Thermo mechanical analysis of fully ceramic microencapsulated fuel during in-pile operation
A proposed fuel for improved performance in LWRs (Light Water Reactors) is FCM (fully encapsulated micro-ceramic) fuel concept that involves TRISO (Tri-structural-Isotropic) fuel particles embedded in a NITE (Nano Infiltrated Eutectic) silicon carbide matrix. TRISO fuel particles contain a spherical fuel kernel that will likely range from about 500 to in excess of 800 μm in diameter. The kernel and buffer layer are then typically coated with 3 isotropic layers consisting of a dense inner pyrolytic carbon (IPyC), a silicon carbide (SiC) layer, and an outer layer of dense, pyrolytic carbon (OPyC). These layers are typically around 40 μm thick, but can range from 20 to 60 μm. The TRISO particle packing fraction in the NITE-SiC matrix is expected to be 40-45 vol.%. The release of radioactivity into the coolant is dependent on the integrity of the silicon carbide layer of the TRISO particles and the NITE-SiC matrix. BISON, a code under development by Idaho National Laboratory, has been built on the Multi-physics Object Oriented Simulation Environment (MOOSE). MOOSE is a massively parallel, finite element computational system that uses a Jacobian-free, Newton-Krylov (JFNK) method to solve coupled systems and non-linear partial differential equations. A single particle comparison to fuel performance codes such as PARFUME was conducted and demonstrated that BISON is able to simulate the required physics. FCM pellets embedded with homogenous particles were simulated. It was found that the interior matrix temperature was predicted to be considerably lower than for an equivalent UO{sub 2} pellet. The swelling dependence on temperature created a compressive region around the perimeter of the pellet. However, at fluences above 6.10{sup 25} neutrons/m{sup 2}, the swelling of the pyrolytic carbon might cause significant tensile stresses and possible cracks near the surface of the pellet. This suggests that the pyrolytic carbon swelling may be an important factor in the lifetime of this fuel type.