Search NASA⌕ Search

SEARCH · Search NASA

Results for “Equilibrium diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Contaminant Leaching From Intact Saltstone Monoliths - 17517

At the Department of Energy's (DOE's) Savannah River Site (SRS) chemically reducing materials, such as blast furnace slag (BFS), are added to grout formulations mixed with low-level radioactive salt solution in order to enhance the attenuation of redox sensitive contaminants (e.g., technetium-99 (Tc-99)). The resulting cementitious material, known as saltstone, is deposited in a series of concrete vaults for permanent disposal at the Saltstone Disposal Facility (SDF). Under oxidizing conditions, Tc persists as an anion in the +7 oxidation state, i.e., pertechnetate (TcO{sub 4}{sup -}), with very limited retention generally associated with amphoteric soil oxides. However, Tc(VII) is subject to chemical reduction to the +4 oxidation state, which is less soluble and mobile in the environment. Thus, chemically reducing grouts provide both a physical (i.e., low saturated hydraulic conductivities (K{sub sat}) that limit H{sub 2}O turnover and O{sub 2} exposure) and chemical barrier (i.e., residual reductive capacity) to contaminant release. However, many of the previous experiments evaluating the ability of saltstone to chemically reduce and immobilize Tc have been conducted using ground saltstone materials as sorbents, a practice that is likely to reduce the moisture level in the material, enhance exposure to O{sub 2} and alter sorbent properties in an unpredictable manner. Therefore, the objective of the current study was to evaluate contaminant leaching from intact monoliths that better represent the initial physical and chemical state of saltstone within the SDF disposal units. For the current study, saltstone simulants were produced utilizing SRR prescribed formulations: initial batches were spiked with rhenium (Re) to serve as nonradioactive analog for Tc-99, and subsequent batches were spiked with Tc-99 for comparison. The relative concentrations of I, Re and Tc-99 in the salt-waste simulants were consistent with the average concentrations of I-129 and Tc-99 in the low-level feed waste. In addition, SRR retrieved intact monoliths from Saltstone Disposal Unit (SDU) Cell 2A in 2015 for testing. Contaminant mass transfer rates for Tc-99 and other contaminants from spiked saltstone simulants and actual SDF saltstone samples were assessed using EPA Method 1315, Mass Transfer Rates of Constituents in Monolithic or Compacted Granular Materials Using a Semi-Dynamic Tank Leaching Procedure. This method was recently adopted for evaluating contaminant leaching from intact monolithic materials. Given the importance of redox speciation in controlling the mobility of Tc-99, the EPA mass transfer tests for the spiked simulants were initially conducted using leachates in equilibrium with three different test atmospheres: (1) oxic, (2) anoxic, and (3) anoxic reducing. Nitrate (NO{sub 3}{sup -}) leaching was evaluated as a poorly retained waste constituent. The leaching behavior of cesium-137 (Cs-137), representing about 98% of the initial radioactivity of the saltstone, was also evaluated for the SDU-extracted samples. Results from Method 1315 were also compared to a novel Dynamic Leaching Method (DLM) in which a flexible-wall permeameter was used to achieve saturated leaching under an elevated hydraulic gradient in an effort to evaluate the persistence of reductive capacity and subsequent changes in contaminant partitioning within intact saltstone monoliths. The composition of the chemical leachates from both tests was thoroughly analyzed in an effort to identify potential solid phases controlling contaminant partitioning through geochemical modeling. For the EPA 1315 tests using spiked simulants, Re leaching rates (and other poorly sorbing contaminants like NO{sub 3}{sup -} and iodine), as indicated by high effective diffusivities (D{sub e}) and low leachability indices (i.e. LI = - log[D{sub e}]), were much higher than Tc-99, which was attributed to poor initial reduction and/or rapid oxidation of Re, indicating that Re is a poor chemical analog for evaluating Tc partitioning under reducing conditions. Technetium-99 leaching rates for the spiked saltstone samples also appeared to be sensitive to the estimated reduction capacity of the dry feed materials used in making grout, a characteristic that can vary between different BFS sources. Technetium-99 leaching rates for the intact saltstone samples in the EPA 1315 test were quite similar, with less variability between the three test samples. This may be indicative of the longer curing time before the SDF samples were tested (∼3 years). Somewhat surprisingly, the leaching rates for Cs-137 from the SDF samples were generally lower than the poorly sorbing contaminants, NO{sub 3}{sup -} and iodine. For the DLM tests, Re leaching from spiked saltstone was much higher than observed for Tc-99, with rates similar to that of non-reactive grout constituents, consistent with EPA 1315 leaching rates. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Modeling the relative dynamics of DNA-coated colloids

Here, we construct a theoretical model for the dynamics of a microscale colloidal particle, modeled as an interval, moving horizontally on a DNA-coated surface, modelled as a line coated with springs that can stick to the interval. Averaging over the fast DNA dynamics leads to an evolution equation for the particle in isolation, which contains both friction and diffusion. The DNA-induced friction coefficient depends on the physical properties of the DNA, and substituting parameter values typical of a 1 μm colloid coated densely with weakly interacting DNA gives a coefficient about 100 times larger than the corresponding coefficient of hydrodynamic friction. We use a mean-field extension of the model to higher dimensions to estimate the friction tensor for a disc rotating and translating horizontally along a line. When the DNA strands are very stiff and short, the friction coefficient for the disc rolling approaches zero while the friction for the disc sliding remains large. Together, these results could have significant implications for the dynamics of DNA-coated colloids or other ligand-receptor systems, implying that DNA-induced friction between colloids can be stronger than hydrodynamic friction and should be incorporated into simulations, and that it depends nontrivially on the type of relative motion, possibly causing the particles to assemble into out-of-equilibrium metastable states governed by the pathways with the least friction.

36 MATERIALS SCIENCE↗

Insights into the mechanisms controlling the residual corrosion rate of borosilicate glasses

Borosilicate glasses are widely used to confine high-level radioactive wastes. The lifetime of these materials could reach hundreds of thousands of years if leaching of the glass into groundwater enables the formation of a passivating gel layer. Even in this regime, the glass will never stop corroding as thermodynamic equilibrium between glass and solution cannot be achieved. Therefore, accurate predictions of glass durability including passivation, require a deep understanding of the mechanisms controlling the so-called residual rate. However, despite tremendous efforts, these mechanisms remain poorly understood. Here, focusing on the behavior of the soluble elements of the International Simple Glass (B, Na, and Ca), we show that the residual rate is controlled by the behavior of B, a glass former supposed to dissolve instantaneously when in contact with water and thus widely considered as an ideal tracer. We then demonstrate that B release is controlled by multiple processes highly dependent on the pH. At the beginning of the passivating layer formation, the hydrolysis of B-O-Si linkages is rate-limiting and has an activation energy of ~60 kJ mol –1 , a value slightly lower than that for breaking Si-O-Si linkages. Once the fraction of closed pores resulting from gel restructuring is high enough, then diffusion of both reactants (water molecules) and some products (mainly B aq , Ca aq ) through the growing gel layer becomes rate-limiting. Consequently, B and Ca accumulate in an inner layer referred to as the active zone, with potential feedback on the B-O-Si hydrolysis. A new paradigm, including B as a key element of the system, is proposed to develop a comprehensive model for the corrosion of borosilicate glass.

36 MATERIALS SCIENCE↗

Generalized impurity pinch in partially magnetized multi-ion plasma

In a two-ion-species plasma with disparate ion masses, heavy ions tend to concentrate in the low-temperature region of collisionally magnetized plasma and in the high-temperature region of collisionally unmagnetized plasma, respectively. Moreover, collisional magnetization can be determined as the ratio of the light ion gyrofrequency to the collision frequency of light and heavy ion species, and the behavior of this effect in the intermediate regime of partially magnetized plasma is predominantly dependent on this Hall parameter. Multi-ion cross-field transport has been described before in the collisionally magnetized plasma regime, and generalized pinch relations, which describe densities of ion species in equilibrium in that plasma, are found in the literature. Here, the role of collisional magnetization and Larmor magnetization in multi-ion collisional transport is clarified, and generalized pinch relations are extended to the partially magnetized regime in which the ion Hall parameter may be small, as long as electrons remain collisionally magnetized. Equilibrium ion density profiles have the same dependence on external forces and on each other regardless of collisional magnetization of ions. The expansion of the range of validity of multi-ion collisional transport models makes them applicable to a wider range of laboratory plasma conditions. In particular, ion density profiles evolve sufficiently fast for radial impurity transport to be observable around stagnation on MagLIF, leading to expulsion of heavy ion impurities from the hotspot as long as plasma becomes sufficiently collisionally magnetized during the implosion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calculating n-point charge correlations in evolving systems

Background: In dynamic systems such as heavy-ion collisions, charge susceptibilities and local charge correlations change with time. These changes are accompanied by nonlocal correlations, which spread diffusively with time and are constrained by local charge conservation. Such correlations have been measured at the Relativistic Heavy-Ion Collider (RHIC) and have been linked to the chemical evolution of the matter and possible phase separation or critical phenomena. The evolution of such correlations has been modeled for two-point correlators superimposed onto hydrodynamics, but not for three- or four-point correlators. These higher-order correlators represent an essential basis for calculating the kurtosis and skewness of charge distributions measured at RHIC. For short-range correlations, such as those between charges on the same particle, and the associated charge-balance correlations a theoretical formalism was lacking for handling higher-order correlations. In particular, one needed to understand how higher-order charge fluctuations was split onto lower numbers of particles. For example, correlations of order three have contributions with charge all on one particle, split onto two particle, or split onto three. By assuming local chemical equilibrium of short-range correlations, the sources of the various correlators were found to be uniquely determined. The relevant theoretical foundation is presented here, including a diagrammatic technique to correctly account for all the possible terms to higher-order correlations. Here, we found a consistent theoretical treatment and its applicability, viability, and tractability are discussed. The formalism derived here enables realistic and quantitative modeling of the three- and four-point charge correlations necessary for understanding measurements of the kurtosis and skewness of charge distributions at RHIC. These observables have been promoted as signals of phase transitions or measures of chemical evolution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparison of analytic models of instability of rarefied gas flow in a channel

Numerical and analytical results are compared concerning the limit properties of the trajectories, attractors and bifurcations of rarefied gas flows in channels. The cascade of bifurcations obtained in our previous analytical and numerical investigations is simulated numerically for different scattering functions V generalizing the ray-diffuse reflection of gas particles from the surface. The main purpose of numerical simulation by Monte Carlo method is the investigation of the properties of different analytic nonlinear dynamic systems corresponding to rarefied gas flow in a channel. The results are compared as well for the models suggested originally by R. N. Miroshin, as for the approximations considered for the first time or for studied in our subsequent papers. Analytical solutions we obtained earlier for the ray reflection which means only one determined velocity of scattered from the walls gas atoms, generally different from the specular reflection. The nonlinear iterative equation describing a rarefied gas flow in a long channel becomes unstable in some regions of corresponding parameters of V (it means the sensitivity to boundary conditions). The values of the parameters are found from analytical approximations in these regions. Numerical results show that the chaotic behavior of the nonlinear dynamic system corresponds to strange attractors and distinguishes clearly from Maxwellian distribution and from the equilibrium on the whole. In the regions of instability (as the dimension of the attractor increases) the search for a corresponding state requires a lot more computation time and a lot of data (the amount of data required increases exponentially with embedding dimension). Therefore the main complication in the computation is reducing as well the computing time as the amount of data to find a suitably close solution. To reduce the computing time our analytical results are applied. Flow conditions satisfying the requirements to the experiment are indicated where the instability of considered type can be detected. The advantages and the drawbacks of considered approximations are detected and the features of obtained solutions are indicated. The recommendations are given for applying the results in practical applications and in numerical calculations of rarefied gas flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interfacial Behavior of Polymers: Using Interfaces to Manipulate Polymers

The self-assembly of block copolymers into arrays of nanoscopic domains with areal densities approaching 10 terbit/in2 offer tremendous promise for the fabrication of ultrahigh density storage devices, batteries and other energy relevant devices. Interfacial interactions play a key role in dictating the orientation and ordering of these self-assembling materials. We have investigated the use of preferential and neutral solvents to overcome interfacial interactions and to rapid accelerate the dynamics of these materials, since the high molecular weight of the polymers significantly slows diffusion processes. Using a tailor-made chamber, we have introduced solvent vapor annealing (SVA) where solvent with a well-defined vapor pressures sells the copolymer film, enabling control over the solvent content in the film and, therefore, the thermodynamics governing the microphase separation of the copolymer, the interactions with the substrate and air interfaces and the dynamics. This tailor-made chamber also allows us to perform in situ grazing incidence x-ray scattering studies where the copolymer films can be characterized on the nanoscopic level over macroscopic distances. The methodologies developed in our laboratories are now used in numerous laboratories world-wide. We have found that arrays of block copolymer microdomains with perfect orientational order can be achieved over macroscopic areas using the SVA processes but the translational order is perturbed during the film drying process. As the copolymer film is swollen, the confinement of the film to the substrate introduces a frustration to the ordering of the microdomains. After equilibrium is achieved, when the swollen films are brought very close to the ordering transition, near perfect ordering is achieved. However, upon removal of the solvent, the confinement of the film to the substrate introduces translational disorder. We have investigated the influence of the rate of solvent removal and have found that most rapid solvent removal process drives the copolymer film to below its glass transition temperature, freezing in the lateral order. We have quantitatively described the ordering and the parameters influencing the disruption of the ordering in these studies. We have also used e-beam lithography to generate shallow trench patterns on planar surface where the topographic patterning provides an additional constraint on the self-assembly of the block copolymer. The pitches of the trenches were varied while the depth and the trench width of patterns were maintained by constant at 89 and 30nm, respectively. Unidirectional PS-b-PEO line patterns over large area on the shallow trench patterns were obtained by solvent vapor annealing. We extended the solvent annealing process to an in-line coating process using a mini-slot die coater developed in our laboratories. This coater uses minimal materials with operating parameters that can mimic actual industrial processing on a roll-to-roll line. Most important, with this mini-slot die coater, it could also characterize the structure of the film using grazing incidence x-ray scattering. Using the fundamental characterization of the ordering of the block copolymers, we could optimize the coating conditions to enhance lateral ordering of block copolymer in a well-defined manner. The structures produced in this process are directly transferable to flexible electronics where the arrays of block copolymer microdomains can be used for the fabrication of nanostructured components. We have also controlled the orientation of BCP microdomains at the air and substrate interfaces by manipulating the interfacial interactions with selective solvents. This has enabled us to generate nanoporous membranes where the size of the pores is dictated by the size of the bloc copolymer microdomains. We have produced robust nanoporous membranes that can tolerate high pressures and have high throughput using thick films of block copolymers. Exceptional size selectivity has been achieved. The membranes are tolerant against acid and base washing and can be prepared over large areas. These membranes are finding applications in a water-purification and separations processes.

36 MATERIALS SCIENCE↗

Water Content of the Oceanic Lithosphere at Hawaii from FTIR Analysis of Peridotite Xenoliths

Although water in the mantle is mostly present as trace H dissolved in minerals, it has a large influence on its melting and rheological properties. The water content of the mantle lithosphere beneath continents is better constrained by abundant mantle xenolith data than beneath oceans where it is mainly inferred from MORB glass analysis. Using Fourier transform infrared (FTIR) spectrometry, we determined the water content of olivine (Ol), clinopyroxene (Cpx) and orthopyroxene (Opx) in spinel peridotite xenoliths from Salt Lake Crater, Oahu, Hawaii, which are thought to represent fragments of the Pacific oceanic lithosphere that was refertilized by alkalic Hawaiian melts. Only Ol exhibits H diffusion profiles, evidence of limited H loss during xenolith transport to the surface. Water concentrations (Ol: 9-28 ppm H2O, Cpx: 246-566 ppm H2O, Opx: 116-224 ppm H2O) are within the range of those from continental settings but higher than those from Gakkel ridge abyssal peridotites. The Opx H2O contents are similar to those of abyssal peridotites from Atlantic ridge Leg 153 (170-230 ppm) but higher than those from Leg 209 (10- 14 ppm). The calculated bulk peridotite water contents (94 to 144 ppm H2O) are in agreement with MORB mantle source water estimates and lower than estimates for the source of Hawaiian rejuvenated volcanism (approx 540 ppm H2O) . The water content of Cpx and most Opx correlates negatively with spinel Cr#, and positively with pyroxene Al and HREE contents. This is qualitatively consistent with the partitioning of H into the melt during partial melting, but the water contents are too high for the degree of melting these peridotites experienced. Melts in equilibrium with xenolith minerals have H2O/Ce ratios similar to those of OIB

Peslier, Anne H.↗

Enhanced heat transfer through filler-polymer interface by surface-coupling agent in heat-dissipation material: A non-equilibrium molecular dynamics study

Developing a composite material of polymers and micrometer-sized fillers with higher heat conductance is crucial to realize modular packaging of electronic components at higher densities. Enhancement mechanisms of the heat conductance of the polymer-filler interfaces by adding the surface-coupling agent in such a polymer composite material are investigated through the non-equilibrium molecular dynamics (MD) simulation. A simulation system is composed of α-alumina as the filler, bisphenol-A epoxy molecules as the polymers, and model molecules for the surface-coupling agent. The inter-atomic potential between the α-alumina and surface-coupling molecule, which is essential in the present MD simulation, is constructed to reproduce the calculated energies with the electronic density-functional theory. Through the non-equilibrium MD simulation runs, we find that the thermal resistance at the interface decreases significantly by increasing either number or lengths of the surface-coupling molecules and that the effective thermal conductivity of the system approaches to the theoretical value corresponding to zero thermal-resistance at the interface. Detailed analyses about the atomic configurations and local temperatures around the interface are performed to identify heat-transfer routes through the interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Field, frequency, and temperature dependencies of the surface resistance of nitrogen diffused niobium superconducting radio frequency cavities

We investigate the rf performance of several single-cell superconducting radio-frequency cavities subjected to low temperature heat treatment in nitrogen environment. The cavities were treated at temperature 120 – 165 ° C for an extended period of time (24–48 h) either in high vacuum or in a low partial pressure of ultrapure nitrogen. The improvement in Q 0 with a Q rise was observed when nitrogen gas was injected at ∼ 300 ° C during the cavity cooldown from 800 ° C and held at 165 ° C , without any degradation in accelerating gradient over the baseline performance. The treatment was applied to several elliptical cavities with frequency ranging from 0.75 to 3.0 GHz, showing an improved quality factor as a result of low temperature nitrogen treatments. The Q rise feature is similar to that achieved by nitrogen alloying Nb cavities at higher temperature, followed by material removal by electropolishing. The surface modification was confirmed by the change in electronic mean free path and tuned with the temperature and duration of heat treatment. The decrease of the temperature-dependent surface resistance with increasing rf field, resulting in a Q rise, becomes stronger with increasing frequency and decreasing temperature. The data suggest a crossover frequency of ∼ 0.95 GHz above that the Q rise phenomenon occurs at 2 K. Some of these results can be explained qualitatively with an existing model of intrinsic field-dependence of the surface resistance with both equilibrium and nonequilibrium quasiparticle distribution functions. The change in the Q slope below 0.95 GHz may result from masking contribution of trapped magnetic flux to the residual surface resistance. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗

Runaway electron deconfinement in SPARC and DIII-D by a passive 3D coil

The operation of a 3D coil—passively driven by the current quench (CQ) loop voltage—for the deconfinement of runaway electrons (REs) is modeled for disruption scenarios in the SPARC and DIII-D tokamaks. Nonlinear magnetohydrodynamic (MHD) modeling is carried out with the NIMROD code including time-dependent magnetic field boundary conditions to simulate the effect of the coil. Further modeling in some cases uses the ASCOT5 code to calculate advection and diffusion coefficients for REs based on the NIMROD-calculated fields, and the DREAM code to compute the runaway evolution in the presence of these transport coefficients. Compared with similar modeling in Tinguely et al (2021 Nucl. Fusion 61 124003), considerably more conservative assumptions are made with the ASCOT5 results, zeroing low levels of transport, particularly in regions in which closed flux surfaces have reformed. Of three coil geometries considered in SPARC, only the n = 1 coil is found to have sufficient resonant components to suppress the runaway current growth. Without the new conservative transport assumptions, full suppression of the RE current is maintained when the thermal quench MHD is included in the simulation or when the RE current is limited to 250kA, but when transport in closed flux regions is fully suppressed, these scenarios allow RE beams on the order of 1–2 MA to appear. Additional modeling is performed to consider the effects of the close ideal wall. In DIII-D, the CQ is modeled for both limited and diverted equilibrium shapes. In the limited shape, the onset of stochasticity is found to be insensitive to the coil current amplitude and governed largely by the evolution of the safety-factor profile. In both devices, prediction of the q-profile evolution is seen to be critical to predicting the later time effects of the coil.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multi-phase-field analysis of short-range forces between diffuse interfaces

Here, we characterize both analytically and numerically short-range forces between spatially diffuse interfaces in multi-phase-field models of polycrystalline materials. During late-stage solidification, crystal-melt interfaces may attract or repel each other depending on the degree of misorientation between impinging grains, temperature, composition, and stress. To characterize this interaction, we map the multiphase-field equations for stationary interfaces to a multidimensional classical mechanical scattering problem. From the solution of this problem, we derive asymptotic forms for short-range forces between interfaces for distances larger than the interface thickness. The results show that forces are always attractive for traditional models where each phase-field represents the phase fraction of a given grain. Those predictions are validated by numerical computations of forces for all distances. Based on insights from the scattering problem, we propose a multi-phase-field formulation that can describe both attractive and repulsive forces in real systems. This model is then used to investigate the influence of solute addition and a uniaxial stress perpendicular to the interface. Solute addition leads to bistability of different interfacial equilibrium states, with the temperature range of bistability increasing with strength of partitioning. Stress in turn, is shown to be equivalent to a temperature change through a standard Clausius-Clapeyron relation. The implications of those results for understanding grain boundary premelting are discussed.

36 MATERIALS SCIENCE↗

Measurement of Kinetic Parameters by Oscillated Experiments

The availability of reliable values of the kinetic parameters (effective delayed neutron fraction {beta} and effective mean neutron generation time {Lambda}) is important for reactor kinetic analyses and for reactivity monitoring when adopting the point kinetic approach. The kinetic parameters may be obtained either by simulations (Monte Carlo or deterministic) of the system or by direct measurements. Several methods have been proposed for the direct experimental determination of the kinetic parameters, e.g. control rod drops and noise analysis approaches, e.g. In this work, the problem of the determination of kinetic parameters in subcritical systems is tackled. The system is subjected to an oscillated source and the value of the ratio {beta}/{Lambda} is related to a measurable quantity when the system response reaches an equilibrium condition. In the analysis presented, a pure frequency is considered: when analyzing more complicated source periodic behaviours, a Fourier analysis can allow to isolate the contributions of individual frequencies. The phase difference between the oscillating source and the system response is adopted as the experimental observable. The method for the interpretation of the measurements is based on the standard point kinetic model. The response of the system is obtained by localized neutron detectors and, therefore, spatial and spectral effects may also affect the results. This drawback needs some further discussion and will be considered in the future work. The phase shift between the source signal and the system response may be analytically retrieved by Laplace transforming the point kinetic equations in the presence of an oscillated source. An explicit formula relates the phase shift to the ratio {beta}/{Lambda} and to the frequency of the source. Based on this relationship, the ratio {beta}/{Lambda} can be determined. To validate the technique, the experimental data are simulated by a numerical code solving the time-dependent diffusion equations for a source-driven system. The work allows to assess the possibility of the technique and its limits of applicability. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A mathematical and numerical framework for the analysis of compressible thermal convection in gases at very high temperatures

The relevance of non-equilibrium phenomena, nonlinear behavior, gravitational effects and fluid compressibility in a wide range of problems related to high-temperature gas-dynamics, especially in thermal, mechanical and nuclear engineering, calls for a concerted approach using the tools of the kinetic theory of gases, statistical physics, quantum mechanics, thermodynamics and mathematical modeling in synergy with advanced numerical strategies for the solution of the Navier–Stokes equations. The reason behind such a need is that in many instances of relevance in this field one witnesses a departure from canonical models and the resulting inadequacy of standard CFD approaches, especially those traditionally used to deal with thermal (buoyancy) convection problems. Starting from microscopic considerations and typical concepts of molecular dynamics, passing through the Boltzmann equation and its known solutions, we show how it is possible to remove past assumptions and elaborate an algorithm capable of targeting the broadest range of applications. Moving beyond the Boussinesq approximation, the Sutherland law and the principle of energy equipartition, the resulting method allows most of the fluid properties (density, viscosity, thermal conductivity, heat capacity and diffusivity, etc.) to be derived in a rational and natural way while keeping empirical contamination to the minimum. Special attention is deserved as well to the well-known pressure issue. With the application of the socalled multiple pressure variables concept and a projection-like numerical approach, difficulties with such a term in the momentum equation are circumvented by allowing the hydrodynamic pressure to decouple from its thermodynamic counterpart. The final result is a flexible and modular framework that on the one hand is able to account for all the molecule (translational, rotational and vibrational) degrees of freedom and their effective excitation, and on the other hand can guarantee adequate interplay between molecular and macroscopic-level entities and processes. Performances are demonstrated by computing some incompressible and compressible benchmark test cases for thermal (gravitational) convection, which are then extended to the high-temperature regime taking advantage of the newly developed features.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Velocity-space Origins of the Pressure–Strain Interaction in Multipopulation Distributions and Its Application to Magnetic Reconnection

A forefront research question is how energy evolves in weakly collisional plasmas for which departures from local thermodynamic equilibrium (LTE) are significant. The standard approach is studying the terms in the non-LTE energy evolution equation derived by taking the second moment of the Boltzmann equation, but the resultant fluid metrics do not retain information about which particles at which velocities drive energy evolution. A widely studied channel for internal energy density evolution is the pressure–strain interaction. Here, we employ the kinetic pressure–strain, a phase-space diagnostic whose velocity-space integral recovers the pressure–strain interaction to disambiguate the contributions to the pressure–strain interaction from disparate particle populations in composite phase-space densities. We develop phase-space analogs of the pressure–strain interaction decompositions to provide the phase-space origins of normal versus sheared flow. We introduce the “kinetic strain-rate” tensor, the phase-space analog of the strain-rate tensor, which we argue is needed to interpret the phase-space origins of the pressure–strain interaction. To demonstrate the utility of these quantities, we investigate them for composite electron distributions near the electron diffusion region in two-dimensional particle-in-cell simulations of antiparallel symmetric magnetic reconnection. We find that the phase-space-based diagnostics isolate the roles of distinct populations. These results contribute to a growing body of work providing new methods for quantifying phase-space energy evolution for a broad array of processes, from magnetic reconnection to collisionless shocks and turbulence, opening new pathways for answering longstanding problems of particle energization in weakly collisional plasmas.

79 ASTRONOMY AND ASTROPHYSICS↗

Nonlinear Fluctuating Hydrodynamics for the Classical XXZ Spin Chain

Using the framework of nonlinear fluctuating hydrodynamics (NFH), we examine equilibrium spatio-temporal correlations in classical ferromagnetic spin chains with nearest neighbor interactions. In particular, we consider the classical XXZ-Heisenberg spin chain (also known as Lattice Landau–Lifshitz or LLL model) evolving deterministically and chaotically via Hamiltonian dynamics, for which energy and z-magnetization are the only locally conserved fields. For the easy-plane case, this system has a low-temperature regime in which the difference between neighboring spin’s angular orientations in the XY plane is an almost conserved field. According to the predictions of NFH, the dynamic correlations in this regime exhibit a heat peak and propagating sound peaks, all with anomalous broadening. We present a detailed molecular dynamics test of these predictions and find a reasonably accurate verification. Additionally, we find that, in a suitable intermediate temperature regime, the system shows two sound peaks with Kardar-Parisi-Zhang (KPZ) scaling and a heat peak where the expected anomalous broadening is less clear. In high temperature regimes of both easy plane and easy axis case of LLL, our numerics show clear diffusive spin and energy peaks and absence of any sound modes, as one would expect. We also simulate an integrable version of the XXZ-model, for which the ballistic component instead moves with a broad range of speeds rather than being concentrated in narrower peaks around the sound speed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computational Studies of [Bmim][PF6]/n-Alcohol Interfaces with Many-Body Potentials

In this paper, we present the results from molecular-dynamics simulations of the equilibrium properties of liquid/liquid interfaces of room temperature ionic liquid [bmim][PF6] and simple alcohols (i.e., methanol, 1-butanol, and 1-hexanol) at room temperature. Polarizable potential models are employed to describe the interactions among species. Results from our simulations show stable interfaces between the ionic liquid and n-alcohols, and we found that the interfacial widths decrease from methanol to 1-butanol systems, and then increase for 1-hexanol interfaces. Angular distribution analysis reveals that the interface induces a strong orientational order of [bmim] and n-alcohol molecules near the interface, with [bmim] extending its butyl group into the alcohol phase while the alcohol has the OH group pointing into the ion liquid region, which is consistent with the recent sum-frequency-generation experiments. We found the interface to have a significant influence on the dynamics of ionic liquids and n-alcohols. The orientational autocorrelation functions illustrate that [bmim] rotate more freely near the interface than in the bulk, while the rotation of n-alcohol is hindered at the interface. Additionally, the time scale associated with the diffusion along the interfacial direction is found to be faster for [bmim] but slowed down for n-alcohols approaching the interface. We also calculate the dipole moment of n-alcohols as a function of the distance normal to the interface. We found that, even though methanol and 1-butanol have different dipole moments in bulk phase, they reach a similar value at the interface. This work was supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. Pacific Northwest National Laboratory is a multiprogram national laboratory operated for the Department of Energy by Battelle. The calculations were carried out using computer resources provided by the Office of Basic Energy Sciences.

Chang, Tsun-Mei↗