Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Electronic structure, magnetic properties, spin orientation, and doping effect in Mn 3 Si 2 Te 6

The layered material Mn 3 Si 2 Te 6 , with alternating stacking honeycomb and triangular layers, is attracting considerable attention due to its rich physical properties. Here, in this study, using density functional theory and classical Monte Carlo (MC) methods, we systematically study this system with the 3d 5 electronic configuration. Near the Fermi level, the states are mainly contributed by Te 5p orbitals hybridized with Mn 3d orbitals, resembling a charge-transfer system. Furthermore, the spin orientations of the ferrimagnetic (FiM) ground state display different conductive behaviors when along the ab plane or out-of-plane directions: insulating vs metallic states. The energy difference between the FiM [110] insulating and FiM [001] metallic phases is very small (~0.71 meV/Mn) . Changing the angle θ of spin orientation from in-plane to out-of-plane directions, the band gaps of this system are gradually reduced, leading to an insulator-metal transition, resulting in an enhanced electrical conductivity, related to the colossal angular magnetoresistance (MR) effect. Although the three main magnetic couplings were found to be antiferromagnetic, overall the ground state is FiM. In addition, we also constructed the magnetic phase diagram using the classical XY spin model studied with the MC method. Three magnetic phases were obtained, including antiferromagnetic order, noncollinear spin patterns, and FiM order. Moreover, we also investigated the Se and Ge doping into the Mn 3 Si 2 Te 6 system: the FiM state has the lowest energy among the magnetic candidates for both Se- and Ge-doped cases. The magnetic anisotropy energy (MAE) decreases in the Se-doped case because the Mn orbital moment is reduced as the doping x increases. Due to the small spin-orbit-coupling effect of Se, the insulator-metal transition caused by the spin orientation disappears in the Se-doped case, resulting in an insulating phase in the FiM [001] phase. This causes a reduced colossal angular MR. However, both the MAE and the band gap of the Ge-doped case do not change much with increasing doping x . Our results for Mn 3 Si 2 Te 6 could provide guidance to experimentalists and theorists working on this system or related materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Real‐Time Optical Process Monitoring for Structure and Property Control of Aerosol Jet Printed Functional Materials

Abstract Aerosol jet printing is a popular digital additive manufacturing method for flexible and hybrid electronics, but it lacks sophisticated real‐time process control schemes that would enable more widespread adoption in manufacturing environments. Here, an optical measurement system is introduced to track the aerosol density upstream of the printhead. The measured optical extinction, combined with the aerosol flow rate, is directly related to deposition rate and accurately predicts functional materials properties such as the electrical resistance of printed graphene films. This real‐time system offers a compelling solution for process drift and batch‐to‐batch variability, rendering it a valuable tool for both real‐time control of aerosol jet printing and fundamental studies of the underlying process science.

Tafoya, Rebecca R.↗

Synthesis and oxidation catalysis of [tris(oxazolinyl)borato]cobalt(II) scorpionates

The reaction of CoCl 2 ·THF and thallium tris(4,4-dimethyl-2-oxazolinyl)phenylborate (TlTo M ) in tetrahydrofuran (THF) provides To M CoCl (1) in 95 % yield; however, appropriate solvents and starting materials are required to favor 1 over two other readily formed side-products, (To M ) 2 Co (2) and {HTo M }CoCl 2 (3). ESR, NMR, FTIR, and UV/Vis spectroscopies were used to distinguish these cobalt(II) products and probe their electronic and structural properties. Even after the structures indicated by these methods were confirmed by X-ray crystallography, the spectroscopic identification of trace contaminants in the material was challenging. The recognition of possible contaminants in the synthesis of To M CoCl in combination with the paramagnetic nature of these complexes provided impetus for the utilization of X-ray powder diffraction to measure the purity of the To M CoCl bulk sample. Furthermore, the X-ray powder diffraction results provide support for the bulk-phase purity of To M CoCl in preparations that avoid 2 and 3. Thus, 1 is a precursor for new [tris(oxazolinyl)borato]cobalt chemistry, as exemplified by its reactions with KOtBu and NaOAc to give To M CoOtBu (4) and To M CoOAc (5), respectively. Compound 5 is a catalyst for the oxidation of cyclohexane with meta-chloroperoxybenzoic acid (mCPBA), and the rate constants and selectivity for cyclohexanol versus cyclohexanone and ϵ-caprolactone were assessed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Processing-structure-mechanical Property Relationships of Semicrystalline Polyolefin-based Block Copolymers

The incremental plastic deformation of the crystals of block copolymers made of semicrystalline polypropylene endblocks and amorphous ethylene-r-propylene midblocks occurring during step cycle tensile tests has dramatic effects on the stress-strain curves. This can be understood from the evolution of the morphology and of the microstructure of the crystalline blocks revealed by X-ray scattering experiments.

36 MATERIALS SCIENCE↗

An asynchronous parallel high-throughput model calibration framework for crystal plasticity finite element constitutive models

Crystal plasticity finite element model (CPFEM) is a powerful numerical simulation in the integrated computational materials engineering toolboxes that relates microstructures to homogenized materials properties and establishes the structure–property linkages in computational materials science. However, to establish the predictive capability, one needs to calibrate the underlying constitutive model, verify the solution and validate the model prediction against experimental data. Bayesian optimization (BO) has stood out as a gradient-free efficient global optimization algorithm that is capable of calibrating constitutive models for CPFEM. Here in this paper, we apply a recently developed asynchronous parallel constrained BO algorithm to calibrate phenomenological constitutive models for stainless steel 304 L, Tantalum, and Cantor high-entropy alloy.

304L stainless steel↗

Structure and properties of nanocomposites based on poly(arylene ether ketones) and metalalkoxysiloxanes

Nanocomposites obtained by in situ filling from amorphous poly(arylene ether ketones) based on 4,4´-difluorobenzophenone and 3,3-bis(4´-hydroxyphenyl)phthalide (phenolphthalein) with hydroxyl or benzophenone end groups were investigated. Metalalkoxysiloxanes, namely tris-(diethoxymethylsiloxy)iron, tetrakis-(diethoxymethylsiloxy)zirconium, and tetrakis- (diethoxymethylsiloxy)hafnium were used as precursors of the inorganic phase. It is shown that the morphology of the inorganic phase of nanocomposites can be varied from dispersed particles to a continuous network only by changing the type of the central metal atom of the metalalkoxysiloxane with the same organosilicon “framing”. The concentration of the precursor influences mainly the size of the filler particles. An application of tris-(diethoxymethylsiloxy)iron at a concentration of less than 14 wt.% makes it possible to obtain in situ filled polymers with a higher glass transition temperature than the ones obtained using tetrakis-(diethoxymethylsiloxy)zirconium or tetrakis-(diethoxymethylsiloxy)hafnium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and Properties of one- and Two-Dimensional Clusters of Groups IV–VI of Heavy р-Elements

The paper presents the results of theoretical investigations of the equilibrium atomic configurations and electronic properties of dimers and trimers of p-elements of IV (Pb), V (Bi) and VI (Te) groups as well as their cations and anions. The density functional theory calculations are used to obtain the equilibrium bond lengths and binding energies, vibrational frequencies, the HOMO-LUMO gaps for heavy element clusters with a strong relativistic effect. It is shown that spin-orbit coupling should be taken into consideration due to its substantial effect on energy and oscillating parameters of clusters.

74 ATOMIC AND MOLECULAR PHYSICS↗

Thermal Annealing Effect on Structure and Properties of Tungsten Surface Irradiated with High Fluence and Low Energy Alpha-Particles

The paper presents research into the surface morphology, helium cluster formation and mechanical properties of high-purity tungsten after the high fluence and low-energy helium ion implantation and subsequent annealing. Investigations are based on scanning electron and atomic force microscopy observations and thermal desorption measurements. Because of the local stresses appearing within the energy loss straggling of helium ions, atoms migrate at distances significantly increasing the ion projective range, and create mobile coalescence of helium atoms and immobile helium-vacancy clusters. The latter form helium bubbles in the energy loss straggling which cause the surface blistering. Local stresses induced by helium coalescence and helium-vacancy clusters beyond the energy loss straggling result in the material strengthening or hardness increase. Subsequent 600°С annealing provides the size growth of blisters on the metal surface irradiated with helium ions and high helium desorption due to the migration of mobile coalescence of helium atoms. With the increasing annealing temperature from 600 to 1000°С, the layer corresponding to the projective range of helium ions fully fractures due to the interstitial helium atoms releasing from immobile helium-vacancy clusters. After 1000°С annealing, the tungsten hardness returns to its initial value.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Molybdenum Content on Structure and Properties of a Co-Cr Biomedical Alloy

The present study aimed to develop several Co-Cr biomedical alloys with different amounts of molybdenum. The weight percentages of molybdenum were in the range of 0-4 wt.% in the base alloy (Co-30Cr). The microstructures, phases, density, mechanical strength, wear behavior and corrosion characteristics of these alloys were evaluated. The results showed that density, hardness and compressive strength increased by increase in Mo content in the alloy. In contrast, corrosion rate decreased when the Mo weight percentage was increased. Furthermore, addition of Mo up to 3 wt.% caused the volumetric wear loss to increase. However, 4 wt.% Mo in the alloy led to a reduction in the volumetric wear loss, even lower than that of Co-30Cr alloy without molybdenum. The variations of friction coefficient, however, were different under different operating conditions. Since no single alloy could merely satisfy all the desired characteristics, the entropy–analytic hierarchy process (AHP)–gray relational analysis (GRA) technique was utilized to select the best alloy among the examined materials. From the ranking order gained, it was indicated that M-4 (having 4 wt.% Mo) biomedical alloy possesses the best combination of all the properties.

36 MATERIALS SCIENCE↗

A deep learning interatomic potential developed for atomistic simulation of carbon materials

Interatomic potentials based on neural-network machine learning method have attracted considerable attention in recent years owing to their outstanding ability to balance the accuracy and efficiency in atomistic simulations. In this work, a neural-network potential (NNP) for carbon is generated to simulate the structural properties of various carbon structures. The potential is trained using a database consisting of crystalline and liquid structures obtained by the first-principles density functional theory (DFT) calculations. The developed potential accurately predicts the energies and forces in crystalline and liquid carbon structures, the energetic stability of defected graphene, and the structures of amorphous carbon as the function of density. As a result, the excellent accuracy and transferability of the NNP provide a promising tool for accurate atomistic simulations of various carbon materials with faster speed and much lower cost.

36 MATERIALS SCIENCE↗

Bis–Calix[4]pyrroles: Preparation, structure, complexation properties and beyond

Calix[4]pyrrole and its derivatives are key members of the supramolecular Parthenon along with other well-recognized receptor systems, such as crown ethers, cyclodextrins (CDs), cucurbiturils, calixarenes and pillararenes. Calix[4]pyrroles are relatively easy–to–make and widely recognized for their ability to bind anions and ion pairs. Many review papers relating to aspects of calix[4]pyrrole chemistry have been published within the past decades. These reviews have focused primarily on monomeric calix[4]pyrroles. The emergent area of Bis–calix[4]pyrroles, species wherein two calix[4]pyrrole subunits are linked by one or more “walls”, has not benefited from such treatment, even though the species in question often exhibit enhanced binding affinities and selectivities relative to their single calix[4[pyrrole congeners. This review is designed to summarize recent progress involving bis–calix[4]pyrroles. Advances in the design, synthesis, and coordination chemistry of bis–calix[4]pyrroles containing “one wall”, “two walls”, “three walls”, and “four walls”, as well as their possible application in ion recognition, sensing and logic gate construction, will be detailed. Lastly, the hope is that this review will provide a guide for the design and preparation of new multi-component calix[4]pyrrole receptors possessing improved recognition properties, thereby advancing host–guest chemistry in new and useful directions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗