Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffuser Flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

An analysis of turbulent diffusion flame in axisymmetric jet

The kinetic theory of turbulent flow was employed to study the mixing limited combustion of hydrogen in axisymmetric jets. The integro-differential equations in two spatial and three velocity coordinates describing the combustion were reduced to a set of hyperbolic partial differential equations in the two spatial coordinates by a binodal approximation. The MacCormick's finite difference method was then employed for solution. The flame length was longer than that predicted by the flame-sheet analysis, and was found to be in general agreement with a recent experimental result. Increase of the turbulence energy and scale resulted in an enhancement of the combustion rate and, hence, in a shorter flame length. Details of the numerical method as well as of the physical findings are discussed.

Chung, P. M.↗

Forced and natural convection in laminar-jet diffusion flames

An experimental investigation was conducted on methane, laminar-jet, diffusion flames with coaxial, forced-air flow to examine flame shapes in zero-gravity and in situations where buoyancy aids (normal-gravity flames) or hinders (inverted-gravity flames) the flow velocities. Fuel nozzles ranged in size from 0.051 to 0.305 cm inside radius, while the coaxial, convergent, air nozzle had a 1.4 cm inside radius at the fuel exit plane. Fuel flows ranged from 1.55 to 10.3 cu cm/sec and air flows from 0 to 597 cu cm/sec. A computer program developed under a previous government contract was used to calculate the characteristic dimensions of normal and zero-gravity flames only. The results include a comparison between the experimental data and the computed axial flame lengths for normal gravity and zero gravity which showed good agreement. Inverted-gravity flame width was correlated with the ratio of fuel nozzle radius to average fuel velocity. Flame extinguishment upon entry into weightlessness was studied, and it was found that relatively low forced-air velocities (approximately 10 cm/sec) are sufficient to sustain methane flame combustion in zero gravity. Flame color is also discussed.

Haggard, J. B., Jr.↗

Plasma rest frame distributions of suprathermal ions in the earth's foreshock region

The paper presents rest frame ion distributions computed from three-dimensional observations of upstream suprathermal ions made by the University of Iowa Quadrispherical Lepedea on ISEE-1. The observations are for a single inbound midmorning pass starting upstream from the ion foreshock and continuing across the quasi-spherical bow shock into the magnetosheath. The crossing of the ion foreshock boundary is marked by a several-minute burst of ions of temperature 100-200 eV moving along the IMF away from the bow shock at 500 km/s relative to the solar wind. The observation of these reflected ions is followed by an extended interval of diffuse ions of temperatures 2-3 keV flowing at about 250 km/s relative to the solar wind and persisting until the bow shock is crossed. Both types of suprathermal ions constitute roughly 2% of the total ion density and carry a parallel heat flux of 0.01 ergs/sq cm-s.

Sentman, D. D.↗

Plasma-gas interactions studies in a hybrid plume plasma rocket

Plasma-gas interaction was investigated and the basic mechanisms for energy and particle transport. The solution approach assumes cylindrical geometry and includes a multiplicity of atomic reactions, and the presence of a strong magnetic field is described. The principal reactions are electron and ion impact ionization, and charge exchange between hot ions and cold neutrals. Radial particle and energy transport is mainly by diffusion. A modified Bohm diffusion model for plasma in the core of the plume, and classical neutral particle diffusion in the cooler regions of the flow are presented. Neutrals are allowed to free stream in the low density regions, where the collision mean-free-path becomes comparable, or even larger than the characteristic dimensions of the system.

Chang, F. R.↗

Numerical modeling of the hybrid plume plasma rocket

This paper reports on ongoing research in the area of numerical simulations of hybrid plume dynamics, and describes the basic mechanisms for energy and particle transport. The solution approach assumes cylindrical geometry and includes a multiplicity of atomic reactions, as well as the presence of a strong magnetic field. The principal reactions are electron impact ionization, and resonant charge exchange between hot ions and cold neutrals. Radial particle and energy transport is mainly by diffusion. The present description includes a modified Bohm diffusion model for plasma in the core of the plume, and classical neutral particle diffusion in the cooler regions of the flow. Neutrals are allowed to 'free stream' in the low density regions, where the collision mean-free-path becomes comparable, or even larger than the characteristic dimensions of the system. A parameteric scan of the various regimes of interest has been completed and the most significant results are presented.

Chang, F. R.↗

The origin of rigidly rotating magnetic field patterns on the sun

Using analytical calculations and numerical simulations, it is shown that a meridional component of magnetic-flux transport will offset the shearing effect of differential rotation and give rise to rigidly rotating patterns of large-scale magnetic field. The nonaxisymmetric field attains a striped polarity pattern which rotates rigidly like a barber pole while its individual small-scale flux elements rotate at the differential rate of the latitudes they are crossing. On the sun, the meridional transport is provided by supergranular diffusion possibly assisted by a small poleward flow. New sources of flux retard this process and exclude the rigid rotation from the sunspot belts until well into the declining phase of the sunspot cycle. This mechanism accounts for a number of heretofore unexplained phenomena including the tendency for coronal holes to rotate rigidly during the declining phase of the sunspot cycle.

Sheeley, N. R., Jr.↗

An analysis for high speed propeller-nacelle aerodynamic performance prediction. Volume 1: Theory and application

A computer program, the Propeller Nacelle Aerodynamic Performance Prediction Analysis (PANPER), was developed for the prediction and analysis of the performance and airflow of propeller-nacelle configurations operating over a forward speed range inclusive of high speed flight typical of recent propfan designs. A propeller lifting line, wake program was combined with a compressible, viscous center body interaction program, originally developed for diffusers, to compute the propeller-nacelle flow field, blade loading distribution, propeller performance, and the nacelle forebody pressure and viscous drag distributions. The computer analysis is applicable to single and coaxial counterrotating propellers. The blade geometries can include spanwise variations in sweep, droop, taper, thickness, and airfoil section type. In the coaxial mode of operation the analysis can treat both equal and unequal blade number and rotational speeds on the propeller disks. The nacelle portion of the analysis can treat both free air and tunnel wall configurations including wall bleed. The analysis was applied to many different sets of flight conditions using selected aerodynamic modeling options. The influence of different propeller nacelle-tunnel wall configurations was studied. Comparisons with available test data for both single and coaxial propeller configurations are presented along with a discussion of the results.

Egolf, T. Alan↗

A highly durable injector faceplate design concept for O2/H2 propellants

Two different O2/H2 injector faceplate designs were used in a test bed rocket engine at the NASA Lewis Research Center facility. This test bed was operated in a pulsing mode to evaluate thrust chamber wall materials and coatings. Degradation of the sintered mesh injector face plates resulted in the substitution of a photoetched diffusion-bonded platelet faceplate. This faceplate accumulated over 4200 thermal cycles without damage or degradation. Prior testing for a total of 17,446 cycles required 19 sintered mesh faceplates. This average of 918 cycles per unit showed the diffusion bonded faceplate to have a thermal cycle capability ranging from 150 to 500 percent of that of the sintered wire unit. The test data also showed that the diffusion-bonded faceplate provided a more uniform flow of gaseous H2 through its discrete and uniformly spaced propellant orifices resulting in enhanced face cooling (no local hot spots) and increased performance. The injector faceplate designs are described and the results of the injector comparison test data are presented.

Mueggenburg, H. H.↗

FTIR Spectroscopic Characterization Of II-VI Semiconductors

Combination of commercial Fourier-transform infrared (FTIR) spectrometer with computer and special-purpose software constitutes highly automated facility for acquisition and processing of infrared transmission or reflection spectral image data. Intended principally to acquire transmission spectra of some compounds of elements in groups II and VI of periodic table. System used to characterize specimens of II/VI alloy semiconductors grown by directional solidification and quenching. Transmission-edge maps helpful in studies of flows, gradients of temperature, and coefficients of diffusion in solidifying melts. Data acquired by system include optical characteristics, and they both verify and complement data obtained by such other techniques as measurements of density and x-ray-dispersion analysis.

Perry, G. L. E.↗

Drop evaporation in a single-axis acoustic levitator

A 20 kHz single-axis acoustic positioner is used to levitate aqueous-solution drops (volumes less than or approximately equal to 100 micro-liters). Drop evaporation rates are measured under ambient, isothermal conditions for different relative humidities. Acoustic convection around the levitated sample enhances the mass loss over that due to natural convection and diffusion. A theoretical treatment of the mass flow is developed in analogy to previous studies of the heat transfer from a sphere in an acoustic field. Predictions of the enhanced mass loss, in the form of Nusselt (Sherwood) numbers, are compared with observed rages of drop shrinking. The work is part of an ESA crystal growth from levitated solution drops.

Lierke, E. G.↗

Monolith catalysts for closed-cycle carbon dioxide lasers

The objective was to explore ways of making a monolithic form of catalyst for CO2 lasers. The approach chosen was to pelletize the catalyst material, Au/MnO2 powder, and epoxy the pellets to stainless steel sheets as structural supports. The CO oxidation reaction over Au/MnO2 powder was found to be first overall, and the reaction rate constant at room temperature was 4.4 +/- 0.3 cc/(g x sec). The activation energy was 5.7 kcal/mol. The BET surface area of the pellets was found to vary from 125 to 140 sq m/g between different batches of catalyst. Pellets epoxied to stainless steel strips showed no sign of fracture or dusting when subjected to thermal tests. Pellets can be dropped onto hard surfaces with chipping of edges but no breakage of the pellets. Mechanical strength tests performed on the pellets showed that the crush strength is roughly one-fourth of the pelletizing force. The apparent activity and activation energy over the pellets were found to be less than over the powdered form of the catalyst. The lower apparent activity and activation energy of the pellets are due to the fact that the internal surface area of a pellet is not exposed to the reactant concentration present in the flowing gas as a result of intrapellet diffusion resistance. Effectiveness factors varied from 0.44, for pellets having thickness of 2 mm and attached with epoxy to a stainless steel strip. The epoxy and the stainless steel strip were found to simply block off one of the circular faces of the pellets. The epoxy did not penetrate the pellets and block the active sites. The values of the effective diffusivities were estimated to be between 2.3 x 10(exp -3) and 4.9 x 10(exp -3) sq cm/s. With measurements performed on one powder sample and one pellet configuration, reasonable accurate predictions can be made of conversions that would be obtained with other pellet thickness and configurations.

Herz, Richard K.↗

Instabilities of line-driven stellar winds. V - Effect of an optically thick continuum

Earlier analyses of the linear instability of line-driven stellar winds are extended to the case, relevant to Wolf-Rayet stars, in which the continuum remains optically thick well above the sonic point. It is found that an optically thick flow driven by pure scattering lines is stabilized by the drag effect of the diffuse, scattered radiation. However, even a relatively small photon destruction probability can cause a flow with continuum optical thickness much greater than 1 to remain unstable, with a given growth rate. The implications of these results for the variability characteristics of winds from Wolf-Rayet stars are briefly discussed.

Owocki, Stanley P.↗

Models of the diffuse radar backscatter from Mars

The topographies of several debris flow units near the Mount St. Helens Volcano were measured at lateral scales of millimeters to meters in September 1990. The objective was to measure the surface roughness of the debris flows at scales smaller than, on the order of, and larger that the radar wavelength of common remote sensing radars. A laser profiling system and surveying instruments were used to obtain elevation data for square areas that varied in size from 10 to 32 cm. The elevation data were converted to estimates of the power spectrum of surface roughness. The conversions were based upon standard periodogram techniques, and upon a modified spectral estimation technique that was developed.

England, A. W.↗

Acoustic interactions between an altitude test facility and jet engine plumes: Theory and experiments

The overall objective of the described effort was to develop an understanding of the physical mechanisms involved in the flow/acoustic interactions experienced in full-scale altitude engine test facilities. This is done by conducting subscale experiments and through development of a theoretical model. Model cold jet experiments with an axisymmetric convergent nozzle are performed in a test setup that stimulates a supersonic jet exhausting into a cylindrical diffuser. The measured data consist of detailed flow visualization data and acoustic spectra for a free and a ducted plume. It is shown that duct resonance is most likely responsible by theoretical calculations. Theoretical calculations also indicate that the higher discrete tones observed in the measurements are related to the screech phenomena. Limited experiments on the sensitivity of a free 2-D, C-D nozzle to externally imposed sound are also presented. It is shown that a 2-D, C-D nozzle with a cutback is less excitable than a 2-D C-D nozzle with no cutback. At a pressure ratio of 1.5 unsteady separation from the diverging walls of the nozzle is noticed. This separation switches from one wall to the opposite wall thus providing an unsteady deflection of the plume. It is shown that this phenomenon is related to the venting provided by the cutback section.

Ahuja, K. K.↗

An investigation of the information propagation and entropy transport aspects of Stirling machine numerical simulation

Aspects of the information propagation modeling behavior of integral machine computer simulation programs are investigated in terms of a transmission line. In particular, the effects of pressure-linking and temporal integration algorithms on the amplitude ratio and phase angle predictions are compared against experimental and closed-form analytic data. It is concluded that the discretized, first order conservation balances may not be adequate for modeling information propagation effects at characteristic numbers less than about 24. An entropy transport equation suitable for generalized use in Stirling machine simulation is developed. The equation is evaluated by including it in a simulation of an incompressible oscillating flow apparatus designed to demonstrate the effect of flow oscillations on the enhancement of thermal diffusion. Numerical false diffusion is found to be a major factor inhibiting validation of the simulation predictions with experimental and closed-form analytic data. A generalized false diffusion correction algorithm is developed which allows the numerical results to match their analytic counterparts. Under these conditions, the simulation yields entropy predictions which satisfy Clausius' inequality.

Goldberg, Louis F.↗

Shadowing and the role of small diffusivity in the chaotic advection of scalars

Using techniques from shadowing theory, the solution of the scalar advection-diffusion equation is studied. It is shown that, under certain circumstances, the effect of small scalar diffusivity is to smooth the zero-diffusivity solution by averaging local fine-scaled structure against a Gaussian. The method of study depends on shadowing and thus fails for nonuniformly stretching systems, its failure suggesting the ways in which the effects of asymptotically small molecular diffusion can become nonlocal in chaotic fluid flows.

Klapper, I.↗

Mixing and mixing enhancement in supersonic reacting flowfields

Propulsion systems planned for use late in this century and beyond will require appropriate physical models for describing supersonic combustion and numerical techniques for solving the model governing equations. A computer program to study these flows is reported which considers the multicomponent diffusion and convection of important chemical species, the finite-rate reaction of these species, and the resulting interaction of the field mechanics and the chemistry. The application of the program to a spatially developing and reacting mixing layer, which serves an an excellent physical model for the mixing and reaction processes that take place in a scramjet combustor, is reported. Several techniques to enhance the fuel-air mixing and growth of that layer and improve its overall combustion efficiency are considered.

Drummond, J. P.↗

Numerical simulations of time-dependent cosmic ray mediated shocks

Recent research in unsteady shocks that are influenced by nonlinear aspects of diffusive particle acceleration and that involve multidimensional flows is outlined, and some of the difficulties in making further progress are discussed. It is suggested that in many situations it is probably not appropriate to assume steady states for astrophysical CR shocks. This results both from the need to be concerned about the finite rate at which CR pressure builds and modifies a shock and from the existence of instabilities. Even so, it seems likely that CR-modified shocks can develop to a state with substantial CR pressure. The overall acceleration efficiency and the CR particle momentum distribution produced in time-dependent flows typically depend on several details such as the ratio of various time scales and the initial proportion of relativistic to nonrelativistic particles in the CR populations.

Jones, T. W.↗