Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

EFFECTS OF CATHODE SHAPES ON BEP AND EP DURING VERTICAL SURFACE TREATMENTS ON NIOBIUM

Minimization of field emission on the inner surfaces of niobium (Nb) superconducting radio frequency (SRF) cavities is highly desirable for SRF community. Previous experimental results [1] seemed to imply that the threshold of field emission was related to the thickness of Nb surface oxide layers. In this contribution, a more detailed study on the influences of the surface oxide layers on the field emission on Nb surfaces will be reported. By anodization technique, the thickness of the surface pentoxide layer was varied from 3nm up to 460nm. These samples were measured by means of a home-made scanning field emission microscope (SFEM). The emitters detected by SFEM were characterized using a scanning electron microscope together with an energy dispersive x-ray analyzer. Attempts were made to try to correlate the results from SFEM measurements with surface morphology and oxide thickness of Nb samples and chemical composition and geographic shape of the emitters. The SFEM results were also analyzed employing a model based on the classic electromagnetic theory. Possibly implications for Nb SRF cavity applications from this study will be discussed. 1: A.T. Wu et al, Proceedings of IPAC 2010, Kyoto, Japan, WEPEC081

Wu, Andy↗

Development of Zeolite Nonwoven for the Adsorption of Radioactive Cesium - 13288

The zeolite nonwoven fabric produced by TDS (Totally Dry System) process has some advantages such as the control of zeolite content, flexibility, strength and water-resistant property depending on the purpose. Hence the zeolite nonwoven fabric is expected for the application in various fields of the decontamination of Cs-contaminated water. In this study, Cs adsorption properties of zeolite nonwoven fabrics were examined by batch experiments, and the radiation stability, thermal stability and chemical durability were evaluated. As for batch adsorption properties, relatively large uptake rate of Cs{sup +} was obtained; the uptake equilibrium attained within 20 min and the uptake (%) was above 95%. The differences in zeolite content had no effects on the Cs{sup +} uptake (%). The uptake (%) of Cs{sup +} in seawater was slightly lowered compared to that in the presence of HNO{sub 3}. The uptake (%) of Cs{sup +} in seawater was estimated to be above 90% after 2 h-shaking, indicating the considerable enhancement of uptake rate compared to the conventional granular zeolites. The uptake (%) of Cs{sup +} for the zeolite high content type was estimated to be above 99% by using {sup 137}Cs tracer. As for the comparison of sealing treatment, the uptake (%) for the zeolite sheet treated with edge sealing was larger than that with rapping treatment. The uptake (%) for the zeolite sheet (zeolite high content type) was estimated to be about 95%, which is independent of sealing treatment and NaOH concentration. As for the stability, the surface morphology and the structure of zeolite sheet were not altered by the treatment with acid and alkaline solutions under the experimental conditions. The zeolite sheets were also stable after {sup 60}Co-γ ray irradiation up to 7.01x10{sup 6} R. On the other hand, color change for both fiber and zeolite and the shrinkage of the fiber were observed after heat treatment at 150 deg. C for 2 h. Thus the considerable enhancement of adsorption properties was observed by using zeolite nonwoven fabrics compared to the conventional granular zeolites. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Accelerated Aging of PV Cables - The Development of Methods Towards Combined-Accelerated Stress Testing

PV cables allow the collection and distribution of electricity from modules to the energy grid. Durable cabling allows continuous operation of PV installations. Cables with a life less than that of the modules must be replaced - reducing electricity generation and adding to the system operating expense. We have examined the durability of a variety of representative cable samples using artificial UV weathering (IEC TS 62788-7-2) and combined accelerated stress testing (C-AST). Jackets in this study include PV-rated (polyolefin), building wire (PVC/PA), and multi-conductor (rubber, as in PV trackers), with some examples of black and red cables. Characterizations at read points include appearance (camera and optical microscope), surface roughness (linear profilometry), instrumented indentation, surface morphology (SEM), chemical composition (EDS), thermal decomposition (TGA), phase transition (DSC), crystalline structure (WAXS), and polymer chemical structure (FTIR). Complimentary examinations confirm damage to the external and interior layer(s) of less durable samples, including changes in morphology (e.g., cracking), chemistry (e.g., oxidation), structure, and mechanical performance (e.g., through-thickness modulus and hardness). The results may be generally compared to other examples from the field (PV installations) or after accelerated testing (IEC 61215). The methods in this study are presently being applied in a follow-on C-AST study, incorporating both dynamic and kinematic fixtures.

balance of systems↗

Sodium silicate treatment for uranium (vi) bearing groundwater systems at f/h area at savannah river site - 15709

The Savannah River Site (SRS) was one of the most significant manufacturing facilities during the Cold War era for producing nuclear materials. At the end of the Cold War, the Site's mission changed to support the environmental restoration of the Site due to over six decades of research, development, and production of nuclear weapons. Currently SRS is a major hazardous waste management facility responsible for nuclear materials storage, and remediation of contaminated soil and groundwater from radionuclides. This research focuses on controlling the mobilization of the contaminants, specifically uranium (VI) located in groundwater plumes at the Site's F/H Area Seepage Basin, where approximately 1.8 billion gallons of hazardous waste were deposited. Objective: To evaluate the potential use of sodium silicate for uranium removal from the aqueous phase, as well as to restore the pH of the treatment zone. Adding sodium silicate increases the pH of the treatment zone and uranium precipitation is achieved, therefore immobilizing the contaminant. Through a series of experiments the optimal concentration of sodium silicate was investigated. Part 1: An experiment was conducted in order to determine the effect of sodium silicate on the pH of a solution containing Savannah River Site soil and synthetic groundwater replicated after the Site's natural groundwater composition. Each sample was spiked with the appropriate volume from the sodium silicate stock solution in order to achieve final desired sodium silicate concentrations of 10, 20, 40,50,60,70, and 80 parts per million. The samples were placed on a platform shaker for three days during which pH readings were collected in regular intervals to determine which silicate concentration produced a pH in the neutral range (6 > pH < 8). Part 2: A sequential experiment was conducted specifically using 40 and 50 ppm of sodium silicate with Savannah River Site soil, synthetic groundwater, and 0.5 ppm of uranium (VI), in order to investigate the removal of uranium in the aqueous phase via precipitation. Samples were extracted and categorized into a filtered and non-filtered control group. Each sample was diluted 1:20 with 1% nitric acid and analyzed using the Kinetic Phosphorescence Analyzer (KPA) in order to measure uranium concentrations in the supernatant. By measuring the concentration of uranium in the supernatant the percent removal is obtained for the comparison between the filtered and non-filtered samples, revealing the amount of uranium precipitation that occurred for each silicate concentration. Results: A sodium silicate concentration of between 40-50 ppm proved ideal for achieving uranium precipitation and creating a circum-neutral pH environment in the aqueous phase. 50 ppm achieved the larger percent of uranium precipitation with a range of 30-50% removal for the filtered samples and between 60-95% removal for the non-filtered samples. A large difference between the removal of filtered and non- filtered samples from the same day was observed for both sodium silicate concentrations tested, indicating that there is a considerable amount of uranium species retained in the filter. The addition of sodium silicate proved effective in the removal of uranium precipitation from the aqueous phase. Future work: Determine potential re-solubilization of uranium concentrations; Examine mineralogy and surface morphology of dried precipitate using XRD and SEM/EDS.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Performance and Stability of HyBRID Process - 19115

The HyBRID (Hydrazine Base Reductive metal Ion Decontamination) process shows good decontamination performance on radioactively contaminated specimens gathered from Hanul nuclear power plant and from the HANARO research reactor. The effect of γ-ray irradiation on the decomposition of decontamination solution is investigated. In an oxidation step, KMnO{sub 4} decomposes entirely when the absorbed dose exceeds 20 KGy. The addition of Cu{sup 2+} ion to SP retards slightly the decomposition of KMnO{sub 4}. Less than 20 % of hydrazine in the HyBRID solution, however, decomposes at 20 KGy. To treat the secondary waste generated from the HyBRID process by filtration, it is necessary to demonstrate the integrity of polypropylene filters by γ-ray irradiation. The absorbed dose is in the range of 0 KGy to 80 KGy. The variation of tensile strength and the variation of surface morphology of the irradiated PP filters are investigated. The mechanical test results show that the filters can be used safely in the test range. Hydrazine is decomposed into nitrogen and water by hydrogen peroxide. Tests on the decomposition of hydrazine by a hydrogen peroxide solution are carried out by varying the solution pH in the temperature range between 50 deg. C and 70 deg. C. The decomposition of hydrazine becomes effective as the increase of pH and the repetitive injections of hydrogen peroxide, and hydrazine is satisfactorily decomposed. The effect of copper ion on the decomposition of hydrazine is negligible. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Preliminary Analysis of Damage to MPFDs Caused by Reactor Pulses

The need for next-generation, accident-tolerant fuels has generated significant interest in the restart of domestic fuels testing at the Transient Reactor Test (TREAT) facility. The TREAT reactor is designed to produce large, transient fluxes that replicate the effects of a wide variety of accident conditions on an irradiated fuel sample. Peak powers generated during short pulses approach 20 GW with a neutron flux of approximately 10{sup 17} n cm{sup -2} s{sup -1}. As part of the restart effort, new vehicle designs are being explored for sample irradiation, including the Static Environment Rodlet Transient Test Apparatus (SERTTA) and variants. As part of the SERTTA designs, micro-pocket fission detectors (MPFDs) are being explored for localized flux measurements before, during, and after transient operations. These detectors are also being considered as part of future, core-wide instrumentation for the TREAT reactor. However, the high fluxes associated with the pulses in the TREAT core present certain thermodynamic concerns given their intensity and the amount of energy they will release within the MPFDs within such a short amount of time. Assuming each fission that occurs in a MPFD results in a fission fragment depositing 85 MeV of energy in the substrate on average and each MPFD has 0.5 μg of natural uranium deposited on it, a 100 ms long pulse in the TREAT reactor at 1017 n cm{sup -2} s{sup -1} flux will produce approximately 4.6 x 10{sup 6} fissions in an MPFD. This pulse deposits 6.3 x 10{sup -5} J in the substrate over a 100 ms duration. That amount of energy is sufficient to melt roughly 33% of the Pt under the UO{sub 2} deposition or a circular spot with a diameter of approximately 860 μm. Of course, the above estimate makes a number of simplifying assumptions and ignores heat transfer, but does serve to illustrate the point that this rapid heating effect could be detrimental to the integrity and life of these in-core MPFDs. To study how these layers are affected by large transient neutron fluxes, five samples were prepared, pre-analyzed, and then subjected to a pulse in the central thimble of the Kansas State University TRIGA Mark II reactor to a peak power of 1.58 GW. After being allowed to decay to safer radiation levels, the sample substrates and coatings were inspected using scanning electron microscopy (SEM) to identify any changes to their surface morphology. Indeed, certain changes were found and are discussed in greater detail in this paper.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Virtual Substrates for Wide Bandgap AlyX1-yN Growth

Lattice-matched substrates are critical for growth of high quality, compositionally-targeted ternary AlyX1-yN compounds with properties suitable for a wide variety of next-generation opto- and power electronic applications. [DOI:10.1149/2.0111702jss] We have identified the (111) plane of transition metal carbides and nitrides as lattice matched "virtual" substrate layers that have additional benefits of electrical conductivity and appropriate coefficients of thermal expansion for nitride layer at both growth and operating temperatures. [arXiv:2208.11769 2022] In this work, (111)-oriented TaC and ZrN are grown by RF sputtering and optimized as substrate layers for AlyGa1-yN and AlyGd1-yN, respectively. TaC is demonstrated as a full proof of concept. (111)-stabilized TaC layers with a rock-salt crystal structure are annealed to improve surface crystal quality and surface morphology and then used as a template for growth of an Al0.7Ga0.3N layer by molecular beam epitaxy. X-ray diffraction (XRD) demonstrates epitaxial registry of the grown layer to the substrate. High resolution transmission electron microscopy (TEM) is used to investigate interface behavior, showing regions of abrupt interface transitions and nitrogen polar termination of the Al0.7Ga0.3N. We also grew (111)-oriented ZrN on Ti-Zr-N graded buffer layers as a lattice-matched virtual substrate for AlyGd1-yN. Structure, morphology, and strain are analyzed using XRD and atomic force microscopy. Structure and quality of initial Al0.8Gd0.2N thin films are investigated for both in-situ and ex-situ growths.

AlyX1-yN↗

Characterization of the degradation of gamma-irradiated elastomers using Raman spectroscopy

This report presents key findings from Raman spectroscopic analysis of gamma-irradiated rubber samples extracted from a laminated lead-damped rubber (LDR) seismic isolation device. The samples were exposed to gamma radiation from a 60Co source in a Foss Therapy Services gamma irradiator, reaching absorbed doses up to 1600 kGy. A distinct threshold near 400 kGy was identified, beyond which significant spectral changes were observed. Two Raman peaks - at approximately 425 cm-1 and 2440 cm-1 - were tracked as a function of dose using Gaussian fitting. The 425 cm-1 peak, attributed to sulfur–sulfur (S–S) bond stretching (resulting from vulcanization of the rubber), exhibited a dose-dependent upshift, indicating radiation-induced crosslinking within the sulfur-based polymer network. Conversely, the 2440 cm-1 peak, likely associated with vibrational modes of additives or impurities, showed a downward shift with increasing dose, suggesting chain scission and degradation of non-rubber constituents. These results provide first-of-a-kind insights into the microstructural evolution of elastomers under high-dose gamma irradiation and establish a preliminary dose threshold for significant degradation. Future work will incorporate multi-modal characterization—including Fourier Transform Infrared (FTIR) spectroscopy, scanning electrom microscopy (SEM) of the rubber surface morphology, thermogravimetric analysis (TGA) to determine changes in thermal stability, and mechanical testing—to correlate molecular-level changes with macroscopic performance of these elastomers as damping media in seismic isolation devices. These findings are expected to provide regulatory guidance and design criteria for qualifying low-damping rubber seismic isolators in advanced nuclear reactor applications.

36 - MATERIALS SCIENCE↗

Mapping of Proteomic Composition on the Surfaces of Bacillus spores by Atomic Force Microscopy-based Immunolabeling

Atomic force microscopy provides a unique capability to image high-resolution architecture and structural dynamics of pathogens (e.g. viruses, bacteria and bacterial spores) at near molecular resolution in native conditions. Further development of atomic force microscopy in order to enable the correlation of pathogen protein surface structures with specific gene products is essential to understand the mechanisms of the pathogen life cycle. We have applied an AFM-based immunolabeling technique for the proteomic mapping of macromolecular structures through the visualization of the binding of antibodies, conjugated with nanogold particles, to specific epitopes on Bacillus spore surfaces. This information is generated while simultaneously acquiring the surface morphology of the pathogen. The immunospecificity of this labeling method was established through the utilization of specific polyclonal and monoclonal antibodies that target spore coat and exosporium epitopes of Bacillus atrophaeus and Bacillus anthracis spores.

59 BASIC BIOLOGICAL SCIENCES↗

Direct observation of spin-like reaction fronts in planar energetic multilayer foils.

Propagating reactions in initially planar cobalt/aluminum exothermic multilayer foils have been investigated using high-speed digital photography. Real-time observations of reactions indicate that unsteady (spinlike) reaction propagation leads to the formation of highly periodic surface morphologies with length scales ranging from 1 {micro}m to 1 mm. The characteristics of propagating spinlike reactions and corresponding reacted foil morphologies depend on the bilayer thickness of multilayer foils.

36 MATERIALS SCIENCE↗

Distinct Surface and Bulk Morphology Due to Solvent Additive Effects in PM6 Conjugated Polymer Films

Depth dependent molecular orientation and crystalline structure in conjugated polymer thin films is critical for organic electronic device performance and is affected by solvent additive choice during processing. Here, in this work, we focus on the electron donor polymer PM6 and uncover how the solvent additive 1-chloronaphthalene (CN) affects the molecular orientation and the crystalline structure with near edge X-ray absorption fine structure (NEXAFS) spectroscopy and grazing-incidence wide-angle X-ray scattering (GIWAXS), respectively. By quantitatively comparing molecular and crystallite orientations, we find that CN induces distinct surface and bulk morphologies. The polymer conjugated plane orientation at the surface is unaffected by CN, while this orientation is strongly affected in the bulk. Further, we find differences in surface vs bulk crystalline coherence lengths and relative degrees of crystallinity. These insights help provide links between solvent additive and device performance and demonstrate the strengths of a quantitative approach for characterizing organic thin film morphology.

36 MATERIALS SCIENCE↗

Robustness of Optical Response for Self-Assembled Plasmonic Metamaterials with Morphological Disorder and Surface Roughness

Bottom-up fabrication of metallized biotemplated nanostructures to form specific plasmonic nanoresonators holds promise as a means of achieving large-scale optical metamaterials. However, in contrast to top-down methods, the stochastic growth of self-assembled nanoresonators is prone to significant disorder and surface roughness, which naturally raise an important question about the robustness of their resonant properties in terms of structural imperfections. An aggregated-random-sphere model is developed to mimic the nucleated growth of metallized DNA origami assembly, leading to meta-atoms with realistic, experimentally observed morphological disorder and surface roughness. Using the well-known split-ring-resonator (SRR) motif as an example, the resonant properties of meta-atoms under different levels of roughness are investigated and a strong tolerance of optical response against morphological disorder is revealed. It is found that in SRRs, even with dramatic roughness introduced, the expected resonances are still observed, despite broadening line shapes compared to ideal smooth structure. Only for extreme disorder, which causes drastic segmentation of SRRs, does the resonant response disappear. Finally, the demonstrations are very encouraging for the prospects of bottom-up fabrication toward versatile functional metamaterials and metadevices.

36 MATERIALS SCIENCE↗

Morphology of the surface of technically pure titanium VT1-0 after electroexplosive carbonization with a weighed zirconium oxide powder sample and electron beam treatment

Titanium is carbonized by the electroexplosive method. Formation of a surface alloyed layer and a coating on the treated surface is established by the methods of transmission electron microscopy. The morphology and elemental composition of the alloyed layer are analyzed. A dependence of the structure of the modified layer subjected to electron gun treatment on the absorbed power density is revealed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of fast mold surface temperature evolution on iPP part morphology gradients

The control of mold surface temperature is an important factor that affects the sample surface morphology as well as the structural gradients (orientation crystal size, and type) as well as cooling stresses. The frozen layer thickness formed during the filling stage also has a very significant effect on the flow resistance and thus on the resulting pressure drop and flow length in thin wall parts. The possibility to have a hot mold during filling and a quick cooling soon afterward is a significant process enhancement particularly for specialized applications such as micro injection molding and for the reproduction of micro structured surfaces. Up to now, several methods (electromagnetic, infrared, hot vapor fleshing etc,) were tried to achieve fast temperature evolution of the mold. Unfortunately, all these methods require a complex balance between thermal and mechanical problems, equipment cost, energy consumption, safety, molding cycle time and part quality achievable. In this work, a thin electrical resistance was designed and used to generate a fast and confined temperature variation on mold surface (by joule effect). Since the whole temperature evolution can take place in a few seconds, one can couple the advantages of a high surface temperature during filling with the advantages of a low mold temperature, fast cooling and low heating dissipation. Some experiments were performed with a commercial iPP resin. The effects of the surface temperature and of the heating time (under constant electric power) on surface finishing and on the final morphology (thickness and structure of the different layers) are explored and discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Predicting Surface Energies and Particle Morphologies of Boehmite (y-AlOOH) from Density Functional Theory

Particle morphology is an important property affecting the reactivity of solid phases. The aluminum oxyhydroxide boehmite (?-AlOOH) is one example for which particle morphology has relevance to geochemistry, environmental management, and catalysis. Morphologies can be predicted from surface and attachment energies obtained from electronic structure calculations but the dependence of these predictions on the level of theory and complexity of the physics involved has been overlooked. Density functional theory calculations were therefore performed for a wide range of exchange-correlation (XC) functionals, including a hybrid functional, to calculate the energetics of the four main low-index surfaces of boehmite both in vacuum and with a water monolayer adsorbed. The approximation used for describing core electrons, the size of the plane-wave basis set, and the need for dispersion corrections were also investigated. The results highlight the critical need for converged plane-wave basis sets to obtain accurate surface energies as well as the strong influence the XC functional can have on surface energies and water adsorption energies. The predicted morphologies were compared to particle morphologies obtained from a variety of synthesis routes both carried out in this work and published in the literature. The comparison showed that, at basic pH, growth morphologies dominated at low temperatures and short time periods whereas equilibrium morphologies were achieved as the temperature and/or aging time increased, which could be explained by the slow stacking growth mode of boehmite along the [010] direction. Finally, calorimetry experiments are often used to derive surface energies, but excess water on hydrophilic surfaces can add significant uncertainty. An approach for correcting the surface energetics obtained by calorimetry using electronic structure calculations is presented.

Prange, Micah P.↗

Reduction of nitric oxide by acetylene on Ir surfaces with different morphologies: Comparison with reduction of NO by CO

Reduction of nitric oxide (NO) by acetylene (C 2 H 2 ) has been investigated by temperature-programmed desorption (TPD) on planar Ir(210) and faceted Ir(210) with tunable sizes of three-sided nanopyramids exposing (311), (311), and (110) faces. Upon adsorption, C 2 H 2 dissociates to form acetylide (CCH) and H species on the Ir surfaces at low C 2 H 2 precoverage. For adsorption of NO on C 2 H 2 -covered Ir, both planar and faceted Ir(210) exhibit high reactivity for reduction of NO with high selectivity to N 2 at low C 2 H 2 precoverage, although the reaction is completely inhibited at high C 2 H 2 precoverage. Coadsorbed C 2 H 2 significantly influences dissociation of NO. The N-, H-, and C-containing TPD products are dominated by N 2 , H 2 , CO, and CO 2 together with small amounts of H 2 O. For adsorption of NO on C-covered Ir(210) at fractional C precoverage, formation of CO 2 is promoted while production of CO is reduced. Reduction of NO by C 2 H 2 is structure sensitive on faceted Ir(210) versus planar Ir(210), but no evidence is found for size effects in the reduction of NO by C 2 H 2 on faceted Ir(210) for average facet sizes of 5 nm and 14 nm. The results are compared with reduction of NO by CO on the same Ir surfaces. As for NO+C 2 H 2 , the Ir surfaces are very active for reduction of NO by CO with high selectivity to N 2 and the reaction is structure sensitive, but dear evidence is found for size effects in the reduction of NO by CO on the nanometer scale. Furthermore, coadsorbed CO does not affect dissociation of NO at low CO precoverage whereas coadsorbed CO considerably influences dissociation of NO at high CO precoverage. Finally, the adsorption sites of CCH+H on Jr are characterized by density functional theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron Physics in 3‐D Two‐Fluid 10‐Moment Modeling of Ganymede's Magnetosphere

Abstract We studied the role of electron physics in 3‐D two‐fluid 10‐moment simulation of Ganymede's magnetosphere. The model captures nonideal physics like the Hall effect, electron inertia, and anisotropic, nongyrotropic pressure effects. A series of analyses were carried out: (1) The resulting magnetic field topology and electron and ion convection patterns were investigated. The magnetic fields were shown to agree reasonably well with in situ measurements by the Galileo satellite. (2) The physics of collisionless magnetic reconnection were carefully examined in terms of the current sheet formation and decomposition of generalized Ohm's law. The importance of pressure anisotropy and nongyrotropy in supporting the reconnection electric field is confirmed. (3) We compared surface “brightness” morphology, represented by surface electron and ion pressure contours, with oxygen emission observed by the Hubble Space Telescope. The correlation between the observed emission morphology and spatial variability in electron/ion pressure was demonstrated. Potential extension to multi‐ion species in the context of Ganymede and other magnetospheric systems is also discussed.

Wang, Liang↗