Search NASA⌕ Search

SEARCH · Search NASA

Results for “Behavior analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Architectural Modeling and Analysis for Safety Engineering

Model-based development tools are increasingly being used for system-level development of safety-critical systems. Architectural and behavioral models provide important information that can be leveraged to improve the system safety analysis process. Model-based design artifacts produced in early stage development activities can be used to perform system safety analysis, reducing costs and providing accurate results throughout the system life-cycle. In this report we describe an extension to the Architecture Analysis and Design Language (AADL) that supports modeling of system behavior under failure conditions. This Safety Annex enables the independent modeling of component failures and allows safety engineers to weave various types of fault behavior into the nominal system model. The accompanying tool support uses model checking to propagate errors from their source to their effect on safety properties without the need to add separate propagation specifications. The tool also captures all minimal set of fault combinations that can cause violation of the safety properties, that can be compared to qualitative and quantitative objectives as part of the safety assessment process. We describe the Safety Annex, illustrate its use with a representative example, and discuss and demonstrate the tool support enabling an analyst to investigate the system behavior under failure conditions.

FTA↗

Heart rate dynamics before spontaneous onset of ventricular fibrillation in patients with healed myocardial infarcts

The traditional methods of analyzing heart rate (HR) variability have failed to predict imminent ventricular fibrillation (VF). We sought to determine whether new methods of analyzing RR interval variability based on nonlinear dynamics and fractal analysis may help to detect subtle abnormalities in RR interval behavior before the onset of life-threatening arrhythmias. RR interval dynamics were analyzed from 24-hour Holter recordings of 15 patients who experienced VF during electrocardiographic recording. Thirty patients without spontaneous or inducible arrhythmia events served as a control group in this retrospective case control study. Conventional time- and frequency-domain measurements, the short-term fractal scaling exponent (alpha) obtained by detrended fluctuation analysis, and the slope (beta) of the power-law regression line (log power - log frequency, 10(-4)-10(-2) Hz) of RR interval dynamics were determined. The short-term correlation exponent alpha of RR intervals (0.64 +/- 0.19 vs 1.05 +/- 0.12; p <0.001) and the power-law slope beta (-1.63 +/- 0.28 vs -1.31 +/- 0.20, p <0.001) were lower in the patients before the onset of VF than in the control patients, but the SD and the low-frequency spectral components of RR intervals did not differ between the groups. The short-term scaling exponent performed better than any other measurement of HR variability in differentiating between the patients with VF and controls. Altered fractal correlation properties of HR behavior precede the spontaneous onset of VF. Dynamic analysis methods of analyzing RR intervals may help to identify abnormalities in HR behavior before VF.

Non-NASA Center↗

International Space Station (ISS) S-Band Corona Discharge Anomaly Consultation

The Assembly and Contingency Radio Frequency Group (ACRFG) onboard the International Space Station (ISS) is used for command and control communications and transmits (45 dBm or 32 watts) and receives at S-band. The system is nominally pressurized with gaseous helium (He) and nitrogen (N2) at 8 pounds per square inch absolute (psia). MacDonald, Dettwiler and Associates Ltd. (MDA) was engaged to analyze the operational characteristics of this unit in an effort to determine if the anomalous behavior was a result of a corona event. Based on this analysis, MDA did not recommend continued use of this ACRFG. The NESC was requested to provide expert support in the area of high-voltage corona and multipactoring in an S-Band RF system and to assess the probability of corona occurring in the ACRFG during the planned EVA. The NESC recommended minimal continued use of S/N 002 ACRFG until a replacement unit can be installed. Following replacement, S/N 002 will be subjected to destructive failure analysis in an effort to determine the proximate and root cause(s) of the anomalous behavior.

Kichak, Robert A.↗

Computer-Aided Modeling and Analysis of Power Processing Systems (CAMAPPS), phase 1

The large-signal behaviors of a regulator depend largely on the type of power circuit topology and control. Thus, for maximum flexibility, it is best to develop models for each functional block a independent modules. A regulator can then be configured by collecting appropriate pre-defined modules for each functional block. In order to complete the component model generation for a comprehensive spacecraft power system, the following modules were developed: solar array switching unit and control; shunt regulators; and battery discharger. The capability of each module is demonstrated using a simplified Direct Energy Transfer (DET) system. Large-signal behaviors of solar array power systems were analyzed. Stability of the solar array system operating points with a nonlinear load is analyzed. The state-plane analysis illustrates trajectories of the system operating point under various conditions. Stability and transient responses of the system operating near the solar array's maximum power point are also analyzed. The solar array system mode of operation is described using the DET spacecraft power system. The DET system is simulated for various operating conditions. Transfer of the software program CAMAPPS (Computer Aided Modeling and Analysis of Power Processing Systems) to NASA/GSFC (Goddard Space Flight Center) was accomplished.

Kim, S.↗

Enabling Dynamic Probabilistic Risk Assessment of Physical Security Using EMRALD and MAAP

The optimization of physical security in nuclear power plants requires sophisticated methodologies that integrate operator actions and plant behavior through advanced simulation tools. To address this, Idaho National Laboratory [JL2.1]has developed the Modeling and Analysis for Safety and Security using the Dynamic EMRALD Framework (MASS-DEF) methodology, an approach that integrates force-on-force simulations, dynamic probabilistic risk assessment, and thermal-hydraulics modeling [JL3.1]to enhance security planning while reducing costs. We developed a tool that produces reduced order models using thermal hydraulic simulations from the Modular Accident Analysis Program (MAAP) [1]. These models can quickly evaluate reactor core behavior during attack simulations, and in so doing, address two barriers of traditional methods: (1) MAAP simulations are computationally intensive, and (2) attack scenarios must be run in a secure environment, which complicates analysis and validation. By precomputing scenario outcomes for a small number of modified parameters, the reduced order model significantly decreases the computational cost and enables offsite review of the results.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Scaling Behavior of a Turbulent Kinetic Energy Closure Scheme for the Stably Stratified Atmosphere: A Steady-State Analysis

Abstract We present a turbulent kinetic energy (TKE) closure scheme for the stably stratified atmosphere in which the mixing lengths for momentum and heat are not parameterized in the same manner. The key difference is that, while the mixing length for heat tends toward the stability independent mixing length for momentum in neutrally stratified conditions, it tends toward one based on the Brunt–Väisälä time scale and square root of the TKE in the limit of large stability. This enables a unique steady-state solution for TKE to be obtained, which we demonstrate would otherwise be impossible if the mixing lengths were the same. Despite the model’s relative simplicity, it is shown to perform reasonably well with observational data from the 1999 Cooperative Atmosphere–Surface Exchange Study (CASES-99) using commonly employed model constants. Analyzing the scaling behavior of the nondimensional velocity and potential temperature gradients, or of the stability (correction) functions, reveals that for large stability the present model scales in the same manner as the first-order operational scheme of Viterbo et al. Alternatively, it appears as a blend of two cases of the TKE closure scheme of Baas et al. Critically, because a unique steady-state TKE can be obtained, the present model avoids the nonphysical behavior identified in one of the cases of Baas et al.

Meteorology & Atmospheric Sciences↗

Nonlinear Time Domain Seismic Soil-Structure Interaction (SSI) Deep Soil Site Methodology Development

Currently the Department of Energy (DOE) and the nuclear industry perform seismic soil-structure interaction (SSI) analysis using equivalent linear numerical analysis tools. For lower levels of ground motion, these tools should produce reasonable in-structure response values for evaluation of existing and new facilities. For larger levels of ground motion these tools likely overestimate the in-structure response (and therefore structural demand) since they do not consider geometric nonlinearities (such as gaping and sliding between the soil and structure) and are limited in the ability to model nonlinear soil behavior. The current equivalent linear SSI (SASSI) analysis approach either joins the soil and structure together in both tension and compression or releases the soil from the structure for both tension and compression. It also makes linear approximations for material nonlinearities and generalizes energy absorption with viscous damping. This produces the potential for inaccurately establishing where the structural concerns exist and/or inaccurately establishing the amplitude of the in-structure responses. Seismic hazard curves at nuclear facilities have continued to increase over the years as more information has been developed on seismic sources (i.e. faults), additional information gathered on seismic events, and additional research performed to determine local site effects. Seismic hazard curves are used to develop design basis earthquakes (DBE) that are used to evaluate nuclear facility response. As the seismic hazard curves increase, the input ground motions (DBE’s) used to numerically evaluation nuclear facility response increase causing larger in-structure response. As ground motions increase so does the importance of including nonlinear effects in numerical SSI models. To include material nonlinearity in the soil and geometric nonlinearity using contact (gaping and sliding) it is necessary to develop a nonlinear time domain methodology. This methodology will be known as, NonLinear Soil-Structure Interaction (NLSSI). In general NLSSI analysis should provide a more accurate representation of the seismic demands on nuclear facilities their systems and components. INL, in collaboration with a Nuclear Power Plant Vender (NPP-V), will develop a generic Nuclear Power Plant (NPP) structural design to be used in development of the methodology and for comparison with SASSI. This generic NPP design has been evaluated for the INL soil site because of the ease of access and quality of the site specific data. It is now being evaluated for a second site at Vogtle which is located approximately 15 miles East-Northeast of Waynesboro, Georgia and adjacent to Savanna River. The Vogtle site consists of many soil layers spanning down to a depth of 1058 feet. The reason that two soil sites are chosen is to demonstrate the methodology across multiple soil sites. The project will drive the models (soil and structure) using successively increasing acceleration time histories with amplitudes. The models will be run in time domain codes such as ABAQUS, LS-DYNA, and/or ESSI and compared with the same models run in SASSI. The project is focused on developing and documenting a method for performing time domain, non-linear seismic soil structure interaction (SSI) analysis. Development of this method will provide the Department of Energy (DOE) and industry with another tool to perform seismic SSI analysis.

58 GEOSCIENCES↗

Numerical framework for integrated additive manufacturing-compression molding (AM-CM) of thermoplastic composites

Additive manufacturing-compression molding (AM-CM) has emerged as a transformative technology in advanced composite manufacturing. Additive manufacturing (AM) offers high design flexibility and the ability to produce complex geometries with precisely aligned fibers in the preferred orientation. Compression molding (CM) enhances composite materials by providing excellent dimensional stability, reduced porosity, high production rates, and a smooth surface finish. Despite these advantages, extensive integrated analysis is required to optimize processing conditions for improved fiber orientation distribution (FOD) and porosity control. Here, this study develops a comprehensive numerical model to simulate the AM-CM manufacturing process. The model isolates the effects of both the AM and CM phases while also capturing their integration. Additionally, it accounts for heat transfer, temperature-dependent viscosity, and fiber orientation in the extruded fiber-filled polymer, accurately representing material behavior during processing. This approach enables the analysis of interactions between deposited beads of complex strand shapes and their interface regions after full compression. Moreover, the model predicts key parameters such as polymer flowability, fiber orientation, and temperature evolution in AM-CM parts. By optimizing processing conditions, it facilitates a controlled and predictable microstructure.

36 MATERIALS SCIENCE↗

On the mechanical behavior of a Nb 3 Sn superconducting coil during a quench: Two-dimensional finite element analysis of a quench heater protected magnet

New high-field accelerator magnets based on $Nb_3Sn$ superconductors are pushing the boundaries of magnet design and quench protection towards new limits. While their large stored energies and current densities result in a very challenging scenario for magnet protection, their great electromagnetic forces create also new requirements in terms of magnet design and stress management techniques. Furthermore, the strain sensitivity of $Nb_3Sn$ cables turns the electro-mechanical limits of the conductor into a parameter of the highest importance, where conductor degradation becomes a critical aspect in magnet operation. The coupling of all the above-mentioned considerations during quench is a case of special interest that adds further complexity to the design of $Nb_3Sn$ magnets. The objective of this paper is to provide a complete two-dimensional investigation of the coil and magnet structure mechanics during a quench event. Here, the analysis is performed using a combination of finite element codes that provide the necessary input for the mechanical study. The core of the modelling strategy relies on a thermal-electric model, whose results are directly used as loads in the mechanical simulation. In doing so, the stress evolution during and after a quench is obtained. We focus for this time in the analysis of a quench heater protected magnet, where dynamic effects are of less importance in contrast to other protection systems like CLIQ.

43 PARTICLE ACCELERATORS↗

Analysis Of Fractures In Sublaminates

Computational procedure developed to predict mechanical behavior and interactions of individual plies or sublaminates of fiber/matrix laminate structures. Embodied in computer code, procedure useful for computation of stresses in regions affected by delaminations, transverse cracks, discontinuities caused by manufacturing errors, configurations, and loading conditions. Analysis applied to all layers in laminate or to only few layers surrounding defects.

Valisetty, R. R.↗

Seismic Assessment of Buildings: Proposal of a New Modified Uncoupled Modal Response History Analysis

This paper develops a new modified uncoupled modal response history analysis (M-UMRHA) in order to study the seismic behavior of structures. It aims to provide an acceptable accuracy with reduced calculation duration in comparison to complete analysis, i.e. the THA. The proposed method improves the existing UMRHA, developed by Chopra and Goel [1], by considering an energy based approach to build the capacity curve [2] and a pseudo-adaptive feature to account for changes in modal shapes after yielding, motivated by an adaptive method [3]. Validation is made by comparison with NLTHA as well as other simplified methods. Low and medium-rise RC buildings were analyzed under real ground motion records. Results show good estimates of structural parameters and give good correlation between damage and story displacements as well as drifts. Like other simplified methods, accuracy decreases in the inelastic domain. However, this procedure gives acceptable estimates of structural response with a few additional calculations and it has the potential to be used in large scale studies, and probabilistic approaches.

42 ENGINEERING↗

Effects of excess Fe on upper critical field and magnetotransport in Fe 1 + y ( Te 1 - x S x ) z

We have investigated the upper critical field anisotropy and magnetotransport properties of Fe 1.14 ( 1 ) Te 0.91 ( 2 ) S 0.09 ( 2 ) single crystals in stable magnetic fields up to 35 T. The results show that μ 0 H c 2 ( T ) along the c axis and in the a b plane exhibit saturation at low temperatures. The anisotropy of μ 0 H c 2 ( T ) decreases with decreasing temperature, becoming nearly isotropic for T → 0 . Our analysis indicates that the spin-paramagnetic pair breaking with spin-orbital scattering is responsible for the behavior of μ 0 H c 2 ( T ) . Furthermore, from analysis of the normal-state properties, we show evidence that the excess Fe is a key factor determining the normal- and superconducting-state physical properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

2017 Puget Sound Regional Travel Study

# 2017 Puget Sound Regional Travel Study The 2017 Puget Sound Regional Travel Study collected household- and person-level activity and travel pattern information from residents throughout the Puget Sound Regional Council's four-county region in Washington State. It followed the [2014-2015 Puget Sound Regional Travel Study](https://www.nrel.gov/transportation/secure-transportation-data/tsdc-puget-sound-travel-study), starting a planned six-year data collection that includes 2019 and 2021. The multiyear program's goal is to maintain an updated source of household travel behavior data that: - Supports modeling and planning needs - Facilitates trend analysis over time - Allows for regular study design updates to integrate evolving data collection methods and emerging travel behaviors and transportation issues. ## Data Collection Agency The Puget Sound Regional Council conducted the study. ## Methodology The 2017 study featured both the design and administration of a one-day household travel diary (approximately 80% of households before data cleaning) and a seven-day smartphone global positioning system (GPS) diary (approximately 20% of households before data cleaning). It combined data collection methods, including smartphone, online, and telephone. The survey design included several stages to recruit and collect data about households, their members, and their travel behaviors during the assigned travel period. ## Survey Records Survey records include a total of 6,254 participants. ## More Information For more information, see the [survey documentation](https://www.nrel.gov/media/docs/libraries/tsdc/zip/tsdc-2017-puget-sound-travel-study-documentation.zip?sfvrsn=45991f2f_1). ## Transportation Data The data set contains a demographic and socioeconomic composition of 6,254 people from 3,285 households in the Puget Sound regional area, as well as detailed information on the travel behavior of each household for a designated 24-hour period. The survey logged over 508 thousand vehicle miles of travel by participants during 52,492 trips. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2017 Puget Sound Regional Travel Study

# 2017 Puget Sound Regional Travel Study The 2017 Puget Sound Regional Travel Study collected household- and person-level activity and travel pattern information from residents throughout the Puget Sound Regional Council's four-county region in Washington State. It followed the [2014-2015 Puget Sound Regional Travel Study](https://www.nrel.gov/transportation/secure-transportation-data/tsdc-puget-sound-travel-study), starting a planned six-year data collection that includes 2019 and 2021. The multiyear program's goal is to maintain an updated source of household travel behavior data that: - Supports modeling and planning needs - Facilitates trend analysis over time - Allows for regular study design updates to integrate evolving data collection methods and emerging travel behaviors and transportation issues. ## Data Collection Agency The Puget Sound Regional Council conducted the study. ## Methodology The 2017 study featured both the design and administration of a one-day household travel diary (approximately 80% of households before data cleaning) and a seven-day smartphone global positioning system (GPS) diary (approximately 20% of households before data cleaning). It combined data collection methods, including smartphone, online, and telephone. The survey design included several stages to recruit and collect data about households, their members, and their travel behaviors during the assigned travel period. ## Survey Records Survey records include a total of 6,254 participants. ## More Information For more information, see the [survey documentation](https://www.nrel.gov/media/docs/libraries/tsdc/zip/tsdc-2017-puget-sound-travel-study-documentation.zip?sfvrsn=45991f2f_1). ## Transportation Data The data set contains a demographic and socioeconomic composition of 6,254 people from 3,285 households in the Puget Sound regional area, as well as detailed information on the travel behavior of each household for a designated 24-hour period. The survey logged over 508 thousand vehicle miles of travel by participants during 52,492 trips. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2017 Puget Sound Regional Travel Study

# 2017 Puget Sound Regional Travel Study The 2017 Puget Sound Regional Travel Study collected household- and person-level activity and travel pattern information from residents throughout the Puget Sound Regional Council's four-county region in Washington State. It followed the [2014-2015 Puget Sound Regional Travel Study](https://www.nrel.gov/transportation/secure-transportation-data/tsdc-puget-sound-travel-study), starting a planned six-year data collection that includes 2019 and 2021. The multiyear program's goal is to maintain an updated source of household travel behavior data that: - Supports modeling and planning needs - Facilitates trend analysis over time - Allows for regular study design updates to integrate evolving data collection methods and emerging travel behaviors and transportation issues. ## Data Collection Agency The Puget Sound Regional Council conducted the study. ## Methodology The 2017 study featured both the design and administration of a one-day household travel diary (approximately 80% of households before data cleaning) and a seven-day smartphone global positioning system (GPS) diary (approximately 20% of households before data cleaning). It combined data collection methods, including smartphone, online, and telephone. The survey design included several stages to recruit and collect data about households, their members, and their travel behaviors during the assigned travel period. ## Survey Records Survey records include a total of 6,254 participants. ## More Information For more information, see the [survey documentation](https://www.nrel.gov/media/docs/libraries/tsdc/zip/tsdc-2017-puget-sound-travel-study-documentation.zip?sfvrsn=45991f2f_1). ## Transportation Data The data set contains a demographic and socioeconomic composition of 6,254 people from 3,285 households in the Puget Sound regional area, as well as detailed information on the travel behavior of each household for a designated 24-hour period. The survey logged over 508 thousand vehicle miles of travel by participants during 52,492 trips. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2017 Puget Sound Regional Travel Study

# 2017 Puget Sound Regional Travel Study The 2017 Puget Sound Regional Travel Study collected household- and person-level activity and travel pattern information from residents throughout the Puget Sound Regional Council's four-county region in Washington State. It followed the [2014-2015 Puget Sound Regional Travel Study](https://www.nrel.gov/transportation/secure-transportation-data/tsdc-puget-sound-travel-study), starting a planned six-year data collection that includes 2019 and 2021. The multiyear program's goal is to maintain an updated source of household travel behavior data that: - Supports modeling and planning needs - Facilitates trend analysis over time - Allows for regular study design updates to integrate evolving data collection methods and emerging travel behaviors and transportation issues. ## Data Collection Agency The Puget Sound Regional Council conducted the study. ## Methodology The 2017 study featured both the design and administration of a one-day household travel diary (approximately 80% of households before data cleaning) and a seven-day smartphone global positioning system (GPS) diary (approximately 20% of households before data cleaning). It combined data collection methods, including smartphone, online, and telephone. The survey design included several stages to recruit and collect data about households, their members, and their travel behaviors during the assigned travel period. ## Survey Records Survey records include a total of 6,254 participants. ## More Information For more information, see the [survey documentation](https://www.nrel.gov/media/docs/libraries/tsdc/zip/tsdc-2017-puget-sound-travel-study-documentation.zip?sfvrsn=45991f2f_1). ## Transportation Data The data set contains a demographic and socioeconomic composition of 6,254 people from 3,285 households in the Puget Sound regional area, as well as detailed information on the travel behavior of each household for a designated 24-hour period. The survey logged over 508 thousand vehicle miles of travel by participants during 52,492 trips. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2017 Puget Sound Regional Travel Study

# 2017 Puget Sound Regional Travel Study The 2017 Puget Sound Regional Travel Study collected household- and person-level activity and travel pattern information from residents throughout the Puget Sound Regional Council's four-county region in Washington State. It followed the [2014-2015 Puget Sound Regional Travel Study](https://www.nrel.gov/transportation/secure-transportation-data/tsdc-puget-sound-travel-study), starting a planned six-year data collection that includes 2019 and 2021. The multiyear program's goal is to maintain an updated source of household travel behavior data that: - Supports modeling and planning needs - Facilitates trend analysis over time - Allows for regular study design updates to integrate evolving data collection methods and emerging travel behaviors and transportation issues. ## Data Collection Agency The Puget Sound Regional Council conducted the study. ## Methodology The 2017 study featured both the design and administration of a one-day household travel diary (approximately 80% of households before data cleaning) and a seven-day smartphone global positioning system (GPS) diary (approximately 20% of households before data cleaning). It combined data collection methods, including smartphone, online, and telephone. The survey design included several stages to recruit and collect data about households, their members, and their travel behaviors during the assigned travel period. ## Survey Records Survey records include a total of 6,254 participants. ## More Information For more information, see the [survey documentation](https://www.nrel.gov/media/docs/libraries/tsdc/zip/tsdc-2017-puget-sound-travel-study-documentation.zip?sfvrsn=45991f2f_1). ## Transportation Data The data set contains a demographic and socioeconomic composition of 6,254 people from 3,285 households in the Puget Sound regional area, as well as detailed information on the travel behavior of each household for a designated 24-hour period. The survey logged over 508 thousand vehicle miles of travel by participants during 52,492 trips. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2017 Puget Sound Regional Travel Study

# 2017 Puget Sound Regional Travel Study The 2017 Puget Sound Regional Travel Study collected household- and person-level activity and travel pattern information from residents throughout the Puget Sound Regional Council's four-county region in Washington State. It followed the [2014-2015 Puget Sound Regional Travel Study](https://www.nrel.gov/transportation/secure-transportation-data/tsdc-puget-sound-travel-study), starting a planned six-year data collection that includes 2019 and 2021. The multiyear program's goal is to maintain an updated source of household travel behavior data that: - Supports modeling and planning needs - Facilitates trend analysis over time - Allows for regular study design updates to integrate evolving data collection methods and emerging travel behaviors and transportation issues. ## Data Collection Agency The Puget Sound Regional Council conducted the study. ## Methodology The 2017 study featured both the design and administration of a one-day household travel diary (approximately 80% of households before data cleaning) and a seven-day smartphone global positioning system (GPS) diary (approximately 20% of households before data cleaning). It combined data collection methods, including smartphone, online, and telephone. The survey design included several stages to recruit and collect data about households, their members, and their travel behaviors during the assigned travel period. ## Survey Records Survey records include a total of 6,254 participants. ## More Information For more information, see the [survey documentation](https://www.nrel.gov/media/docs/libraries/tsdc/zip/tsdc-2017-puget-sound-travel-study-documentation.zip?sfvrsn=45991f2f_1). ## Transportation Data The data set contains a demographic and socioeconomic composition of 6,254 people from 3,285 households in the Puget Sound regional area, as well as detailed information on the travel behavior of each household for a designated 24-hour period. The survey logged over 508 thousand vehicle miles of travel by participants during 52,492 trips. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗