Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRESS CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Bidentate Lewis Base Ligand-Mediated Surface Stabilization and Modulation of the Electronic Structure of CsPbBr 3 Perovskite Nanocrystals

The desorption of conventional ligands from the surface of halide perovskite nanocrystals (NCs) often causes their structural instability and the deterioration of the optoelectronic properties. To address this challenge, we present an approach of using a bidentate Lewis base ligand, namely, 1,4-bis(diphenylphosphino)butane (DBPP), for the synthesis of CsPbBr 3 NCs. The phosphine group of DBPP has a strong interaction with PbBr 2 precursor, forming a highly crystalline intermediate complex during the reaction. In the presence of oleic acid, the uncoordinated phosphine group of DBPP is converted into the phosphonium cation, which strongly binds with the surface bromide of the formed CsPbBr 3 NCs through hydrogen bonding. Density functional theory calculations suggest that DBPP can strongly bind to the undercoordinated lead and surface bromide ions of CsPbBr 3 NCs through its unprotonated and protonated phosphine groups, respectively. The robust binding of DBPP with the surface of perovskite NCs helps to preserve their structural integrity under various environmental stresses. Moreover, the electron density and energy levels are regulated in DBPP-capped CsPbBr 3 NCs via the efficient transfer of electrons from the ligands to the NCs, resulting in their improved photocatalytic CO 2 reduction performance. Furthermore, our study highlights the potential of using bidentate ligands to stabilize the surface of perovskite NCs and modulate their optical and electronic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab Initio Study of the Polarization, Electronic, Magnetic, and Optical Properties of Perovskite SrMO{sub 3} (M = Fe, Mn) Crystals and Thin Films Containing Magnetic Ions

The magnetic, electronic, and polarization properties of the SrFeO{sub 3} and SrMnO{sub 3} compounds with a perovskite structure are calculated using the density functional theory in the bulk and thin-film states. A ferroelectric instability is found to be absent in the bulk state, and the polar mode is softened in the thin-film state of SrMnO{sub 3} in the presence of tensile stresses in the substrate. As a result, a polar phase with a polarization of 23 μC/cm{sup 2} appears, which agrees with experimental data. The study of the magnetic and electronic properties demonstrates the existence of G-type antiferromagnetic ordering in SrMnO{sub 3} and the appearance of a dielectric gap of about 1.5 eV in its thin film. A ferromagnetic phase with metallic conduction in both the bulk and thin-film states is detected in SrFeO{sub 3}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electroreflectance study of the effect of {gamma} radiation on the optical properties of epitaxial GaN films

Experimental data on the electroreflectance spectra of {gamma}-irradiated epitaxial GaN films on sapphire are reported. The irradiation doses are 10{sup 5}-2 Multiplication-Sign 10{sup 6} rad. The theoretical electroreflectance spectra calculated on the basis of a model of three types of transitions are in agreement with experimental data with reasonable accuracy. The energies and broadenings of the transitions derived in the context of the model give grounds to infer that, in the GaN films, there are internal stresses dependent on the {gamma}-irradiation dose.

36 MATERIALS SCIENCE↗

Dislocations and Plasticity in bcc Transition Metals at High Pressure

Using first-principles electronic structure calculations, quantum-based atomistic simulations and atomistically informed dislocation dynamics (DD) simulations, we have studied individual dislocation behavior and the multiscale modeling of single-crystal plasticity in the prototype bcc transition metals Ta, Mo and V under both ambient and high pressure conditions. The primary focus in this work is on the pressure-dependent structure, mobility and interaction of a/2<111> screw dislocations, which dominate the plastic deformation properties of these materials. At the electronic scale, first-principles calculations of elasticity, ideal strength and generalized stacking fault energy surfaces have been used to validate quantum-based multi-ion interatomic potentials. At the atomistic scale, these potentials have been used in flexible Green's function boundary condition simulations to study the core structure, Peierls stress {tau}{sub P}, thermally activated kink-pair formation and mobility below {tau}{sub P}, and phonon-drag mobility above {tau}{sub P}. These results have then been distilled into analytic velocity laws and used directly in predictive microscale DD simulations of flow stress and resolved yield stress over wide ranges of pressure, temperature and strain rate.

36 MATERIALS SCIENCE↗

Continuum stress intensity factors from atomistic fracture simulations

Stress intensity factors (SIFs) are utilized in continuum fracture mechanics to quantify the stress fields surrounding a crack in a homogeneous material in the linear elastic regime. Critical values of the SIFs define an intrinsic measure of the resistance of a material to propagate a crack. At atomic scales, yet, fracture occurs as a series of atomic bonds breaking, differing from the continuum description. As a consequence, a formal analog of the continuum SIFs calculated from atomistic simulations can have spatially localized, microstructural contributions that originate from varying bond configurations. The ability to characterize fracture at the atomic scale in terms of the SIFs offers both an opportunity to probe the effects of chemistry, as well as how the addition of a microstructural component affects the accuracy. We present a novel numerical method to determine SIFs from molecular dynamics (MD) simulations. The accuracy of this approach is first examined for a simple model, and then applied to atomistic simulations of fracture in amorphous silica. MD simulations provide time and spatially dependent SIFs, with results that are shown to be in good agreement with experimental values for fracture toughness in silica glass.

42 ENGINEERING↗

The effects of physical and chemical preprocessing on the flowability of corn stover

Continuous and reliable feeding of biomass is essential for successful biofuel production. However, the challenges associated with biomass solids handling are commonly overlooked. In this study, we examine the effects of preprocessing (particle size reduction, moisture content, chemical additives, etc.) on the flow properties of corn stover. Compressibility, flow properties (interparticle friction, cohesion, unconfined yield stress, etc.), and wall friction were examined for five corn stover samples: ground, milled (dry and wet), acid impregnated, and deacetylated. The ground corn stover was found to be the least compressible and most flowable material. The water and acid impregnated stovers had similar compressibilities. Yet, the wet corn stover was less flowable than the acid impregnated sample, which displayed a flow index equivalent to the dry, milled corn stover. The deacetylated stover, on the other hand, was the most compressible and least flowable examined material. However, all of the tested stover samples had internal friction angles >30°, which could present additional feeding and handling challenges. All of the ''wetted'' materials (water, acid, and deacetylated) displayed reduced flowabilities (excluding the acid impregnated sample), and enhanced compressibilities and wall friction angles, indicating the potential for added handling issues; which was corroborated via theoretical hopper design calculations. All of the ''wetted'' corn stovers require larger theoretical hopper outlet diameters and steeper hopper walls than the examined ''dry'' stovers.

09 BIOMASS FUELS↗

Flow and shear behavior in the edge and scrape-off layer of L-mode plasmas in National Spherical Torus Experiment

Fluctuations in the edge and scrape-off layer (SOL) of L-mode plasmas in the National Spherical Torus Experiment [Kaye et al., Phys. Plasmas 8, 1977 (2001)] as observed by the gas puff imaging (GPI) diagnostic are studied. Calculation of local, time resolved velocity maps using the hybrid optical flow and pattern matching velocimetry code enables analysis of turbulent flow and shear behavior. Periodic reversals in the direction of the poloidal flow near the separatrix are observed. Also, poloidal velocities and their radial shearing rate are found to be well correlated with the fraction of D{sub {alpha}} light contained in the SOL, which acts as a measure of turbulent bursts. The spectra of GPI intensity and poloidal velocity both have a strong feature near 3 kHz, which appears to correspond with turbulent bursts. This mode exhibits a poloidal structure with poloidal wavenumber of 7.7 m{sup -1} for GPI intensity and 3.4 m{sup -1} for poloidal velocity, and the poloidal velocity fluctuations near 3 kHz remain coherent over length scales in excess of the turbulent scales. Furthermore, recent SOL turbulence simulations find a parameter regime that exhibits periodic bursty transport and shares many qualitative similarities with the experimental data. Strong correlations between the shearing rate and the turbulent bursts are observed for time periods of {approx}2 ms, but the relationship is complicated by several factors. Finally, measurements of the radial profiles of the Reynolds shear stresses are reported. These radial profiles exhibit many similarities for several shots, and a region with positive radial gradient is seen to be coincident with local flow shear.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radiation from collapsing shells, semiclassical backreaction, and black hole formation

We provide a detailed analysis of quantum field theory around a collapsing shell and discuss several conceptual issues related to the emission of radiation flux and formation of black holes. Explicit calculations are performed using a model for a collapsing shell, which turns out to be analytically solvable. We use the insights gained in this model to draw reliable conclusions regarding more realistic models. We first show that any shell of mass M, which collapses to a radius close to r=2M, will emit approximately thermal radiation for a period of time. In particular, a shell that collapses from some initial radius to a final radius 2M(1-{epsilon}{sup 2}){sup -1} (where {epsilon}<<1) without forming a black hole, will emit thermal radiation during the period M < or approx. t < or approx. Mln(1/{epsilon}{sup 2}). Later on (t>>Mln(1/{epsilon}{sup 2})), the flux from such a shell will decay to zero exponentially. We next study the effect of backreaction computed using the vacuum expectation value of the stress tensor on the collapse. We find that, in any realistic collapse scenario, the backreaction effects do not prevent the formation of the event horizon. The time at which the event horizon is formed is, of course, delayed due to the radiated flux--which decreases the mass of the shell--but this effect is not sufficient to prevent horizon formation. We also clarify several conceptual issues and provide pedagogical details of the calculations in the Appendices to the paper.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantum modifications to gravity waves in de Sitter spacetime

We treat a model in which tensor perturbations of de Sitter spacetime, represented as a spatially flat model, are modified by the effects of the vacuum fluctuations of a massless conformally invariant field, such as the electromagnetic field. We use the semiclassical theory of gravity with the expectation value of the conformal field stress tensor as a source. We first study the stability of de Sitter spacetime by searching for growing, spatially homogeneous modes, and conclude that it is stable within the limits of validity of the semiclassical theory. We next examine the modification of linearized plane gravity waves by the effects of the quantum stress tensor. We find a correction term which is of the same form as the original wave, but displaced in phase by {pi}/2, and with an amplitude which depends upon an initial time. The magnitude of this effect is proportional to the change in scale factor after this time. We discuss alternative interpretations of this time, but pay particular attention to the view that this is the beginning of inflation. So long as the energy scale of inflation and the proper frequency of the mode at the beginning of inflation are well below the Planck scale, the fractional correction is small. However, modes which are trans-Planckian at the onset of inflation can undergo a significant correction. The increase in amplitude can potentially have observable consequences through a modification of the power spectrum of tensor perturbations in inflationary cosmology. This enhancement of the power spectrum depends upon the initial time, and is greater for shorter wavelengths.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the impact of temperatures up to 200°C in clay repositories with bentonite engineer barrier systems: A study with coupled thermal, hydrological, chemical, and mechanical modeling

One of the most important design variables for a geological nuclear waste repository is the temperature limit up to which the engineered barrier system (EBS) and the natural geologic environment can be exposed. Up to now, almost all design concepts that involve bentonite-backfilled emplacement tunnels have chosen a maximum allowable temperature of about 100°C. Such a choice is largely based on the consideration that in clay-based materials illitization and the associated mechanical changes in the bentonite (and perhaps the clay host rock) could affect the barrier attributes of the EBS. However, existing experimental and modeling studies on the occurrence of illitization and related performance impacts are not conclusive, in part because the relevant couplings between the thermal, hydrological, chemical, and mechanical (THMC) processes have not been fully represented in the models. This work presents a fully coupled THMC simulation of a nuclear waste repository in a clay formation with a bentonite-backfilled EBS for 1000 years. Two scenarios were simulated for comparison: a case in which the temperature in the bentonite near the waste canister can reach about 200°C and a case in which the temperature in the bentonite near the waste canister peaks at about 100°C. The model simulations demonstrate some degree of illitization in both the bentonite buffer and the surrounding clay formation. Other chemical alterations include the dissolution of K-feldspar and calcite, and precipitation of quartz, chlorite, and kaolinite. In general, illitization in the bentonite and the clay formation is enhanced at higher temperature. However, the quantity of illitization is affected by many chemical factors and therefore varies a great deal. The most important chemical factors are the concentration of K in the pore water as well as the abundance and dissolution rate of K-feldspar; less important ones are the concentration of sodium and the quartz precipitation rate. In our modeling scenarios, the calculated decrease in smectite volume fraction in bentonite ranges from 1 to 8% of the initial volume fraction of smectite in the 100°C scenario and 1–27% in the 200°C scenario. Chemical changes in the 200°C scenario could also lead to a reduction in swelling stress up to 15–18% whereas those in the 100°C scenario result in about 14–15% reduction in swelling stress for the base case scenario. Model results also show that the 200°C scenario results in a much higher total stress than the 100°C scenario, mostly due to thermal pressurization. While cautions should be taken regarding the model results due to some limitations in the models, the modeling work is illustrative in light of the relative importance of different processes occurring in EBS bentonite and clay formation at higher than 100°C conditions, and could be of greater use when site specific data are available.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Auxetic two-dimensional transition metal selenides and halides

Abstract Auxetic two-dimensional (2D) materials provide a promising platform for biomedicine, sensors, and many other applications at the nanoscale. In this work, utilizing a hypothesis-based data-driven approache, we identify multiple materials with remarkable in-plane auxetic behavior in a family of buckled monolayer 2D materials. These materials are transition metal selenides and transition metal halides with the stoichiometry MX (M = V, Cr, Mn, Fe, Co, Cu, Zn, Ag, and X = Se, Cl, Br, I). First-principles calculations reveal that the desirable auxetic behavior of these 2D compounds originates from the interplay between the buckled 2D structure and the weak metal–metal interaction determined by their electronic structures. We observe that the Poisson’s ratio is sensitive to magnetic order and the amount of uniaxial stress applied. A transition from positive Poisson’s ratio (PPR) to negative Poisson’s ratio (NPR) for a subgroup of MX compounds under large uniaxial stress is predicted. The work provides a guideline for the future design of 2D auxetic materials at the nanoscale.

2d materials↗

Longitudinal and Transverse Parton Momentum Distributions for Hadrons within Relativistic Constituent Quark Models

Longitudinal and transverse parton distributions for pion and nucleon are calculated from hadron vertexes obtained by a study of form factors within relativistic quark models. The relevance of the one-gluon-exchange dominance at short range for the behavior of the form factors at large momentum transfer and of the parton distributions at the end points is stressed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

EVALUATION OF U10MO FUEL PLATE IRRADIATION BEHAVIOR VIA NUMERICAL AND EXPERIMENTAL BENCHMARKING

This article analyzes dimensional changes due to irradiation of monolithic plate-type nuclear fuel and compares results with finite element analysis of the plates during fabrication and irradiation. Monolithic fuel plates tested in the Advanced Test Reactor (ATR) at Idaho National Lab (INL) are being used to benchmark proposed fuel performance for several high power research reactors. Post-irradiation metallographic images of plates sectioned at the midpoint were analyzed to determine dimensional changes of the fuel and the cladding response. A constitutive model of the fabrication process and irradiation behavior of the tested plates was developed using the general purpose commercial finite element analysis package, Abaqus. Using calculated burn-up profiles of irradiated plates to model the power distribution and including irradiation behaviors such as swelling and irradiation enhanced creep, model simulations allow analysis of plate parameters that are either impossible or infeasible in an experimental setting. The development and progression of fabrication induced stress concentrations at the plate edges was of primary interest, as these locations have a unique stress profile during irradiation. Additionally, comparison between 2D and 3D models was performed to optimize analysis methodology. In particular, the ability of 2D and 3D models account for out of plane stresses which result in 3-dimensional creep behavior that is a product of these components. Results show that assumptions made in 2D models for the out-of-plane stresses and strains cannot capture the 3-dimensional physics accurately and thus 2D approximations are not computationally accurate. Stress-strain fields are dependent on plate geometry and irradiation conditions, thus, if stress based criteria is used to predict plate behavior (as opposed to material impurities, fine micro-structural defects, or sharp power gradients), unique 3D finite element formulation for each plate is required.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Measurement of Interfacial Adhesion in Glass-Epoxy Systems Using the Indentation Method

The adhesion of coatings often controls the performance of the substrate-coating system. Certain engineering applications require an epoxy coating on a brittle substrate to protect and improve the performance of the substrate. Experimental observations and measurements of interfacial adhesion in glass-epoxy systems are described in this thesis. The Oliver and Pharr method was utilized to calculate the bulk epoxy hardness and elastic modulus. Spherical indentations were used to induce delaminations at the substrate-coating interface. The delamination sizes as a function of load were used to calculate the interfacial toughness. The interfacial fracture energy of my samples is an order of magnitude higher than a previous group who studied a similar glass-epoxy system. A comparison study of how different glass treatments affect adhesion was also conducted: smooth versus rough, clean versus dirty, stressed versus non-stressed.

36 MATERIALS SCIENCE↗

Pressure Build-Up During the Fire Test in Type B(U) Packages Containing Water - 13280

The safety assessment of packages for the transport of radioactive materials with content containing liquids requires special consideration. The main focus is on water as supplementary liquid content in Type B(U) packages. A typical content of a Type B(U) package is ion exchange resin, waste of a nuclear power plant, which is not dried, normally only drained. Besides the saturated ion exchange resin, a small amount of free water can be included in these contents. Compared to the safety assessment of packages with dry content, attention must be paid to some more specific issues. An overview of these issues is provided. The physical and chemical compatibility of the content itself and the content compatibility with the packages materials must be demonstrated for the assessment. Regarding the mechanical resistance the package has to withstand the forces resulting from the freezing liquid. The most interesting point, however, is the pressure build-up inside the package due to vaporization. This could for example be caused by radiolysis of the liquid and must be taken into account for the storage period. If the package is stressed by the total inner pressure, this pressure leads to mechanical loads to the package body, the lid and the lid bolts. Thus, the pressure is the driving force on the gasket system regarding the activity release and a possible loss of tightness. The total pressure in any calculation is the sum of partial pressures of different gases which can be caused by different effects. The pressure build-up inside the package caused by the regulatory thermal test (30 min at 800 deg. C), as part of the cumulative test scenario under accident conditions of transport is discussed primarily. To determine the pressure, the temperature distribution in the content must be calculated for the whole period from beginning of the thermal test until cooling-down. In this case, while calculating the temperature distribution, conduction and radiation as well as evaporation and condensation during the associated process of transport have to be considered. This paper discusses limiting amounts of water inside the cask which could lead to unacceptable pressure and takes into account saturated steam as well as overheated steam. However, the difficulties of assessing casks containing wet content will be discussed. From the authority assessment point of view, drying of the content could be an effective way to avoid the above described pressure build-up and the associated difficulties for the safety assessment. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Dominant Controls of Downdip Afterslip and Viscous Relaxation on the Postseismic Displacements Following the M w 7.9 Gorkha, Nepal, Earthquake

Here, we analyze three-dimensional GPS coordinate time series from continuously operating stations in Nepal and South Tibet and calculate the initial 1 year postseismic displacements. We first investigate models of poroelastic rebound, afterslip, and viscoelastic relaxation individually and then attempt to resolve the trade-offs between their contributions by evaluating the misfit between observed and simulated displacements. We compare kinematic inversions for distributed afterslip with stress-driven afterslip models. The modeling results show that no single mechanism satisfactorily explains near- and far-field postseismic deformation following the Gorkha earthquake. When considering contributions from all three mechanisms, we favor a combination of viscoelastic relaxation and afterslip alone, as poroelastic rebound always worsens the misfit. The combined model does not improve the data misfit significantly, but the inverted afterslip distribution is more physically plausible. The inverted afterslip favors slip within the brittle-ductile transition zone downdip of the coseismic rupture and fills the small gap between the mainshock and largest aftershock slip zone, releasing only 7% of the coseismic moment. Our preferred model also illuminates the laterally heterogeneous rheological structure between India and the South Tibet. The transient and steady state viscosities of the upper mantle beneath Tibet are constrained to be greater than 10 18 Pa s and 10 19 Pa s, whereas the Indian upper mantle has a high viscosity ≥10 20 Pa s. The viscosity in the lower crust of southern Tibet shows a clear trade-off with its southward extent and thickness, suggesting an upper bound value of ~8 × 10 19 Pa s for its steady state viscosity.

58 GEOSCIENCES↗

Influence of Ce{sup 3+} Ion Doping on Structural and Magnetic Properties of Magnesium Nanoferrite

Pure and rare earth ion Ce{sup 3+}-doped magnesium nanoferrite magnetic particles, i.e., MgFe{sub 2}O{sub 4} and MgCe{sub x}Fe{sub 2−x}O{sub 4} (x = 0.0, 0.025, 0.05, 0.075, and 0.1) were successfully fabricated using sol-gel technique, and qualitative studies were carried out using X-ray diffractometer (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), high-resolution field-emission scanning electron microscopy (HRFESEM) equipped with energy-dispersive spectroscopy (EDS), vibrating sample magnetometer (VSM), and electron paramagnetic resonance (EPR) techniques. X-ray diffraction analysis confirmed the crystalline phase of the synthesized samples with no extra phase. The crystallite size obtained from W-H plots follow the same trend as calculated using Scherrer method, and the strain decreases with increasing Ce{sup 3+} ion concentration indicating a lesser number of deformities. FTIR spectra revealed the shifting of lower-frequency band to the higher side with the larger radii Ce{sup 3+} ions. HRFESEM images reveal the reduction in stress on doping. No additional impurities are observed in synthesized samples as is confirmed by EDS analysis. The average particle size obtained by TEM are in agreement with XRD analysis. EPR studies showed an increase in g value and line width with doping. Magnetic measurements carried out at room temperature reveals the value of magnetization initially decreases up to x = 0.05 and afterwards increases with the addition of Ce{sup 3+} ions. These properties reveal superparamagnetic nature of cerium-doped magnesium nanoparticles and can be suitable for catalyst and humidity sensors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Variable density mixing in turbulent jets with coflow

Two sets of experiments are performed to study variable-density effects in turbulent round jets with co flow at density ratios, s = 4.2 and s = 1.2. 10,000 instantaneous realisations of simultaneous 2-D PIV and PLIF at three axial locations in the momentumdominated region of the jet allow us to calculate the full t.k.e. budgets, providing insights into the mechanisms of density fluctuation correlations both axially and radially in a non- Boussinesq flow. The strongest variable-density effects are observed within the velocity half-width of the jet, r ~u 1/2 . Variable density effects decrease the Reynolds stresses via increased turbulent mass flux in the heavy jet, as shown by previous jet centreline measurements. Radial pro les of turbulent flux show that in the lighter jet t.k.e. is moving away from the centreline, while in the heavy jet it is being transported both inwards towards the centreline and radially outwards. Negative t.k.e. production is observed in the heavy jet, and we demonstrate that this is caused by both reduced gradient stretching in the axial direction and increased turbulent mass fluxes. Large differences in advection are also observed between the two jets. The air jet has higher total advection caused by strong axial components, while density fluctuations in the heavy jet reduce the axial advection signi cantly. The budget mechanisms in the non-Boussinesq regime are best understood using effective density and velocity half-width, ρeff ¯u 3 1 ,CL/r ~u 1/2,eff , a modi cation of previous scaling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗