Search NASA⌕ Search

SEARCH · Search NASA

Results for “Carbides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Density functional study on the mechanism for the highly active palladium monolayer supported on titanium carbide for the oxygen reduction reaction

The adsorption, diffusion, and dissociation of O{sub 2} on the palladium monolayer supported on TiC(001) surface, MLPd/TiC(001), are investigated using ab initio density functional theory calculations. Strong adhesion of palladium monolayer to the TiC(001) support, accompanied by a modification of electronic structure of the supported palladium, is evidenced. Compared with Pt(111) surface, the MLPd/TiC(001) can enhance the adsorption of O{sub 2}, leading to comparable dissociation barrier and a smaller diffusion barrier of O{sub 2}. Whilst the adsorption strength of atomic O (the dissociation product of O{sub 2}) on MLPd/TiC(001) is similar to that on the Pt(111) surface, possessing high mobility, our theoretical results indicate that MLPd/TiC(001) may serve as a good catalyst for the oxygen reduction reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Band structure of germanium carbides for direct bandgap silicon photonics

Compact optical interconnects require efficient lasers and modulators compatible with silicon. Ab initio modeling of Ge{sub 1−x}C{sub x} (x = 0.78%) using density functional theory with HSE06 hybrid functionals predicts a splitting of the conduction band at Γ and a strongly direct bandgap, consistent with band anticrossing. Photoreflectance of Ge{sub 0.998}C{sub 0.002} shows a bandgap reduction supporting these results. Growth of Ge{sub 0.998}C{sub 0.002} using tetrakis(germyl)methane as the C source shows no signs of C-C bonds, C clusters, or extended defects, suggesting highly substitutional incorporation of C. Optical gain and modulation are predicted to rival III–V materials due to a larger electron population in the direct valley, reduced intervalley scattering, suppressed Auger recombination, and increased overlap integral for a stronger fundamental optical transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sputter-deposited low-stress boron carbide films

Significant challenges have been faced in the manufacturing of low-stress B 4 C films. Here, we demonstrate a set of process parameters for direct-current magnetron sputter deposition of smooth, high-purity, amorphous B 4 C films with near-zero total residual stress and with thicknesses up to 10 μm. Films are characterized by a combination of high-energy ion scattering, x-ray diffraction, electron microscopy, and stress measurements based on substrate curvature. In order to facilitate the process transfer to other sputtering geometries, the favorable deposition conditions are correlated with distributions of landing energies and incident angles of depositing species estimated by Monte Carlo simulations of ballistic collisions and gas phase atomic transport. Based on such simulations, a decrease in compressive stress with increasing Ar working gas pressure is attributed to the corresponding broadening of the angular distribution of depositing species and associated atomic shadowing effects.

36 MATERIALS SCIENCE↗

Directional amorphization of boron carbide subjected to laser shock compression

When crystalline solids are stressed quasi-statically, dislocation slip, twinning, and phase transformations are the predominant mechanisms to dissipate the imparted elastic energy. Under shock, high hydrostatic and shear stresses promptly build up at the shock front, favoring fast energy dissipation mechanisms. Amorphization, which may only involve localized atomic arrangements, is therefore an additional potential candidate. Shock-induced amorphization has now been reported in various materials and hence should be incorporated as a deformation/damage mechanism of crystals subjected to high-strain-rate loading.

36 MATERIALS SCIENCE↗

Ab initio study of palladium and silicon carbide

Ab initio methods have been used to investigate the properties of Pd as impurity in bulk SiC at five charge states within the framework of density functional theory using the local density spin approximation. Pd interstitials and substitutionals have similar energy to their intrinsic counterparts. In addition, Pd substitutes for a vacancy, di-vacancy, and tri-vacancy with similar energies. Pd will also diffuse through SiC via an interstitial mechanism employing the tetrahedral sites and Pd can substitute for Si and C at positive charge states. Removing electrons (p-type doping) from SiC lowers the formation and migration energies of Pd defects in SiC for most configurations.

36 MATERIALS SCIENCE↗

P-V-T equation of state of boron carbide

We report the P-V-T equation of state measurements of B 4 C to 50 GPa and approximately 2500 K in laser-heated diamond anvil cells. We obtain an ambient temperature, third-order Birch–Murnaghan fit to the P-V data that yields a bulk modulus K 0 of 221(2) GPa and derivative, (dK/dP) 0 of 3.3(1). These were used in fits with both a Mie–Grüneisen–Debye model and a temperature-dependent, Birch–Murnaghan equation of state that includes thermal pressure estimated by thermal expansion (α) and a temperature-dependent bulk modulus (dK 0 /dT). The ambient pressure thermal expansion coefficient (α 0 + α 1 T), Grüneisen γ(V) = γ 0 (V/V 0 ) q and volume-dependent Debye temperature, were used as input parameters for these fits and found to be sufficient to describe the data in the whole P-T range of this study.

36 MATERIALS SCIENCE↗

Equation of state of boron carbide B 4 ⁢C

We present the results of recent experiments conducted on the Sandia Z machine and a new tabular equation of state for B 4 ⁢C. The equation of state was calibrated to a combination of density functional calculations reported here and fits to preexisting data. It was constructed partly to recover the effects of a shock-driven, polymorphic phase transition of unknown character beginning at particle velocities of just under 3 km/s (shock pressures of 95 GPa). Some of the Z experiments included sound speeds determined by the overtaking rarefaction method, from which we calculate the Grüneisen parameter and compare with previous experiments conducted at the OMEGA laser [Fratanduono et al ., Phys. Rev. B 94 , 184107 (2016)], our own first principles calculations, and another recent tabular equation of state [Zhang et al ., Phys. Rev. E 102 , 053203 (2020)]. We also compare our results with previous static compression, thermophysical, and melt studies, finding mixed consistency. We predict the onset and completion of shock melting at 225 and 265 GPa, respectively, and predict a melt curve that is largely flat to pressures of several hundred GPa.

36 MATERIALS SCIENCE↗

Ab initio study of the adsorption, migration, clustering, and reaction of palladium on the surface of silicon carbide

This work presents first principle calculations to understand the adsorption, clustering, migration, and reaction of Pd on three different surfaces of 3C-SiC ({l_brace}111{r_brace}, {l_brace}100{r_brace} C-terminated, and {l_brace}100{r_brace} Si-terminated). The surfaces were chosen based upon experimental and theoretical work. Pd preferably binds to Si-terminated surfaces and has higher migration energies on these surfaces. Pd has low migration energies on non-Si-terminated surfaces facilitating the creation of Pd clusters. About 0.5 eV is gained per Pd atom added to a cluster. Reaction mechanisms are reported for Pd reacting on {l_brace}100{r_brace} surfaces. On the {l_brace}100{r_brace} C-terminated surfaces, a single Pd atom can substitute for a C with an energy barrier of 0.48 eV and two Pd atoms can substitute for two C atoms with an energy barrier of 0.04 eV. In both cases, the Pd atoms form Pd-C-C bridges between Si lattice sites. For the {l_brace}100{r_brace} Si-terminated surface, a single Pd atom can substitute for a Si atom with an energy barrier is 1.53 eV. No comparable low energy pathways were found on the {l_brace}111{r_brace} surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temporal and spatial evolution of Si atoms in plasmas produced by a nanosecond laser ablating silicon carbide crystals

Optical emission spectroscopy (OES) was used to study the evolution behavior of the neutral Si atoms in the plasma produced by nanosecond pulsed-laser beam irradiating on SiC crystal targets. The OES measurements indicated that the electron temperature and density in the plasma had maximum values around a region about 2mm from the target surface. Based on the temporal and spatial evolution of the spectral line at 633.19 nm originating from excited Si atoms, it was found that these Si atoms have short decay times and long range spatial distribution in vacuum. At the initial growth stage of SiC thin films using pulsed-laser deposition (PLD) technique, these Si atoms were found possibly to arrive at the Si substrate to form defects near the SiC/Si interface. By comparing the OES result measured in vacuum and that measured in ambient air, it was deduced that by properly adjusting the background gas species and pressure, the quality of the films prepared by PLD technique may be improved.

36 MATERIALS SCIENCE↗

Silicon Carbide Inverter for Off-Road Heavy-Duty Applications: The Importance of Thermal and Thermomechanical Design in Power Electronics Packaging

Electrification of drivetrain systems is now seen as a major opportunity by the transportation industry across the globe to reduce the greenhouse gas emissions and revolutionize the travel patterns of millions of people. The cumulative number of plug-in hybrid and battery electric vehicles (EVs) sold in the United States has now surpassed 2 million in 2021, according to the International Energy Agency. The introduction of EVs in different classes of passenger vehicles and the continued drop in prices spurred by government incentives have attracted the attention of consumers despite certain barriers, such as higher initial cost and range anxiety. In the United States, the EV market share is now growing at an exponential pace, with the domestic automakers allocating a lion's share of new and future car sales to EVs. Additionally, different market studies project decreasing cost and rising sales of medium- and heavy-duty electric trucks. Although electrification initiatives are strongly pursued in the on-road passenger vehicle market, off-highway sectors, such as construction, mining, and agriculture, are also gradually implementing electric drivetrain technologies in their machineries. As EVs grow in popularity on a global scale, innovative drivetrain technologies must meet the increasing energy demand by significantly increasing system efficiency.

ADVANCED PROPULSION SYSTEMS↗

Using Hertzian Indentation to Understand the Strength and Ballistic Resistance of Silicon Carbide

This article presents an initial evaluation of the usefulness of spherical or Hertzian indentation for the determination and/or validation of constitutive models and for a potential link to ballistic resistance (interface defeat). Recent advancements in producing more confident elevated stress levels in Hertzian indentation make the usefulness of this test much more feasible. There are very few experimental techniques that can produce the high stresses, strains, and pressures produced in Hertzian indentation tests. Additionally, they are also relatively simple, repeatable, timely, and inexpensive. There is still the disadvantage that the stresses, strains, and pressures are not explicit outputs of the experiments requiring the constitutive response to be inferred by performing computations and comparing the computed force-deflection results to the experiment. Preliminary results indicate that Hertzian indentation can be used to help define the constitutive response but it is still uncertain if it can be used to rank a ceramic's ability to produce interface defeat.

36 MATERIALS SCIENCE↗

Ta–Zr carbides: Synthesis advances via carbothermal reduction and defect evolution observed through transmission electron microscopy ion irradiation

The thermodynamic stability of six distinct compositions within the Zr—Ta—C ternary system is investigated in this study, marking the first report of their synthesis through carbothermic reduction in vacuum. A prolonged annealing process at 2200°C enabled high densification and phase equilibrium. Detailed phase identification and microstructural characterization through microscopy and X-ray diffraction techniques revealed clear compositional trends and stable phase formations. Two compositions ((Ta 0.2 Zr 0.8 )C 0.6 and (Ta 0.5 Zr 0.5 )C 1 ) were selected for ion irradiation experiments using 200 keV Kr + at 600°C—representing the first-ever irradiation study on the Zr—Ta—C system. The findings indicated defect accumulation and nanoscale cavity formation without any evidence of amorphization, highlighting the system's structural stability under irradiation. Together, the synthesis and irradiation results provide a basis for further investigation of the system and suggest its relevance for applications under extreme environments.

36 MATERIALS SCIENCE↗

Low-temperature production of silicon carbide films of different polytypes

The study is concerned with the effect of temperature on the structure of SiC films formed by deposition of the C and Si ions with the energy 120 eV. On the basis of the X-ray structural studies, it is unambiguously established that the structure of the growing polytype is finely dependent on the substrate temperature. In the temperature range from 1080 deg. C to 1510 deg. C, the sequence of films involving the 21R, 51R, 27R, and 6H polytypes is produced for the first time. The effect of temperature on the silicon-carbon atomic content ratio [Si]/[C] in the deposited films is determined. At optimized parameters of deposition the film structured as the 51R rhombohedral polytype is grown.

36 MATERIALS SCIENCE↗

Simulation of interaction between nickel and silicon carbide during the formation of ohmic contacts

For the first time, the quantitative model of interaction between silicide-forming metal Ni and single-crystalline SiC is developed on the basis of the mutual diffusion of components and the volume silicide-formation reaction. The model makes it possible to describe satisfactorily the basic properties of the redistribution of components during the thermal annealing and during the proton irradiation of the Ni-SiC system at elevated temperatures, specifically: the presence of an extended reaction zone, an excess of the carbon concentration over the silicon concentration at the interface with the SiC substrate, and the carbon accumulation near the surface. It is shown that the stimulation of the interaction between metal Ni and SiC by the proton irradiation at an elevated temperature occurs due to an increase in the metal diffusivity and in the constants of rates of reactions of solid-phase silicide-formation. An acceleration of metal diffusion is associated with the generation of elementary radiation defects (interstitial atoms and vacancies), while an increase in the constants of rates of solid-phase reactions is attributed to a generation of vacancies, which contribute free volume.

36 MATERIALS SCIENCE↗

Mechanisms of defect formation in ingots of 4H silicon carbide polytype

The methods of optical microscopy and X-ray diffractometry have been used to study the features of defect structure in ingots of the SiC-4H polytype; the ingots have featured different diameters and have been grown by the modified Lely method on seeds with deviations of several degrees from the exact orientation (0001)C in the direction Left-Pointing-Angle-Bracket 112-bar0 Right-Pointing-Angle-Bracket (off-cut (0001) seeds). The slip bands observed in the crystals are extended along the [112-bar0] direction and correspond to the secondary slip system of threading dislocations a/3 Left-Pointing-Angle-Bracket 112-bar0 Right-Pointing-Angle-Bracket (1-bar100) for hexagonal close packing (HCP) crystals. Low-angle dislocation boundaries directed along [11-bar00] accommodate the disorientation of neighboring domains, which results from their mutual rotation around the [0001] axis. Enlargement of ingots leads to some increase in the dislocation density, mainly due to threading edge dislocations. The average density of micropipes is in the range of 5-20 cm{sup -2} and practically remains unchanged as the ingot size is increased.

36 MATERIALS SCIENCE↗