Search NASA⌕ Search

SEARCH · Search NASA

Results for “variable free”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Carrier properties of Bi(111) grown on mica and Si(111)

A comparison is presented between properties of Bi(111) films grown by Stranski-Krastanov epitaxy on Si(111) 7 × 7 and by van der Waals epitaxy on mica substrates. Thin film morphologies and electronic transport properties of Bi(111) films of variable thickness are investigated for each growth method. Atomic force micrographs for Bi(111) films on mica reveal clearly defined triangular regions consisting of layered steps with height 0.4 nm, corresponding to the Bi(111) bilayer height. Variable-temperature electronic transport measurements show the existence of a quantum confinement-induced energy gap in the film interiors, resulting in a semimetal-to-semiconductor transition. Magnetotransport analysis in a three-carrier model including metallic electrons in surface states and electrons and holes in the films' interiors provides a detailed study of densities, mobilities, and mean-free paths of the three carrier types. Further, improved electronic transport properties are found in Bi(111) films of higher thickness on mica compared to on Si(111), a likely result of the largely strain-free van der Waals epitaxial growth.

36 MATERIALS SCIENCE↗

Remote Measurement of Heat Flux from Power Plant Cooling Lakes

Laboratory experiments have demonstrated a correlation between the rate of heat loss q" from an experimental fluid to the air above and the standard deviation σ of the thermal variability in images of the fluid surface. These experimental results imply that q" can be derived directly from thermal imagery by computing σ. This paper analyses thermal imagery collected over two power plant cooling lakes to determine if the same relationship exists. Turbulent boundary layer theory predicts a linear relationship between q" and σ when both forced (wind driven) and free (buoyancy driven) convection are present. Datasets derived from ground- and helicopter-based imagery collections had correlation coefficients between σ and q" of 0.45 and 0.76, respectively. Values of q" computed from a function of σ and friction velocity u* derived from turbulent boundary layer theory had higher correlations with measured values of q" (0.84 and 0.89). Finally, this research may be applicable to the problem of calculating losses of heat from the ocean to the atmosphere during high-latitude cold-air outbreaks because it does not require the information typically needed to compute sensible, evaporative, and thermal radiation energy losses to the atmosphere.

54 ENVIRONMENTAL SCIENCES↗

LONG-TERM TECHNETIUM INTERACTIONS WITH REDUCING CEMENTITIOUS MATERIALS

Technetium is among the key risk drivers at the Saltstone Facility. The way that it is immobilized in this cementitious waste form is by converting its highly mobile Tc(VII) form to a much less mobile Tc(IV) form through reduction by the cement's blast furnace slag. This report includes a review of published data and experimental results dealing with Tc leaching from Portland cement waste forms. The objectives for the literature study were to document previous reports of Tc interactions with slag-containing cementitious materials. The objectives for the laboratory study were to measure Tc-saltstone Kd values under reducing conditions. From the literature it was concluded: (1) Spectroscopic evidence showed that when Tc(IV) in a slag-cement was exposed to an oxidizing environment, it will convert to the more mobile Tc(VII) species within a short time frame, 2.5 years. (2) SRS saltstone will reduce Tc(VII) in the absence of NaS or sodium dithionite in a reducing atmosphere. (3) Only trace concentrations of atmospheric oxygen (30 to 60 ppm O{sub 2}; Eh 120 mV) at the high pH levels of cementitious systems is required to maintain Tc as Tc(VII). (4) Experimental conditions must be responsible for wide variability of measured K{sub d} values, such that they are either very low, {approx}1 mL/g, or they are very high {approx}1000 mL/g, suggesting that Tc(VII) or Tc(IV) dominate the systems. Much of this variability appears to be the result of experimental conditions, especially direct controls of oxygen contact with the sample. (5) A field study conducted at SRS in the 1980s indicated that a slag-saltstone immobilized Tc for 2.5 years. Below background concentrations of Tc leached out of the slag-containing saltstone, whereas Tc leached out of the slag-free saltstone at the rate of nitrate loss. One possible explanation for the immobilization of Tc in this study was that the slag-saltstone maintained reducing conditions within the core of the 55-gallon sample, whereas in the small-scale lab experiments, where samples were crushed to <1mm, oxygen diffused through the particles and reoxidize the slag during the contact period. (6) Present site specific reduction capacity value of 820 {micro}eq/g is in the realm of literature values that were either measured or theoretically estimated based on thermodynamic calculations. (7) Almond and Kaplan (2011) measured desorption K{sub d} values from a Vault 4 saltstone core sample. Desorption leaching tests were conducted in a glovebag maintained at 30 to 60 ppm O2. A ground olive-colored saltstone sample, as compared to black monolith sample, was used in this study, indicating the sample had been exposed to O2, which is likely the cause for the lower then anticipated Kd value measured, 139 mL/g. Tc adsorption experiments were conducted under reducing conditions (<0.5 ppm O{sub 2}(g) -585 mV, 2% H{sub 2}, pH 11.66) and obtained K{sub d} values of {approx}1000 mL/g in a saltstone formulated with 45% slag (nominal concentration) and a K{sub d} of 10,000 mL/g when the saltstone contained 95% slag. The K{sub d} values logarithmically increased from 1 day to 56 days, with little sorption generally occurring in the first eight days. Steady state had not been achieved during the initial 56 days. However, the slag-free cement control samples also had K{sub d} values near 1000 mL/g and extremely low redox conditions, due to the 2% H{sub 2} atmosphere. A key concept that this literature review and the experimental results provide is that Tc immobilization is dependent on experimental conditions, specifically, the available oxygen that can oxidize technetium in a portland cement or saltstone-like monolith. The shrinking core model used in the saltstone performance assessment describes the existence of an oxidized outer layer of concrete surrounding a shrinking core of reducing intact saltstone. A sharp boundary between the two zones moves slowly inward, resulting in oxidation of Tc(IV). This work largely reinforced our conceptual model of the shrinking core model, but more importantly provided clarity regarding process kinetics, mechanisms, and input values for future detailed modeling. The shrinking core model in itself is devoid of geochemical mechanisms. This study provided more geochemical detail to this conceptual numerical model.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

User's guide to computer program CIVM-JET 4B to calculate the transient structural responses of partial and/or complete structural rings to engine-rotor-fragment impact

A user-oriented computer program CIVM-JET 4B is described to predict the large-deflection elastic-plastic structural responses of fragment impacted single-layer: (a) partial-ring fragment containment or deflector structure or (b) complete-ring fragment containment structure. These two types of structures may be either free or supported in various ways. Supports accommodated include: (1) point supports such as pinned-fixed, ideally-clamped, or supported by a structural branch simulating mounting-bracket structure and (2) elastic foundation support distributed over selected regions of the structure. The initial geometry of each partial or complete ring may be circular or arbitrarily curved; uniform or variable thicknesses of the structure are accommodated. The structural material is assumed to be initially isotropic; strain hardening and strain rate effects are taken into account.

Stagliano, T. R.↗

Data processing system and interfacing elements time base analysis

The processing of time in the Orbiter System Services software and the associated facilities provided to the user community are described. The descriptions are directed toward showing the functional intent of the design rather than the actual implementation. Simplified flow diagrams are included. Based upon detailed analysis of a preliminary review copy of the Approach and Landing Test (ALT) System Software Detailed Design Specification and the Program Listings for Version 17 Prime, the processing of time has the potential for error free operations. The processing of time is not expected to change between ALT and the Operational Flight Test (OFT) other than differences in value of some constants for control and limit checking. Due to the dynamic nature of onboard time processing and its criticality to the successful operation of the orbiter, it is recommended that a comprehensive list of external variables, their locations, initial values, and a 'where used' listing be produced, as a by-product of the link edit process, for all non-HAL coding. In addition, a careful review of the verification test procedures for the System Services time-related software is recommended.

Blackburn, J. D.↗

Cold-air performance of free-power turbine designed for 112-kilowatt automotive gas-turbine engine. 1: Design Stator-vane-chord setting angle of 35 deg

A cold air experimental investigation of a free power turbine designed for a 112-kW automotive gas-turbine was made over a range of speeds from 0 to 130 percent of design equivalent speeds and over a range of pressure ratio from 1.11 to 2.45. Results are presented in terms of equivalent power, torque, mass flow, and efficiency for the design power point setting of the variable stator.

Kofskey, M. G.↗

Investigation of nose bluntness and angle of attack effects on slender bodies in viscous hypersonic flows

Hypersonic flows over cones and straight biconic configurations are calculated for a wide range of free stream conditions in which the gas behind the shock is treated as perfect. Effect of angle of attack and nose bluntness on these slender cones in air is studied extensively. The numerical procedures are based on the solution of complete Navier-Stokes equations at the nose section and parabolized Navier-Stokes equations further downstream. The flow field variables and surface quantities show significant differences when the angle of attack and nose bluntness are varied. The complete flow field is thoroughly analyzed with respect to velocity, temperature, pressure, and entropy profiles. The post shock flow field is studied in detail from the contour plots of Mach number, density, pressure, and temperature. The effect of nose bluntness for slender cones persists as far as 200 nose radii downstream.

Sehgal, A. K.↗

Combined effect of nose bluntness and angle of attack on slender bodies in viscous hypersonic flows

Hypersonic flows over cones and straight biconic configurations are calculated for a wide range of free stream conditions in which the gas behind the shock is treated as perfect. Effect of angle of attack and nose bluntness on these slender cones in air is studied extensively. The numerical procedures are based on the solution of complete Navier-Stokes equations at the nose section and parabolized Navier-Stokes equations further downstream. The flow field variables and surface quantities show significant differences when the angle of attack and nose bluntness are varied. The complete flow field is thoroughly analyzed with respect to velocity, temperature, pressure, and entropy profiles. The post shock flow field is studied in detail from the contour plots of Mach number, density, pressure, and temperature. The effect of nose bluntness for slender cones persists as far as 200 nose radii downstream.

Tiwari, S. N.↗

Three-Dimensional Thermal Boundary Layer Corrections for Circular Heat Flux Gauges Mounted in a Flat Plate with a Surface Temperature Discontinuity

Three-dimensional Navier-Stokes computational fluid dynamics (CFD) analysis has been performed in an effort to determine thermal boundary layer correction factors for circular convective heat flux gauges (such as Schmidt-Boelter and plug type)mounted flush in a flat plate subjected to a stepwise surface temperature discontinuity. Turbulent flow solutions with temperature-dependent properties are obtained for a free stream Reynolds number of 1E6, and freestream Mach numbers of 2 and 4. The effect of gauge diameter and the plate surface temperature have been investigated. The 3-D CFD results for the heat flux correction factors are compared to quasi-21) results deduced from constant property integral solutions and also 2-D CFD analysis with both constant and variable properties. The role of three-dimensionality and of property variations on the heat flux correction factors has been demonstrated.

Kandula, M.↗

Satellite Monitoring of Asian Dust Storms from SeaWiFS and MODIS: Source, pathway and Interannual Variability

Among the many components that contribute to air pollution, airborne mineral dust plays an important role due to its biogeochemical impact on the ecosystem and its radiative-forcing effect on the climate system. In East Asia, dust storms frequently accompany the cold and dry air masses that occur as part of springtime cold front systems. China's capital, Beijing, and other large cities are on the primary pathway of these dust storm plumes, and their passage over such population centers causes flight delays, pushes grit through windows and doors, and forces people indoors. Furthermore, during the spring these anthropogenic and natural air pollutants, once generated over the source regions, can be transported out of the boundary layer into the free troposphere and can travel thousands of kilometers across the Pacific into the United States and beyond. In this paper, we will demonstrate the capability of a new satellite algorithm to retrieve aerosol optical thickness and single scattering albedo over bright-reflecting surfaces such as urban areas and deserts. Such retrievals have been difficult to perform using previously available algorithms that use wavelengths from the mid-visible to the near IR because they have trouble separating the aerosol signal from the contribution due to the bright surface reflectance. The new algorithm, called Deep Blue, utilizes blue-wavelength measurements from instruments such as SeaWiFS and MODIS to infer the properties of aerosols, since the surface reflectance over land in the blue part of the spectrum is much lower than for longer wavelength channels. We have validated the satellite retrieved aerosol optical thickness with data from AERONET sunphotometers over desert and semi-desert regions. The comparisons show reasonable agreements between these two. These new satellite products will allow scientists to determine quantitatively the aerosol properties near sources using high spatial resolution measurements from SeaWiFS and MODIS-like instruments. The multiyear satellite measurements since 1998 from SeaWiFS will be utilized to investigate the interannual variability of source, pathway, and dust loading associated with these dust outbreaks in East Asia. The monthly averaged aerosol optical thickness during the springtime from SeaWiFS will also be compared with the MODIS Deep Blue products.

Hsu, N. Christina↗

High Free-Tropospheric Aitken-Mode Aerosol Concentrations Buffer Cloud Droplet Concentrations in Large-Eddy Simulations of Precipitating Stratocumulus

A new Aitken mode aerosol microphysics scheme is developed for a large eddy simulation model in order to better investigate cloud-aerosol interactions in the marine boundary layer and to study the Aitken buffering hypothesis of McCoy et al. (2021), https://doi.org/10.1029/2020jd033529. This scheme extends the single-mode two-moment prognostic aerosol scheme of Berner et al. (2013), https://doi.org/10.5194/acp-13-12549-2013. Seven prognostic variables represent accumulation and Aitken log-normal aerosol modes in air and droplets as well as 3 gas species. Scavenging of interstitial and other unactivated aerosol by cloud and rain drops are treated using the scheme described in Berner et al. (2013), https://doi.org/10.5194/acp-13-12549-2013. The scheme includes coagulation of unactivated aerosol and a simple chemistry model with gas phase H 2 SO 4 , SO 2 , and DMS as prognostic variables to capture basic influences of sulfur chemistry on the model aerosols. Nucleation of H 2 SO 4 aerosol particles from gas-phase H 2 SO 4 is neglected. A deep, precipitating stratocumulus case (VAMOS Ocean Cloud Atmosphere Land Study RF06) is used to test the new scheme. The presence of the Aitken mode aerosol increases the cloud droplet concentration through activation of the larger Aitken particles and delays the creation of an ultraclean, strongly precipitating cumulus state. Scavenging of unactivated accumulation and Aitken particles by cloud and precipitation droplets accelerates the collapse. Increasing either the above-inversion Aitken concentration or the surface Aitken flux increases the Aitken population in the boundary layer and prevents the transition to an ultraclean state.

54 ENVIRONMENTAL SCIENCES↗

High Accuracy Signal Validation Framework for Sensor Calibration Assessment in NPPs

Effective and efficient health management of sensing channels and instrumentation supports reliable and accurate process monitoring capacities in any industry. Current practice in the nuclear industry relies on periodic calibration assessment and correction activities. This time based maintenance technique consists of three steps: i) removal of sensor to a test environment, ii) testing and recalibration, and iii) reinstallation of sensor into its working environment. This procedure is highly labor intensive, adds to the outage cost and timeline, and contributes to worker radiation exposure and ALARA requirements. Furthermore, the human element contributes to error factors in all stages of the procedure. The effectiveness of this calibration procedure after sensors are returned to working environmental variables also raises concerns, and the practicability of this periodic approach is uncertain for future reactor designs with longer operating cycles between refueling outages. Studies indicate that periodic calibration assessment find only 10% of sensing instrumentations with calibration issues during a single outage (18- 24 months), meaning at least 90% of sensors are undergoing unnecessary maintenance actions. This provides an opportunity to maintain the current levels of safety and functional integrity with fewer, more targeted maintenance actions and lower economic burden. Performance-based maintenance planning shows much promise over current periodic maintenance approaches. Specifically, online monitoring (OLM) utilizes the continually collected process data to non-intrusively monitor the calibration status of process instrumentation and detect the onset of de-calibration, thereby minimizing the number of recalibration procedures required. Ultimately, this can lead to termination of time based recalibration at NPPs. OLM utilizes the process measurements made for process monitoring and control to evaluate the calibration status of the sensors and instrumentation making the measurements. OLM can detect and differentiate sensor faults and process anomalies, thus providing a valuable tool to suit the industry's and regulatory body's requirements. Though supported by more than a decade of research, OLM for sensor calibration assessment is yet to be implemented in the US fleet due to regulatory requirements and constraints. As shown in Figure 1, OLM utilizes process data to train statistical models that predict normal, error-free process behavior. Measured process values are compared with error-corrected predictions to ascertain the presence of faults. The reliability of OLM is dependent on the quality of its predictions, measured in part by the uncertainty in these predictions. This research develops a framework to accurately quantify the prediction uncertainty based on Bayesian inference techniques to provide the required confidence levels for OLM systems. The expected outcomes include signal validation by high-accuracy, high-confidence uncertainty quantification for variable sensor types and operating ranges. Furthermore, the framework will facilitate fault detection capacities and so-called virtual sensors, a capability to replace faulty sensor measurements with error-corrected values when a sensor fault is detected. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Satellite Monitoring of Asian Dust Storms from SeaWiFS and MODIS: Source, Pathway, and Interannual Variability

Among the many components that contribute to air pollution, airborne mineral dust plays an important role due to its biogeochemical impact on the ecosystem and its radiative-forcing effect on the climate system. In East Asia, dust storms frequently accompany the cold and dry air masses that occur as part of springtime cold front systems. China's capital, Beijing, and other large cities are on the primary pathway of these dust storm plumes, and their passage over such population centers causes flight delays, pushes grit through windows and doors, and forces peop Ie indoors. Furthermore, during the spring these anthropogenic and natural air pollutants, once generated over the source regions, can be tran sported out of the boundary layer into the free troposphere and can travel thousands of kilometers across the Pacific into the United States and beyond. In this paper, we will demonstrate the capability of a new satellite algorithm to retrieve aerosol optical thickness and single scattering albedo over brightreflecting surfaces such as urban areas and deserts. Such retrievals have been difficult to perform using previously available algorithms that use wavelengths from the mid-visible to the near IR because they have trouble separating the aerosol signal from the contribution due to the bright surface reflectance. The new algorithm, called Deep Blue, utilizes blue-wavelength measurements from instruments such as Sea WiFS and MODIS to infer the properties of aerosols, since the surface reflectance over land in the blue part of the spectrum is much lower than for longer wavelength channels. We have validated the satellite retrieved aerosol optical thickness with data from AERONET sunphotometers over desert and semi-desert regions. The comparisons show reasonable agreements between these two. These new satellite products will allow scientists to determine quantitatively the aerosol properties near sources using high spatial resolution measurements from Sea WiFS and MODISlike instruments. The multiyear satellite measurements since 1998 from SeaWiFS will be utilized to investigate the interannual variability of source, pathway, and dust loading associated with these dust outbreaks in East Asia. The monthly averaged aerosol optical thickness during the springtime from SeaWiFS will also be compared with the MODIS Deep Blue products.

Hsu, N. Christina↗

FACE-MDS Phase 2: Data from Six US-Located Elevated CO2 Experiments

This dataset contains measured ecosystem data from four Free Air CO2 Enrichment (FACE) experiments–Duke, Oak Ridge (ORNL), and Rhinelander -- and one Open Top Chamber (OTC) experiment -- Kennedy Space Center (KSCO). The sites were located in the United States and contain data from 1996-2009. These sites were the study sites of the FACE Model Data Synthesis (FACE-MDS) project phase 2. The file naming convention can be found in the file 'facemds-file-table-sitedata.xml' and information about variable naming convention can be found in the file 'facemds-standard-name-table-modvars.xml'. We followed the ALMA v3 convention for meteorological variables and developed a hierarchical naming scheme for ecosystem variables. Additional info can be found in the protocols in the accompanying meteorological dataset (Walker et al. 2018: doi:10.15485/1480328). We replaced the original naming convention mentioned in the protocol with the one described in 'facemds-standard-name-table-modvars.xml'. The outputs of the FACE-MDS phase 2 are in Walker et al (2018: doi:10.15485/1480327). The dataset contains 18 data files that are available in comma-separate (*.csv), and 18 R Data Serialization (*.rds) format. 2 XML (*.xml) companion files and additional metadata are provided: 2 data dictionaries and a file-level metadata file in comma-separate (.csv) format and a user guide in PDF (*.pdf) format. This dataset was updated on 2019-06-28 to fix daily files at Duke and ORNL were incorrectly labelled and were standard error files instead of plot level data. Now corrected and all three (plot, mean, standard error) daily data files for both sites have been added. This dataset was updated on 2026-06-08 to add a user guide, data dictionary file, and a file-level metadata file. DUKE_ax_v2.csv was added to match the no data value format of other files in this dataset. DUKE_ax.csv is maintained as a data file. No previously released data values were changed.

54 ENVIRONMENTAL SCIENCES↗

Theoretical Understanding of the Linear Relationship between Convective Updrafts and Cloud-Base Height for Shallow Cumulus Clouds. Part II: Continental Conditions

This is the Part II of a two-part study that seeks a theoretical understanding of an empirical relationship for shallow cumulus clouds: subcloud updraft velocity covaries linearly with the cloud-base height. This work focuses on continental cumulus clouds that are more strongly forced by surface fluxes and more deviated from equilibrium than those over oceans (Part I). We use a simple analytical model for shallow cumulus that is well tested against a high-resolution (25 m in the horizontal) large-eddy simulation model. Consistent with a conventional idea, we find that surface Bowen ratio is the key variable that regulates the covariability of both parameters: under the same solar insolation, a drier surface allows for stronger buoyancy flux, triggering stronger convection that deepens the subcloud layer. We find that the slope of the Bowen-ratio-regulated relationship between the two parameters (defined as λ) is dependent on both the local time and the stability of the lower free atmosphere. The value of λ decreases with time exponentially from sunrise to early afternoon and linearly from early afternoon to sunset. The value of λ is larger in a more stable atmosphere. In addition, continental λ in the early afternoon more than doubles the oceanic λ. Validation of the theoretical results against ground observations over the Southern Great Plains shows a reasonable agreement. Physical mechanisms underlying the findings are explained from the perspective of different time scales at which updrafts and cloud-base height respond to a surface flux forcing.

54 ENVIRONMENTAL SCIENCES↗

Koopman-Based Approach to Nonintrusive Reduced Order Modeling: Application to Aerodynamic Shape Optimization and Uncertainty Propagation

A methodology for nonintrusive projection-based nonlinear model reduction originally presented by Renganathan et al. is further extended here toward parametric systems with a focus on application to aerospace design. Specifically, the method is extended to address static systems with parametric geometry (that deforms the mesh) in addition to parametric freestream boundary conditions. The main idea is to first perform a transformation on the governing equations such that it is lifted to a higher-dimensional but linear underdetermined system. This enables one to extract the system matrices easily as compared to that of the original nonlinear system. The underdetermined system is closed with a set of model-dependent nonlinear constraints upon which the model reduction is finally performed. The methodology is validated on the subsonic and transonic inviscid flows past the NACA0012 and the RAE2822 airfoils with parametrized shapes. The utility of the approach is further demonstrated by applying it to two common problems in aerospace design, namely, derivative-free global optimization and parametric uncertainty quantification with Monte Carlo sampling. Overall, the methodology is shown to achieve accuracy up to 5% and computational speedup of two to three orders of magnitude relative to the full order model. Comparison against another nonintrusive model reduction method revealed that the proposed approach is more robust, accurate, and retains the consistency between the state variables.

97 MATHEMATICS AND COMPUTING↗

A VLA SURVEY FOR FAINT COMPACT RADIO SOURCES IN THE ORION NEBULA CLUSTER

We present Karl G. Jansky Very Large Array 1.3, 3.6, and 6 cm continuum maps of compact radio sources in the Orion Nebular Cluster (ONC). We mosaicked 34 arcmin{sup 2} at 1.3 cm, 70 arcmin{sup 2} at 3.6 cm and 109 arcmin{sup 2} at 6 cm, containing 778 near-infrared detected young stellar objects and 190 Hubble Space Telescope -identified proplyds (with significant overlap between those characterizations). We detected radio emission from 175 compact radio sources in the ONC, including 26 sources that were detected for the first time at these wavelengths. For each detected source, we fitted a simple free–free and dust emission model to characterize the radio emission. We extrapolate the free–free emission spectrum model for each source to ALMA bands to illustrate how these measurements could be used to correctly measure protoplanetary disk dust masses from submillimeter flux measurements. Finally, we compare the fluxes measured in this survey with previously measured fluxes for our targets, as well as four separate epochs of 1.3 cm data, to search for and quantify the variability of our sources.

79 ASTRONOMY AND ASTROPHYSICS↗

The Luminous Blue Variable RMC 127 as Seen with ALMA and ATCA

We present ALMA and ATCA observations of the luminous blue variable RMC 127. The radio maps show for the first time the core of the nebula and evidence that the nebula is strongly asymmetric with a Z-pattern shape. Hints of this morphology are also visible in the archival Hubble Space Telescope Hα image, which overall resembles the radio emission. The emission mechanism in the outer nebula is optically thin free–free in the radio. At high frequencies, a component of point-source emission appears at the position of the star, up to the ALMA frequencies. The rising flux density distribution (S{sub ν}∼ν{sup 0.78±0.05}) of this object suggests thermal emission from the ionized stellar wind and indicates a departure from spherical symmetry with n{sub e}(r)∝r{sup −2}. We examine different scenarios to explain this excess of thermal emission from the wind and show that this can arise from a bipolar outflow, supporting the suggestion by other authors that the stellar wind of RMC 127 is aspherical. We fit the data with two collimated ionized wind models, and we find that the mass-loss rate can be a factor of two or more smaller than in the spherical case. We also fit the photometry obtained by IR space telescopes and deduce that the mid- to far-IR emission must arise from extended, cool (∼80 K) dust within the outer ionized nebula. Finally, we discuss two possible scenarios for the nebular morphology: the canonical single-star expanding shell geometry and a precessing jet model assuming the presence of a companion star.

79 ASTRONOMY AND ASTROPHYSICS↗