Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

An unusual crystal growth method of the chalcohalide semiconductor, β-Hg 3 S 2 Cl 2 : A new candidate for hard radiation detection

Here, we assess the mercury chalcohalide compound, β-Hg 3 S 2 Cl 2 , as a potential semiconductor material for X-ray and γ-ray detection. It has a high density (6.80 g/cm 3 ) and wide band gap (2.56 eV) and crystallizes in the cubic Pm4$\bar{3}$n space group with a three-dimensional structure comprised of [Hg 12 S 8 ] cubes with Cl atoms located within and between the cubes, featuring a trigonal pyramidal SHg3 as the main building block. First-principle electronic structure calculations at the density functional theory level predict that the compound has closely lying indirect and direct band gaps. We have successfully grown transparent, single crystals of β-Hg 3 S 2 Cl 2 up to 7 mm diameter and 1 cm long using a new approach by the partial decomposition of the quaternary Hg 3 Bi 2 S 2 Cl 8 compound followed by the formation of β-Hg 3 S 2 Cl 2 and an impermeable top layer, all happening in situ during vertical Bridgman growth. The decomposition process was optimized by varying peak temperatures and temperature gradients using a 2 mm/h translation rate of the Bridgman technique. Formation of the quaternary Hg 3 Bi 2 S 2 Cl 8 followed by its partial decomposition into β-Hg 3 S 2 Cl 2 was confirmed by in situ temperature-dependent synchrotron powder diffraction studies. The single crystal samples obtained had resistivity of 10 10 Ω·cm and mobility-lifetime products of electron and hole carriers of 1.4(4) × 10 –4 cm 2 /V and 7.5(3) × 10 –5 cm 2 /V, respectively. Further, an appreciable Ag X-ray photoconductivity response was observed showing the potential of β-Hg 3 S 2 Cl 2 as a hard radiation detector material.

36 MATERIALS SCIENCE↗

Structure of {sup 46}Ti at low excitation energy

The nucleus {sup 46}Ti has been studied with the reaction {sup 42}Ca({sup 7}Li,p2n){sup 46}Ti at a bombarding energy of 31 MeV. Thin target foils backed with a thick Au layer were used. Five new levels of negative parity were observed. Several lifetimes have been determined with the Doppler shift attenuation method. Low-lying experimental negative-parity levels are assigned to three bands with K{sup {pi}=}3{sup -}, 0{sup -}, and 4{sup -}, which are interpreted in terms of the large-scale shell model, considering particle-hole excitations from d{sub 3/2} and s{sub 1/2} orbitals. Shell model calculations were performed using a few effective interactions. However, good agreement was not achieved in the description of either negative- or positive-parity low-lying levels.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Band offsets for mismatched interfaces: The special case of ZnO on CdTe (001)

High-quality planar interfaces between ZnO and CdTe would be useful in optoelectronic applications. Although CdTe is zinc blende with cubic lattice constant a = 6.482 Å while ZnO is hexagonal wurtzite with a = 3.253 Å and c = 5.213 Å, (001)-oriented cubic zinc blende ZnO films could be stabilized epitaxially on a CdTe (001) surface in an √2 × √2 R45° configuration with a lattice mismatch of <0.5%. Modeling such a configuration allows density-functional total-energy electronic-structure calculations to be performed on several interface arrangements (varying terminations and in-plane fractional translations) to identify the most likely form of the interface, and to predict valence-band offsets between CdTe and ZnO in each case. Growth of ZnO on Te-terminated CdTe(001) is predicted to produce small or even negative (CdTe below ZnO) valence band offsets, resulting in a Type I band alignment. Growth on Cd-terminated CdTe is predicted to produce large positive offsets for a Type II alignment as needed, for example, in solar cells. To corroborate some of these predictions, thin layers of ZnO were deposited on CdTe(001) by pulsed laser deposition, and the band alignments of the resulting heterojunctions were determined from x-ray photoelectron spectroscopy measurements. Although zinc blende ZnO could not be confirmed, the measured valence band offset (2.0–2.2 eV) matched well with the predicted value.

36 MATERIALS SCIENCE↗

Highly sensitive optical ammonia gas sensor based on Sn Doped V2O5 Nanoparticles

Highlights: • Facile synthesis of pure and Sn-doped vanadium oxide (V{sub 2}O{sub 5}) nanoparticles. • Fabrication of Optical ammonia gas sensors based on synthesized nanoparticles. • High optical sensing response (77.84%) for synthesized 2 wt% Sn doped V{sub 2}O{sub 5} nanoparticles towards ammonia gas. - Abstract: Herein, we present the synthesis, characterization and optical ammonia gas sensing of pure and Sn-doped vanadium oxide (V{sub 2}O{sub 5}) nanoparticles prepared by the sol-gel process. The V{sub 2}O{sub 5} nanoparticles were doped with Sn concentrations of 2 wt%–6 wt%, and characterized using X-ray diffraction, atomic force microscopy, UV–vis spectroscopy and photoluminescence spectroscopy which confirmed the orthorhombic crystal structure. The crystalline size was found to decrease with enhancing the doping concentrations of Sn. The lattice-strain and crystalline size with the peak-broadening of pure and Sn doped V{sub 2}O{sub 5} nanoparticles were analyzed by William-Hall (W-H) method and size-strain plot. The UV–vis absorption showed a decrease in the energy band gap (3.27 eV–3.07 eV) with an increase in the Sn doping concentration. The Sn-doped V{sub 2}O{sub 5} nanoparticles were used to detect ammonia gas (5–50 ppm) through photoluminescence based detection method. Interestingly, it was observed that the optical response for the 2 wt% Sn doped V{sub 2}O{sub 5} nanoparticles was maximum (77.84%) towards 50 ppm ammonia compared to other V{sub 2}O{sub 5}nanoparticles based samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Band properties of the transitional nucleus {sup 189}Pt

High-spin states in {sup 189}Pt have been studied with the in-beam gamma-spectroscopy method via the {sup 176}Yb({sup 18}O,5n) reaction at beam energies of 88 MeV and 95 MeV. A new level scheme of {sup 189}Pt has been established. Rotational bands based on the upsiloni{sub 13/2}{sup -1}, upsilonf{sub 5/2}(p{sub 3/2}) and upsiloni{sub 13/2}{sup -2}upsilonf{sub 5esol2}(p{sub 3/2}) configurations, as well as several structures with irregular level spacings, have been observed. Properties of rotational bands have been analyzed in the framework of triaxial particle-rotor model. A gammaapprox-30 deg. triaxial shape and a near prolate shape have been proposed to the upsiloni{sub 13/2}{sup -1} and upsilonf{sub 5/2}(p{sub 3/2}) bands, respectively. Two DELTAI = 2 transition sequences with similar energies have been observed, and they have been proposed to be associated with the upsiloni{sub 13/2}{sup -2}upsilonf{sub 5/2}(p{sub 3/2}) configuration. According to the relevant Nilsson orbitals, the bands built on the upsiloni{sub 13/2}{sup -2}upsilonf{sub 5/2}(p{sub 3/2}) configuration could be interpreted as a pair of pseudo-spin partner.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Selfsimilar and fractal analysis of n-type delta-doped quasiregular GaAs quantum wells

We study the electronic structure of n-type delta-doped quantum wells in GaAs in which the multiple well system is built according to the Fibonacci sequence. The building blocks A and B correspond to delta-doped wells with impurities densities n{sub 2DA} and n{sub 2DB}, and the same well width. The Thomas-Fermi approximation, the semi-empirical sp{sub 3}s* tight-binding model including spin, the Surface Green Function Matching method and the Transfer Matrix approach were implemented to obtain the confining potential, the electronic structure and the selfsimilarity of the spectrum. The fragmentation of the electronic spectra is observed whenever the building blocks A and B interact and it increases as the difference of impurities density between A and B increases as well. The wave function of the first sate of the fragmented bands presents critical characteristics, this is, it is not a localized state nor a extended one as well as it has selfsimilar features. So, the quasiregular characteristics are preserved irrespective of the complexity of the system and can affect the performance of devices based on these structures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dynamic control of spin wave spectra using spin-polarized currents

We describe a method of controlling the spin wave spectra dynamically in a uniform nanostripe waveguide through spin-polarized currents. A stable periodic magnetization structure is observed when the current flows vertically through the center of nanostripe waveguide. After being excited, the spin wave is transmitted at the sides of the waveguide. Numerical simulations of spin-wave transmission and dispersion curves reveal a single, pronounced band gap. Moreover, the periodic magnetization structure can be turned on and off by the spin-polarized current. The switching process from full rejection to full transmission takes place within less than 3 ns. Thus, this type magnonic waveguide can be utilized for low-dissipation spin wave based filters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomistic k ⋅ p theory

Pseudopotentials, tight-binding models, and k ⋅ p theory have stood for many years as the standard techniques for computing electronic states in crystalline solids. Here, we present the first new method in decades, which we call atomistic k ⋅ p theory. In its usual formulation, k ⋅ p theory has the advantage of depending on parameters that are directly related to experimentally measured quantities, however, it is insensitive to the locations of individual atoms. We construct an atomistic k ⋅ p theory by defining envelope functions on a grid matching the crystal lattice. The model parameters are matrix elements which are obtained from experimental results or ab initio wave functions in a simple way. This is in contrast to the other atomistic approaches in which parameters are fit to reproduce a desired dispersion and are not expressible in terms of fundamental quantities. This fitting is often very difficult. We illustrate our method by constructing a four-band atomistic model for a diamond/zincblende crystal and show that it is equivalent to the sp{sup 3} tight-binding model. We can thus directly derive the parameters in the sp{sup 3} tight-binding model from experimental data. We then take the atomistic limit of the widely used eight-band Kane model and compute the band structures for all III–V semiconductors not containing nitrogen or boron using parameters fit to experimental data. Our new approach extends k ⋅ p theory to problems in which atomistic precision is required, such as impurities, alloys, polytypes, and interfaces. It also provides a new approach to multiscale modeling by allowing continuum and atomistic k ⋅ p models to be combined in the same system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Energy band gap and spectroscopic studies in Mn{sub 1-x}Cu{sub x}WO{sub 4} (0 ≤ x ≤ 0.125)

A study on the effect of nonmagnetic Cu{sup 2+} substitution at Mn{sup 2+} site on the structural and energy band gap of the MnWO{sub 4} is reported. Convenient solid state reaction route has been adopted for the synthesis of Mn{sub 1-x}Cu{sub x}WO{sub 4}. X-ray diffraction (XRD) pattern showed high crystalline quality of the prepared samples. Raman spectroscopic studies were carried out to understand the structural aspects of the doping. 15 Raman active modes were identified out of 18, predicted for wolframite type monoclinic structure of MnWO{sub 4}. UV-visible diffuse reflectance spectra were recorded and analyzed to get energy band gap of the studied system and are found in the range of 2.5 eV to 2.04 eV with a systematic decrease with the increase in Cu{sup 2+} concentration. Energy band gap values are verified by Density Functional Theory calculations based on projector augmented wave (PAW) method. The calculated values are in good agreement with the experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic properties of lithium zinc ferrites synthesized by microwave sintered method

In this paper, a series of polycrystalline ferrite samples were prepared with the composition of Zn{sub 0.1}Li{sub 0.525-x}Ti{sub 0.15}Mg{sub x}Fe{sub 2.225-0.5x}O{sub 4} (LiZn) (x=0, 0.05, 0.10, 0.15 and 0.20) using both microwave sintering (MS) and conventional sintering (CS) technologies, respectively. The sintering time and temperature were 22 hours and 1000°C for the CS process, and 2 hours and 880°C for the MS process. Experiments showed that the MS treated LiZn ferrites exhibited more excellent magnetic properties and denser, more uniform micro-structures comparing with the ones treated by CS method. For the LiZn ferrite (x=0.1) sintered at 880°C using MS, the saturation magnetic induction (Bs) is 242.3 mT, the coercive force (Hc) is 135 A/m, the square ratio (Br/Bs) is 0.87 and the ferromagnetic resonance line-width (Δ H) is 143.2 Oe. These results represented very good properties for an X-band phase shifter material and indicated that the MS method is a potentially important technique for fabricating low temperature co-fired ceramics (LTCC).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Room temperature ferromagnetism and luminescent behavior of Ni doped ZnO nanoparticles prepared by coprecipitation method

The samples of Zn{sub 1-x}Ni{sub x}O (x= 0.00 and 0.05) were prepared using coprecipitation method and annealed at different temperatures. The effect of Ni ion substitution on the structural and optical properties has been studied using X-ray Diffraction, UV-Visible, Photoluminescence and Magnetic measurements. XRD measurements demonstrate that all the prepared samples are wurtzite polycrystalline single phase in nature, ruling out the presence of any secondary phase formation. Ultraviolet visible measurements showed a decrease in band gap with the increase in annealing temperature and doping concentration. The PL data shows the red shift in all the samples and luminescence quenching with Ni doping. Compared to undoped ZnO, Ni doped ZnO showed room temperature ferromagnetism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Insights on finite size effects in ab initio study of CO adsorption and dissociation on Fe 110 surface

Adsorption and dissociation of hydrocarbons on metallic surfaces represent crucial steps on the path to carburization, eventually leading to dusting corrosion. While adsorption of CO molecules on Fe surface is a barrier-less exothermic process, this is not the case for the dissociation of CO into C and O adatoms and the diffusion of C beneath the surface that are found to be associated with large energy barriers. In practice, these barriers can be affected by numerous factors that combine to favour the CO-Fe reaction such as the abundance of CO and other hydrocarbons as well as the presence of structural defects. From a numerical point of view, studying these factors is challenging and a step-by-step approach is necessary to assess, in particular, the influence of the finite box size on the reaction parameters for adsorption and dissociation of CO on metal surfaces. Here, we use density functional theory (DFT) total energy calculations with the climbing-image nudged elastic band method to estimate the adsorption energies and dissociation barriers for different CO coverages with surface supercells of different sizes. We further compute the effect of periodic boundary condition for DFT calculations and find that the contribution from van der Waals interaction in the computation of adsorption parameters is important as they contribute to correcting the finite-size error in small systems. The dissociation process involves carbon insertion into the Fe surface causing a lattice deformation that requires a larger surface system for unrestricted relaxation. We show that, in the larger surface systems associated with dilute CO-coverages, C-insertion is energetically more favourable, leading to a significant decrease in the dissociation barrier. This observation suggests that a large surface system with dilute coverage is necessary for all similar metal-hydrocarbon reactions in order to study their fundamental electronic mechanisms, as an isolated phenomenon, free from finite-size effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microwave absorption characteristics of the clouds of Venus from Mariner 10 radio occultation

Measurements of received signal strength at S-band (13 cm) and X-band (4.8 cm) wavelengths during the radio occultation of Mariner 10 by Venus on February 5, 1974, are examined in order to study the structure and composition of the absorbing medium. The frequency excursions of the signals are determined and used to obtain the structure of the refractive index in the lower atmosphere. Profiles of excess signal attenuation due to atmospheric scattering and absorption are presented which indicate that the X-band signal experienced much more absorption and was extinguished at about 50 km, while the S-band signal penetrated to about 42 km. The optical-depth data are inverted by means of a discrete inversion method to obtain the absorption coefficient for each band as a function of height, and the resulting absorption-coefficient profiles are compared with the attenuation at vertical incidence modeled from planetary radar and passive microwave observations of Venus. The absorption coefficients at the two wavelengths are employed to estimate the liquid content and composition of the microwave-absorbing cloud particles.

Kliore, A. J.↗

Quantum chemical calculations for polymers and organic compounds

The relativistic effects of the orbiting electrons on a model compound were calculated. The computational method used was based on 'Modified Neglect of Differential Overlap' (MNDO). The compound tetracyanoplatinate was used since empirical measurement and calculations along "classical" lines had yielded many known properties. The purpose was to show that for large molecules relativity effects could not be ignored and that these effects could be calculated and yield data in closer agreement to empirical measurements. Both the energy band structure and molecular orbitals are depicted.

Lopez, J.↗

Recent advances in engineering science; Proceedings of the A. Cemal Eringen Symposium, University of California, Berkeley, June 20-22, 1988

Various papers on recent advances in engineering science are presented. Some individual topics addressed include: advances in adaptive methods in computational fluid mechanics, mixtures of two medicomorphic materials, computer tests of rubber elasticity, shear bands in isotropic micropolar elastic materials, nonlinear surface wave and resonator effects in magnetostrictive crystals, simulation of electrically enhanced fibrous filtration, plasticity theory of granular materials, dynamics of viscoelastic media with internal oscillators, postcritical behavior of a cantilever bar, boundary value problems in nonlocal elasticity, stability of flexible structures with random parameters, electromagnetic tornadoes in earth's ionosphere and magnetosphere, helicity fluctuations and the energy cascade in turbulence, mechanics of interfacial zones in bonded materials, propagation of a normal shock in a varying area duct, analytical mechanics of fracture and fatigue.

Koh, Severino L.↗

Efficient use of high performance computers for integrated controls and structures design

Simply transporting design codes from sequential-scalar computers to parallel-vector computers does not fully utilize the computational benefits offered by high performance computers. By performing integrated controls and structures design on an experimental truss platform with both sequential-scalar and parallel-vector design codes, conclusive results are presented to substantiate this claim. The efficiency of a Cholesky factorization scheme in conjunction with a variable-band row data structure is presented. In addition, the Lanczos eigensolution algorithm has been incorporated in the design code for both parallel and vector computations. Comparisons of computational efficiency between the initial design code and the parallel-vector design code are presented. It is shown that the Lanczos algorithm with the Cholesky factorization scheme is far superior to the sub-space iteration method of eigensolution when substantial numbers of eigenvectors are required for control design and/or performance optimization. Integrated design results show the need for continued efficiency studies in the area of element computations and matrix assembly.

Belvin, W. K.↗

Some practicable applications of quadtree data structures/representation in astronomy

Development of quadtree as hierarchical data structuring technique for representing spatial data (like points, regions, surfaces, lines, curves, volumes, etc.) has been motivated to a large extent by storage requirements of images, maps, and other multidimensional (spatially structured) data. For many spatial algorithms, time-efficiency of quadtrees in terms of execution may be as important as their space-efficiency concerning storage conditions. Briefly, the quadtree is a class of hierarchical data structures which is based on the recursive partition of a square region into quadrants and sub-quadrants until a predefined limit. Beyond the wide applicability of quadtrees in image processing, spatial information analysis, and building digital databases (processes becoming ordinary for the astronomical community), there may be numerous further applications in astronomy. Some of these practicable applications based on quadtree representation of astronomical data are presented and suggested for further considerations. Examples are shown for use of point as well as region quadtrees. Statistics of different leaf and non-leaf nodes (homogeneous and heterogeneous sub-quadrants respectively) at different levels may provide useful information on spatial structure of astronomical data in question. By altering the principle guiding the decomposition process, different types of spatial data may be focused on. Finally, a sampling method based on quadtree representation of an image is proposed which may prove to be efficient in the elaboration of sampling strategy in a region where observations were carried out previously either with different resolution or/and in different bands.

Pasztor, L.↗

A New Spin for Understanding the Peculiar Horizontal Branch Morphology of the Galactic Globular Clusters NGC 6388 and NGC 6441

In this paper we present multiband optical and UV Hubble Space Telescope photometry of the two Galactic globular clusters NGC 6388 and NGC 6441 Aims. We investigate the properties of their anomalous horizontal branches (HB) in different photometric planes in order to shed light on the nature of the physical mechanism(s) responsible for the existence of an extended HB blue tail, and of a slope in the HB, visible in all the color-magnitude diagrams. Methods. New photometric data have been collected and carefully reduced. Empirical data have been compared with updated stellar models of low-mass, metal-rich, He-burning structures, transformed to the observational plane with appropriate atmosphere models. Results. We have obtained the first UV color-magnitude diagrams for NGC 6388 and NGC 6441. These diagrams confirm previous results, obtained in optical bands, about the presence of a sizeable stellar population of extremely hot Horizontal Branch stars. At least in NGC 6388, we find a clear indication that at the hot end of the horizontal branch the distribution of stars forms a hook-like feature, closely resembling those observed in NGC 2808 and w Centauri. We briefly review the theoretical scenarios which have been suggested for interpreting this observational feature. We investigate also on the tilt in the horizontal branch morphology, and provide further evidence that supports early suggestions according to which this feature cannot be interpreted as an effect of differential reddening or radiative levitation, though these effects contribute to create the anomaly. We demonstrate that a possible solution of the puzzle is to assume that a small fraction (approx. 13% in NGC 6388 and approx. 8% NGC 6441) of the stellar population in the two clusters is strongly helium enriched (Y approx. 0.40 in NGC6388 and Y approx. 0.35 in NGC 6441). This solution necessarily implies the presence of a double generation of stars in the two clusters.

Busso, G.↗