Search NASA⌕ Search

SEARCH · Search NASA

Results for “Stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Multifaceted effects of ring fusion on the stability of charged dialkoxyarene redoxmers

Due to their almost unlimited scalability, redox flow batteries can make versatile and affordable energy storage systems. Redox active materials (redoxmers) in these batteries largely define their electrochemical performance, including the life span of the battery that depends on the stability of charged redoxmers. Here, in this study, we examine the effects of expanding the pi-system in the arene rings on the chemical stability of dialkoxyarene redoxmers that are used to store positive charge in RFBs. When 1,4-dimethoxybenzene is pi-extended to 1,4 dimethoxynaphthalene, a lower redox potential, improved kinetic stability, and longer cycling life are observed. However, when an additional ring is fused to make 9,10-dimethoxyanthracene, the radical cation undergoes rapid O -dealkylation possibly due to increased steric strain that drives methoxy out of the arene plane thus breaking the pi-conjugation with O 2p orbitals. On the other hand, the planar structure of 1,4-dimethoxynaphthalene may facilitate second -order reactions of radical cations leading to their neutralization in the bulk. Our study suggests that extending the pi-system changes reactivity in multiple (sometimes, opposite) ways, so lowering the oxidation potential through pi-conjugation to improve redoxmer stability should be pursued with caution.

25 ENERGY STORAGE↗

Mechanistic origin of solvent-dependent thermal stability in sodiated Sn anodes for sodium-ion batteries

Understanding the thermal stability of high-energy density alloy anodes is critical for the safe deployment of sodium-ion batteries (SIBs). Here, accelerating rate calorimetry (ARC), post-mortem characterizations, and density functional theory (DFT) calculations are combined to understand the thermal reactivity of fully sodiated Sn, Sn-hard carbon (HC) blends, and HC anodes in carbonate- and ether-based electrolytes. ARC measurements show that propylene carbonate (PC) causes earlier self-heating rate (SHR) onset and higher reactivity than tetraethylene glycol dimethyl ether (TEGDME), indicating inferior thermal stability. Sodiated Sn exhibits better thermal stability than sodiated HC, while Sn-HC blends show intermediate behavior that improves with increasing Sn content. Post-ARC analyses reveal desodiation of Na15Sn4 to metallic Sn with particle coalescence, whereas Sn-HC blends and HC retain finer morphologies. PC promotes Sn oxidation to SnO, while TEGDME suppresses oxide formation; NaPF6-containing electrolytes additionally form NaF. DFT calculations show that PC adsorption lowers Na extraction energy and enhances interfacial electronic interactions, facilitating Na release and reductive decomposition. These results establish a direct correlation between solvent-dependent reaction pathways and thermal stability in SIB alloy anodes.

Accelerating rate calorimetry↗

Stability of Ba(Zr,Pr,Y)O{sub 3-{delta}} materials for potential application in electrochemical devices

Ba(Pr{sub 1-x}Zr{sub x}){sub 1-y}Y{sub y}O{sub 3-{delta}} materials were obtained by a two-step process of mechanical activation followed by annealing at 1250 {sup o}C. Guidelines for correlations between structure and composition, and their role on stability were characterised as a function of atmosphere, with special emphasis on degradation by carbonation in CO{sub 2}-rich atmospheres, or upon redox changes. The role of humidity on these degradation processes was also analysed by taking into account differences between wet and dry atmospheres with regards to the onset of secondary phases and structural changes. Thermodynamic calculations were used to predict 2-phase and 3-phase equilibria in contact with CO{sub 2}-rich atmospheres and to obtain corresponding stability diagrams. The thermodynamic calculations were also used as guidelines for the progress of carbonation in isothermal conditions, and also with variable temperature, namely on cooling carbonate free materials from high temperatures, or on re-heating under CO{sub 2}. -- Graphical abstract: The stability of Ba(Pr{sub 1-x}Zr{sub x}){sub 0.9}Y{sub 0.1}O{sub 3-{delta}} and Ba(Pr{sub 1-x}Zr{sub x}){sub 0.8}Y{sub 0.2}O{sub 3-{delta}} systems has been assessed in various atmospheres for 0{<=}x{<=}1. The figure shows that, by correct compositional selection, stability in reducing conditions can even extend to compositions containing high levels of Pr, such as Ba(Pr{sub 0.8}Zr{sub 0.2}){sub 0.8}Y{sub 0.2}O{sub 3-{delta}.} Display Omitted

36 MATERIALS SCIENCE↗

Preparation and thermal stability of the spindle α-Fe{sub 2}O{sub 3}@SiO{sub 2} core–shell nanoparticles

The spindle α-Fe{sub 2}O{sub 3}@SiO{sub 2} core–shell nanoparticles (NPs) are prepared via hydrothermal synthesis and modified Stöber method. During these processes, shell thicknesses could be easily adjusted by the amount of tetraethylorthosilicate (TEOS), and the formation of core-free SiO{sub 2} could be effectively avoided. The structures and compositions of α-Fe{sub 2}O{sub 3}@SiO{sub 2} NPs are investigated by transmission electron microscope (TEM), X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and ultraviolet–visible (UV–vis) absorption spectroscopy. These results reveal that the α-Fe{sub 2}O{sub 3}@SiO{sub 2} NPs with certain sizes are monodisperse and homogeneous. To estimate the thermal stability, the α-Fe{sub 2}O{sub 3}, α-Fe{sub 2}O{sub 3}@SiO{sub 2} and SiO{sub 2} NPs are annealed at 600, 800 and 1000 °C for 1 h under air atmosphere, respectively. Furthermore, the stabilities of these NPs are confirmed by thermal analysis methods. The structure and shape stabilities of these as-prepared α-Fe{sub 2}O{sub 3}@SiO{sub 2} NPs are investigated by XRD and scanning electron microscope (SEM). -- Graphical abstract: Schematic of preparation of the monodisperse spindle α-Fe{sub 2}O{sub 3}@SiO{sub 2} nanoparticles (NPs). Highlights: • The spindle α-Fe{sub 2}O{sub 3}@SiO{sub 2} nanoparticles (NPs) are successfully prepared by hydrothermal synthesis and modified Stöber method. • Optical properties are estimated and calculated by UV vis absorption spectrum. • Thermal stability of the α-Fe{sub 2}O{sub 3}, α-Fe{sub 2}O{sub 3}@SiO{sub 2} and SiO{sub 2} NPs are compared and analyzed by the SEM technique. • The structural changes of α-Fe{sub 2}O{sub 3}@SiO{sub 2} NPs are measured by XRD measurement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stability and phase evolution of mullite in reducing atmosphere

The aim of this study is to investigate the stability of mullite and its phase evolution when heated at 1600-1650 deg. C in reducing atmosphere created by a carbon bed. The stoichiometric mullite (3Al{sub 2}O{sub 3}.2SiO{sub 2}) was synthesized by reacting the proper precursors at 1400 deg. C in air atmosphere. Samples containing the primary mullite and graphite or carbon were prepared by pressing the mix and heated at 1600-1650 deg. C. Products were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the stoichiometric mullite could decompose to corundum and alumina-rich mullite. During firing under reducing atmosphere, the stoichiometric mullite became richer in Al{sup 3+} cations. The gaseous SiO compound was found to be released from the sample and reacting with C to form SiC phase. Comparison of general mullite solid solution (Al{sub 4+2x}Si{sub 2-2x}O{sub 10-x}) with alumina-rich mullite obtained from decomposition revealed that x would take different values depending on temperature and atmosphere. The ultimate decomposition product was found to be corundum. - Research Highlights: {yields} This method is a new route for investigation of thermochemical stability of stoichimetric mullite under reducing condition which have done by the authors. {yields} This research has got very good results for stability of mullite at different conditions. {yields} This work has also studied the mechanism of stability of mullite under reducing atmosphere.

36 MATERIALS SCIENCE↗

Effect of metal loading processes on the stability and thermal transformation of Co{sup 2+}- and Cu{sup 2+}-zeolite Y prepared from Egyptian kaolin

This paper aims to assess the effect of the transition metals (TM) loading procedure on the incorporation of Co{sup 2+} and Cu{sup 2+} in zeolite Y, and their relevance to stability of the zeolite, particularly with respect to the thermal transformation to the spinel phases. In this work, zeolite Y prepared from Egyptian kaolin was used. XRF, XRD, TEM, UV/visible absorption measurements, and atomic absorption analyses in addition to the visual observations are recorded. XRF has been used to investigate the materials composition. TEM and XRD indicate the presence of nanoparticle spinel upon the calcination of the TM-zeolites at 1000 Degree-Sign C. In addition to spinel particles, XRD shows the formation of metal oxides, SiO{sub 2} and alumino-silicate phases. According to the transition metal and the cation loading process, different phases were detected. UV/visible absorption measurements and the visual observations are used to determine the experimental condition of the highest spinel content. It has been noticed that the experimental conditions of the metal sorption processes greatly affect the phase transformation. Stability and thermal transformation of zeolite depend on the initial concentration of the transition cation solutions and the number of loading cycles. - Highlights: Black-Right-Pointing-Pointer We study the effects of loading procedure in the incorporation of TM in zeolite Y. Black-Right-Pointing-Pointer Synthetic zeolite Y prepared from Egyptian kaolin has been used. Black-Right-Pointing-Pointer The type of TM affects the stability and thermal transformation of zeolite. Black-Right-Pointing-Pointer Loading processes affect the stability and thermal transformation of zeolite.

36 MATERIALS SCIENCE↗

Photocatalytic activity and stability of TiO{sub 2} and WO{sub 3} thin films

Photocatalysis represents a viable option for complete degrading the dye molecules resulted in the textile industry, up to products that do not represent environmental threats. The photocatalytic degradation of methyl orange has been investigated using TiO{sub 2}, WO{sub 3} and mixed thin films. The photodegradation efficiency is examined in correlation with the experimental parameters (irradiation time, H{sub 2}O{sub 2} addition and stability), along with the morphology and crystallinity data. The H{sub 2}O{sub 2} addition increases the photodegradation efficiency by providing additional hydroxyl groups and further reducing the recombination of the electron-hole pairs by reacting with the electrons at the catalyst interface. To test the stability of the photocatalytic films in long time running processes, batch series of experiments were conducted using contact periods up to 9 days. The results show that the thin films maintained their photocatalytic properties confirming their stability and viability for up-scaling. Highlights: Black-Right-Pointing-Pointer TiO{sub 2}, WO{sub 3} and mixed thin films Black-Right-Pointing-Pointer We tested the photocatalytic activity and photocatalyst stability over a period up to 9 days of continuous irradiation. Black-Right-Pointing-Pointer The influence of medium pH and oxidizing agent (H{sub 2}O{sub 2}) was analyzed.

36 MATERIALS SCIENCE↗

Effect of small addition of Cr on stability of retained austenite in high carbon steel

High carbon steels with dual phase structures of martensite and austenite have considerable potential for industrial application in high abrasion environments due to their hardness, strength and relatively low cost. To design cost effective high carbon steels with superior properties, it is crucial to identify the effect of Chromium (Cr) on the stability of retained austenite (RA) and to fully understand its effect on solid-state phase transition. This study addresses this important knowledge gap. Using standard compression tests on bulk material, quantitative X-ray diffraction analysis, nano-indentation on individual austenitic grains, transmission electron microscopy and electron backscatter diffraction–based orientation microscopy techniques, the authors investigated the effect of Cr on the microstructure, transformation behaviour and mechanical stability of retained austenite in high carbon steel, with varying Cr contents. The results revealed that increasing the Cr %, altered the morphology of the RA and increased its stability, consequently, increasing the critical pressure for martensitic transformation. This study has critically addressed the elastoplastic behaviour of retained austenite – and provides a deep understanding of the effect of small additions of Cr on the metastable austenite of high carbon steel from the macro- to nano-level. Consequently, it paves the way for new applications for high carbon low alloy steels. - Highlights: • Effect of small addition of Cr on metastable austenite of high carbon steel from the macro- to nano-level • A multi-scale study of elastoplastic behaviour of retained austenite in high carbon steel • The mechanical stability of retained austenite during plastic deformation increased with increasing Cr content • Effect of grain boundary misorientation angle on hardness of individual retained austenite grains in high carbon steel.

36 MATERIALS SCIENCE↗

Thermal stability and transport studies of (100 - 2x)TeO{sub 2}-xAg{sub 2}O-xWO{sub 3} (7.5 {<=} x {<=} 30) glass system

Graphical abstract: Typical modulated DSC (NRHF and C{sub p}) results during a heating scan in the 85TeO{sub 2}-7.5Ag{sub 2}O-7.5WO{sub 3} glass sample. Research highlights: {yields} The addition of equal mol% of WO{sub 3} and Ag{sub 2}O to TeO{sub 2} increases the thermal stability. {yields} The 55TeO{sub 2}-22.5WO{sub 3}-22.5Ag{sub 2}O shows the highest thermal stability ({Delta}T = 237 {sup o}C). {yields} These glasses are more useful for drawing of optical fibers. {yields} The present glass system shows higher conductivity. -- Abstract: Differential scanning calorimetry (DSC), infrared (IR) and direct current (DC) conductivity studies have been carried out on (100 - 2x)TeO{sub 2}-xAg{sub 2}O-xWO{sub 3} (7.5 {<=} x {<=} 30) glass system. The IR studies show that the structure of glass network consists of [TeO{sub 4}], [TeO{sub 3}]/[TeO{sub 3+1}], [WO{sub 4}] units. Thermal properties such as the glass transition (T{sub g}), onset crystallization (T{sub o}), thermal stability ({Delta}T), glass transition width ({Delta}T{sub g}), heat capacities in the glassy and liquid state (C{sub pg} and C{sub pl}), heat capacity change ({Delta}C{sub p}) and ratios C{sub pl}/C{sub pg} of the glass systems were calculated. The highest thermal stability (237 {sup o}C) obtained in 55TeO{sub 2}-22.5Ag{sub 2}O-22.5WO{sub 3} glass suggests that this new glass may be a potentially useful candidate material host for rare earth doped optical fibers. The DC conductivity of glasses was measured in temperature region 27-260 {sup o}C, the activation energy (E{sub act}) values varied from 1.393 to 0.272 eV and for the temperature interval 170-260 {sup o}C, the values of conductivity ({sigma}) of glasses varied from 8.79 x 10{sup -9} to 1.47 x 10{sup -6} S cm{sup -1}.

36 MATERIALS SCIENCE↗

Structural stability and mutual transformations of molybdenum carbide, nitride and phosphide

Graphical abstract: Both Mo{sub 2}C and Mo{sub 2}N can be transformed to MoP, whereas the reverse changes are inviable, which is used to develop a promising and practical pathway for preparing MoP nanoparticles. Highlights: {yields} Mo carbide, nitride and phosphide are prepared. {yields} The structural stability increases in the order of Mo{sub 2}N < Mo{sub 2}C < MoP. {yields} Both Mo{sub 2}C and Mo{sub 2}N can be transformed to MoP, whereas the reverse changes are inviable. {yields} This study develops a promising and practical pathway for preparing MoP nanoparticles. -- Abstract: The structural stability and transformations of Mo carbide, nitride and phosphide were investigated under various atmosphere conditions by X-ray diffraction (XRD). The results indicated that the order of structural stability of these Mo-based compounds was as follows: Mo{sub 2}N < Mo{sub 2}C < MoP. Both Mo{sub 2}C and Mo{sub 2}N can be transformed to MoP, whereas the reverse transformations did not occur. Noticeably, compared with those Mo sources containing oxygen, the use of Mo{sub 2}C/Mo{sub 2}N as Mo-source can produce finely dispersed MoP nanoparticles by the temperature-programmed reaction (TPR) method. The result was probably due to the fact that lower-levels H{sub 2}O generated during synthesis process can avoid strong hydrothermal sintering. The influence of formation energy had been considered and was found to relate to the structural stability and transformations of these Mo-based compounds.

36 MATERIALS SCIENCE↗

The influence of α-FeOOH/rGO hybrids on the improved thermal stability and smoke suppression properties in polystyrene

Highlights: • In this paper, α-FeOOH/rGO hybrids had been prepared by a facile hydrothermal method. • The addition of the α-FeOOH/rGO hybrids showed a significant effect on the thermal stability and smoke suppression properties of PS composites. • Graphene can be employed to improve the smoke suppression properties of polymer and further extended the application of graphene. - Abstract: In this work, α-FeOOH/rGO hybrids were firstly prepared by a facile hydrothermal method. X-ray diffraction and transmission electron microscopy results indicated that α-FeOOH nanoparticles were dispersed uniformly on the surface of graphene nanosheets. Subsequently, the α-FeOOH/rGO hybrids were incorporated into polystyrene (PS) matrix for the improvement of the thermal stability and smoke suppression properties. It was found that the thermal stability of PS nanocomposite was obviously enhanced upon the introduction of 2.0 wt% α-FeOOH/rGO hybrids. Furthermore, the addition of α-FeOOH/rGO hybrids could improve the smoke suppression properties of PS nanocomposites, as evidenced by the dramatical reduction of carbon monoxide production rate, total smoke release and total smoke production. The total flammable gaseous products from the PS nanocomposites were decreased which further led to the inhibition of smoke. Such a significant improvement in thermal stability and smoke suppression properties was mainly attributed to the physical barrier effect of graphene nanosheets and the catalytic carbonization function of α-FeOOH nanoparticles.

36 MATERIALS SCIENCE↗

Enhanced performance and stability of electrochromic device based on poly (3-methylthiophene) using 2-thiophenecarboxylic acid as interfacial modifier

Highlights: • The PMeT film covalently bonded to ITO electrode was prepared using ThCA as modifier. • The adsorption force between the PMeT film and ITO electrode was enhanced. • The ECD based on PMeT-ITO exhibited better electrochromic stability. - Abstract: In this paper, we modified the surface of Indium tin oxide (ITO) electrode with 2-thiophenecarboxylic acid (ThCA), and then prepared the poly (3-methylthiophene) (PMeT) film covalently bonded to ITO electrode (PMeT-ITO) by electrochemical polymerization. It was found that interfacial modification enhanced the adsorption force between PMeT and ITO substrate, PMeT-ITO exhibited better stability. Moreover, we successfully fabricated the electrochromic device (ECD) by using PMeT films on ITO substrate. The results of cycling tests showed that the optical contrast of ECD based on PMeT-ITO was kept almost the same after recycling 66 times. Compared with ECD based on PMeT physically adsorbed on bare ITO substrate (PD-PMeT), the ECD based on PMeT-ITO possessed good electrochromic stability in the 150 cycles. This demonstrated that the interaction between PMeT and ITO substrate became stronger by chemical bonding approach, improving the cyclic stability of ECD.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding improved cycling and thermal stability of compositionally graded Ni-rich layered LiNi 0.6 Mn 0.2 Co 0.2 O 2 cathode materials

The concentration gradient is a strategic design, adjusting the distribution of Ni, typically with a higher Ni content in the core and a higher Mn content toward the surface. This design leverages the pivotal role of the Ni/Mn ratio, seeking to optimize cathode performance by balancing Ni's high capacity with Mn's stabilizing effects, particularly at the surface where degradation commonly occurs during cycling. Here, our study delves into the intricate structural and chemical transformations within concentration gradient cathode materials during electrochemical cycling. Utilizing advanced synchrotron X-ray techniques, including hard and soft X-ray absorption spectroscopy (hXAS, sXAS), and nanoscale X-ray imaging, we investigate buried changes in concentration gradient LiNi 0.6 Mn 0.2 Co 0.2 O 2 (CG NMC622). Contrary to conventional assumptions, our findings challenge the notion that cycling stability relies solely on Mn stability. Unraveling the roles of Ni and Mn, we uncover how their individual and collective contributions impact the cathode's overall performance. This investigation transcends established paradigms, shedding light on the crucial mechanisms governing the enhanced cycling stability of Nirich layered cathode materials.

25 ENERGY STORAGE↗

Solid breeder material crystal structure evolution due to Li burn up–Loss of crystal stability

Solid breeder materials for fusion power plants are subjected to extreme conditions of radiation damage, high temperature and designed component burn-up. Here, the loss of lattice stability of Li 2 TiO 3 due to Li burn-up was investigated using first principles-based approaches to aid evaluation of upper limit of component lifetime. The lattice stability is analyzed using calculated phonon dispersion in the Li 2 TiO 3 supercell, while Li burn-up is modeled by the introduction of Li-vacancies. It has been determined that the studied ceramic can be structurally stable up to ~40% of Li atoms burn-up. At 50% burn-up, the negative frequency branch in the phonon dispersion spectrum appears indicating the loss of lattice dynamical stability. Moreover, the structure obtained by introduction of unstable frozen phonons with minima energy amplitude also results in a phonon dispersion with negative branches in the structure obtained. Therefore, the system completely loses stability when approximately half of Li atoms are consumed.

36 MATERIALS SCIENCE↗

Gallic acid-capped gold nanoparticles inhibit EGF-induced MMP-9 expression through suppression of p300 stabilization and NFκB/c-Jun activation in breast cancer MDA-MB-231 cells

Triple-negative breast cancers (TNBCs) are highly invasive and have a higher rate of distant metastasis. Matrix metalloproteinase-9 (MMP-9) plays a crucial role in EGF/EGFR-mediated malignant progression and metastasis of TNBCs. Various studies have revealed that treatment with gallic acid down-regulates MMP-9 expression in cancer cells, and that conjugation of phytochemical compounds with gold nanoparticles (AuNPs) increases the anti-tumor activity of the phytochemical compounds. Thus, the effect of gallic acid-capped AuNPs (GA-AuNPs) on MMP-9 expression in EGF-treated TNBC MDA-MB-231 cells was analyzed in the present study. The so-called green synthesis of AuNPs by means of gallic acid was performed at pH 10, and the resulting GA-AuNPs had spherical shape with an average diameter of approximately 50 nm. GA-AuNPs notably suppressed migration and invasion of EGF-treated cells, and inhibited EGF-induced MMP-9 up-regulation. GA-AuNPs abrogated EGF-induced Akt/p65 and ERK/c-Jun phosphorylation, leading to down-regulation of MMP-9 mRNA and protein expression in EGF-treated cells. Meanwhile, EGF-induced p300 stabilization was found to be involved in MMP-9 expression, whereas GA-AuNPs inhibited the EGF-promoted stability of the p300 protein. Although GA-AuNPs and gallic acid suppressed EGF-induced MMP-9 up-regulation via the same signaling pathway, the effective concentration of gallic acid was approximately 100-fold higher than that of GA-AuNPs for inhibition of MMP-9 expression in EGF-treated cells to a similar extent. Collectively, our data indicate that, in comparison with gallic acid, GA-AuNPs have a superior ability to inhibit EGF/EGFR-mediated MMP-9 expression in TNBC MDA-MB-231 cells. Our findings also point to a way to improve the anti-tumor activity of gallic acid. - Highlights: • Gallic acid-capped gold nanoparticles inhibit EGF-induced MMP-9 expression. • EGF-induced MMP-9 expression via p300 stabilization and NFκB/c-Jun activation. • Gallic acid-capped gold nanoparticles inhibit EGF-modulated p300 stabilization. • Gallic acid-capped gold nanoparticles abrogate EGF-induced NFκB/c-Jun activation.

54 ENVIRONMENTAL SCIENCES↗

High glucose activates ERK1/2 to stabilize AP1 and increase MMP9 expression in diabetic foot ulcers

Increased matrix metalloproteinase 9 (MMP9) expression is involved in delayed wound healing in diabetic foot ulcers. We created skin wounds in normal SD rats and STZ-induced diabetic SD rats, then we found protein levels of activator protein-1 (AP1), a crucial transcription factor to increase MMP9 transcription, as well as MMP9 was up-regulated in epithelium of diabetic skin tissues. Then, we evaluated the mRNA and protein stability of AP1 subunits C-FOS/C-Jun in HaCaT cells after high glucose treatment. Results showed that high glucose could increase protein stability of C-FOS and C-Jun. Additionally, high glucose also activated extracellular signaling-related kinase 1/2 (ERK1/2). ERK1/2 inhibitor could rescue phosphorylation of C-FOS and C-Jun, increased protein stability of C-Jun, and increased MMP9 expressions. Thus, our study demonstrated that high glucose could activate ERK1/2 to stabilize AP1 and increase MMP9 expression in diabetic skin and HaCaT cells.

60 APPLIED LIFE SCIENCES↗

V67L Mutation Fills an Internal Cavity To Stabilize RecA Mtu Intein

Inteins mediate protein splicing, which has found extensive applications in protein science and biotechnology. In the Mycobacterium tuberculosis RecA mini–mini intein (ΔΔIhh), a single valine to leucine substitution at position 67 (V67L) dramatically increases intein stability and activity. However, crystal structures show that the V67L mutation causes minimal structural rearrangements, with a root-mean-square deviation of 0.2 Å between ΔΔIhh-V67 and ΔΔIhh-L67. Thus, the structural mechanisms for V67L stabilization and activation remain poorly understood. In this paper, we used intrinsic tryptophan fluorescence, high-pressure nuclear magnetic resonance (NMR), and molecular dynamics (MD) simulations to probe the structural basis of V67L stabilization of the intein fold. Guanidine hydrochloride denaturation monitored by fluorescence yielded free energy changes (ΔG f °) of -4.4 and -6.9 kcal mol –1 for ΔΔIhh-V67 and ΔΔIhh-L67, respectively. High-pressure NMR showed that ΔΔIhh-L67 is more resistant to pressure-induced unfolding than ΔΔIhh-V67 is. The change in the volume of folding (ΔV f ) was significantly larger for V67 (71 ± 2 mL mol –1 ) than for L67 (58 ± 3 mL mol –1 ) inteins. The measured difference in ΔV f (13 ± 3 mL mol –1 ) roughly corresponds to the volume of the additional methylene group for Leu, supporting the notion that the V67L mutation fills a nearby cavity to enhance intein stability. In addition, we performed MD simulations to show that V67L decreases side chain dynamics and conformational entropy at the active site. Finally, it is plausible that changes in cavities in V67L can also mediate allosteric effects to change active site dynamics and enhance intein activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid Assessment of the Physical Stability of Amorphous Solid Dispersions

Amorphous solid dispersions (ASDs) can potentially increase the apparent solubility and thereby the oral bioavailability of poorly soluble compounds. Furthermore, their physical instability, i.e., potential to crystallize, is a major concern. Our objective was to explore methods for rapid assessment of the physical stability of ASDs. Ketoconazole ASDs were prepared with each of the three polymers, poly(acrylic acid) (PAA), poly(2-hydroxyethyl methacrylate) (PHEMA), and polyvinylpyrrolidone (PVP). The physical stability of these ASDs was evaluated after exposure to 90% RH (25 °C) in an automated water sorption analyzer. The onset time for ketoconazole crystallization, induced by water sorption, was rank ordered as PAA > PHEMA > PVP. Additionally, the ability of the polymers to inhibit crystallization on contact with aqueous medium was studied by powder X-ray diffractometry using synchrotron radiation. In this case, the rank ordering was PAA ~ PHEMA > PVP. To check the validity of our approach, the long-term stability of ketoconazole in ASDs was evaluated in the glassy state, both at 25 and at 40 °C, and was rank ordered as PAA > PHEMA > PVP. Crystallization, accelerated by water vapor sorption, can serve as an effective preliminary screening tool to rapidly evaluate and rank order the physical stability of ASDs.

60 APPLIED LIFE SCIENCES↗