Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Enhanced Lithium-ion intercalation properties of coherent hydrous vanadium pentoxide-carbon cryogels nanocomposites

Coherent hydrous vanadium pentoxide (V2O5•nH2O) - carbon cryogels (CCs) nanocomposites were synthesized by electrodeposition of vanadium pentoxide onto the porous carbon scaffold which was derived from resorcinol (R) and formaldehyde (F) organic hydrogels. As-fabricated nanocomposites were characterized by scanning electron microscopy (SEM), along with EDAX and nitrogen sorption isotherms which suggested vanadium pentoxide incorporated in the pores of carbon cryogels. The nanocomposites showed much improved discharge capacity and better cyclic stability as compared to hydrous vanadium pentoxide films deposited on platinum foil. The discharge capacity of the nanocomposites reached 280 mAh/g based on the mass of the vandium pentoxide at a current density of 100mA/g and it possessed good cycle stability at different discharge rate. The results demonstrated that electrochemical performances, such as specific discharge capacitance and reversibility of the composite electrode, could be greatly enhanced by the introduction of carbon cryogels (CCs) scaffold with three-dimensionally interconnected porous structure in which V2O5•nH2O homogeneously dispersed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative Measurement of Integrated Band Intensities of Benzene Vapor in the Mid-Infrared at 278, 298, and 323 K

Pressure broadened (1 atm. N2) laboratory spectra of benzene vapor (in natural abundance) were recorded at 278, 298, and 323 K, covering 600-6500 cm-1. The spectra were recorded at a resolution of 0.112 cm-1 using a commercial Fourier transform spectrometer. The pressure of each benzene vapor sample was measured using high precision capacitance manometers and a minimum of nine sample pressures were recorded for each temperature. The samples were introduced into a temperature-stabilized static cell (19.94(1) cm pathlength) that was hard-mounted into the spectrometer. From these data a fit composite spectrum was calculated for each temperature. The number density for the three composite spectra was normalized to 296 K. The spectra give the absorption cross section (cm2 molecule-1, naperian units) as a function of wavenumber. From these spectra integrated band intensities (cm molecule-1 and atm-1 cm-2) for intervals corresponding to the stronger benzene bands were calculated and are compared with previously reported values. We discuss and quantify error sources and estimate our systematic (NIST Type-B) errors to be 3% for the stronger bands. The measured absorption coefficients and integrated band intensities are useful for remote sensing applications such as measurements of planetary atmospheres and assessment of the environmental impact of terrestrial oil fire emissions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Novel Co{sub 3}O{sub 4} porous polyhedrons derived from metal–organic framework toward high performance for electrochemical energy devices

Co{sub 3}O{sub 4} polyhedrons with porous structure have been synthesized simply by annealing Prussian blue analogue (PBA) Co{sub 3}[Co(CN){sub 6}]{sub 2} polyhedrons at 400 °C in air. The product was characterized by a series of techniques, such as X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Transmission Electron Microscopy (TEM), High-resolution TEM (HRTEM), X-ray Photoelectron Spectroscopy (XPS), and Brunauer–Emmett–Teller (BET) gas adsorption. Interestingly, when evaluated as an anode material for lithium-ion batteries (LIBs), the Co{sub 3}O{sub 4} porous polyhedrons manifested high reversible capacity (about 1200 mAh g{sup −1} at 50 mA g{sup −1}) and excellent cycling performance. Moreover, they also exhibited a high specific capacitance of 110 Fg{sup −1} when used as an electrode in the supercapacitor. It is suggested that the special morphology and porous nanostructure lead to the promising electrochemical properties. - Graphical abstract: Novel and complicated mesoporous architectures of Co{sub 3}O{sub 4} have been fabricated by thermal decomposition of Prussian Blue Analog (PBA) Co{sub 3}[Co(CN){sub 6}]{sub 2} polyhedrons which obtained at the room temperature. When Co{sub 3}O{sub 4} product was evaluated for Li-ion batteries (LIBs), they exhibited high reversible capacity of 1000 mAh g{sup −1} with excellent cycle life because of the hollow/porous structure. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluate humidity sensing properties of novel TiO{sub 2}–WO{sub 3} composite material

Graphical abstract: TiO{sub 2}–WO{sub 3} (1:1) showed better humidity sensing properties than others within the range of 12–90% relative humidity (RH), the response and recovery time were about 20 s and 160 s, respectively. Compared to the previous studies, the prepared sensor exhibits higher sensitivity (S = 451) and the low hysteresis value was around 0.13% at 32% RH. - Highlights: • Novel TiO{sub 2}–WO{sub 3} composite material was prepared for humidity sensor. • The sensor exhibits higher sensitivity (S = 451). • Low hysteresis value was around 0.13% at 32% RH. - Abstract: A novel TiO{sub 2}–WO{sub 3} composite material was prepared using a different proportion of TiO{sub 2} and WO{sub 3} to that investigated in previous studies. The obtained mesoporous material was characterized using X-ray diffraction, Fourier transform infrared spectrometry, transmission electron microscopy, energy dispersive X-ray spectroscopy, and N{sub 2} adsorption-desorption techniques. The humidity-sensing properties were measured using an inductance, capacitance and resistance analyzer. The results demonstrated that the TiO{sub 2}–WO{sub 3} sample with a ratio of 1:1 showed better humidity sensing properties. Compared to previous studies, the prepared sensor exhibited higher sensitivity (S = 451) and the lower hysteresis value was around 0.13% at 32% RH. Complex impedance analysis indicated that the enhanced humidity sensitivity was probably due to spherical Brunauer–Emmett–Teller surface area and the hetero-junction between TiO{sub 2}–WO{sub 3} thin films, while the impedance varied about three orders of magnitude. Our results demonstrated the potential application of TiO{sub 2}–WO{sub 3} composite for fabricating high performance humidity sensors.

36 MATERIALS SCIENCE↗

Electrodeposited manganese dioxide nanostructures on electro-etched carbon fibers: High performance materials for supercapacitor applications

Highlights: • We report a facile method for fabrication of MnO{sub 2} nanostructures on electro-etched carbon fiber. • MnO{sub 2}-ECF electrode shows outstanding supercapacitive behavior even at high discharge rates. • Exceptional cycle stability was achieved for MnO{sub 2}-ECF electrode. • The coulombic efficiency of MnO{sub 2}-ECF electrode is nearly 100%. - Abstract: In this article we introduce a facile, low cost and additive/template free method to fabricate high-rate electrochemical capacitors. Manganese oxide nanostructures were electrodeposited on electro-etched carbon fiber substrate by applying a constant anodic current. Nanostructured MnO{sub 2} on electro-etched carbon fiber was characterized by scanning electron microscopy, X-ray diffraction and energy dispersive X-ray analysis. The electrochemical behavior of MnO{sub 2} electro-etched carbon fiber electrode was investigated by electrochemical techniques including cyclic voltammetry, galvanostatic charge/discharge, and electrochemical impedance spectroscopy. A maximum specific capacitance of 728.5 F g{sup −1} was achieved at a scan rate of 5 mV s{sup −1} for MnO{sub 2} electro-etched carbon fiber electrode. Also, this electrode showed exceptional cycle stability, suggesting that it can be considered as a good candidate for supercapacitor electrodes.

36 MATERIALS SCIENCE↗

Electrodeposited porous metal oxide films with interconnected nanoparticles applied as anode of lithium ion battery

Highlights: • Highly porous NiO film is prepared by a co-electrodeposition method. • Porous NiO film is composed of interconnected nanoparticles. • Porous structure is favorable for fast ion/electron transfer. • Porous NiO film shows good lithium ion storage properties. - Abstract: Controllable synthesis of porous metal oxide films is highly desirable for high-performance electrochemical devices. In this work, a highly porous NiO film composed of interconnected nanoparticles is prepared by a simple co-electrodeposition method. The nanoparticles in the NiO film have a size ranging from 30 to 100 nm and construct large-quantity pores of 20–120 nm. As an anode material for lithium ion batteries, the highly porous NiO film electrode delivers a high discharge capacity of 700 mA h g{sup −1} at 0.2 C, as well as good high-rate performance. After 100 cycles at 0.2 C, a specific capacitance of 517 mA h g{sup −1} is attained. The good electrochemical performance is attributed to the interconnected porous structure, which facilitates the diffusion of ion and electron, and provides large reaction surface area leading to improved performance.

36 MATERIALS SCIENCE↗

The effect of annealing temperature on the electrical characterization of Co/n type GaP Schottky diode

The Co/n-GaP nano-Schottky diodes have been fabricated to investigate effect of annealing temperature on the characteristics of the device. DC Magnetron sputtering technique has been used for Co metallic contact. The samples have been annealed for three minutes at 400 °C and 600 °C. XRD analyzes of the devices subjected to thermal annealing process have been investigated. Surface images have been taken with atomic force microscopy (AFM) in order to examine the morphology of the surface of the metal layer before and after the annealing the sample. The current–voltage (I–V) measurements taken at room temperature have shown that the ideality factor and series resistance decrease with the increasing annealing temperature. The ideality factor was found to be 1.02 for sample annealed at 400 °C. Before and after annealing, depending on the temperature measurement, the capacitance–frequency (C–f), and conductance–frequency (G–f) have been measured, and graphs have been plotted.

36 MATERIALS SCIENCE↗

Enhanced electrochemical performances of PANI using redox additive of K{sub 4}[Fe(CN){sub 6}] in aqueous electrolyte for symmetric supercapacitors

Highlights: • Effect of K{sub 4}[Fe(CN){sub 6}] in H{sub 2}SO{sub 4} studied on the electrochemical properties of PANI. • The polaron band – π* transition reveals the emeraldine salt (conductive) form. • CV curves exhibit quasi-reversible redox behavior. • Symmetric PANI SC shows 228 F g{sup −1} at 1 mA cm{sup −2} in K{sub 4}[Fe (CN){sub 6}] added 1 M H{sub 2}SO{sub 4}. • PANI-1 symmetric supercapacitor shows almost 100% of capacity retention. - Abstract: Polyaniline (PANI) particles were prepared by reflux assisted chemical oxidative polymerization method with the aid of ammonium per sulfate/ferric chloride as oxidants and HCl/H{sub 2}SO{sub 4} as the medium. Amorphous nature and the emeraldine state of PANI were revealed from X-ray diffraction and Fourier transform infrared analysis. Moreover, ultra violet–visible spectra attributes to the polaron band – π* transition of polyaniline. The scanning electron microscopic image shows that the particle size is in the range of 0.2–2 μm. The electrochemical performances of the material were investigated in 1 M H{sub 2}SO{sub 4} and 0.08 M K{sub 4}[Fe(CN){sub 6}] added 1 M H{sub 2}SO{sub 4} aqueous electrolytes. Cyclic voltammetry and galvanostatic charge–discharge studies were carried out to find its suitability as a supercapacitor electrode material. The charge discharge analysis of the fabricated symmetric supercapacitors revealed the fact that the electrolyte containing redox additive (0.08 M K{sub 4}[Fe(CN){sub 6}]) delivered an enhanced specific capacitance of 228 F g{sup −1} (∼912 F g{sup −1} for single electrode) than that of 1 M H{sub 2}SO{sub 4} (100 F g{sup −1}) at 1 mA cm{sup −2}. Further cycling stability is performed at 5 mA cm{sup −2} ensures the durability of the supercapacitor.

36 MATERIALS SCIENCE↗

Electro-catalytic activity of Ni–Co-based catalysts for oxygen evolution reaction

Graphical abstract: The electro-catalytic activity of different electro-catalysts with a porous electrode structure was compared considering the real electrode area that was evaluated by cyclic measurement. - Highlights: • Ni–Co-based electro-catalysts for OER have been studied and compared. • The real electrode area is calculated and used for assessing the electro-catalysts. • Exchange current and reaction rate constant are estimated. • Ni is more useful for OER reaction than Co. - Abstract: In the present work, Ni–Co-based electrocatalysts (Ni/Co = 0:6, 1:5, 2:4, 3:3, 4:2, 5:1 and 6:0) have been studied for oxygen evolution reaction. The phase structure has been analyzed by X-ray diffraction technique. Based on the XRD and SEM results, it is believed that the synthesized products are poorly crystallized. To exclude the disturbance of electrode preparation technology on the evaluation of electro-catalytic activity, the real electrode surface area is calculated based on the cyclic voltammetry data, assumed that the specific surface capacitance is 60 μF cm{sup −2} for metal oxide electrode. The real electrode area data are used to calculate the current density. The reaction rate constant of OER at different electrodes is also estimated based on basic reaction kinetic equations. It is found that the exchange current is 0.05–0.47 mA cm{sup −2} (the real surface area), and the reaction rate constant has an order of magnitude of 10{sup −7}–10{sup −6} cm s{sup −1}. The influence of the electrode potential on OER rate has been also studied by electrochemical impedance spectroscopy (EIS) technique. Our investigation has shown that the nickel element has more contribution than the cobalt; the nickel oxide has the best electro-catalytic activity toward OER.

36 MATERIALS SCIENCE↗

Trap assisted space charge conduction in p-NiO/n-ZnO heterojunction diode

Highlights: • p-NiO/n-ZnO heterojunction diode with enhanced junction parameters has been prepared. • Temperature dependent I–V throw insight into the involved conduction mechanism. • SCLC with exponential trap distribution was found to be the dominant mechanism. • C–V measurement at different frequencies support the presence of traps. - Abstract: The development of short-wavelength p–n junction is essentially important for the realization of transparent electronics for next-generation optoelectronic devices. In the present work, a p–n heterojunction diode based on p-NiO/n-ZnO has been prepared under the optimised growth conditions exhibiting improved electrical and junction parameters. The fabricated heterojunction gives typical current–voltage (I–V) characteristics with good rectifying behaviour (rectification ratio ≈ 10{sup 4} at 2 V). The temperature dependent current–voltage characteristics of heterojunction diode have been studied and origin of conduction mechanism is identified. The space-charge limited conduction with exponential trap distribution having deep level trap is found to be the dominant conduction mechanism in the fabricated p–n heterojunction diode. The conduction and valence band discontinuities for NiO/ZnO heterostructure have been determined from the capacitance–voltage (C–V) measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low operating voltage n-channel organic field effect transistors using lithium fluoride/PMMA bilayer gate dielectric

Highlights: • Alternative to chemically crosslinking of PMMA to achieve low leakage in provided. • Effect of LiF in reducing gate leakage through the OFET device is studied. • Effect of gate leakage on transistor performance has been investigated. • Low voltage operable and low temperature processed n-channel OFETs were fabricated. - Abstract: We report low temperature processed, low voltage operable n-channel organic field effect transistors (OFETs) using N,N′-Dioctyl-3,4,9,10-perylenedicarboximide (PTCDI-C{sub 8}) organic semiconductor and poly(methylmethacrylate) (PMMA)/lithium fluoride (LiF) bilayer gate dielectric. We have studied the role of LiF buffer dielectric in effectively reducing the gate leakage through the device and thus obtaining superior performance in contrast to the single layer PMMA dielectric devices. The bilayer OFET devices had a low threshold voltage (V{sub t}) of the order of 5.3 V. The typical values of saturation electron mobility (μ{sub s}), on/off ratio and inverse sub-threshold slope (S) for the range of devices made were estimated to be 2.8 × 10{sup −3} cm{sup 2}/V s, 385, and 3.8 V/decade respectively. Our work thus provides a potential substitution for much complicated process of chemically crosslinking PMMA to achieve low leakage, high capacitance, and thus low operating voltage OFETs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Deposition temperature dependent optical and electrical properties of ALD HfO{sub 2} gate dielectrics pretreated with tetrakisethylmethylamino hafnium

Highlights: • ALD-derived HfO{sub 2} gate dielectrics have been deposited on Si substrates. • The leakage current mechanism for different deposition temperature was discussed. • Different emission at different field region has been determined precisely. - Abstract: The effect of deposition temperature on the growth rate, band gap energy and electrical properties of HfO{sub 2} thin film deposited by atomic layer deposition (ALD) has been investigated. By means of characterization of spectroscopy ellipsometry and ultraviolet–visible spectroscopy, the growth rate and optical constant of ALD-derived HfO{sub 2} gate dielectrics are determined precisely. The deposition temperature dependent electrical properties of HfO{sub 2} films were determined by capacitance–voltage (C–V) and leakage current density–voltage (J–V) measurements. The leakage current mechanism for different deposition temperature has been discussed systematically. As a result, the optimized deposition temperature has been obtained to achieve HfO{sub 2} thin film with high quality.

36 MATERIALS SCIENCE↗

Origin of giant dielectric constant and conductivity behavior in Zn{sub 1−x}Mg{sub x}O (0 ≤ x ≤ 0.1) ceramics

Highlights: • Mg doped zinc oxide ceramics were fabricated by co-precipitation/solid state reaction. • MZO ceramics shown a Debye type and colossal dielectric response. • Physical absorption of atmospheric water vapor contributes these high permittivity. • The fabricated ceramic shows Maxwell–Wagner type of relaxation. - Abstract: Zn{sub 1−x}Mg{sub x}O ( ≤ x ≤ 0.1) ceramics were fabricated by conventional solid-state reaction of co-precipitated zinc oxide and magnesium hydroxide nanoparticles. Structural and morphological properties of the fabricated ceramics were studied using X-ray diffraction and scanning electron microscopic analysis. The dielectric measurements of the ceramics were carried out as a function of frequency and temperature respectively. Interestingly, Mg doped ZnO (MZO) samples exhibited colossal dielectric response (∼1 × 10{sup 4} at 1 kHz) with Debye like relaxation. The detailed dielectric studies and thermal analyses showed that the unusual dielectric response of the samples were originated from the defected grain and grain boundary (GB) conductivity relaxations due to the absorbed atmospheric water vapor (moisture). Impedance spectroscopy was employed to determine the defected grain and GB resistances, capacitances and which supported Maxwell–Wagner type relaxation phenomena.

36 MATERIALS SCIENCE↗

Characterization of electronic structures from CdS/Si nanoheterostructure array based on silicon nanoporous pillar array

Highlights: • CdS/Si nanoheterostructure array has been fabricated through a CBD method. • The electronic properties have been investigated by the I–V and C–V techniques. • The onset voltages, characteristic frequency and built-in potential are investigated. • The electronic structures can be tuned through the annealing treatments. - Abstract: The electronic properties of heterostructures are very important to its applications in the field of optoelectronic devices. Understanding and control of electronic properties are very necessary. CdS/Si nanoheterostructure array have been fabricated through growing CdS nanocrystals on the silicon nanoporous pillar array using a chemical bath deposition method. The electronic properties of CdS nanoheterostructure array have been investigated by the current–voltage, complex impedance spectroscopy and capacitance–voltage techniques. The onset voltages, characteristic frequency and built-in potential are gradually increased with increasing the annealing temperature. It is indicated that the electronic structures of CdS/Si nanoheterostructure array can be tuned through the annealing treatments.

36 MATERIALS SCIENCE↗

From graphite-clay composites to graphene electrode materials: In-situ electrochemical oxidation and functionalization

Highlights: • Graphene was synthesized by electrochemical exfoliation of graphite-clay rods with different clay:graphite ratios. • In-situ electrochemical oxidation and functionalization were used in the exfoliated process. • Graphene thin-film electrodes were constructed for supercapacitors and lithium ion batteries. • This work provided a value-added way that can transform the low-purity graphite resources to graphene electrode materials. - Abstract: The development of cost- and time-effective methods to synthesize graphene materials is very urgent in order to promote its large-scale application in electrochemical energy storage devices. Herein, graphene materials were synthesized by the electrochemical exfoliation (electrochemical oxidation) of graphite-clay rods with different clay:graphite ratios in aqueous solution and in short reaction time (1 h). The dual role of electrochemical oxidation reaction was presented: (1) the electrochemical oxidation reaction facilitates the exfoliation of pencil graphite leads and in-situ forms functional groups on graphene; (2) the electrochemical oxidation reaction enhances the Faradaic reaction in supercapacitor. The in-situ electrochemical oxidation and functionalization methods can transform low purity graphite to high-value graphene electrode materials for supercapacitors and lithium ion batteries. The specific capacitances of exfoliated graphene are 20-time larger than that of graphite-clay composites. This work provided a value-added way that can transform the low-purity graphite resources to high performance graphene electrode materials.

36 MATERIALS SCIENCE↗

Surfactant-free synthesis, photocatalytic and electrochemical property study of Co3O4 nanoparticles

Highlights: • Surfactant-free Co{sub 3}O{sub 4} nanoparticles were synthesized in aqueous solution. • The size of Co{sub 3}O{sub 4} nanoparticles can be controlled by changing the NaOH concentration. • The Co{sub 3}O{sub 4} nanoparticles size bears a linear relationship to the NaOH concentration. • The photocatalytic and electrochemical properties of Co{sub 3}O{sub 4} nanoparticles are size dependent. - Abstract: A facile surfactant-free route for size-control preparation of Co{sub 3}O{sub 4} nanoparticles in aqueous solution was reported. The feeding ratio of OH{sup −} to Co{sup 2+} influences the conversion of Co{sup 2+} to Co{sub 3}O{sub 4} crystals, and affects the crystallinity of the final Co{sub 3}O{sub 4} products. The size of Co{sub 3}O{sub 4} nanoparticles can be controlled to be 15, 18, 27 and 30 nm by simply regulating the concentration of NaOH solution through a β-Co(OH){sub 2} → Co{sub 3}O{sub 4} process. A linear relationship between Co{sub 3}O{sub 4} size and NaOH concentration was found. The photocatalytic property for rhodamine B (RhB) degradation and electrochemical property for supercapacitor of the Co{sub 3}O{sub 4} nanoparticles are size dependent. Co{sub 3}O{sub 4} nanoparticles in the size of 15 nm showed the highest photocatalytic efficiency of 70% in pH 3 under visible-light irradiation for 3 h, and behaved the highest specific capacitance of 177 F g{sup −1}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Origin of relaxor behavior in 0.78(Na0.5Bi0.5)TiO3-0.2SrTiO3-0.02BaTiO3 ceramic: An electrical modulus study

Highlights: • Implementation of IS technique to study thermal evolution of polar nano regions. • Indirect evidence of the existence of polar nano regions well above T{sub B} and below T{sub f}. • Visualization of relaxation dynamics of PNRs on cooling by a schematic diagram. - Abstract: The relaxation dynamics of the polar nano-regions (PNRs) in the 0.78Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}-0.2SrTiO{sub 3}-0.02BaTiO{sub 3} lead free ternary system over a wide temperature range (50–650 °C) is investigated using complex electric modulus formalism. The modulus spectra are analyzed across three characteristic temperatures T{sub B}, T{sub m}, and T{sub f} with a special focus on the evolution of dynamics of PNRs. Portraying high capacitance of shoulder response as compared to the bulk response in M{sup (}f) spectra shows indirectly the presence of highly polarisable entities that persist even above T{sub B} and below T{sub f}. The activation energies extracted from an Arrhenius fit to the relaxation time of both bulk and shoulder response signify different relaxation mechanisms. Further, the value of the stretched exponent β and the scaling behavior study of the M{sup (}f) spectra envisage temperature sensitive dipolar relaxation.

36 MATERIALS SCIENCE↗

Solvent free solid-state synthesis of Pr6O11/g-C3N4 visible light active photocatalyst for degradation of AV7 dye

Highlights: • A new combination of Pr{sub 6}O{sub 11}/g-C{sub 3}N{sub 4} photocatalyst is synthesized by simple solvent free solid state method. • The photocatalytic activity of Pr{sub 6}O{sub 11}/g-C{sub 3}N{sub 4} is investigated by degradation of AV7 dye under visible light. • Improved performance is attributed to enhanced visible light absorption and efficient charge separation as evidenced by photoelectrochemical study. • Pr{sub 6}O{sub 11}/g-C{sub 3}N{sub 4} also exhibit super capacitance behavior. - Abstract: A new Pr{sub 6}O{sub 11}/g-C{sub 3}N{sub 4} heterostructure material has been prepared by single step solvent free solid state method for photocatalytic environmental cleaning application using visible light. The Pr{sub 6}O{sub 11}/g-C{sub 3}N{sub 4} heterostructure exhibits enhanced visible light absorption, resulting in improved photoelectrochemical properties and photocatalytic performance. The optimized composition of Pr{sub 6}O{sub 11}/g-C{sub 3}N{sub 4} composite shows improved degradation kinetics and completely degrades AV7 dye within 20 min of visible light irradiation. Photoluminescence and electrochemical studies suggest better separation of photogenerated charge carriers in the composite compared to single phase materials. This is further substantiated by the improved photocurrent response of the composite. The notable increase of photocatalytic activity of Pr{sub 6}O{sub 11}/g-C{sub 3}N{sub 4} heterostructure is ascribed to the improved visible light absorption, reduced band gap and better separation of photogenerated electrons and holes. To the best of our knowledge, this new heterostructure photocatalyst is found to be more efficient for the degradation of AV7 dye compared to the systems reported so far.

36 MATERIALS SCIENCE↗