Search NASA⌕ Search

SEARCH · Search NASA

Results for “ION IMPLANTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Disorder accumulation and recovery in gold-ion irradiated 3C-SiC

A single-crystal 3C-SiC film on the Si/SiO2/Si (SIMOX) substrate was irradiated in different areas at 156 K with Au2+ ions to low fluences. The disorder profiles as a function of dose on both the Si and C sublattices have been determined in situ using a combination of 0.94 MeV D+ Rutherford backscattering spectrometry and nuclear reaction analysis in channeling geometry along the <100>, <110> and <111> axes. The results indicate that for the same damage state, the level of disorder on the Si sublattice in 3C-SiC follows a decreasing order along the <111>, <100> and <110> axes, while that on the C sublattice shows comparable values. Similar levels of Si and C disorder are observed along the <111> axis over the applied dose range. However, the level of C disorder is higher than that of Si disorder along either <100> or <110>. The amount of disorder recovery during thermal annealing processes depends on the sublattice (Si or C) and crystallographic orientation. Room-temperature recovery occurs for both sublattices in 3C-SiC irradiated to a dose of 0.047 dpa or lower. Significant recovery is observed along all directions during thermal annealing at 600 K. The results will be discussed and compared to those for 6H- and 4H-SiC under similar irradiation conditions.

36 MATERIALS SCIENCE↗

Modeling two-dimensional solid-phase epitaxial regrowth using level set methods

Modeling the two-dimensional (2D) solid-phase epitaxial regrowth (SPER) of amorphized Si (variously referred to as solid-phase epitaxial growth, solid-phase epitaxy, solid-phase epitaxial crystallization, and solid-phase epitaxial recrystallization) has become important in light of recent studies which have indicated that relative differences in the velocities of regrowth fronts with different crystallographic orientations can lead to the formation of device degrading mask edge defects. Here, a 2D SPER model that uses level set techniques as implemented in the Florida object oriented process simulator to propagate regrowth fronts with variable crystallographic orientation (patterned material) is presented. Apart from the inherent orientation dependence of the SPER velocity, it is established that regrowth interface curvature significantly affects the regrowth velocity. Specifically, by modeling the local SPER velocity as being linearly dependent on the local regrowth interface curvature, data acquired from transmission electron microscopy experiments matches reasonably well with simulations, thus providing a stable model for simulating 2D regrowth and mask edge defect formation in Si.

36 MATERIALS SCIENCE↗

Formation of ultrafine uniform gold nanoparticles by sputtering and redeposition

Uniformly distributed Au nanoparticles with controllable size were fabricated by focused ion beam bombardment of thin gold films. In situ scanning electron microscopy and ex situ transmission electron microscopy were used to characterize the nanoparticles. Results show that a dual particle size distribution was generated at low ion fluence, while highly uniform Au particles with diameters around 2 nm formed at high fluence. The balance between sputtering and redeposition is responsible for the formation and size control of the nanoparticles. Optical absorption measurement revealed strong size dependant resonances that are attributed to the surface plasmon resonance of the Au particles.

36 MATERIALS SCIENCE↗

Modification of Polymer Materials by Ion Bombardment: Case Studies

The paper discusses possibility of application of ion beam bombardment for modification of polymers. Changes to composition, structure and morphology of the surface layer produced by the treatment and their influence on engineering and functional properties of wide range of polymer materials are presented. Special attention has been devoted to modification of tribological properties. Ion bombardment results in significant reduction of friction, which can be explained by increase of hardness and wettability of polymer materials. Hard but thin enough skin does not result in cracking but improves their abrasion resistance. Contrary to conventional chemical treatment ion beam bombardment works even for polymers hardly susceptible to modification like silicone rubber or polyolefines.

36 MATERIALS SCIENCE↗

Ion Beam Etching: Replication of Micro Nano-structured 3D Stencil Masks

Ion beam LIGA allows the etching of 3D nano-structures by direct writing with a nano-sized beam. However, this is a relatively time consuming process. We propose here another approach for etching structures on large surfaces and faster, compared to the direct writing process. This approach consists of replicating 3D structured masks, by scanning an unfocused ion beam. A polymer substrate is placed behind the mask, as in UV photolithography. But the main advantage is that the 3D structure of the mask can be replicated into the polymer. For that purpose, the masks (developped at LMIS1, EPFL) are made of a silicon nitride membrane 100 nm thick, on which 3D gold structures up to 200 nm thick, are deposited. The 3D Au structures are made with the nanostencil method, based on successive gold deposition. The IMA institute, from HE-Arc, owns a High Voltage Engineering 1.7 MV Tandetron with both solid and gaseous negative ion sources, able to generate ions from almost every chemical element in a broad range of energies comprised between 400 keV and 6.8 MeV. The beam composition and energy are chosen in such a way, that ions lose a significant fraction of their energy when passing through the thickest regions of the mask. Ions passing through thinner regions of the mask loose a smaller fraction of their energy and etch the polymer with larger thicknesses, allowing a replication of the mask into the polymer. For our trials, we have used a carbon beam with an energy of 500 keV. The beam was focussed to a diameter of 5 mm with solid slits, in order to avoid border effects and thus ensure a homogeneous dose distribution on the beam diameter. The feasibility of this technique has been demonstrated, allowing industrial applications for micro-mould fabrication, micro-fluidics and micro-optics.

36 MATERIALS SCIENCE↗

Improved diamond surfaces following lift-off and plasma treatments as observed by x-ray absorption spectroscopy

We have investigated the nature of the residual damage in diamond crystals following the ion implantation/graphitization ''lift-off'' process, using near-edge x-ray absorption fine structure spectroscopy and transmission electron microscopy. A defective but crystalline interface is found, which displays dense pre-edge unoccupied states and an almost complete loss of the core-level C 1s exciton signature. This residual crystalline damage is resistant to standard chemical etching, however a hydrogen plasma treatment is found to completely recover a pristine diamond surface. Analysis and removal of residual ion-induced damage is considered crucial to the performance of many diamond device architectures.

36 MATERIALS SCIENCE↗

Dopant characterization in self-regulatory plasma doped fin field-effect transistors by atom probe tomography

Fin field-effect transistors are promising next-generation electronic devices, and the identification of dopant positions is important for their accurate characterization. We report atom probe tomography (APT) of silicon fin structures prepared by a recently developed self-regulatory plasma doping (SRPD) technique. Trenches between fin-arrays were filled using a low-energy focused ion beam to directly deposit silicon, which allowed the analysis of dopant distribution by APT near the surface of an actual fin transistor exposed to air. We directly demonstrate that SRPD can achieve a boron concentration above 1 x 10{sup 20} atoms/cm{sup 3} at the fin sidewall.

36 MATERIALS SCIENCE↗

Tailoring interfacial exchange coupling with low-energy ion beam bombardment: Tuning the interface roughness

By ascertaining NiO surface roughness in a Ni{sub 80}Fe{sub 20}/NiO film system, we were able to correlate the effects of altered interface roughness from low-energy ion-beam bombardment of the NiO layer and the different thermal instabilities in the NiO nanocrystallites. From experiment and by modelling the temperature dependence of the exchange bias field and coercivity, we have found that reducing the interface roughness and changing the interface texture from an irregular to striped conformation enhanced the exchange coupling strength. Our results were in good agreement with recent simulations using the domain state model that incorporated interface mixing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation mechanisms of embedded nanocrystals in SiN{sub x}

We have investigated the formation of embedded nanocrystals (NCs) in SiN{sub x} using Ga{sup +} focused-ion beam irradiation of SiN{sub x} membranes, followed by rapid thermal annealing (RTA). During irradiation, redeposition is enhanced by developing side walls, leading to enhanced near-surface [Ga] and [Si]. Subsequent RTA leads to the formation of Si and Ga NCs embedded in SiN{sub x}. When the ratio of the irradiated area to the sidewall area is increased, redeposition is limited, and SiN{sub x} and GaN NCs are also apparent. We discuss the effect of limited redeposition on NC formation and the catalytic effect of Ga on Si NC nucleation and growth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of the magnetic interfacial exchange energy at a specific interface in NiFe/CoO/Co trilayer thin films via ion-beam modification

A series of ferromagnetic Ni{sub 80}Fe{sub 20}(55 nm)/antiferromagnetic CoO (25 to 200 nm)/ferromagnetic Co (55 nm)/SiO{sub 2}(substrate) trilayer thin films were fabricated by ion-beam assisted deposition in order to understand the role of ion beam modification on the interfacial and interlayer coupling. The microstructural study using transmission electron microscopy, X-ray reflectometry, and polarised neutron reflectometry showed that ion-beam modification during the deposition process led to an oxygen-rich Co/CoO nanocomposite interface region at the bottom layer. This interface caused a high exchange bias field for the ferromagnetic cobalt. However, the exchange bias for top permalloy ferromagnet remained low, in line with expectations from the literature for the typical interfacial energy. This suggest that the ion-beam enhancement of the magnetic exchange bias is localized to the Co/CoO interface where local microstructural effects provide the dominant mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of ion and nanosecond-pulsed laser co-irradiation on the surface nanostructure of Au thin films on SiO{sub 2} glass substrates

Ion irradiation and short-pulsed laser irradiation can be used to form nanostructures on the surfaces of substrates. This work investigates the synergistic effects of ion and nanosecond-pulsed laser co-irradiation on surface nanostructuring of Au thin films deposited under vacuum on SiO{sub 2} glass substrates. Gold nanoparticles are randomly formed on the surface of the substrate after nanosecond-pulsed laser irradiation under vacuum at a wavelength of 532 nm with a repetition rate of 10 Hz and laser energy density of 0.124 kJ/m{sup 2}. Gold nanoparticles are also randomly formed on the substrate after 100-keV Ar{sup +} ion irradiation at doses of up to 3.8 × 10{sup 15} ions/cm{sup 2}, and nearly all of these nanoparticles are fully embedded in the substrate. With increasing ion irradiation dose (number of incident laser pulses), the mean diameter of the Au nanoparticles decreases (increases). However, Au nanoparticles are only formed in a periodic surface arrangement after co-irradiation with 6000 laser pulses and 3.8 × 10{sup 15} ions/cm{sup 2}. The periodic distance is ∼540 nm, which is close to the wavelength of the nanosecond-pulsed laser, and the mean diameter of the Au nanoparticles remains at ∼20 nm with a relatively narrow distribution. The photoabsorption peaks of the ion- or nanosecond-pulsed laser-irradiated samples clearly correspond to the mean diameter of Au nanoparticles. Conversely, the photoabsorption peaks for the co-irradiated samples do not depend on the mean nanoparticle diameter. This lack of dependence is likely caused by the periodic nanostructure formed on the surface by the synergistic effects of co-irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Negative differential transconductance in silicon quantum well metal-oxide-semiconductor field effect/bipolar hybrid transistors

Introducing explicit quantum transport into Si transistors in a manner amenable to industrial fabrication has proven challenging. Hybrid field-effect/bipolar Si transistors fabricated on an industrial 45 nm process line are shown to demonstrate explicit quantum transport signatures. These transistors incorporate a lateral ion implantation-defined quantum well (QW) whose potential depth is controlled by a gate voltage (V{sub G}). Quantum transport in the form of negative differential transconductance (NDTC) is observed to temperatures >200 K. The NDTC is tied to a non-monotonic dependence of bipolar current gain on V{sub G} that reduces drain-source current through the QW. These devices establish the feasibility of exploiting quantum transport to transform the performance horizons of Si devices fabricated in an industrially scalable manner.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Freestanding single-crystalline magnetic structures fabricated by ion bombardment

Starting from an ultrathin Fe film grown epitaxially on top of a GaAs(001) substrate, we show that freestanding structures can be created by ion-beam treatment. These structures are single-crystalline blisters and only a few nanometers thick. Anisotropic stress in the rim of a blister induces magnetic domain states magnetized in the direction normal to the blister edge. Experimental evidence is provided that the lateral size can be confined by starting from a nanostructured template.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Néel walls between tailored parallel-stripe domains in IrMn/CoFe exchange bias layers

Tailored parallel-stripe magnetic domains with antiparallel magnetizations in adjacent domains along the long stripe axis have been fabricated in an IrMn/CoFe Exchange Bias thin film system by 10 keV He{sup +}-ion bombardment induced magnetic patterning. Domain walls between these domains are of Néel type and asymmetric as they separate domains of different anisotropies. X-ray magnetic circular dichroism asymmetry images were obtained by x-ray photoelectron emission microscopy at the Co/Fe L{sub 3} edges at the synchrotron radiation source BESSY II. They revealed Néel-wall tail widths of 1 μm in agreement with the results of a model that was modified in order to describe such walls. Similarly obtained domain core widths show a discrepancy to values estimated from the model, but could be explained by experimental broadening. The rotation senses in adjacent walls were determined, yielding unwinding domain walls with non-interacting walls in this layer system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical studies of ion-beam synthesized metal alloy nanoparticles

Au{sub x}Ag{sub 1-x} alloy nanoparticles with tunable surface plasmon resonance (SPR) have been synthesized on a silica glass substrate. A small Au foil on an Ag foil is irradiated as target substrates such that ion beam falls on both Ag foil and Au foils. Silica slides are kept at an angle ∼45° with respect to the metallic foils. While irradiating the metallic foils with 100 keV Ar{sup +} ions, sputtered Au and Ag atoms get deposited on the silica-glass. In this configuration the foils have been irradiated by Ar{sup +} ions to various fluences at room temperature and the sputtered species are collected on silica slides. Formation of Au{sub x}Ag{sub 1-x} nanoparticles has been confirmed from the optical absorption measurements. With respect to the exposure area of Au and Ag foils to the ion beam, the SPR peak position varies from 450 to 500 nm. Green photoluminescence has been observed from these alloy metal nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In operandi observation of dynamic annealing: A case study of boron in germanium nanowire devices

We report on the implantation of boron in individual, electrically contacted germanium nanowires with varying diameter and present a technique that monitors the electrical properties of a single device during implantation of ions. This method gives improved access to study the dynamic annealing ability of the nanowire at room temperature promoted by its quasi-one-dimensional confinement. Based on electrical data, we find that the dopant activation efficiency is nontrivially diameter dependent. As the diameter decreases, a transition from a pronounced dynamic-annealing to a radiation-damage dominated regime is observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Void-interface wetting to crossing transition owing to bubble to void transformation

Understanding cavity-interface interaction is crucial in designing high-strength, radiation-tolerant nanocomposites. In this work, bubbles near the Cu–Nb interface in Nb could be absorbed by Cu voids wetting the interface due to the high system energy difference produced by the huge pressure difference between the bubbles and voids and high mobility of bubbles, and no bubble-denuded zone forms owing to fast Brownian motion of bubbles, which keeps bubbles distributed homogeneously. However, owing to the low system energy difference generated by the low internal pressure difference and low mobility, voids near the Cu–Nb interface in Nb would simply coalesce with Cu voids wetting the interface, leading to the void-interface wetting to crossing transition and the formation of void-denuded zones due to the negligible migration of internal Nb voids.

36 MATERIALS SCIENCE↗

Direct formation of nitrogen-vacancy centers in nitrogen doped diamond along the trajectories of swift heavy ions

We report depth-resolved photoluminescence measurements of nitrogen-vacancy (NV$^-$) centers formed along the tracks of swift heavy ions in type Ib synthetic single crystal diamonds that had been doped with 100 ppm nitrogen during crystal growth. Analysis of the spectra shows that NV$^-$ centers are formed preferentially within regions where electronic stopping processes dominate and not at the end of the ion range where elastic collisions lead to formation of vacancies and defects. Thermal annealing further increases NV yields after irradiation with SHI preferentially in regions with high vacancy densities. NV centers formed along the tracks of single swift heavy ions can be isolated with lift-out techniques for explorations of color center qubits in quasi 1D registers with average qubit spacing of a few nm and of order 100 color centers per micron along 10 to 30 micron long percolation chains.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗