Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC CORES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

R-process Nucleosynthesis in Supernova Explosion

We investigate the possibility of the r-process during the magnetohydrodynamical (MHD) explosion of supernova in a massive star of 13 M{sub {center_dot}} with the effects of neutrinos included. Contrary to the case of the spherical explosion, jet-like explosion due to the combined effects of rotation and magnetic field lowers the electron fraction significantly inside the layers. We find that the ejected material of low electron fraction responsible for the r-process comes out from the inner deep region of the core that is made up of iron-group nuclei. This leads to the production of the second to third peak in the solar r-process elements. We suggest that there are some variations in the r-process nucleosynthesis according to the initial conditions of rotational and magnetic fields.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Thermal Analysis of a 50 kW Three-Phase Wireless Charging System

In this paper, the thermal analysis of a 50 kW three-phase wireless charging system (WCS) is presented. Addressing the thermal challenge is essential for designing a compact charging pad for 50 kW and higher-power WCS pads. Low thermal conductivity of the Litz wire and ferrite, and uneven distribution of the coil, and core loss cause the high temperature in the charging pads. In this paper, the loss distribution of a 50 kW three-phase WCS is investigated, and the temperature distribution is simulated using finite element analysis (FEA) considering the magnetic and non-magnetic materials of a charging pad. The thermal characteristics of an extremely high-power density 50 kW WCS prototype are tested experimentally for 10 minutes of operation. The simulation and experimental results show that the coil temperature increases to 65°C, the core temperature varies between 50°C to 150°C, and the packaging temperature increases to 65°C after 10 minutes of operation at rated 50 kW output power.

Mohammad, Mostak↗

Neutronics of Advanced-Fuel Fusion Experiments with DT Triggering

Nuclear fusion studies are currently devoted to the Deuterium-Tritium (DT) fuel cycle, the easiest way to reach ignition. The recent stress on safety by the world community has stimulated the research on other fuel cycles, based on advanced reactions, such as Deuterium-Helium-3 (DHe). With DHe, it is not necessary to breed and fuel tritium. The DHe cycle has a very low presence of energetic fusion neutrons, due to DD and DT side reactions, and it has the possibility to obtain electrical power by direct energy conversion of the protons produced by the fusion reactions. DHe fusion has its own set of problems, such as the availability of {sup 3}He and the attainment of the higher plasma parameters. To explore the possibilities of DHe plasmas, a burning plasma experiment at high magnetic field and high plasma densities is particularly attractive. Ignitor is a proposed compact high-magnetic field tokamak, aimed at studying plasma-burning conditions in Deuterium-Tritium plasmas. The Ignitor experiment is designed to reach ignition under controlled DT burning conditions. The machine parameters have been established, on the basis of existing knowledge of the confinement properties of high density plasmas. The scientific goal of the Ignitor experiment is to approach, for the first time, the ignition conditions of a magnetically confined D-T plasma. However, the plasma density limit in Ignitor being well above the optimal density for DT ignition, is potentially suitable to the higher densities required for DHe burning. In fact, Ignitor has been designed also to explore conditions where 14.7-MeV protons and 3.6-MeV alpha particles produced by the DHe reactions can supply a significant amount of thermal energy to a well-confined plasma. In particular, Ignitor can sustain plasma currents exceeding those required to confine proton orbits at birth, and has more than sufficiently high densities so that the slowing-down time of both the protons and the DT alpha particles is shorter than the electron energy replacement time of the thermal plasma in which they are produced. Preliminary analyses show that a fusion power PF around 2 MW, may be reached. As a start, Ignitor can perform initial studies at the level of approximately 1 MW of power in charged particles from the DHe reaction in a mostly DT plasma. CANDOR, a design evolution of Ignitor in the direction of a reactor using a DHe fuel cycle, has been proposed; it is a feasibility study of a high-field DHe experiment of larger dimensions and higher fusion power than Ignitor, however still based on the core Ignitor technologies. The main characteristics of the CANDOR machine are the following: the major radius Ro is about double than Ignitor, plasma currents up to 25 MA with toroidal magnetic fields B{sub T} = 13 T can be produced. Unlike Ignitor, CANDOR would operate with higher values of poloidal beta around unity and the central part of the plasma column in the Second Stability region. The characteristic times over which the plasma discharge can be sustained are longer by more than a factor of 4 than those of Ignitor. To produce such a strong magnetic field in a larger machine, the toroidal field coils have been divided into two sets of coils and the central solenoid (air core transformer) is placed between them in the inboard part. In CANDOR, the DHe burning regime can be reached, by a combination of ICRF heating and alpha particle heating due to DT fusion reactions, which take the role of a sort of trigger. Thanks to this fact, and unlike other proposed DHe fusion experiments, CANDOR is capable of reaching DHe ignition using the existing technologies, and present knowledge of plasma confinement phenomena. With the initial use of DT, where tritium comprises some 50% of an initial lower density DT plasma, but is not added thereafter, the need for an intense auxiliary heating, which is one of the main technological drawbacks of DHe ignition, would be considerably alleviated, becoming feasible with the present technology. However, this method has the disadvantage of using tritium and of presenting a higher neutron flux (due to DT reactions) than 'pure' DHe plasmas, generating a neutron flux transient when passing from the initial DT trigger reaction to the final DHe burning plasma. However, for an experimental machine one-of-a-kind of relatively small dimensions, this is not an issue. (authors)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Using Low-Field Nuclear Magnetic Resonance and X-Ray Computed Microtomography Imaging to Explore Potential of Microbially-Induced Calcium Carbonate Precipitation Treatment to Seal Shale Fractures

Microbially-induced calcium carbonate precipitation (MICP) is a biological process in which microbially produced urease enzymes convert urea and calcium into solid calcium carbonate (CaCO 3 ) deposits. Studies have shown that MICP can be used to seal fractures in shale, raising the possibility of applying this technology to restimulate fracking wells by plugging underperforming fractures. For this and other applications to become a reality, non-invasive tools are needed to determine how effectively MICP seals shale fractures under subsurface conditions. In this study, a 2.54 cm wide and 5.08 cm long Marcellus shale core with a single, ~1 mm wide fracture held open by sand "proppant" underwent MICP-treatment at 60°C until reaching three orders of magnitude permeability reduction. Low-field nuclear magnetic resonance (LF-NMR) and X-Ray computed microtomography (μ-CT) techniques were used to assess the extent of biomineralization within the fracture. These tools revealed that while CaCO 3 precipitation occurred throughout the fracture, there was preferential precipitation around proppant, and the core sealed at the effluent end before filling most of the fracture. Both tools were able to independently calculate of the amount of solid biomineral formed inside the fracture. Furthermore, this study found that the distribution of proppant within the shale fracture was an important parameter controlling the degree of biomineralization.

clastic rock↗

The hTERT core promoter forms three parallel G-quadruplexes

The structure of the 68 nt sequence with G-quadruplex forming potential within the hTERT promoter is disputed. One model features a structure with three stacked parallel G-quadruplex units, while another features an unusual duplex hairpin structure adjoined to two stacked parallel and antiparallel quadruplexes. We report here the results of an integrated structural biology study designed to distinguish between these possibilities. As part of our study, we designed a sequence with an optimized hairpin structure and show that its biophysical and biochemical properties are inconsistent with the structure formed by the hTERT wild-type sequence. By using circular dichroism, thermal denaturation, nuclear magnetic resonance spectroscopy, analytical ultracentrifugation, small-angle X-ray scattering, molecular dynamics simulations and a DNase I cleavage assay we found that the wild type hTERT core promoter folds into a stacked, three-parallel G-quadruplex structure. The hairpin structure is inconsistent with all of our experimental data obtained with the wild-type sequence. All-atom models for both structures were constructed using molecular dynamics simulations. These models accurately predicted the experimental hydrodynamic properties measured for each structure. We found with certainty that the wild-type hTERT promoter sequence does not form a hairpin structure in solution, but rather folds into a compact stacked three-G-quadruplex conformation.

59 BASIC BIOLOGICAL SCIENCES↗

Influence of lanthanides on spin-relaxation and spin-structure in a family of Fe 7 Ln 4 single molecule magnets

A family of isostructural undecanuclear 3d–4f coordination clusters of formula [Fe III 7 Ln III 4 O 4 (OH) 3 (tea) 2 (Htea) 3 (Piv) 7 (H 2 O) 2 (NO 3 ) 3 ], where Ln = Y (1), Gd (2), Tb (3), Dy (4); PivH ≡ pivalic acid and H 3 tea ≡ triethanolamine, was synthesised in this paper. The central Fe7 core of the coordination cluster can be described in terms of two {Fe 4 O 2 } butterfly motifs sharing a common body Fe atom. The two Fe 4 mean-planes subtend a dihedral angle of ca. 72°. The Tb (3) and Dy (4) compounds show Single Molecule Magnet (SMM) behaviour as confirmed by ac-susceptibility and μ-SQUID measurements. Furthermore, 57 Fe Mössbauer spectra of 1–4 confirm the presence of high-spin Fe III sites. The spectra of all complexes in the high temperature range (30–300 K) show broad overlapping doublets which were assigned to the body and wing-tip pairs of metal ions within the Fe 7 core. The low temperature Mössbauer spectra show dependence on the nature of the rare-earth metal as a result of its interaction with the iron sites. Finally, we observed a transition from fast (2), to intermediate (1) and very slow (frozen) (3, 4) spin fluctuation phenomena in these compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rigid Core Anthracene and Anthraquinone Linked Nitronyl and Iminoyl Nitroxide Biradicals

The first syntheses of bis(nitronyl nitroxide) and bis(iminoyl nitroxide) (diNN, diIN) biradicals linked through rigid acene core conjugating anthracene (A) and anthraquinone (AQ) units are reported. Computational modeling predicts weak intramolecular exchange in AQ-linked systems, but A-linked biradicals to have ground state multiplicities consistent with the Borden-Davidson disjointness model. Solution electron spin resonance spectra showed inter-radical exchange-coupled triplet states, except for 2,6-AQ biradicals showing isolated spin spectra. Crystallography of the A-linked biradicals shows a key role for inter-radical contacts for molecular packing. DiINs showed lower-dimensional dyad packing with disorder at the radical units: the conformationally more symmetrical diNNs gave staircase one-dimensional or brickwork two-dimensional lattices. Core anthracene unit stacking was only seen in two systems with bromine on the central anthracene ring: the (large) bromine occupies alternate side placement in dyad stacks for the diIN, chain stacks for the diNN. Magnetism of 2,7-A-linked systems showed predominant ferromagnetic intramolecular triplet-singlet splitting of 24–28 K for diNNs and 8 K for diINs, plus weak antiferromagnetic (AFM) interactions from intermolecular contacts. Furthermore, the 2,6-A-linked biradicals showed AFM exchange between spins. Both A and AQ cores offer possibilities for electronic material development, with a combination of multiple radical spins and π-electron-rich acene cores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic vortex in epitaxially-grown Co{sub 2}(Fe,Mn)Si alloy

We report magnetic vortex formation in epitaxially grown Co{sub 2}Fe{sub 0.4}Mn{sub 0.6}Si (CFMS) Heusler alloy discs that was confirmed using photoemission electron microscopy and the magneto-optical Kerr effect. The phase diagram of magnetic domain structures as functions of the disc thickness (t) and diameter (D) indicates that the magnetic vortex is stable in wide ranges of t and D even for the epitaxial CFMS. The annihilation field of vortex core depended not only on the disc aspect ratio but also on t. Numerical simulation suggests that this t dependence results from extrinsic pinning of a vortex core due to the epitaxial growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization of Embedded Sensors in Stainless Steel Test Articles and Design/Planning for MAGNET Testing

The nuclear industry is pursuing microreactors that can be factory assembled and deployed to remote regions for reliable power generation. One class of microreactors uses a monolithic metal core block coupled to heat pipes for heat rejection, which results in significant thermal stresses in the monolithic structures. This work describes the initial characterization and test plan for evaluating stainless steel test articles fabricated with embedded sensors for measuring heat pipe performance limits, as well as spatially distributed temperatures and strains during electrically heated thermal testing. The electrically heated testing will be performed in the non-nuclear Microreactor Agile Non-Nuclear Testbed and Single Primary Heat Extraction and Removal Emulator facilities located at Idaho National Laboratory. The goals of these tests are to (1) accurately monitor temperature and strain distributions that result from differential thermal expansion in the test articles and (2) quantify heat rejection limits of heat pipes as a function of operating temperature and working fluid during steady-state and transient operations. More generally, the ability to monitor component and system health during microreactor operation is attractive for providing a high sensor density to inform a limited number of microreactor operators to ultimately reduce operation and maintenance costs and move toward semi-autonomous operation. This report discusses the characterization of embedded thermocouples and fiber optic sensors in relevant test articles, including cylindrical pipes and hexagonal monolithic test articles for heat pipe-based reactors. The sensors were embedded by placing them in machined channels and then building up additional material by using ultrasonic additive manufacturing (UAM). UAM is a solid-state welding process that uses downward pressure and a lateral scrubbing motion to bond thin metal foils to a base material layer by layer. The ultrasonic welding process relies on the plastic deformation of the metal—as opposed to typical melting and solidification—to break oxide scales and bond the metal layers. The characterization of these embedded sensors included evaluating fiber optic signal attenuation, observing residual strain in the fibers, investigating microstructural and mechanical aspects, and demonstrating the sensors under various thermal loads and acoustic vibrations. Post-embedding characterization showed a fine grain structure (<1 μm) near the interfaces of the bonded foils as a result of severe deformation from the welding process. A large increase in hardness was observed at the foil interfaces and the fiber/matrix interface compared with the bulk matrix. Even when compared with the SS304 interfaces, the higher hardness observed around the embedded fiber suggests a higher degree of deformation due to the soft metal coating around the silica fiber core. The distributed fiber-optic temperature sensors and embedded thermocouples reliably measured temperature distributions during steady-state and transient thermal testing. The embedded fiber-optic sensors reliably measured strain during both transient and steady-state testing and properly identified resonant frequencies during acoustic testing.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A GRB Afterglow Model Consistent with Hypernova Observations

In this paper we describe the afterglows of the long gamma-ray-burst (GRB) 130427A within the context of a binary-driven hypernova. The afterglows originate from the interaction between a newly born neutron star ($ν$NS), created by an Ic supernova (SN), and a mildly relativistic ejecta of a hypernova (HN). Such an HN in turn results from the impact of the GRB on the original SN Ic. The mildly relativistic expansion velocity of the afterglow ($Γ ~ 3$) is determined, using our model-independent approach, from the thermal emission between 196 and 461 s. The power law in the optical and X-ray bands of the afterglow is shown to arise from the synchrotron emission of relativistic electrons in the expanding magnetized HN ejecta. Two components contribute to the injected energy: the kinetic energy of the mildly relativistic expanding HN and the rotational energy of the fast-rotating highly magnetized $ν$NS. We reproduce the afterglow in all wavelengths from the optical (10 14 Hz) to the X-ray band (10 19 Hz) over times from 604 s to 5.18 × 10 6 s relative to the Fermi-GBM trigger. Initially, the emission is dominated by the loss of kinetic energy of the HN component. After 10 5 s the emission is dominated by the loss of rotational energy of the $ν$NS, for which we adopt an initial rotation period of 2 ms and a dipole plus quadrupole magnetic field of $\lesssim$ 7 × 10 12 G or ~10 14 G. This scenario with a progenitor composed of a CO core and an NS companion differs from the traditional ultra-relativistic-jetted treatments of the afterglows originating from a single black hole.

79 ASTRONOMY AND ASTROPHYSICS↗

COMPLEX SCATTERED RADIATION FIELDS AND MULTIPLE MAGNETIC FIELDS IN THE PROTOSTELLAR CLUSTER IN NGC 2264

Near-infrared imaging polarimetry in the J, H, and K{sub s} bands has been carried out for the protostellar cluster region around NGC 2264 IRS 2 in the Monoceros OB1 molecular cloud. Various infrared reflection nebula clusters (IRNCs) associated with NGC 2264 IRS 2 and the IRAS 12 S1 core, as well as local infrared reflection nebulae (IRNe), were detected. The illuminating sources of the IRNe were identified with known or new near- and mid-infrared sources. In addition, 314 point-like sources were detected in all three bands and their aperture polarimetry was studied. Using a color-color diagram, reddened field stars and diskless pre-main-sequence stars were selected to trace the magnetic field (MF) structure of the molecular cloud. The mean polarization position angle of the point-like sources is 81 Degree-Sign {+-} 29 Degree-Sign in the cluster core, and 58 Degree-Sign {+-} 24 Degree-Sign in the perimeter of the cluster core, which is interpreted as the projected direction on the sky of the MF in the observed region of the cloud. The Chandrasekhar-Fermi method gives a rough estimate of the MF strength to be about 100 {mu}G. A comparison with recent numerical simulations of the cluster formation implies that the cloud dynamics is controlled by the relatively strong MF. The local MF direction is well associated with that of CO outflow for IRAS 12 S1 and consistent with that inferred from submillimeter polarimetry. In contrast, the local MF direction runs roughly perpendicular to the Galactic MF direction.

79 ASTRONOMY AND ASTROPHYSICS↗

Deduction of the chemical state and the electronic structure of Nd{sub 2}Fe{sub 14}B compound from X-ray photoelectron spectroscopy core-level and valence-band spectra

Characterization of chemical state and electronic structure of the technologically important Nd{sub 2}Fe{sub 14}B compound is attractive for understanding the physical nature of its excellent magnetic properties. X-ray photoelectron spectroscopy (XPS) study of such rare-earth compound is important and also challenging due to the easy oxidation of surface and small photoelectron cross-sections of rare-earth 4f electrons and B 2p electrons, etc. Here, we reported an investigation based on XPS spectra of Nd{sub 2}Fe{sub 14}B compound as a function of Ar ion sputtering time. The chemical state of Fe and that of B in Nd{sub 2}Fe{sub 14}B compound can be clearly determined to be 0 and −3, respectively. The Nd in Nd{sub 2}Fe{sub 14}B compound is found to have the chemical state of close to +3 instead of +3 as compared with the Nd in Nd{sub 2}O{sub 3}. In addition, by comparing the valence-band spectrum of Nd{sub 2}Fe{sub 14}B compound to that of the pure Fe, the contributions from Nd, Fe, and B to the valence-band structure of Nd{sub 2}Fe{sub 14}B compound is made more clear. The B 2p states and B 2s states are identified to be at ∼11.2 eV and ∼24.6 eV, respectively, which is reported for the first time. The contribution from Nd 4f states can be identified both in XPS core-level spectrum and XPS valence-band spectrum. Although Nd 4f states partially hybridize with Fe 3d states, Nd 4f states are mainly localized in Nd{sub 2}Fe{sub 14}B compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

EVIDENCE FOR TWO SEPARATE BUT INTERLACED COMPONENTS OF THE CHROMOSPHERIC MAGNETIC FIELD

Chromospheric fibrils are generally thought to trace out low-lying, mainly horizontal magnetic fields that fan out from flux concentrations in the photosphere. A high-resolution ({approx}0.''1 pixel{sup -1}) image, taken in the core of the Ca II 854.2 nm line and covering an unusually large area, shows the dark fibrils within an active region remnant as fine, looplike features that are aligned parallel to each other and have lengths comparable to a supergranular diameter. Comparison with simultaneous line-of-sight magnetograms confirms that the fibrils are centered above intranetwork areas (supergranular cell interiors), with one end rooted just inside the neighboring plage or strong unipolar network but the other endpoint less clearly defined. Focusing on a particular arcade-like structure lying entirely on one side of a filament channel (large-scale polarity inversion), we find that the total amount of positive-polarity flux underlying this 'fibril arcade' is {approx}50 times greater than the total amount of negative-polarity flux. Thus, if the fibrils represent closed loops, they must consist of very weak fields (in terms of total magnetic flux), which are interpenetrated by a more vertical field that contains most of the flux. This surprising result suggests that the fibrils in unipolar regions connect the network to the nearby intranetwork flux, while the bulk of the network flux links to remote regions of the opposite polarity, forming a second, higher canopy above the fibril canopy. The chromospheric field near the edge of the network thus has an interlaced structure resembling that in sunspot penumbrae.

79 ASTRONOMY AND ASTROPHYSICS↗

Detachment stabilization with n/m=1/1 resonant magnetic perturbation field applied to the stochastic magnetic boundary of the Large Helical Device

It is found that the remnant island structure created by n/m=1/1 resonant magnetic perturbation field in the stochastic magnetic boundary of the Large Helical Device (LHD) [A. Komori et al., Nucl. Fusion 49, 104015 (2009)] has a stabilizing effect on formation of radiating plasma, realizing stably sustained divertor detachment operation with the core plasma being unaffected. The data from the several diagnostics, (profiles of electron temperature and density, radiation and temporal evolution of divertor particle flux) indicate selective cooling around X-point of the island and thus peaked radiation there, which is stabilized outside of the last closed flux surface throughout the detachment phase. The vacuum ultraviolet spectroscopy measurements of high Z impurity (iron) emission shows significant decrease during the detachment, indicating core plasma decontamination. The results from the three-dimensional (3D) edge transport code, edge Monte Carlo 3D (EMC3) [Y. Feng et al., Contrib. Plasma Phys. 44, 57 (2004)]-EIRENE [D. Reiter et al., Fusion Sci. Technol. 47, 172 (2005)] show similar tendency in the radiation pattern. The island size and its radial location are varied to investigate the magnetic topology effects on the detachment control. The divertor particle flux and neutral pressure exhibit intermittent oscillation as well as modification of recycling pattern during the detachment, which are found to reflect the island structure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MODELING MAGNETIC FIELD STRUCTURE OF A SOLAR ACTIVE REGION CORONA USING NONLINEAR FORCE-FREE FIELDS IN SPHERICAL GEOMETRY

We test a nonlinear force-free field (NLFFF) optimization code in spherical geometry using an analytical solution from Low and Lou. Several tests are run, ranging from idealized cases where exact vector field data are provided on all boundaries, to cases where noisy vector data are provided on only the lower boundary (approximating the solar problem). Analytical tests also show that the NLFFF code in the spherical geometry performs better than that in the Cartesian one when the field of view of the bottom boundary is large, say, 20 Degree-Sign Multiplication-Sign 20 Degree-Sign . Additionally, we apply the NLFFF model to an active region observed by the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory (SDO) both before and after an M8.7 flare. For each observation time, we initialize the models using potential field source surface (PFSS) extrapolations based on either a synoptic chart or a flux-dispersal model, and compare the resulting NLFFF models. The results show that NLFFF extrapolations using the flux-dispersal model as the boundary condition have slightly lower, therefore better, force-free, and divergence-free metrics, and contain larger free magnetic energy. By comparing the extrapolated magnetic field lines with the extreme ultraviolet (EUV) observations by the Atmospheric Imaging Assembly on board SDO, we find that the NLFFF performs better than the PFSS not only for the core field of the flare productive region, but also for large EUV loops higher than 50 Mm.

79 ASTRONOMY AND ASTROPHYSICS↗

Evidence of electron heating at different radial locations on Proto-MPEX

This paper reports on the observation of controlled underdense electron heating for high heat flux applications in the Prototype Material Plasma Exposure eXperiment. The goal of this experiment is to demonstrate the source and heating concepts to create a high intensity plasma at material targets to study plasma-material interactions in similar plasma conditions to magnetic fusion divertors. A 80 kW helicon source at 13.56 MHz is used for the plasma density production and a 15 kW microwave source at 28 GHz is used for electron heating. Moreover, for electron densities ~5 × 10 18 m -3 , the electron temperature at the target location increases from 2 eV to 5 eV and the core heat flux increases by a factor of 5. It is shown that the radial profile of the heat flux delivered at the target can be controlled by either the background plasma density or the magnetic field. In conclustion, analysis suggests that the electron heating is due to heating near the upper-hybrid resonance layer and that this heating scenario may scale up to divertor-relevant electron densities ~5 × 10 19 m -3 by increasing the microwave driving frequency to 105 GHz.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma response measurements of non-axisymmetric magnetic perturbations on DIII-D via soft x-ray imaging

Recent observations on DIII-D have advanced the understanding of plasma response to applied resonant magnetic perturbations (RMPs) in both H-mode and L-mode plasmas. Three distinct 3D features localized in minor radius are imaged via filtered soft x-ray emission: (i) the formation of lobes extending from the unperturbed separatrix in the X-point region at the plasma boundary, (ii) helical kink-like perturbations in the steep-gradient region inside the separatrix, and (iii) amplified islands in the core of a low-rotation L-mode plasma. In this study, these measurements are used to test and to validate plasma response models, which are crucial for providing predictive capability of edge-localized mode control. In particular, vacuum and two-fluid resistive magnetohydrodynamic(MHD) responses are tested in the regions of these measurements. At the plasma boundary in H-mode discharges with n = 3 RMPs applied, measurements compare well to vacuum-field calculations that predict lobe structures. Yet in the steep-gradient region, measurements agree better with calculations from the linear resistive two-fluid MHD code, M3D-C1. Relative to the vacuum fields, the resistive two-fluid MHD calculations show a reduction in the pitch-resonant components of the normal magnetic field (screening), and amplification of non-resonant components associated with ideal kink modes. However, the calculations still over-predict the amplitude of the measuredperturbation by a factor of 4. In a slowly rotating L-mode plasma with n = 1 RMPs, core islands are observed amplified from vacuum predictions. Finally, these results indicate that while the vacuum approach describes measurements in the edge region well, it is important to include effects of extended MHD in the pedestal and deeper in the plasma core.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scattering of radio frequency waves by cylindrical filaments with general orientation relative to the magnetic field

Radio frequency waves are routinely used in tokamak fusion plasmas for plasma heating, current control, as well as in diagnostics. These waves are excited by antenna structures placed near the tokamak's wall and they have to propagate through a turbulent layer known as scrape-off layer, before reaching the core plasma (which is their target). This layer exhibits coherent density fluctuations in the form of filaments and blobs. The scattering processes of RF plane waves by single filament is studied with the assumption that the filament has cylindrical shape and infinite length. Furthermore, besides the major toroidal component of the externally imposed magnetic field, there is also a small poloidal magnetic field component. Considering also that the cylindrical filament's axis is not necessarily aligned with the toroidal direction, the total magnetic field is in general neither aligned with the axis of the cylinder nor with the toroidal direction. The investigation concerns the case of Electron Cyclotron (EC) waves (of frequency 170 GHz) for tokamak applications. The study covers a variety of density contrasts between the filament and the ambient plasma, different magnetic field inclinations with respect to the cylinder axis (for the same magnitude of magnetic induction B=4.5 T) and a wide range of filament radii.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗