Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA SIMULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Measurement and simulation of jet mass caused by a high-aspect ratio hole perturbation

Inertial confinement fusion (ICF) capsule performance can be negatively impacted by the presence of hydrodynamic instabilities. To perform a gas fill on an ICF capsule, current plans involve drilling a small hole and inserting a fill tube to inject the gas mixture into the capsule. This introduces a perturbation on the capsule, which can seed hydrodynamic instabilities. The small hole can cause jetting of the shell material into the gas, which might adversely affect the capsule performance. We have performed simulations and experiments to study the hydrodynamic evolution of jets from high-aspect ratio holes, such as the fill tube hole. Although simulations using cold materials overpredict the amount of mass in the jet, when a plausible amount of preheat (<1 eV) is introduced, the simulations are in better agreement with the experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron dynamics in two-dimensional asymmetric anti-parallel reconnection

Kinetic simulations and spacecraft observations have documented strong anisotropy in the electron distribution function during magnetic reconnection. The level and role of electron pressure anisotropy is investigated for asymmetric geometries applicable to reconnection in the day-side magnetopause. A previously derived analytic model for the pressure anisotropy is generalized and is applied to the asymmetric geometry. In agreement with the results from a kinetic simulation, the generalized model predicts the strongest pressure anisotropy and parallel electric fields in the in-flow region characterized by low electron pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impurity transport in trapped electron mode driven turbulence

Trapped electron mode turbulence is studied by gyrokinetic simulations with the GYRO code and an analytical model including the effect of a poloidally varying electrostatic potential. Its impact on radial transport of high-Z trace impurities close to the core is thoroughly investigated, and the dependence of the zero-flux impurity density gradient (peaking factor) on local plasma parameters is presented. Parameters such as ion-to-electron temperature ratio, electron temperature gradient, and main species density gradient mainly affect the impurity peaking through their impact on mode characteristics. The poloidal asymmetry, the safety factor, and magnetic shear have the strongest effect on impurity peaking, and it is shown that under certain scenarios where trapped electron modes are dominant, core accumulation of high-Z impurities can be avoided. We demonstrate that accounting for the momentum conservation property of the impurity-impurity collision operator can be important for an accurate evaluation of the impurity peaking factor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrical and optical properties of warm dense beryllium along the principal Hugoniot

The electrical and optical properties of warm dense beryllium along the principal Hugoniot for temperatures from 0.95 eV to 10.65 eV and densities from 3.8 to 6.0 g/cm{sup 3} are investigated by using quantum molecular dynamics (QMD) simulations combined with the Kubo-Greenwood formulation. The dc conductivity σ{sub dc} and the ionization fraction are yielded by fitting the optical conductivity with the Drude-Smith model. The first-principles transport coefficients are compared with results of the Lee-More model and the Brysk model [Plasma Phys. 17, 473 (1975)]. Compared with the QMD result, the Lee-More model underestimates σ{sub dc} by 87% at low temperatures, approaches the QMD result gradually with the temperature rising, yet still underestimates σ{sub dc} by 49% corresponding to the temperature 10.65 eV. In the whole temperature range under investigation, the Brysk model overestimates the electronic thermal conductivity κ while the Lee-More model underestimates κ. The differences are reduced with the temperature increasing. At the temperature 10.65 eV, the Brysk κ is still around twice as large as the QMD result, and the Lee-More κ is smaller than the QMD data by about 40%. In addition, QMD Rosseland mean opacities are shown to be three orders of magnitude larger than results of the average-atom model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quasisteady and steady states in global gyrokinetic particle-in-cell simulations

Collisionless delta-f gyrokinetic particle-in-cell simulations suffer from the entropy paradox, in which the entropy grows linearly in time while low-order moments are saturated. As a consequence, these simulations do not reach a steady state and are unsuited to make quantitative predictions. A solution to this issue is the introduction of artificial dissipation. The notion of steady state in gyrokinetic simulations is studied by deriving an evolution equation for the fluctuation entropy and applying it to the global collisionless particle-in-cell code ORB5 [S. Jolliet et al., Comput. Phys. Commun. 177, 409 (2007)]. It is shown that a recently implemented noise-control algorithm [B. F. McMillan et al., Phys. Plasmas 15, 052308 (2008)] based on a W-stat provides the necessary dissipation to reach a steady state. The two interesting situations of decaying and driven turbulence are considered. In addition, it is shown that a separate heating algorithm, not based on a W-stat, does not lead to a statistical steady state.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Controlled electron injection into laser wakefields with a perpendicular injection laser pulse

Electron injection into laser wakefields for acceleration by two orthogonally directed laser pulses is investigated theoretically. It is found that efficient injection occurs provided the two pulses are collinearly polarized, even if the injection pulse is much weaker than the pump pulse driving wakefields. Compared with the head-on colliding injection geometry, this scheme allows for a shorter propagation distance less than a Rayleigh length for the injection pulse, before its overlapping with the pump pulse. Moreover, it can generate electron beams stably with comparable low energy spread and emittance, as demonstrated by particle-in-cell simulations. The optimization of laser parameters is also investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Turbulence spreading effects on the ELM size and SOL width

BOUT++ turbulence simulations were performed to investigate the impact of turbulence spreading on the edge localized mode (ELM) size and divertor heat flux width (λ q ) broadening in small ELM regimes. Here, this study is motivated by EAST experiments. BOUT++ linear simulations of a pedestal radial electric field (E r ) scan show that the dominant toroidal number mode (n) shifts from high-n to low-n, with a narrow mode spectrum, and the maximum linear growth rate increases as the pedestal E r well deepens. The nonlinear simulations show that as the net E × B pedestal flow increases, the pressure fluctuation level and its inward penetration beyond the top of the pedestal both increase. This leads to a transition from small ELMs to large ELMs. Both inward and outward turbulence spreading are sensitive to the scrape-off-layer (SOL) plasma profiles. The inward turbulence spreading increases for the steep SOL profiles, leading to increasing pedestal energy loss in the small ELM regime. The SOL width (λ q ) is significantly broadened progressing from the ELM-free to small ELM regime, due to the onset of strong radial turbulent transport. The extent of the SOL width (λ q ) broadening depends strongly on outward turbulence spreading. The fluctuation energy intensity flux Γ ε at the separatrix can be enhanced by increasing either pedestal E r flow shear or local SOL pressure gradient. The λ q is broadened as the fluctuation energy intensity flux Γ ε at the last close flux surface (LCFS) increases. Local SOL E × B flow shear will restrain outward turbulence spreading and the associated heat flux width broadening. Operating in H-mode with small ELMs has the potential to solve two critical problems: reducing the ELM size and broadening the SOL width.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Research on pinching characteristics of electron beams emitted from different cathode surfaces of a rod-pinch diode

The particle-in-cell code UNIPIC is used to simulate the working process of a rod-pinch diode and investigate the pinching characteristics of electron beams emitted from different cathode surfaces. The simulation results indicate that the electron beam emitted from the upstream surface pinches better than from other surfaces when all the three surfaces emit electrons. The charge-density deposition on the anode surface peaks at the rod tip while the deposited charge density is approximately uniform over the first 15 mm of the rod before rapidly increasing over the last 3 mm, indicating a large axial extent of electron deposition. For the case of single-surface emission, the pinching quality of the electron beam emitted from the downstream surface is better than those from other surfaces. The charge-density deposition peaks at the rod tip and decreases rapidly off the tip. Based on the relationship of Larmor radius, beam's self-magnetic field, and the spatial current distribution, the above simulation results are analyzed theoretically. The experiments are performed on the inductive voltage adder to examine the simulations. By comparing the axial distribution of the radiation on the anode rod measured with the pinhole camera and the on-axis forward x-ray dose measured with the LiF thermoluminescent detectors, the simulation results are verified. The electron emission suppression method and the impedance change for each case are investigated or discussed in this paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A double-foil target for improving beam quality in laser ion acceleration with thin foils

A double-foil target is proposed for laser ion acceleration with thin targets to take advantage of high efficiency of such targets while avoiding beam degradation in late stage of acceleration. Laser heating of electrons co-moving with the ion beam is stopped by the second foil. It is found that the second foil can also modify and substantially improve the spectral and spatial properties of the ion beam and reduce the temperature of the co-moving electrons, leading to better preservation of the beam quality. Details of the dynamics are studied with particle-in-cell simulations.

43 PARTICLE ACCELERATORS↗

Invited Review Article: Gas puff imaging diagnostics of edge plasma turbulence in magnetic fusion devices

Gas puff imaging (GPI) is a diagnostic of plasma turbulence which uses a puff of neutral gas at the plasma edge to increase the local visible light emission for improved space-time resolution of plasma fluctuations. This paper reviews gas puff imaging diagnostics of edge plasma turbulence in magnetic fusion research, with a focus on the instrumentation, diagnostic cross-checks, and interpretation issues. The gas puff imaging hardware, optics, and detectors are described for about 10 GPI systems implemented over the past similar to 15 years. Comparison of GPI results with other edge turbulence diagnostic results is described, and many common features are observed. Here, several issues in the interpretation of GPI measurements are discussed, and potential improvements in hardware and modeling are suggested.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental quantification of the impact of heterogeneous mix on thermonuclear burn

In inertial confinement fusion, deuterium–tritium (DT) fuel is brought to densities and temperatures where fusion ignition occurs. However, mixing of the ablator material into the fuel may prevent ignition by diluting and cooling the fuel. MARBLE experiments at the National Ignition Facility provide new insight into how mixing affects thermonuclear burn. These experiments use laser-driven capsules containing deuterated plastic foam and tritium gas. Embedded within the foam are voids of known sizes and locations, which control the degree of heterogeneity of the fuel. Initially, the reactants are separated, with tritium concentrated in the voids and deuterium in the foam. During the implosion, mixing occurs between the foam and gas materials, leading to DT fusion reactions in the mixed region. Here, it is shown that by measuring the ratios of DT and deuterium–deuterium neutron yields for different macropore sizes and gas compositions, the effects of mix heterogeneity on thermonuclear burn may be quantified, supporting an improved understanding of these effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Existence of non-Landau solutions for Langmuir waves

The propagation of linear one dimensional (1D) Langmuir waves is reinvestigated using numerical simulations of a new type with very low noise. The dependence of the result on the initial conditions is shown. New solutions are exhibited, with properties different from Landau's, even in the asymptotic behavior, in particular with regard to the damping rate. These solutions are shown to demand a special preparation of the initial plasma perturbation, but in a way which is quite physical, without any singularity in the electron distribution function, contrary to the classical van Kampen's solutions. Using an original theoretical calculation, a simple analytical form is derived for the perturbed distribution function, which allows interpreting both the Landau and non-Landau solutions observed numerically. The numerical results presented and their interpretations are potentially important in several respects: 1) They outline that Landau solutions, for the 1D electrostatic problem in collisionless plasmas, are only a few among an infinite amount of others; even if the non-Landau solutions are much less probable, their existence provides a different view on the concept of kinetic damping and may suggest interpretations different from usual for the subsequent nonlinear effects; 2) they show that the shape of the initial perturbation {delta}f(v), and not only its amplitude, is important for the long time wave properties, both linear and nonlinear; 3) the existence of non-Landau solutions makes clear that the classical energy arguments cannot be fully universal as long as they allow deriving the Landau damping rate independently of the initial conditions; 4) the particle signature of Landau damping, different from the usual guess, should imply a change in our understanding of the role of the resonant particles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interaction of a thin shock with turbulence. I. Effect on shock structure: Analytic model

A two-dimensional magnetohydrodynamical model describing the interaction of thin shock waves with turbulence is developed by adopting a multiscale perturbation analysis. The interaction is found to be governed by a two-dimensional inviscid Burgers' equation that includes ''perturbation terms.'' Initially prescribed perturbation profiles are explored with numerical simulations to show how the shock front is modified by turbulence. Our numerical simulations show that magnetic field perturbations play a very important role in modifying the structure of perpendicular and parallel shocks. While turbulence can balance the nonlinear steepening of a shock wave at some regions, it can also help to create a larger jump in physical quantities such as the magnetic field at other regions. The plasma medium in these regions can therefore experience a higher compression, which will result in a downstream state that differs from the usual Rankine-Hugoniot state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Positive streamer formation in cathode region of pulsed high-pressure discharges for transversely excited atmosphere laser applications

A two-dimensional model of a high-pressure cathode region with nonuniform secondary electron emission has been used for conditions close to those used in pulsed discharge XeCl lasers. To simulate processes leading to a cathode spot formation, an inhomogeneity in the cathode electron emission was introduced by varying the electron emission in a 100 {mu}m-radius cathode surface region. The results obtained indicate that the inhomogeneous cathode emission can induce an instability in the cathode-faced surface of the bulk discharge plasma leading to the development of a cathode-directed streamer inside of the cathode region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reshocks, rarefactions, and the generalized Layzer model for hydrodynamic instabilities

We report numerical simulations and analytic modeling of shock tube experiments on Rayleigh-Taylor and Richtmyer-Meshkov instabilities. We examine single interfaces of the type A/B where the incident shock is initiated in A and the transmitted shock proceeds into B. Examples are He/air and air/He. In addition, we study finite-thickness or double-interface A/B/A configurations such as air/SF{sub 6}/air gas-curtain experiments. We first consider conventional shock tubes that have a 'fixed' boundary: A solid endwall which reflects the transmitted shock and reshocks the interface(s). Then we focus on new experiments with a 'free' boundary - a membrane disrupted mechanically or by the transmitted shock, sending back a rarefaction toward the interface(s). Complex acceleration histories are achieved, relevant for inertial confinement fusion implosions. We compare our simulation results with a generalized Layzer model for two fluids with time-dependent densities and derive a new freeze-out condition whereby accelerating and compressive forces cancel each other out. Except for the recently reported failures of the Layzer model, the generalized Layzer model and hydrocode simulations for reshocks and rarefactions agree well with each other and remain to be verified experimentally.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An upper bound to time-averaged space-charge limited diode currents

The Child-Langmuir law limits the steady-state current density across a one-dimensional planar diode. While it is known that the peak current density can surpass this limit when the boundary conditions vary in time, it remains an open question of whether the average current can violate the Child-Langmuir limit under time-dependent conditions. For the case where the applied voltage is constant but the electric field at the cathode is allowed to vary in time, one-dimensional particle-in-cell simulations suggest that such a violation is impossible. Although a formal proof is not given, an upper bound on the time-averaged current density is offered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Flux- and gradient-driven global gyrokinetic simulation of tokamak turbulence

The Eulerian gyrokinetic turbulence code gene has recently been extended to a full torus code. Moreover, it now provides Krook-type sources for gradient-driven simulations where the profiles are maintained on average as well as localized heat sources for a flux-driven type of operation. Careful verification studies and benchmarks are performed successfully. This setup is applied to address three related transport issues concerning nonlocal effects. First, it is confirmed that in gradient-driven simulations, the local limit can be reproduced--provided that finite aspect ratio effects in the geometry are treated carefully. In this context, it also becomes clear that the profile widths (not the device width) may constitute a more appropriate measure for finite-size effects. Second, the nature and role of heat flux avalanches are discussed in the framework of both local and global, flux- and gradient-driven simulations. Third, simulations dedicated to discharges with electron internal barriers are addressed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Integrated diagnostic analysis of inertial confinement fusion capsule performance

A conceptual model is developed for typical inertial confinement fusion implosion conditions that integrates available diagnostic information to determine the stagnation properties of the interior fill and surrounding shell. Assuming pressure equilibrium at peak compression and invoking radiative and equation-of-state relations, the pressure, density, and electron temperature are obtained by optimized fitting of the experimental output to smooth, global functional forms. Typical observational data that may be used includes x-ray self-emission, directional neutron time-of-flight signals, neutron yield, high-resolution x-ray spectra, and radiographic images. This approach has been validated by comparison with radiation-hydrodynamic simulations, producing semi-quantitative agreement. Model results implicate poor kinetic energy coupling to the hot core as the primary cause of the observed low thermonuclear burn yields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗