Search NASA⌕ Search

SEARCH · Search NASA

Results for “Loss function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Adjoint Fokker-Planck equation and runaway electron dynamics

The adjoint Fokker-Planck equation method is applied to study the runaway probability function and the expected slowing-down time for highly relativistic runaway electrons, including the loss of energy due to synchrotron radiation. In direct correspondence to Monte Carlo simulation methods, the runaway probability function has a smooth transition across the runaway separatrix, which can be attributed to effect of the pitch angle scattering term in the kinetic equation. However, for the same numerical accuracy, the adjoint method is more efficient than the Monte Carlo method. The expected slowing-down time gives a novel method to estimate the runaway current decay time in experiments. A new result from this work is that the decay rate of high energy electrons is very slow when E is close to the critical electric field. This effect contributes further to a hysteresis previously found in the runaway electron population.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Wall loss of atomic nitrogen determined by ionization threshold mass spectrometry

In the afterglow of an inductively coupled N{sub 2} plasma, relative N atom densities are measured by ionization threshold mass spectrometry as a function of time in order to determine the wall loss time t{sub wN} from the exponential decay curves. The procedure is performed with two mass spectrometers on different positions in the plasma chamber. t{sub wN} is determined for various pressures, i.e., for 3.0, 5.0, 7.5, and 10 Pa. For this conditions also the internal plasma parameters electron density n{sub e} and electron temperature T{sub e} are determined with the Langmuir probe and the rotational temperature T{sub rot}{sup N{sub 2}} of N{sub 2} is determined with the optical emission spectroscopy. For T{sub rot}{sup N{sub 2}}, a procedure is presented to evaluate the spectrum of the transition υ{sup ′}=0→υ{sup ″}=2 of the second positive system (C{sup 3}Π{sub u}→B{sup 3}Π{sub g}) of N{sub 2}. With this method, a gas temperature of 610 K is determined. For both mass spectrometers, an increase of the wall loss times of atomic nitrogen with increasing pressure is observed. The wall loss time measured with the first mass spectrometer in the radial center of the cylindrical plasma vessel increases linearly from 0.31 ms for 3 Pa to 0.82 ms for 10 Pa. The wall loss time measured with the second mass spectrometer (further away from the discharge) is about 4 times higher. A model is applied to describe the measured t{sub wN.} The main loss mechanism of atomic nitrogen for the considered pressure is diffusion to the wall. The surface loss probability β{sub N} of atomic nitrogen on stainless steel was derived from t{sub wN} and is found to be 1 for the present conditions. The difference in wall loss times measured with the mass spectrometers on different positions in the plasma chamber is attributed to the different diffusion lengths.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PPPC 4 DM ID: a poor particle physicist cookbook for dark matter indirect detection

We provide ingredients and recipes for computing signals of TeV-scale Dark Matter annihilations and decays in the Galaxy and beyond. For each DM channel, we present the energy spectra at production, computed by high-statistics simulations. We estimate the Monte Carlo uncertainty by comparing the results yielded by the Pythia and Herwig event generators. We then provide the propagation functions for charged particles in the Galaxy, for several DM distribution profiles and sets of propagation parameters. Propagation of e{sup ±} is performed with an improved semi-analytic method that takes into account position-dependent energy losses in the Milky Way. Using such propagation functions, we compute the energy spectra of e{sup ±}, p-bar and d-bar at the location of the Earth. We then present the gamma ray fluxes, both from prompt emission and from Inverse Compton scattering in the galactic halo. Finally, we provide the spectra of extragalactic gamma rays. All results are available in numerical form and ready to be consumed.

79 ASTRONOMY AND ASTROPHYSICS↗

Performance Analysis of 0.4–1.2-μm CdTe Solar Cells

Thin-film CdTe solar cells with an absorber thickness range of 0.4 to 1.2 μm were fabricated by close-space sublimation on a transparent MgZnO window layer. Microscopy cross sections showed that a significant fraction of the CdTe crystallites extended throughout the absorber layer, and capacitance measurements demonstrated that the absorbers were depleted into forward bias. Current and fill factor loss analyses were used to identify dominant loss mechanisms in the devices as a function of absorber thickness, and photoluminescence measurements were increasingly influenced by back-surface recombination as the absorber was made thinner. Furthermore, the thinner CdTe devices showed modest current and fill factor reduction but overall good diode quality, and the highest efficiency of 15% was achieved with 1.2 μm CdTe.

14 SOLAR ENERGY↗

Fermi-Teller Theory of Low Velocity Ionization Losses Applied to Monopoles

Recently there has developed a renewed interest in the ionization losses of slow monopoles. An excellent summary of the literature is contained in a paper of Ahlen and Kinoshital (hereafter referred to as A.K.). A.K. have derived lower bounds for the ionization losses of a slow monopole passing through matter. However, they neglected the effects of an energy gap, in insulating materials, on the excitation of atomic electrons. Using the Thomas-Fermi statistical model of atomic wave functions, we have calculated lower bounds for ionization losses in "insulators" including effects due to an energy gap. The Fermi-Teller theory 2 (hereafter referred-to as F.T.) was originally used to predict the stopping, by ionization losses, of slow charged particles in materials. The theory is based on a calculation of the energy lost to a uniform "Fermi sea". However, the authors note that the actual "Fermi velocity" cancels out in the derivation. Therefore their calculated results also apply to a "Thomas-Fermi" atom, in which each volume element is considered to be a Fermi sea filled to the top of the potential well with atomic electrons.

Ritson, D.↗

Thermo-oxidative stability studies of PMR-15 polymer matrix composites reinforced with various fibers

An experimental study was conducted to measure the thermo-oxidative stability of PMR-15 polymer matrix composites reinforced with various fibers and to observe differences in the way they degrade in air. The fibers that were studied included graphite and the thermally stable Nicalon and Nextel ceramic fibers. Weight loss rates for the different composites were assessed as a function of mechanical properties, specimen geometry, fiber sizing, and interfacial bond strength. Differences were observed in rates of weight loss, matrix cracking, geometry dependency, and fiber-sizing effects. It was shown that Celion 6000 fiber-reinforced composites do not exhibit a straight-line Arrhenius relationship at temperatures above 316 C.

Bowles, Kenneth J.↗

Thermo-oxidative stability studies of PMR-15 polymer matrix composites reinforced with various continuous fibers

An experimental study was conducted to measure the thermooxidative stability of PMR-15 composites reinforced with various fibers and to observe differences in the way they degrade in air. The fibers studied include graphite and the thermally stable Nicalon and Nextel ceramic fibers. Weight-loss rates for the different composites were assessed as a function of mechanical properties, specimen geometry, fiber sizing, and interfacial bond strength. Differences were observed in rates of weight loss, matrix cracking, geometry dependency, and fiber sizing effects. It was shown that Celion 6000 fiber-reinforced composites do not exhibit a straight-line Arrhenius relationship at temperatures above 316 C.

Bowles, Kenneth J.↗

N(N)-nicotinic blockade as an acute human model of autonomic failure

Pure autonomic failure has been conceptualized as deficient sympathetic and parasympathetic innervation. Several recent observations in chronic autonomic failure, however, cannot be explained simply by loss of autonomic innervation, at least according to our current understanding. To simulate acute autonomic failure, we blocked N(N)-nicotinic receptors with intravenous trimethaphan (6+/-0.4 mg/min) in 7 healthy subjects (4 men, 3 women, aged 32+/-3 years, 68+/-4 kg, 171+/-5 cm). N(N)-Nicotinic receptor blockade resulted in near-complete interruption of sympathetic and parasympathetic efferents as indicated by a battery of autonomic function tests. With trimethaphan, small postural changes from the horizontal were associated with significant blood pressure changes without compensatory changes in heart rate. Gastrointestinal motility, pupillary function, saliva production, and tearing were profoundly suppressed with trimethaphan. Plasma norepinephrine level decreased from 1.1+/-0.12 nmol/L (180+/-20 pg/mL) at baseline to 0.23+/-0.05 nmol/L (39+/-8 pg/mL) with trimethaphan (P<.001). There was a more than 16-fold increase in plasma vasopressin (P<.01) and no change in plasma renin activity. We conclude that blockade of N(N)-cholinergic receptors is useful to simulate the hemodynamic alterations of acute autonomic failure in humans. The loss of function with acute N(N)-cholinergic blockade is more complete than in most cases of chronic autonomic failure. This difference may be exploited to elucidate the contributions of acute denervation and chronic adaptation to the pathophysiology of autonomic failure. N(N)-Cholinergic blockade may also be applied to study human cardiovascular physiology and pharmacology in the absence of confounding baroreflexes.

Non-NASA Center↗

Information loss, mixing and emergent type III 1 factors

A manifestation of the black hole information loss problem is that the two-point function of probe operators in a large Anti-de Sitter black hole decays in time, whereas, on the boundary CFT, it is expected to be an almost periodic function of time. We point out that the decay of the two-point function (clustering in time) holds important clues to the nature of observable algebras, states, and dynamics in quantum gravity. We call operators that cluster in time “mixing” and explore the necessary and sufficient conditions for mixing. The information loss problem is a special case of the statement that in type I algebras, there exists no mixing operators. We prove that, in a thermofield double state (KMS state), if mixing operators form an algebra (close under multiplication), the resulting algebra must be a von Neumann type III 1 factor. In other words, the physically intuitive requirement that all nonconserved operators should exponentially mix is so strong that it fixes the observable algebra to be an exotic algebra called a type III1 factor. More generally, for an arbitrary out-of-equilibrium state of a general quantum system (von Neumann algebra), we show that if the set of operators that mix under modular flow forms an algebra, it is a type III1 von Neumann factor.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Reliability and Probabilistic Risk Assessment - How They Play Together

Since the Space Shuttle Challenger accident in 1986, NASA has extensively used probabilistic analysis methods to assess, understand, and communicate the risk of space launch vehicles. Probabilistic Risk Assessment (PRA), used in the nuclear industry, is one of the probabilistic analysis methods NASA utilizes to assess Loss of Mission (LOM) and Loss of Crew (LOC) risk for launch vehicles. PRA is a system scenario based risk assessment that uses a combination of fault trees, event trees, event sequence diagrams, and probability distributions to analyze the risk of a system, a process, or an activity. It is a process designed to answer three basic questions: 1) what can go wrong that would lead to loss or degraded performance (i.e., scenarios involving undesired consequences of interest), 2) how likely is it (probabilities), and 3) what is the severity of the degradation (consequences). Since the Challenger accident, PRA has been used in supporting decisions regarding safety upgrades for launch vehicles. Another area that was given a lot of emphasis at NASA after the Challenger accident is reliability engineering. Reliability engineering has been a critical design function at NASA since the early Apollo days. However, after the Challenger accident, quantitative reliability analysis and reliability predictions were given more scrutiny because of their importance in understanding failure mechanism and quantifying the probability of failure, which are key elements in resolving technical issues, performing design trades, and implementing design improvements. Although PRA and reliability are both probabilistic in nature and, in some cases, use the same tools, they are two different activities. Specifically, reliability engineering is a broad design discipline that deals with loss of function and helps understand failure mechanism and improve component and system design. PRA is a system scenario based risk assessment process intended to assess the risk scenarios that could lead to a major/top undesirable system event, and to identify those scenarios that are high-risk drivers. PRA output is critical to support risk informed decisions concerning system design. This paper describes the PRA process and the reliability engineering discipline in detail. It discusses their differences and similarities and how they work together as complementary analyses to support the design and risk assessment processes. Lessons learned, applications, and case studies in both areas are also discussed in the paper to demonstrate and explain these differences and similarities.

Safie, Fayssal↗

Correction of Fluorescent Images of Biological Tissues for the Effects of Light Absorption and Scattering

A method for correcting the influence of light attenuation processes in biological tissues on their fluorescent images is proposed. The transfer function that takes into account the radiation losses in the medium at the wavelengths of excitation and emission of fluorescence is calculated analytically, depending on the transport scattering index and the hemoglobin tissue index. The latter is determined on the basis of a color image of the tissue in reflected visible light. Verification of the developed method was carried out on the basis of computer simulation of fluorescent images of biological tissue by the Monte Carlo method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In-situ observation of inhomogeneous degradation in large format Li-ion cells by neutron diffraction

This work presents a non-destructive in-situ method for probing degradation mechanisms in large format, operating, commercial lithium-ion batteries by neutron diffraction. A fresh battery (15 Ah capacity) was shown to have a uniform (homogeneous) local state of charge (SOC) at 4.0 V (9 Ah SOC) and 4.2 V (15 Ah SOC), with 1.33 C and 2.67 C charging rates, respectively. This battery was then aggressively cycled until it retained only a 9 Ah capacity, 60% of its original value. Inhomogeneous deterioration in the battery was observed: near the edges, both the graphite anode and the spinel-based cathode showed a significant loss of capacity, while near the central area, both electrodes functioned properly. An SOC mapping measurement of the degraded battery in the fully charged state (4.2 V) indicated that the loss of local capacity of the anode and cathode is coupled.

25 ENERGY STORAGE↗

Growth, structural, optical, thermal and mechanical properties of cytosinium hydrogen selenite: A novel nonlinear optical single crystal

Highlights: • Growth of bulk single crystals of cytosinium hydrogen selenite (CHS) is reported. • Dielectric constant of CHS is measured as a function of Frequency and temperature. • Lower cut off value of UV–vis-NIR spectrum of CHS crystal is observed at 210 nm. • Meyer’s index value of CHS crystal calculated identifies it as a soft material. • Powder SHG efficiency of CHS is about 1.5 times that of KDP crystal. - Abstract: A novel nonlinear optical single crystal of cytosinium hydrogen selenite was grown from aqueous solution of cytosinium hydrogen selenite by slow solvent evaporation method at room temperature. The structural properties of grown crystal have been studied by single crystal and powder X-ray diffraction analysis. Presence of various functional groups was identified from Fourier transform infrared spectroscopy. The optical transmittance and absorbance spectra were recorded by UV–vis-NIR spectrometer and the grown crystal possesses good transparency in the entire visible region. The dielectric constant and dielectric loss of the crystal were calculated as a function of frequency at different temperatures. The mechanical strength of the cytosinium hydrogen selenite crystal was estimated using Vicker’s microhardness tester. Etch patterns of the cytosinium hydrogen selenite crystal were obtained using distilled water as etchant for different etching time. Second harmonic generation efficiency tested using Nd:YAG laser is about 1.5 times that of KDP.

36 MATERIALS SCIENCE↗

Structure of Layers Formed by [2-(3,6-Disubstituted-9 H -carbazol-9-yl)ethyl]phosphonic Acids on Metal Oxides

[2-(9 H -Carbazol-9-yl)ethyl]phosphonic acid (2PACz) and its derivatives are being used extensively as hole-transport layers in organic and perovskite solar cells due to their ability to modify electrode work function, surface wettability, and in some cases, to improve active-layer adhesion, while minimizing interfacial energy losses. The orientation and coverage of surface modifiers significantly impact these functional properties; however, the detailed structure and packing in these overlayers are challenging to investigate, leading to a lack of understanding of how this structure and packing influence performance and limiting the ability to rationally design molecular modifiers. Here, we investigate monolayers of 2-(9 H -carbazol-9-yl)ethyl phosphonic acid derivatives (from here on referred to as X-2PACz) on indium tin oxide (ITO) and alpha phase aluminum oxide (α-Al 2 O 3 ) using a combination of X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, and X-ray reflectivity (XRR). By correlating elemental ratios, molecular orientation, and electron density profiles, we directly quantify surface coverage, layer thickness, and molecular tilt across a series of chemically related monolayers. We find that 2PACz and the X-2PACz derivatives form dense monolayers on α-Al 2 O 3 and ITO, with similar surface coverages on either substrate that are inversely proportional to molecular steric bulk. These surface coverage results indicate that X-2PACz is sterically limited in its monolayer surface packing density, as opposed to site limited. Despite surface packing density differences between molecules, the NEXAFS data show a constant average molecular orientation of 61° to 65° between the plane of the carbazole and the substrate for all the molecules on both substrates. These results increase our general understanding of 2PACz derivatives as they become increasingly useful in high performance solar cells.

NEXAFS↗

H{sub 2} EJECTION FROM POLYCYCLIC AROMATIC HYDROCARBONS: INFRARED MULTIPHOTON DISSOCIATION STUDY OF PROTONATED ACENAPHTHENE AND 9,10-DIHYDROPHENANTHRENE

The infrared multiple-photon dissociation (IRMPD) spectra of protonated acenaphthene ([ACN+H]{sup +}) and 9,10-dihydrophenanthrene ([DHP+H]{sup +}) have been recorded using an infrared free electron laser after the compounds were protonated by electrospray ionization and trapped in a Fourier transform ion cyclotron mass spectrometer. In both compounds, the loss of two mass units is predominant. Density functional calculations (B3LYP/6-311++G(d,p)) of the infrared spectra of all possible protonated isomers of each species showed that the observed IRMPD spectra are best fit to the isomer with the largest proton affinity and lowest relative electronic energy. Potential energy surfaces of the most stable isomers of [ACN+H]{sup +} and [DHP+H]{sup +} have been calculated for H and H{sub 2} loss. The lowest energy barriers are for loss of H{sub 2}, with predicted energies 4.28 and 4.15 eV, respectively. After H{sub 2} ejection, the adjacent aliphatic hydrogens migrate to the bare ejection site and stabilize the remaining fragment. Single H loss may occur from [ACN+H]{sup +} but the energy required is higher. No single H loss is predicted from [DHP+H]{sup +}, only H migration around the carbon skeleton. The vibrational bands in the parent closed-shell protonated polycyclic aromatic hydrocarbons are compared to bands observed from the interstellar medium.

74 ATOMIC AND MOLECULAR PHYSICS↗

Should regional ventilation function be considered during radiation treatment planning to prevent radiation-induced complications?

Purpose: To investigate the incorporation of pretherapy regional ventilation function in predicting radiation fibrosis (RF) in stage III nonsmall cell lung cancer (NSCLC) patients treated with concurrent thoracic chemoradiotherapy. Methods: Thirty-seven patients with stage III NSCLC were retrospectively studied. Patients received one cycle of cisplatin–gemcitabine, followed by two to three cycles of cisplatin–etoposide concurrently with involved-field thoracic radiotherapy (46–66 Gy; 2 Gy/fraction). Pretherapy regional ventilation images of the lung were derived from 4D computed tomography via a density change–based algorithm with mass correction. In addition to the conventional dose–volume metrics (V{sub 20}, V{sub 30}, V{sub 40}, and mean lung dose), dose–function metrics (fV{sub 20}, fV{sub 30}, fV{sub 40}, and functional mean lung dose) were generated by combining regional ventilation and radiation dose. A new class of metrics was derived and referred to as dose–subvolume metrics (sV{sub 20}, sV{sub 30}, sV{sub 40}, and subvolume mean lung dose); these were defined as the conventional dose–volume metrics computed on the functional lung. Area under the receiver operating characteristic curve (AUC) values and logistic regression analyses were used to evaluate these metrics in predicting hallmark characteristics of RF (lung consolidation, volume loss, and airway dilation). Results: AUC values for the dose–volume metrics in predicting lung consolidation, volume loss, and airway dilation were 0.65–0.69, 0.57–0.70, and 0.69–0.76, respectively. The respective ranges for dose–function metrics were 0.63–0.66, 0.61–0.71, and 0.72–0.80 and for dose–subvolume metrics were 0.50–0.65, 0.65–0.75, and 0.73–0.85. Using an AUC value = 0.70 as cutoff value suggested that at least one of each type of metrics (dose–volume, dose–function, dose–subvolume) was predictive for volume loss and airway dilation, whereas lung consolidation cannot be accurately predicted by any of the metrics. Logistic regression analyses showed that dose–function and dose–subvolume metrics were significant (P values ≤ 0.02) in predicting volume airway dilation. Likelihood ratio test showed that when combining dose–function and/or dose–subvolume metrics with dose–volume metrics, the achieved improvements of prediction accuracy on volume loss and airway dilation were significant (P values ≤ 0.04). Conclusions: The authors’ results demonstrated that the inclusion of regional ventilation function improved accuracy in predicting RF. In particular, dose–subvolume metrics provided a promising method for preventing radiation-induced pulmonary complications.

60 APPLIED LIFE SCIENCES↗

Enhancing Dissociative Adsorption of Water on Cu(111) via Chemisorbed Oxygen

We have used X-ray photoelectron spectroscopy to study the dehydrogenation of H 2 O molecules on the clean and oxygenated Cu(111) surfaces. The clean surface does not show reactivity toward H 2 O dehydrogenation. By contrast, H 2 O molecules on the oxygenated Cu(111) dissociate into OH species by reacting with chemisorbed oxygen until the complete consumption of the chemisorbed oxygen at which the surface loses its reactivity toward H 2 O dehydrogenation. Increasing the temperature to 200 °C and above decreases molecularly adsorbed H 2 O for dehydrogenation, thereby resulting in less loss of chemisorbed O. In conjunction with density-functional theory calculations, a three-step reaction pathway is proposed to account for the chemisorbed O assisted dehydrogenation of H 2 O molecules and the net loss of surface oxygen. Finally, these results provide insight into understanding the elemental steps of the dehydrogenation of H 2 O molecules and the controllable conditions for tuning H 2 O dissociation on metal surfaces.

36 MATERIALS SCIENCE↗