Search NASA⌕ Search

SEARCH · Search NASA

Results for “Arms Control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

UNH TDP - Concurrent Measurements of Inflow, Power Performance, and Loads for a Grid-Synchronized Vertical Axis Cross-Flow Turbine Operating in a Tidal Estuary

This data was collected between October 12 and December 15 of 2021 at the University of New Hampshire (UNH) and Atlantic Marine Energy Center (AMEC) turbine deployment platform (TDP). This data set includes over 29 days of grid connected turbine operation during this 65 day time frame. The priority for this measurement campaign was to collect data while the turbine was electrically connected to the grid by means of a rectifier and inverter. The Fall_2021_UNH_Measurement_Timeline.png highlights when each instrument was functioning and the Fall_2021_UNH_Test_Log.jpg indicates the four main regions for analysis available from this measurement campaign. The TDP is a floating structure moored on the Portsmouth facing side of Memorial Bridge pier #2, which spans the Piscataqua River between Portsmouth, NH and Kittery, ME. The Piscataqua River connects the Great Bay Estuary to the Gulf of Maine and the river currents are dominated by tidal forcing with water velocities exceeding 2.5 m/s during spring ebb tides at this site which were previously characterized by Kaelin Chancey (Assessment Of The Localized Flow And Tidal Energy Conversion System At An Estuarine Bridge - UNH MS Thesis 2019). The turbine under test was a modified New Energy Corporation (Calgary, CA) model EVG-025 4-blade H-Darrius type vertical axis cross flow turbine that rotates in the clockwise direction with a rotor diameter of 3.2m and blade length of 1.7m. The hydro-foil profile was a NACA 0021 with a 10 inch chord length and a blade preset pitch angle of +4deg with a positive angle corresponding with the toe in direction. The standard EVG-025 has a rotor diameter of 3.4m and its rated power output is 25kW at 3 m/s. The rotor diameter was reduced to accommodate the size of the existing TDP moon-pool. This project was pursued to quantify device performance for cross flow turbines operating in a marine environment. Accurate physical models, to characterize cross flow turbine performance, require real operational data sets due to the complexity of blade fluid interactions. This data can help support model development which will help predict turbine performance when analyzing perspective project locations in the future. Instrumentation was deployed to measure; water speed/direction, electrical power output, turbine shaft speed, turbine thrust force, and platform motion. Concurrent measurements of these parameters allow for correlations (cause and affect) to be inferred, allowing for characterization of device performance over a range of operating conditions. Water currents were measured using Acoustic Doppler Current Profilers (ADCP's) and Acoustic Doppler Velocimeters (ADV's) directly upstream and downstream of the turbine for inflow, wake and turbulence measurements. Electrical power output was measured using the Voltsys rectifier and the Shark power meter. Shaft speed was calculated based on the Voltsys measurements of the permanent magnet three phase generator AC generation frequency, coupled directly to the cross flow turbine under test (i.e., no gear box). Platform motions were captured using a Yost IMU (inertial measurement unit). Turbine thrust loading was measured using a reaction arm about the turbine deployment platform spanning beam, where two bi-directional load cells were connected to the system via a pinned connection. This submission includes zipped folders for each instrument containing quality controlled (QC'd) data in daily .csv files for the relevant duration specific to each instrument, along with separate .csv file that contains the units for each variable. Some instrument daily files are quite large and can pose a challenge for a visual spreadsheet editor to open. A processing software like MATLAB or Python is recommended. Note the degree of QC varied between each instrument due to time constraints. Particular time and attention was given to perform quality control tests on the acoustic based instruments that are particularly suscep...

16 TIDAL AND WAVE POWER↗

aosflow3 (a1)

The aerosol observing system (AOS) is the primary platform for in situ aerosol measurements at Earth’s surface. Each AOS has a different complement of instruments, which are selected to ensure the best measurements at each deployment site. The AOS measures aerosol optical properties to better understand how particles interact with solar radiation and influence the Earth's radiation balance. These measurements are useful for calculating parameters used in radiative forcing calculations, such as the aerosol single scattering albedo, asymmetry parameter, mass scattering efficiency, and hygroscopic growth. Measurements made with the AOS form a long-term record at the ARM fixed sites. Shorter measurement records are available from mobile deployments in a wide variety of geographical regions. These measurements are valuable for: identifying long-term changes in aerosol properties identifying atmospheric processes controlling aerosol life cycle and their influence on clouds providing experimental data for developing and testing atmospheric climate models.

54 ENVIRONMENTAL SCIENCES↗

aoshumidgr (01)

The aerosol observing system (AOS) is the primary platform for in situ aerosol measurements at Earth’s surface. Each AOS has a different complement of instruments, which are selected to ensure the best measurements at each deployment site. The AOS measures aerosol optical properties to better understand how particles interact with solar radiation and influence the Earth's radiation balance. These measurements are useful for calculating parameters used in radiative forcing calculations, such as the aerosol single scattering albedo, asymmetry parameter, mass scattering efficiency, and hygroscopic growth. Measurements made with the AOS form a long-term record at the ARM fixed sites. Shorter measurement records are available from mobile deployments in a wide variety of geographical regions. These measurements are valuable for: identifying long-term changes in aerosol properties identifying atmospheric processes controlling aerosol life cycle and their influence on clouds providing experimental data for developing and testing atmospheric climate models.

54 ENVIRONMENTAL SCIENCES↗

aosimpactor (a1)

The aerosol observing system (AOS) is the primary platform for in situ aerosol measurements at Earth’s surface. Each AOS has a different complement of instruments, which are selected to ensure the best measurements at each deployment site. The AOS measures aerosol optical properties to better understand how particles interact with solar radiation and influence the Earth's radiation balance. These measurements are useful for calculating parameters used in radiative forcing calculations, such as the aerosol single scattering albedo, asymmetry parameter, mass scattering efficiency, and hygroscopic growth. Measurements made with the AOS form a long-term record at the ARM fixed sites. Shorter measurement records are available from mobile deployments in a wide variety of geographical regions. These measurements are valuable for: identifying long-term changes in aerosol properties identifying atmospheric processes controlling aerosol life cycle and their influence on clouds providing experimental data for developing and testing atmospheric climate models.

54 ENVIRONMENTAL SCIENCES↗

aosimpactor (b1)

The aerosol observing system (AOS) is the primary platform for in situ aerosol measurements at Earth’s surface. Each AOS has a different complement of instruments, which are selected to ensure the best measurements at each deployment site. The AOS measures aerosol optical properties to better understand how particles interact with solar radiation and influence the Earth's radiation balance. These measurements are useful for calculating parameters used in radiative forcing calculations, such as the aerosol single scattering albedo, asymmetry parameter, mass scattering efficiency, and hygroscopic growth. Measurements made with the AOS form a long-term record at the ARM fixed sites. Shorter measurement records are available from mobile deployments in a wide variety of geographical regions. These measurements are valuable for: identifying long-term changes in aerosol properties identifying atmospheric processes controlling aerosol life cycle and their influence on clouds providing experimental data for developing and testing atmospheric climate models.

54 ENVIRONMENTAL SCIENCES↗

aosflow1 (a1)

The aerosol observing system (AOS) is the primary platform for in situ aerosol measurements at Earth’s surface. Each AOS has a different complement of instruments, which are selected to ensure the best measurements at each deployment site. The AOS measures aerosol optical properties to better understand how particles interact with solar radiation and influence the Earth's radiation balance. These measurements are useful for calculating parameters used in radiative forcing calculations, such as the aerosol single scattering albedo, asymmetry parameter, mass scattering efficiency, and hygroscopic growth. Measurements made with the AOS form a long-term record at the ARM fixed sites. Shorter measurement records are available from mobile deployments in a wide variety of geographical regions. These measurements are valuable for: identifying long-term changes in aerosol properties identifying atmospheric processes controlling aerosol life cycle and their influence on clouds providing experimental data for developing and testing atmospheric climate models.

54 ENVIRONMENTAL SCIENCES↗

aosflow2 (a1)

The aerosol observing system (AOS) is the primary platform for in situ aerosol measurements at Earth’s surface. Each AOS has a different complement of instruments, which are selected to ensure the best measurements at each deployment site. The AOS measures aerosol optical properties to better understand how particles interact with solar radiation and influence the Earth's radiation balance. These measurements are useful for calculating parameters used in radiative forcing calculations, such as the aerosol single scattering albedo, asymmetry parameter, mass scattering efficiency, and hygroscopic growth. Measurements made with the AOS form a long-term record at the ARM fixed sites. Shorter measurement records are available from mobile deployments in a wide variety of geographical regions. These measurements are valuable for: identifying long-term changes in aerosol properties identifying atmospheric processes controlling aerosol life cycle and their influence on clouds providing experimental data for developing and testing atmospheric climate models.

54 ENVIRONMENTAL SCIENCES↗

Dynamics, control and sensor issues pertinent to robotic hands for the EVA retriever system

Basic dynamics, sensor, control, and related artificial intelligence issues pertinent to smart robotic hands for the Extra Vehicular Activity (EVA) Retriever system are summarized and discussed. These smart hands are to be used as end effectors on arms attached to manned maneuvering units (MMU). The Retriever robotic systems comprised of MMU, arm and smart hands, are being developed to aid crewmen in the performance of routine EVA tasks including tool and object retrieval. The ultimate goal is to enhance the effectiveness of EVA crewmen.

Mclauchlan, Robert A.↗

Performance Benefits Associated with Context-Dependent Arm Pointing Adaptation

Our previous work has demonstrated that head orientation can be used as a contextual cue to switch between mUltiple adaptive states. Subjects were assigned to one of three groups: the head orientation group tilted the head towards the right shoulder when drawing under a 0.5 gain of display and towards the left shoulder when drawing under a 1.5 gain of display; the target orientation group had the home & target positions rotated counterclockwise when drawing under the 0.5 gain and clockwise for the l.5 gain; the arm posture group changed the elbow angle of the arm they were not drawing with from full flexion to full extension with 0.5 and l.5 gain display changes. The head orientation cue was effectively associated with the multiple gains, in comparison to the control conditions. The purpose of the current investigation was to determine whether this context-dependent adaptation results in any savings in terms of performance measures such as movement duration and movement smoothness when subjects switch between multiple adaptive states. Subjects in the head adaptation group demonstrated reduced movement duration and increased movement smoothness (measured via normalized j erk scores) in comparison to the two control groups when switching between the 0.5 and 1.5 gain. of display. This work has demonstrated not only that subjects can acquire context-dependent adaptation, but also that it results in a significant savings of performance upon transfer between adaptive states

Seidler, R. D.↗

The potential of high-frequency forced pulsed water jet for nuclear decommissioning - 15367

Forced Pulse Water Jetting (FPWJ) has been demonstrated in other works as a credible and consistent method for removing coatings or otherwise preparing surfaces across numerous industries. Its applicability to the nuclear industry as a powerful tool for decommissioning and waste treatment has only recently being recognized and underpinning study is required before any deployment can be considered. Use of FPWJ within the nuclear sector for decommissioning and waste treatment, requires a different degree of surface finish to achieve a decontamination effect or an assured performance. This necessitates a greater erosion of the base metal than in other industries. The addition of a Forced Pulse Modulation Unit (FPMU) to a high pressure water jetting system offers performance shifts akin to the differences between High Pressure (HP) and Ultra High Pressure (UHP) water jets. Trials have been undertaken in a controlled environment to establish the number of cycles to achieve a given mass loss and or depth of penetration that would otherwise provide decontamination of mostly flat or simple geometry surfaces using a robotic arm for consistency and safety. It has also been shown that metalwork can be readily penetrated without risk of explosion, for example to allow draining of a gas cylinder. Most nuclear facilities have a plethora of pipe systems spanning various diameters. A considerable portion of the UK Sellafield site has 2 inch bore pipe. The FPMU technology is being adapted to consider applications in enclosed systems, such as decontamination of pipes. Exploratory works to date show there to be many physical attributes that influence performance that include, standoff of the jet, established propagated forced pulse jet length, interference from resultant water spray and angle of attack. Comparatively small changes to these parameters can have a profound effect on performance. The process is capable of removing 10's microns to several mms of metal progressively and repeatedly. This enables a credible potential treatment of plant and equipment at Intermediate Level Waste and High Level Waste thresholds. In considering this as a treatment method, a balance between performance, cost and environmental impact of effluents must be made and will be studied further during future active trials. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A VO-seeded Approach for the Growth of Star-shaped VO2 and V2O5 Nanocrystals: Facile Synthesis Structural Characterization and Elucidation of Electronic Structure

Obtaining shape and size control of strongly correlated materials is imperative to obtain a fundamental understanding of the influence of finite size and surface restructuring on electronic instabilities in the proximity of the Fermi level. We present here a novel synthetic approach that takes advantage of the intrinsic octahedral symmetry of rock-salt-structured VO to facilitate the growth of six-armed nanocrystallites of related, technologically important binary vanadium oxides VO2 and V2O5. The prepared nanostructures exhibit clear six-fold symmetry and most notably show remarkable retention of electronic structure. The latter has been evidenced through extensive X-ray absorption spectroscopy measurements.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A design procedure for active control of beam vibrations

The transverse vibrations of beams is discussed and a methodology for the design of an active damping device is given. The Bernoulli-Euler equation is used to derive a transcendental transfer function, which relates a torque applied at one end of the beam to the rotational position and velocity at that point. The active damping device consists of a wire, a linear actuator and a short torque arm attached to one end of the beam. The action of the actuator varies a tension in the wire and creates a torque which opposes the rotation of the beam and thus damps vibration. A design procedure for such an active damper is given. This procedure shows the relationships and trade-offs between the actuator stroke, power required, stress levels in the wire and beam and the geometry of the beam and wire. It is shown that by consideration of the frequency response at the beam natural frequencies, the aforementioned relationships can be greatly simplified. Similarly, a simple way of estimating the effective damping ratios and eigenvalue locations of actively controlled beams is presented.

Dickerson, S. L.↗

The Early Career Research Program Annual Progress Report: Using ARM Data and Multiscale Models to Advance the Understanding of Liquid-Phase Cloud Response to Aerosol Perturbation over Ocean and Land

This project aims to study the response of liquid-phase clouds to aerosol perturbation and reduce the related uncertainty in the DOE Earth system model. Specific objectives include: Objective 1: Quantify the aerosol indirect effect on liquid-phase clouds using ARM observations and satellite retrievals while constraining the confounding large-scale conditions; Objective 2: Harness LES case studies, untangle the confounding meteorological impacts on the observed aerosol indirect effect, and identify key cloud processes controlling the net radiative forcing of aerosol-cloud interactions at different spatiotemporal scales; Objective 3: Evaluate the aerosol indirect effect on liquid-phase clouds with process-level understanding in E3SM multiscale model configurations.

54 ENVIRONMENTAL SCIENCES↗

Project Plan 7930 Cell G PaR Remote Handling System Replacement

For over 40 years the US Department of Energy (DOE) and its predecessors have made Californium-252 ({sup 252}Cf) available for a wide range of industries including medical, nuclear fuels, mining, military and national security. The Radiochemical Engineering Development Center (REDC) located within the Oak Ridge National Laboratory (ORNL) processes irradiated production targets from the High Flux Isotope Reactor (HFIR). Operations in Building 7930, Cell G provide over 70% of the world's demand for {sup 252}Cf. Building 7930 was constructed and equipped in the mid-1960s. Current operations for {sup 252}Cf processing in Building 7930, Cell G require use of through-the-wall manipulators and the PaR Remote Handling System. Maintenance and repairs for the manipulators is readily accomplished by removal of the manipulator and relocation to a repair shop where hands-on work can be performed in glove boxes. Contamination inside cell G does not currently allow manned entry and no provisions were created for a maintenance area inside the cell. There has been no maintenance of the PaR system or upgrades, leaving operations vulnerable should the system have a catastrophic failure. The Cell G PaR system is currently being operated in a run to failure mode. As the manipulator is now 40+ years old there is significant risk in this method of operation. In 2006 an assessment was completed that resulted in recommendations for replacing the manipulator operator control and power centers which are used to control and power the PaR manipulator in Cell G. In mid-2008 the chain for the bridge drive failed and subsequent examinations indicated several damaged links (see Figure 1). To continue operations the PaR manipulator arm is being used to push and pull the bridge as a workaround. A retrieval tool was fabricated, tested and staged inside Cell G that will allow positioning of the bridge and manipulator arm for removal from the cell should the PaR system completely fail. A fully functioning and reliable Par manipulator arm is necessary for uninterrupted {sup 252}Cf operations; a fully-functioning bridge is needed for the system to function as intended.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A global approach to kinematic path planning to robots with holonomic and nonholonomic constraints

Robots in applications may be subject to holonomic or nonholonomic constraints. Examples of holonomic constraints include a manipulator constrained through the contact with the environment, e.g., inserting a part, turning a crank, etc., and multiple manipulators constrained through a common payload. Examples of nonholonomic constraints include no-slip constraints on mobile robot wheels, local normal rotation constraints for soft finger and rolling contacts in grasping, and conservation of angular momentum of in-orbit space robots. The above examples all involve equality constraints; in applications, there are usually additional inequality constraints such as robot joint limits, self collision and environment collision avoidance constraints, steering angle constraints in mobile robots, etc. The problem of finding a kinematically feasible path that satisfies a given set of holonomic and nonholonomic constraints, of both equality and inequality types is addressed. The path planning problem is first posed as a finite time nonlinear control problem. This problem is subsequently transformed to a static root finding problem in an augmented space which can then be iteratively solved. The algorithm has shown promising results in planning feasible paths for redundant arms satisfying Cartesian path following and goal endpoint specifications, and mobile vehicles with multiple trailers. In contrast to local approaches, this algorithm is less prone to problems such as singularities and local minima.

Divelbiss, Adam↗

Development studies of Aurelia (jellyfish) ephyrae which developed during the SLS-1 mission

Aurelia polyps (scyphistomae) and ephyrae were exposed to microgravity for nine days aboard the space shuttle during the SLS-1 mission. During strobilation, polyps segment transversely and each segment develops into an ephyra. Polyps were induced to strobilate at 28 C, using iodine or thyroxine, at L(Launch)-48h, L-24h, and L+8h. Ephyrae developed in the groups tested in space and on Earth. The number of ephyrae formed per polyp was slightly higher in the L+8h groups as compared with those induced at L-24h and L-48h. On Earth, iodine is used by jellyfish to synthesize jellyfish-thyroxine (Jf T(sub 4)), needed for ephyra production. Since iodine-treated polyps strobilated and formed ephyrae in space, it appears that jellyfish can synthesize Jf-T(sub 4) in space. Indeed, two groups of polyps not given inducer formed ephryae in space, presumably due to enhanced Jf-T(sub 4) synthesis, utilization or accumulation. Some ephyrae that formed in space were also fixed in space on Mission Day (MD) 8; others were fixed post-flight. Examination of living ephyrae with the light microscope and fixed ones with the Scanning and Transmission Electron Microscopes revealed that those which developed in space were morphologically very similar to those which developed on Earth. Quantitation of arm numbers determined that there were no significant differences between space and Earth-developed ephyrae. Pulsing abnormalities, however, were found in greater number (18.3%) in space-developed ephyrae than in Earth-developed controls (2.9%). These abnormalities suggest abnormal development of the graviceptors, the neuromuscular system, or a defect in the integration between these systems in apparently microgravity-sensitive animals.

Spangenberg, D. B.↗

COLDArm Pressure-Sinkage Testing: Implications for Assessing Lunar Trafficability

The ability for regolith to support the movement of vehicles, known as trafficability, is commonly assessed using pressure-sinkage relationships. Trafficability on the lunar surface is controlled by the site-specific physical properties of the regolith and the geometry and mass of the roving vehicle. Lunar regolith pressure-sinkage testing can be performed with standard exploration hardware (e.g., robotic arms with scoops) and will help define exploration routes and hazard zones for rovers and astronauts, as knowledge of the sinkage of a wheel in regolith helps constrain viable operating conditions for rovers. The objective of this study is to demonstrate the necessity of in situ testing and characterization of lunar regolith physical properties for exploration and infrastructure development activities.

Regolith↗

COLDArm Pressure-Sinkage Testing: Implications for Assessing Lunar Trafficability

The ability for regolith to support the movement of vehicles, known as trafficability, is commonly assessed using pressure-sinkage relationships [1]. Trafficability on the lunar surface is controlled by the site-specific physical properties of the regolith and the geometry and mass of the roving vehicle. Lunar regolith pressure-sinkage testing can be performed with standard exploration hardware (e.g., robotic arms with scoops) and will help define exploration routes and hazard zones for rovers and astronauts, as knowledge of the sinkage of a wheel in regolith helps constrain viable operating conditions for rovers. The objective of this study is to demonstrate the necessity of in situ testing and characterization of lunar regolith physical properties for exploration and infrastructure development activities.

Regolith↗