Search NASA⌕ Search

SEARCH · Search NASA

Results for “PRESSURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Spectroscopic Measurements of Radio Frequency Plasmas in Supercritical Fluids

Spectroscopic measurements of radio frequency (rf) plasma were performed under high pressure CO{sub 2} conditions (5 and 7 MPa) and supercritical (sc)CO{sub 2} conditions (8-20 MPa). The temperatures evaluated from C{sub 2} Swan bands increased from 3600 K to 4600 K with increasing pressure. The broadening and shifting of the O I line profile ({approx}777 nm) of rf plasma was observed under scCO{sub 2} conditions. The width of the line profile increased with increasing pressure. The reason for the broadening and shifting is still unclear because the present theory used to explain them is not valid for such high pressure conditions. Further, the broadening of the Ar I line profile ({approx}811.5 nm) in rf plasmas was observed under atmospheric Ar (0.1 MPa), high pressure Ar conditions (1-4 MPa), and scAr condition (5 MPa); the observation of the O I line profile in CO{sub 2} plasmas is difficult in this pressure range owing to its weak intensity therein. Similar to the case of the O I line in CO{sub 2} plasmas, the reason for the broadening of the Ar I line profile at 5 MPa is unclear.

74 ATOMIC AND MOLECULAR PHYSICS↗

Density Functional Theory of Structural and Electronic Properties of III-N Semiconductors

In this wok, we present the density functional theory (DFT) calculations of cubic III-N based semiconductors by using the full potential linear augmented plane-wave method plus local orbitals as implemented in the WIEN2k code. Our aim is to predict the pressure effect on structural and electronic properties of III-N binaries and ternaries. Results are given for structural properties (e.g., lattice constant, elastic constants, bulk modulus, and its pressure derivative) and electronic properties (e.g., band structure, density of states, band gaps and band widths) of GaAs, GaN, AlN, and InN binaries and GaAsN ternaries. The proposed model uses GGA exchange-correlation potential to determine band gaps of semiconductors at {Gamma}, L and X high symmetry points of Brillouin zone. The results are found in good agreement with available experimental data for structural and electronic properties of these semiconductors.

36 MATERIALS SCIENCE↗

Structural and microscopic relaxations in glycerol: An inelastic x-ray scattering study

The THz dynamics of liquid glycerol has been probed by inelastic x-ray scattering at different pressure spanning the 0.66-3 Kbar range. A comparison with ultrasound absorption results available in literature leads us to identify the presence of two different relaxations, a structural (slow) relaxation and a microscopic (fast) one. Although the former has been already thoroughly studied in glycerol by lower frequency spectroscopic techniques, no hints on the latter are so far available in literature. We observe that the characteristic timescale of this fast relaxation ranges in the sub-picosecond, tends to decrease with increasing the wave-vector and seems rather insensitive to pressure changes. Finally, the timescale and strength of the fast relaxation have a direct link revealing the microscopic, single particle, nature of the involved process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Influence of High Pressure Thermal Behavior on Friction-induced material transfer During Dry Machining of Titanium

In this paper we study failure of coated carbide tools due to thermal loading. The study emphasizes the role assumed by the thermo-physical properties of the tool material in enhancing or preventing mass attrition of the cutting elements within the tool. It is shown that within a comprehensive view of the nature of conduction in the tool zone, thermal conduction is not solely affected by temperature. Rather it is a function of the so called thermodynamic forces. These are the stress, the strain, strain rate, rate of temperature rise, and the temperature gradient. Although that within such consideration description of thermal conduction is non-linear, it is beneficial to employ such a form because it facilitates a full mechanistic understanding of thermal activation of tool wear.

36 MATERIALS SCIENCE↗

Phase Transition and Elastic Properties of La-Compounds

The Phase transition and elastic properties of La-monochalcogenides have been investigated under pressure by means of a modified charge-transfer potential model which incorporates the Coulomb interaction modified by Coulomb screening due to the delocalization of electron of rare-earth atom leading to many-body interactions, covalency effect and overlap repulsion extended up to second-nearest neighbours. Under high pressure the coordination increases and they transform from rock-salt to CsCl structure. The calculated values of cohesive energy, lattice constant, phase transition pressure, relative volume collapse and harmonic elastic moduli their agree well with the available measured data and better than those computed by earlier workers. Present model is capable of explaining the Cauchy's discrepancy correctly.

36 MATERIALS SCIENCE↗

Pressure induced high spin-low spin transition in FeSe superconductor studied by x-ray emission spectroscopy and ab initio calculations

FeSe is a simple binary system in the iron based superconducting family and exhibits a significant pressure induced increase in the superconducting transition temperature (T{sub c}). In addition to pressure effect, spin fluctuations, magnetic ordering, and crystal structure all play vital roles in altering T{sub c}. Even though various experiments and theoretical simulations explain the connection among them and superconductivity, the interplay between these important parameters is still not clearly understood. Here, we report the pressure effect on the spin state of Fe in FeSe superconductor studied using synchrotron x-ray emission spectroscopy at ambient and low temperatures down to 8 K near T{sub c}. Pressure induced high spin to low spin transition was observed at both ambient and low temperatures with continuous suppression of Fe magnetic moments under increasing pressure. The spin transition is closely related to the pressure induced tetragonal to orthorhombic structural transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of high-pressure H{sub 2}O treatment on elimination of interfacial GeO{sub X} layer between ZrO{sub 2} and Ge stack

This investigation demonstrates the effect of high-pressure H{sub 2}O treatment on the elimination of the interfacial germanium suboxide (GeO{sub X}) layer between ZrO{sub 2} and Ge. The formation of GeO{sub X} interlayer increases the gate-leakage current and worsen the controllability of the gate during deposition or thermal cycles. X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy reveal that high-pressure H{sub 2}O treatment eliminates the interfacial GeO{sub X} layer. The physical mechanism involves the oxidation of non-oxidized Zr with H{sub 2}O and the reduction of GeO{sub X} by H{sub 2}. Treatment with H{sub 2}O reduces the gate-leakage current of a ZrO{sub 2}/Ge capacitor by a factor of 1000.

36 MATERIALS SCIENCE↗

Influence of surface defects in ZnO thin films on its biosensing response characteristic

Highly c-axis oriented zinc oxide (ZnO) thin films deposited by rf magnetron sputtering under varying processing pressure (20-50 mT) in a reactive gas mixture of argon and oxygen were studied for biosensing application. The as-deposited ZnO thin films were in a state of compressive stress having defects related to interstitial Zn and antisite oxygen. Glucose oxidase has been chosen as the model enzyme in the present study and was immobilized on the surface of ZnO thin films deposited on indium tin oxide coated Corning Glass substrate. The studies reveal a correlation between the biosensing characteristic and the presence of defects in the ZnO films. The ZnO films deposited under high pressure (50 mT) are found to be more sensitive for biosensing application due to availability of more surface area for effective immobilization of biomolecules and exhibits a suitable microenvironment with good electron transfer characteristic. The obtained results highlight the importance of desired microstate besides availability of suitable native defects in the ZnO thin film for exhibiting enhanced biosensing response.

36 MATERIALS SCIENCE↗

Negative ions: The overlooked species in thin film growth by pulsed laser deposition

Plasma plume species from a ceramic La{sub 0.4}Ca{sub 0.6}MnO{sub 3} target were studied by plasma mass spectrometry as a function of laser fluence, background gas, and deposition pressure to understand the interplay between plasma composition and oxide thin film growth by pulsed laser deposition. The plume composition reveals a significant contribution of up to 24% of negative ions, most notably using a N{sub 2}O background. The significance of negative ions for thin film growth is shown for La{sub 0.4}Ca{sub 0.6}MnO{sub 3} films grown in different background conditions where the best structural properties coincide with the largest amount of negative plasma species.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Synthesis of submicron metastable phase of silicon using femtosecond laser-driven shock wave

We measured the grain size of metastable phase of Si synthesized by shock compression. We analyzed the crystalline structures of the femtosecond laser-driven shock compressed silicon with x-ray diffraction measurements. We found that submicron grains of metastable Si-VIII exist in the silicon. We suggest that the pressure loading time is too short for the nucleated high-pressure phases to grow in case of the femtosecond laser-driven shock compression, therefore Si-VIII grains of submicron size are obtained. We are expecting to discover other unique crystalline structures induced by the femtosecond laser-driven shock wave.

36 MATERIALS SCIENCE↗

Pressure-induced changes in the dielectric response of polymer relaxors

The effect of hydrostatic pressure on the dielectric response of P(VDF/TrFE)(50/50) irradiated with fast electrons has been studied. A non-linear upward shift of the glass transition temperature T{sub g} and the Curie temperature T{sub C} of the polymer relaxors was observed under pressure with the initial slope dT{sub g}/dp being considerably smaller than dT{sub C}/dp. Moreover, pressure was found to reduce the contribution to the low-frequency dielectric absorption originating from segmental motions in the amorphous phase whereas the contribution related to ferroelectric-paraelectric transition and that of polar nanoclusters in the crystalline phase were found to be enhanced.

36 MATERIALS SCIENCE↗

NO-assisted molecular-beam epitaxial growth of nitrogen substituted EuO

We have investigated a method for substituting oxygen with nitrogen in EuO thin films, which is based on molecular beam epitaxy distillation with NO gas as the oxidizer. By varying the NO gas pressure, we produce crystalline, epitaxial EuO{sub 1-x}N{sub x} films with good control over the films' nitrogen concentration. In situ x-ray photoemission spectroscopy reveals that nitrogen substitution is connected to the formation Eu{sup 3+}4f{sup 6} and a corresponding decrease in the number of Eu{sup 2+}4f{sup 7}, indicating that nitrogen is being incorporated in its 3{sup -} oxidation state. While small amounts of Eu{sup 3+} in over-oxidized Eu{sub 1-{delta}}O thin films lead to a drastic suppression of the ferromagnetism, the formation of Eu{sup 3+} in EuO{sub 1-x}N{sub x} still allows the ferromagnetic phase to exist with an unaffected T{sub c}, thus providing an ideal model system to study the interplay between the magnetic f{sup 7} (J = 7/2) and the non-magnetic f{sup 6} (J = 0) states close to the Fermi level.

36 MATERIALS SCIENCE↗

Structural and morphological properties of sputtered NiO thin films at various sputtering pressures

Nickel oxide thin films were successfully deposited on glass substrates at different sputtering pressures in the range of 3 x 10{sup -2} to 5 x 10{sup -2} mbar. It was observed that sputtering pressure influenced the structural and morphological properties. Structural properties were studied with X-ray diffractometer. All the deposited films were polycrystalline and exhibited cubic structure with preferential growth along (220) plane. From morphological studies it was observed that fine and uniform grains with RMS roughness of 9.4 nm were obtained when the films deposited at a sputtering pressure of 4 x 10{sup -2} mbar,. The grain size and the surface roughness decreased at higher sputtering pressures. The surface mobility of the adatoms decreased after series of collisions resulting in the decrease of grain size at high sputtering pressures.

36 MATERIALS SCIENCE↗

Tendency of spherically imploding plasma liners formed by merging plasma jets to evolve toward spherical symmetry

We have performed three-dimensional (3D) simulations using smoothed particle hydrodynamics (SPH) in order to study the effects of discrete plasma jets on the processes of plasma liner formation, implosion on vacuum, and expansion. It was found that the pressure histories of the inner portion of the liner from 3D SPH simulations with a uniform liner and with 30 discrete plasma jets were qualitatively and quantitatively similar from peak compression through the complete stagnation of the liner. The 3D simulations with a uniform liner were first benchmarked against results from one-dimensional radiation-hydrodynamic simulations [T. J. Awe et al., Phys. Plasmas 18, 072705 (2011)]. Two-dimensional plots of the pressure field show that the discrete jet SPH case evolves towards a profile that is almost indistinguishable from the SPH case with a uniform liner, thus indicating that non-uniformities due to discrete jets are smeared out by late stages of the implosion. The processes of plasma liner formation and implosion on vacuum were shown to be robust against Rayleigh-Taylor instability growth. Finally, interparticle mixing for a liner imploding on vacuum was investigated. The mixing rate was found to be very small until after the peak compression for the 30 jet simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of heat and particle fluxes nonlocality on spatial distribution of plasma density in two-chamber inductively coupled plasma sources

This study presents 2D simulations of the two-chamber inductively coupled plasma source where power is supplied in the small discharge chamber and extends by electron thermal conductivity mechanism to the big diffusion chamber. Depending on pressure, two main scenarios of plasma density and its spatial distribution behavior were identified. One case is characterized by the localization of plasma in the small driver chamber where power is deposed. Another case describes when the diffusion chamber becomes the main source of plasma with maximum of the electron density. The differences in spatial distribution are caused by local or non-local behavior of electron energy transport in the discharge volume due to different characteristic scale of heat transfer with electronic conductivity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transition of RF internal antenna plasma by gas control

The transition between the capacitively coupled plasma (CCP) and the inductively coupled plasma (ICP) was investigated with the internal radio frequency (RF) multi-turn antenna. The transition between them showed the hysteresis curve. The radiation power and the period of the self-pulse mode became small in proportion to the gas pressure. It was found that the ICP transition occurred by decreasing the gas pressure from 400 Pa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Oxygen partial pressure influenced structural and optical properties of DC magnetron sputtered ZrO{sub 2} films

Thin films of zirconium oxide (ZrO{sub 2}) were deposited on (100) p-silicon and quartz substrates by sputtering of metallic zirconium target under different oxygen partial pressures in the range 8 Multiplication-Sign 10{sup -3}-6 Multiplication-Sign 10{sup -2}Pa. The effect of oxygen partial pressure on the structural and optical properties of the deposited films was systematically investigated. The deposition rate of the films decreased from 3.3 to 1.83 nm/min with the increase of oxygen partial pressure from 8 Multiplication-Sign 10{sup -3}-6 Multiplication-Sign 10{sup -2}Pa respectively. The X-ray diffraction profiles revealed that the films exhibit (111) refection of zirconium oxide in monoclinic phase. The optical band gap of the films increased from 5.62 to 5.80 eV and refractive index increased from 2.01 to 2.08 with the increase of oxygen partial pressure from 8 Multiplication-Sign 10{sup -3}-6 Multiplication-Sign 10{sup -2}Pa respectively.

36 MATERIALS SCIENCE↗