in-flight validation data for models of material response and atmospheric entry. MEDLI recorded, among other things, time-resolved in-depth temperature data of PICA using thermocouple sensors assembled in the MEDLI Integrated Sensor Plugs (MISP). The objective of this work is to showcase and analyze the coupling between the material response and the aerothermal environment. As shown in Figure 1, the workflow is divided into the following steps. First, the aerothermal properties are computed in the Data Parallel Line Relaxation (DPLR) code [3] and used with the Nonequilibrium air radiation (NEQAIR) program [8] to compute radiative heating. Second, the thermal response inside the material is computed in the Porous material Analysis Toolbox based on Open-FOAM (PATO) using a fixed blowing correction parameter. Third, the pyrolysis gases computed in PATO are used as inputs to a blowing boundary condition within DPLR. Fourth, the new environment properties from DPLR are used in NEQAIR to provide an updated solution, then both the updated aerothermal environment and radiative heating are used in PATO without blowing correction. The third and fourth steps are then repeated until convergence in surface temperature is obtained. Convergence in the radiative heating is generally achieved before surface temperature, at which point the radiative heating is no longer updated. Char mass loss rates are forced to zero to produce a non-receding surface condition. For early time points in the trajectory, where flow around the MSL aeroshell is rarefied, the Direct Simulation Monte Carlo (DSMC) code, SPARTA, is used to compute the aerothermal environment. Iteration between PATO and SPARTA is not performed due to the computational cost of DSMC simulations. Preliminary results of the coupling between PATO and DPLR for the MSL heatshield atmospheric entry model are presented in Figures 2-4 at 65 seconds after entry interface. Figure 2 shows the surface temperature results from an uncoupled simulation in PATO with the blowing correction parameter applied (left) along with the coupled surface temperature after iteration (right). Figure 3 shows the surface temperature along the centerline from windward to leeward for easier comparison. Figure 4 shows the coupled and uncoupled pyrolysis gas blowing rate. Mars 2020 used a similar heatshield consisting of PICA for thermal protection during entry, descent, and landing. In preparation for Mars 2020 post-flight analysis, the predictive material response capability is benchmarked against flight data from MEDLI. This work represents an important milestone toward the development of validated predictive capabilities for designing thermal protection systems for planetary probes.

Mars Science Laboratory↗

A User''s Guide to the Zwikker-Kosten Transmission Line Code (ZKTL)

This user's guide documents updates to the Zwikker-Kosten Transmission Line Code (ZKTL). This code was developed for analyzing new liner concepts developed to provide increased sound absorption. Contiguous arrays of multi-degree-of-freedom (MDOF) liner elements serve as the model for these liner configurations, and Zwikker and Kosten's theory of sound propagation in channels is used to predict the surface impedance. Transmission matrices for the various liner elements incorporate both analytical and semi-empirical methods. This allows standard matrix techniques to be employed in the code to systematically calculate the composite impedance due to the individual liner elements. The ZKTL code consists of four independent subroutines: 1. Single channel impedance calculation - linear version (SCIC) 2. Single channel impedance calculation - nonlinear version (SCICNL) 3. Multi-channel, multi-segment, multi-layer impedance calculation - linear version (MCMSML) 4. Multi-channel, multi-segment, multi-layer impedance calculation - nonlinear version (MCMSMLNL) Detailed examples, comments, and explanations for each liner impedance computation module are included. Also contained in the guide are depictions of the interactive execution, input files and output files.

Kelly, J. J.↗