Search NASA⌕ Search

SEARCH · Search NASA

Results for “theoretical developments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Experimental and Theoretical Studies of Pulsating Turbulent Flow

The objective of this investigation was to study the effects of small amplitude sinusoidal pulsations on fully developed turbulent flow in a tube from both experimental and theoretical viewpoints. Theoretical models for the macroscopic behavior of pulsating turbulent tube flow were developed for the two cases of very low and very high pulsation frequencies. The models are based on assumptions of quasi-steady and frozen eddy viscosity flow behavior, respectively. The models successfully predict unsteady velocity profiles, thereby supporting the currently proposed definitions of frequency regimes in pulsating turbulent flow. Experimental measurements were made of the time-dependent pressure drop and velocity profiles over the range of frequency-to-Reynolds number ratios from 0.0095 to 0.24. The two macroscopic models developed in this study predict unsteady velocity profiles which are in moderately good agreement with the experiments in their respective frequency regimes, and a previously developed quasi-steady model is found to predict experimental velocity profiles well in both the quasisteady and the frozen eddy viscosity frequency regimes. The effect of flow pulsations on the dissipation of turbulence energy in the vicinity of the wall was measured in the lower transition frequency regime. The long-time averaged dissipation was observed to be unchanged from the steady flow dissipation, within the accuracy of the experiment. A theoretical model of the periodic viscous sublayer was also developed and applied to pulsating flow in a tube, in order to investigate the effects of flow pulsations on the rate of production of turbulence in the region of the wall. The periodic viscous sublayer model predicts sublayer growth periods in steady flow which agree with the published experimental data. When the model is applied to pulsating flow, the response of the sublayer growth period falls into three frequency regimes, the parameters of which are in approximate agreement with the frequency regimes which are defined on the basis of macroscopic flow behavior. The sublayer renewal cycle exhibits quasi-steady flow behavior when the sublayer growth period is much less than the pulsation period, transition behavior when these two periods are approximately equal, and frozen eddy viscosity behavior when the sublayer period is much longer than the pulsation period. The effect of the sublayer growth and renewal cycle on the level of turbulence was investigated by two methods. The velocity fluctuations seen by a point velocity probe located close to the wall were predicted from the model in one method and the rate of turbulence production was estimated from the frequency of sublayer renewal events in the other.

Kingston, G. C.↗
NASA NTRS1993

A theoretical and experimental study of coplanar waveguide shunt stubs

A comprehensive theoretical and experimental study of straight and bent coplanar waveguide (CPW) shunt stubs is presented. In the theoretical analysis, the CPW is assumed to be inside a cavity while, the experiments are performed on open structures. For the analysis of CPW discontinuities with air-bridges, a hybrid technique was developed which was validated through extensive theoretical and experimental comparisons. The effect of the cavity resonances on the behavior of the stubs with and without air-bridges is investigated. In addition, the encountered radiation loss due to the discontinuities is evaluated experimentally.

Dib, Nihad I.↗
NASA NTRS1994

Cost estimating methods for advanced space systems

NASA is responsible for developing much of the nation's future space technology. Cost estimates for new programs are required early in the planning process so that decisions can be made accurately. Because of the long lead times required to develop space hardware, the cost estimates are frequently required 10 to 15 years before the program delivers hardware. The system design in conceptual phases of a program is usually only vaguely defined and the technology used is so often state-of-the-art or beyond. These factors combine to make cost estimating for conceptual programs very challenging. This paper describes an effort to develop parametric cost estimating methods for space systems in the conceptual design phase. The approach is to identify variables that drive cost such as weight, quantity, development culture, design inheritance and time. The nature of the relationships between the driver variables and cost will be discussed. In particular, the relationship between weight and cost will be examined in detail. A theoretical model of cost will be developed and tested statistically against a historical database of major research and development projects.

Cyr, Kelley↗
NASA NTRS1980

Studies of leading-edge thrust phenomena

A study of practical limitations on achievement of theoretical leading-edge thrust has been made and an empirical method for estimation of attainable thrust has been developed. The method is based on a theoretical analysis of a set of two-dimensional airfoils to define thrust dependence on airfoil geometric characteristics and arbitrarily defined limiting pressures, an examination of two-dimensional airfoil experimental data to provide an estimate of limiting pressure dependence on local Mach number and Reynolds number, and employment of simple sweep theory to adapt the method to three-dimensional wings. Because the method takes into account the spanwise variation of airfoil section characteristics, an opportunity is afforded for design by iteration to maximize the attainable thrust and the attendant performance benefits. The applicability of the method was demonstrated by comparisons of theoretical and experimental aerodynamic characteristics for a series of wing-body configurations. Generally, good predictions of the attainable thrust and its influence on lift and drag characteristics were obtained over a range of Mach numbers from 0.24 to 2.0.

Carlson, H. W.↗
DOE OSTI2026

A Scoping Review of Mixed Initiative Visual Analytics in the Automation Renaissance

Artificial agents are increasingly integrated into data analysis workflows, carrying out tasks that were primarily done by humans. Our research explores how the introduction of automation recalibrates the dynamic between humans and automating technology. To explore this question, we conducted a scoping review encompassing twenty years of mixed-initiative visual analytic systems. To describe and contrast the relationship between humans and automation, we developed an integrated taxonomy to delineate the objectives of these mixed-initiative visual analytics tools, how much automation they support, and the assumed roles of humans. Here, we describe our qualitative approach of integrating existing theoretical frameworks with new codes we developed. Our analysis shows that the visualization research literature lacks consensus on the definition of mixed-initiative systems and explores a limited potential of the collaborative interaction landscape between people and automation. Our research provides a scaffold to advance the discussion of human-AI collaboration during visual data analysis. Our integrated taxonomy is available in the form of a web application on https://smonadjemi.github.io/miva.

Monadjemi, Shayan [ORNL] (ORCID:0000000293855969)↗
NASA NTRS1977

Identification of Spey engine dynamics in the augmentor wing jet STOL research aircraft from flight data

The development and validation of a spey engine model is described. An analysis of the dynamical interactions involved in the propulsion unit is presented. The model was reduced to contain only significant effects, and was used, in conjunction with flight data obtained from an augmentor wing jet STOL research aircraft, to develop initial estimates of parameters in the system. The theoretical background employed in estimating the parameters is outlined. The software package developed for processing the flight data is described. Results are summarized.

Dehoff, R. L.↗
NASA NTRS1976

Space Tug Docking Study. Volume 5: Cost Analysis

The cost methodology, summary cost data, resulting cost estimates by Work Breakdown Structure (WBS), technical characteristics data, program funding schedules and the WBS for the costing are discussed. Cost estimates for two tasks of the study are reported. The first, developed cost estimates for design, development, test and evaluation (DDT&E) and theoretical first unit (TFU) at the component level (Level 7) for all items reported in the data base. Task B developed total subsystem DDT&E costs and funding schedules for the three candidate Rendezvous and Docking Systems: manual, autonomous, and hybrid.

Source record↗
NASA NTRS1980

Effect of propellant deformation on ignition and combustion processes in solid propellant cracks

A comprehensive theoretical model was formulated to study the development of convective burning in a solid propellant crack which continually deforms due to burning and pressure loading. In the theoretical model, the effect of interrelated structural deformation and combustion processes was taken into account by considering (1) transient, one dimensional mass, momentum, and energy conservation equations in the gas phase; (2) a transient, one dimensional heat conduction equation in the solid phase; and (3) quasi-static deformation of the two dimensional, linear viscoelastic propellant crack caused by pressure loading. Partial closures may generate substantial local pressure peaks along the crack, implying a strong coupling between chamber pressurization, crack combustion, and propellant deformation, especially when the cracks are narrow and the chamber pressurization rates high. The maximum pressure in the crack cavity is generally higher than that in the chamber. The initial flame-spreading process is not affected by propellant deformation.

Kumar, M.↗
NASA NTRS2011

The Electrostatic Environments of Mars and the Moon

The electrical activity present in the environment near the surfaces of Mars and the moon has very different origins and presents a challenge to manned and robotic planetary exploration missions. Mars is covered with a layer of dust that has been redistributed throughout the entire planet by global dust storms. Dust, levitated by these storms as well as by the frequent dust devils, is expected to be electrostatically charged due to the multiple grain collisions in the dust-laden atmosphere. Dust covering the surface of the moon is expected to be electrostatically charged due to the solar wind, cosmic rays, and the solar radiation itself through the photoelectric effect. Electrostatically charged dust has a large tendency to adhere to surfaces. NASA's Mars exploration rovers have shown that atmospheric dust falling on solar panels can decrease their efficiency to the point of rendering the rover unusable. And as the Apollo missions to the moon showed, lunar dust adhesion can hinder manned and unmanned lunar exploration activities. Taking advantage of the electrical activity on both planetary system bodies, dust removal technologies are now being developed that use electrostatic and dielectrophoretic forces to produce controlled dust motion. This paper presents a short review of the theoretical and semiempirical models that have been developed for the lunar and Martian electrical environments.

Calle, Carlos I.↗
NASA NTRS1971

Concepts for a theoretical and experimental study of lifting rotor random loads and vibrations. Phase 5C: Development of experimental methods

Test equipment which was built and the calibration tests are described. The test equipment consists of a two-bladed rotor of 16-in. diameter, the blades of which are elastically hinged in flapping. The feathering shaft of the blades can be harmonically rotated with the help of a cam mechanism located inside the hollow rotor shaft. The frequency range measured in the rotating system can be adjusted between 0 and 80 cps and the rotor speed between 0 and 40 cps. The test equipment is for measuring the flapping response of the blades to harmonic feathering excitation.

Hohenemser, K. H.↗
DOE OSTI2019

Exploring the crossover between high-energy-density plasma and ultracold neutral plasma physics

In this paper, we present ideas that were part of the miniconference on the crossover between High Energy Density Plasmas (HEDP) and Ultracold Neutral Plasmas (UNPs) at the 60th Annual Meeting of the American Physical Society Division of Plasma Physics, November 2018. We give an overview of UNP experiments with an emphasis on measurements of the time-evolving ion density and velocity distributions, the electron-ion thermalization rate, and plasma self-assembly—all just inside the strongly coupled plasma regime. We also present theoretical and computational models that were developed to understand a subset of HEDP experiments. However, because HEDP experiments display similar degrees of strong coupling, many aspects of these models can be vetted using precision studies of UNPs. This comparison is important because some statistical assumptions used for ideal plasmas are of questionable validity in the strongly coupled plasma regime. We summarize two theoretical approaches that extend kinetic theories into the strong-coupling regime and show good agreement for momentum transfer and self-diffusion. As capabilities improve, both computationally and experimentally, UNP measurements may help guide the ongoing development of HEDP-appropriate plasma models. Future opportunities in viscosity, energy relaxation, and magnetized plasmas are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A Framework for Error-Bounded Approximate Computing, with an Application to Dot Products

Approximate computing techniques, which trade off the computation accuracy of an algorithm for better performance and energy efficiency, have been successful in reducing computation and power costs in several domains. However, error sensitive applications in high-performance computing are unable to benefit from existing approximate computing strategies that are not developed with guaranteed error bounds. While approximate computing techniques can be developed for individual high-performance computing applications by domain specialists, this often requires additional theoretical analysis and potentially extensive software modification. Hence, the development of low-level error-bounded approximate computing strategies that can be introduced into any high-performance computing application without requiring additional analysis or significant software alterations is desirable. In this paper, we provide a contribution in this direction by proposing a general framework for designing error-bounded approximate computing strategies and apply it to the dot product kernel to develop \bf qdot---an error-bounded approximate dot product kernel. Following the introduction of qdot, here we perform a theoretical analysis that yields a deterministic bound on the relative approximation error introduced by qdot. Empirical tests are performed to illustrate the tightness of the derived error bound and to demonstrate the effectiveness of qdot on a synthetic dataset, as well as two scientific benchmarks---the conjugate gradient (CG) and power methods. In some instances, using qdot for the dot products in CG can result in many components being quantized to half precision without increasing the iteration count required for convergence to the same solution as CG using a double precision dot product.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Theoretical understanding of photon spectroscopies in correlated materials in and out of equilibrium

Photon-based spectroscopies have had a significant impact on both fundamental science and applications by providing an efficient approach to investigate the microscopic physics of materials. Together with the development of synchrotron X-ray techniques, theoretical understanding of the spectroscopies themselves and the underlying physics that they reveal has progressed through advances in numerical methods and scientific computing. In this Review, we provide an overview of theories for angle-resolved photoemission spectroscopy and resonant inelastic X-ray scattering applied to quantum materials. First, we discuss methods for studying equilibrium spectroscopies, including first-principles approaches, numerical many-body methods and a few analytical advances. Second, we assess the recent development of ultrafast techniques for out-of-equilibrium spectroscopies, from characterizing equilibrium properties to generating transient or metastable states, mainly from a theoretical point of view. Lastly, we identify the main challenges and provide an outlook for the future direction of the field.

36 MATERIALS SCIENCE↗
NASA NTRS1977

A high-temperature wideband pressure transducer

A condenser microphone AM carrier system, which has been developed to measure pressure fluctuations at elevated temperatures, consists of the following components: a condenser microphone designed for operation at elevated temperatures; existing carrier electronics developed under two previous research grants but adapted to meet present requirements; a 6 m cable operating as a half-wavelength transmission line between the microphone and carrier electronics; and a voltage-controlled oscillator used in a feedback loop for automatic tuning control. Both theoretical and practical aspects of the development program are considered. The three predominant effects of temperature changes are changes in the membrane-backplate gap, membrane tension, and air viscosity. The microphone is designed so that changes in gap and membrane tension tend to have compensating effects upon the microphone sensitivity.

Zuckerwar, A. J.↗
NASA NTRS1989

Laboratory and theoretical studies of baroclinic processes

An understanding is being developed for processes which may be important in the atmosphere, and the definition and analysis of baroclinic experiments utilizing the geophysical fluid flow cells (GFFC) apparatus in microgravity space flights. Included are studies using numerical codes, theoretical models, and terrestrial laboratory experiments. The numerical modeling is performed in three stages: calculation of steady axisymmetric flow, calculation of fastest-growing linear eigenmodes, and nonlinear effects (first, wave-mean flow interactions, then wave-wave interactions). The code can accommodate cylindrical, spherical, or channel geometry. It uses finite differences in the vertical and meridional directions, and is spectral in the azimuthal. The theoretical work was mostly in the area of effects of topography upon the baroclinic instability problem. The laboratory experiments are performed in a cylindrical annulus which has a temperture gradient imposed upon the lower surface and an approximately isothermal outer wall, with the upper and inner surfaces being nominally thermally insulating.

Miller, Timothy↗
NASA NTRS1997

Correspondence between theoretical models and dual energy x-ray absorptiometry measurements of femoral cross-sectional growth during adolescence

We have developed an analytical model of long bone cross-sectional ontogeny in which appositional growth of the diaphysis is primarily driven by mechanical stimuli associated with increasing body mass during growth and development. In this study, our goal was to compare theoretical predictions of femoral diaphyseal structure from this model with measurements of femoral bone mineral and geometry by dual energy x-ray absorptiometry. Measurements of mid-diaphyseal femoral geometry and structure were made previously in 101 Caucasian adolescents and young adults 9-26 years of age. The data on measured bone mineral content and calculated section modulus were compared with the results of our analytical model of cross-sectional development of the human femur over the same age range. Both bone mineral content and section modulus showed good correspondence with experimental measurements when the relationships with age and body mass were examined. Strong linear relationships were evident for both parameters when examined as a function of body mass.

NASA Discipline Musculoskeletal↗
NASA NTRS2014

Lithium-Air Cell Development

Lithium-air (Li-air) primary batteries have a theoretical specific capacity of 11,400 Wh/kg, the highest of any common metal-air system. NASA is developing Li-air technology for a Mobile Oxygen Concentrator for Spacecraft Emergencies, an application which requires an extremely lightweight primary battery that can discharge over 24 hours continuously. Several vendors were funded through the NASA SBIR program to develop Li-air technology to fulfill the requirements of this application. New catalysts and carbon cathode structures were developed to enhance the oxygen reduction reaction and increase surface area to improve cell performance. Techniques to stabilize the lithium metal anode surface were explored. Experimental results for prototype laboratory cells are given. Projections are made for the performance of hypothetical cells constructed from the materials that were developed.

Lithium-air↗
DOE OSTI2025

Production of neutron-rich heavy nuclei in deep-inelastic 208 Pb + 208 Pb collisions within the stochastic mean-field theory

In deep-inelastic collisions of heavy nuclei, reaction products with a wide range of mass and charge are produced. Such collisions been considered as a possible way to produce superheavy nuclei, as an alternative to fusion reactions. To provide reliable theoretical predictions, it is desired to develop microscopic approaches that correctly and accurately describe nucleon transfer processes in dissipative collisions of heavy nuclei. The purpose of the present work is (1) to investigate the mechanism of nucleon transfers in dissipative collisions of two heavy nuclei, and (2) to explore possible pathways to produce neutron-rich heavy nuclei, through detailed theoretical analyses of fluctuations and correlations in nucleon transfers in 208 Pb + 208 Pb reactions. Three-dimensional time-dependent Hartree-Fock (TDHF) calculations are performed for the collisions of 208 Pb + 208 Pb at 𝐸 c.m. = 832, 936, and 1040 MeV, using the Skyrme SLy4d energy density functional. To calculate fluctuations and correlations in nucleon transfers, we employ the stochastic mean-field (SMF) theory, and the results are compared with another theoretical framework currently available, the time-dependent random phase approximation (TDRPA). Primary and secondary production cross sections are calculated with the SMF theory combined with a statistical model, GEMINI ++ . Using information of nucleon flow across a neck of colliding nuclei in TDHF calculations, we solve quantal diffusion equations for fluctuations and correlations in nucleon transfers based on the SMF theory. From the SMF calculations, we obtain the time evolution of diffusion coefficients as well as fluctuations and correlations in nucleon transfers for a range of initial orbital angular momenta. We compare the results of the SMF calculations with those of TDRPA, showing that TDRPA tends to predict substantially larger fluctuations and correlations in strongly damped collisions of heavy nuclei, which exhibit complex initial angular momentum dependence, while the SMF results provide almost constant (stable) values. Using the obtained fluctuations and correlations, we calculate primary and secondary production cross sections for the 208 Pb + 208 Pb collisions. From the results, we find that both lighter and heavier reaction products as compared to 208 Pb are produced for a wide region in the 𝑁−𝑍 plane as primary products, thanks to the quantal diffusion mechanism in the dissipative collisions. However, we show that cross sections for production of heavy nuclei with 𝑍 ≳ 90 or 𝑁 ≳ 135 are washed out due to secondary particle evaporation and/or fission processes. On the other hand, we find that there remain sizable cross sections for production of neutron-rich nuclei along 𝑁 = 126 with 𝑍< 82, even after secondary disintegration processes. We demonstrate that the secondary production cross sections depend weakly on incident energies, but lower (higher) energy is slightly preferred for production of nuclei with smaller (larger) atomic numbers as compared to 𝑍 = 82. Here, based on the microscopic SMF calculations, it has been shown that deep-inelastic collisions of heavy nuclei, such as 208 Pb + 208 Pb examined in this study, can be a promising means to produce neutron-rich heavy nuclei along 𝑁=126. Discrepancies between the SMF and TDRPA approaches are left unsolved for future investigations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗