Search NASA⌕ Search

SEARCH · Search NASA

Results for “compositional analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Synthesis, structural characterization and Li{sup +} ion conductivity of a new vanado-molybdate phase, LiMg{sub 3}VMo{sub 2}O{sub 12}

A new vanado-molybdate LiMg{sub 3}VMo{sub 2}O{sub 12} has been synthesized, the crystal structure determined an ionic conductivity measured. The solid solution Li{sub 2-z}Mg{sub 2+z}V{sub z}Mo{sub 3-z}O{sub 12} was investigated and the structures of the z=0.5 and 1.0 compositions were refined by Rietveld analysis of powder X-ray (XRD) and powder neutron diffraction (ND) data. The structures were refined in the orthorhombic space group Pnma with a{approx}5.10, b{approx}10.4 and c{approx}17.6 A, and are isostructural with the previously reported double molybdates Li{sub 2}M{sub 2}(MoO{sub 4}){sub 3} (M=M{sup 2+}, z=0). The structures comprise of two unique (Li/Mg)O{sub 6} octahedra, (Li/Mg)O{sub 6} trigonal prisms and two unique (Mo/V)O{sub 4} tetrahedra. A well-defined 1:3 ratio of Li{sup +}:Mg{sup 2+} is observed in octahedral chains for LiMg{sub 3}VMo{sub 2}O{sub 12}. Li{sup +} preferentially occupies trigonal prisms and Mg{sup 2+} favours octahedral sheets. Excess V{sup 5+} adjacent to the octahedral sheets may indicate short-range order. Ionic conductivity measured by impedance spectroscopy (IS) and differential scanning calorimetry (DSC) measurements show the presence of a phase transition, at 500-600 {sup o}C, depending on x. A decrease in activation energy for Li{sup +} ion conductivity occurs at the phase transition and the high temperature structure is a good Li{sup +} ion conductor, with {sigma}=1x10{sup -3}-4x10{sup -2} S cm{sup -1} and E{sub a}=0.6 to 0.8 eV. - Graphical abstract: A new vanado-molybdate LiMg{sub 3}VMo{sub 2}O{sub 12} has been synthesized and the crystal structure determined. Ionic conductivity measurements show the presence of a phase transition, at 500-600 {sup o}C. A large decrease in activation energy for Li{sup +} ion conductivity occurs at the phase transition and the high temperature structure is a good Li{sup +} ion conductor. Display Omitted

36 MATERIALS SCIENCE↗

New ternary tantalum borides containing boron dumbbells: Experimental and theoretical studies of Ta{sub 2}OsB{sub 2} and TaRuB

The new ternary transition metal-rich borides Ta{sub 2}OsB{sub 2} and TaRuB have been successfully synthesized by arc-melting the elements in a water-cooled crucible under an argon atmosphere. The crystal structures of both compounds were solved by single-crystal X-ray diffraction and their metal compositions were confirmed by EDX analysis. It was found that Ta{sub 2}OsB{sub 2} and TaRuB crystallize in the tetragonal Nb{sub 2}OsB{sub 2} (space group P4/mnc, no. 128) and the orthorhombic NbRuB (space group Pmma, no. 51) structure types with lattice parameters a=5.878(2) Å, c=6.857(2) Å and a=10.806(2) Å, b=3.196(1) Å, c=6.312(2) Å, respectively. Furthermore, crystallographic, electronic and bonding characteristics have been studied by density functional theory (DFT). Electronic structure relaxation has confirmed the crystallographic parameters while COHP bonding analysis indicates that B{sub 2}-dummbells are the strongest bonds in both compounds. Moreover, the formation of osmium dumbbells in Ta{sub 2}OsB{sub 2} through a Peierls distortion along the c-axis, is found to be the origin of superstructure formation. Magnetic susceptibility measurements reveal that the two phases are Pauli paramagnets, thus confirming the theoretical DOS prediction of metallic character. Also hints of superconductivity are found in the two phases, however lack of single phase samples has prevented confirmation. Furthermore, the thermodynamic stability of the two modifications of AMB (A=Nb, Ta; M =Ru, Os) are studied using DFT, as new possible phases containing either B{sub 4}- or B{sub 2}-units are predicted, the former being the most thermodynamically stable modification. - Graphical abstract: The two new ternary tantalum borides, Ta{sub 2}OsB{sub 2} and TaRuB, have been discovered. Their crystal structures contain boron dumbbells, which are the strongest bonds. Peirls distortion is found responsible for Os{sub 2}-dumbbells formation in Ta{sub 2}OsB{sub 2}. Ta{sub 2}OsB{sub 2} and TaRuB are Pauli paramagnet and potential superconductors. - Highlights: • Two new ternary tantalum borides, Ta{sub 2}OsB{sub 2} and TaRuB, discovered. • Boron dumbbells are the strongest bonds in Ta{sub 2}OsB{sub 2} and TaRuB. • Peierls distortion responsible for Os{sub 2}-dumbbells formation in Ta{sub 2}OsB{sub 2.} • Ta{sub 2}OsB{sub 2} and TaRuB are Pauli paramagnet. • Ta{sub 2}OsB{sub 2} and TaRuB contain pseudogaps and are potential superconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Archaeometallurgical investigation of the iron anchor from the Tantura F shipwreck

The Tantura F shipwreck was a coaster or a fishing vessel about 15.7 m long, discovered in the Dor/Tantura lagoon, Israel in 1995. It was dated to between the mid-7th and the end of the 8th centuries CE. Among the finds excavated were two T-shaped type iron anchors. Of the two anchors, one (anchor A) was thoroughly studied by archaeometallurgical methods in order to identify forge-welding lines, to determine the welding quality and to understand the manufacturing technology. The examinations included X-ray radiography, XRF analysis, optical microscopy, SEM/EDS observation and analysis, OES analysis and microhardness tests. The investigation included characterization of the composition, microstructure, thermal treatments, forge-welding junctions and slag analysis. The results revealed a heterogeneous microstructure, rich in glassy, fayalite and wüstite slag. Iron based phases included ferrite, pearlite, cementite and Widmanstätten plates, all typical to wrought iron. The forge-welds of Anchor A were located. Each arm was made of one piece, weighing about 2.5–3 kg and the shank was made of a few 1.5–2 kg pieces. The second anchor (anchor B) was only briefly examined visually and with a few radiographs, which support the results from anchor A. The research results revealed significant information about T-shaped anchors and their manufacturing process, including hot-working processes without any additional heat treatments, and folding techniques. The microstructure was similar to other ancient simple tools such as saws, sickles, axes and mortise chisels, and though the technology to make complicated structures and objects, such as swords, existed at that time, the anchors did not require this sophistication; thus simpler techniques were used, presumably because they were more cost-effective. - Highlights: ► Tantura F was a coaster dated to mid-7th–end-8th centuries. ► Two iron anchors were discovered at the Tantura F shipwreck-site. ► Anchor A was manufactured from heterogeneous wrought iron blooms. ► Forge-welding lines were detected using archaeometallurgical methods.

36 MATERIALS SCIENCE↗

Characterisation of organic-inorganic hybrid materials of the types ZnxCd1-xSe(1,3-diaminopropane)1/2 and ZnSySe1-y(1,3-diaminopropane)1/2

Highlights: • New hybrid materials: Zn{sub x}Cd{sub 1-x}Se(1,3-DAP){sub 1/2} and ZnS{sub x}Se{sub 1-x}(1,3-DAP){sub 1/2} were obtained. • Hybrids were studied using XRD, TG/DSC, XRD vs. temperature, SEM, UV–vis spectroscopy. • The impact of the composition of the layers on optical properties were studied. - Abstract: Organic-inorganic hybrid materials of the type MeQ(diamine){sub 1/2} (where Me–Zn, Cd, Mn and Q–S, Se, Te) belong to the class of 3D nanomaterials. They are built of layers of II–VI semiconductors and amines, which act as linkers. The main goal of our work was the synthesis of compounds of the type Zn{sub x}Cd{sub 1-x}Se(1,3-diaminopropane){sub 1/2} and ZnS{sub y}Se{sub 1-y}(1,3-diaminopropane){sub 1/2} (where x, y = 0, 0.25, 0.5, 0.75, 1) and the study of properties changed by the composition of the semiconducting layers. Analysis of these materials was carried out with the use of X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), simultaneous thermogravimetry and differential scanning calorimetry (TG-DSC) as well as temperature dependent XRPD enabled us to obtain information about the thermal stability of hybrid compounds with mixed semiconducting layers. Another important part of our work was a study, performed with the use of UV–vis spectroscopy, of the optical properties of these materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of the structural and magnetic phase-transitions and multiferroic properties in BiFeO3-Ba0.95Ca0.05TiO3 solid solutions

Highlights: • The detailed structural analysis has been done for (1-x) BiFeO{sub 3}-xBa{sub 0.95}Ca{sub 0.05}TiO{sub 3} (0.1 ≤ x ≤ 0.9). • The detailed magnetic behavior has been studied for (1-x) BiFeO{sub 3}-xBa{sub 0.95}Ca{sub 0.05}TiO{sub 3} (0.1 ≤ x ≤ 0.9). • The dielectric constant (ε') and the dielectric loss (ε'') versus frequency curves have been fitted by using Cole-Cole dispersion formula and non-Debye relaxation behavior has been found. • The weak magnetodielectric response (MD) has been found. • The non saturating P-E loops have been found for 0.7 ≤ x ≤ 0.9 samples. - Abstract: We synthesized (1-x) BiFeO{sub 3}-x Ba{sub 0.95}Ca{sub 0.05}TiO{sub 3} solid solutions for 0.1 ≤ x ≤ 0.9, using a solid-state-reaction. The XRD analysis reveals that a composition-driven rhombohedral-to-cubic and a cubic-to-tetragonal phase-transition occur at x ≈ 0.4 and x ≈ 0.7, respectively. The experiments show that BaCaTiO{sub 3}-substitution suppresses the spiral spin-structure, which leads to net magnetization. The samples have been found to exhibit magnetic order for 0.1 ≤ x ≤ 0.7 and paramagnetic behavior for x ≥ 0.8. The electrical conductivity increases with increasing frequency of the applied electric field. The dielectric measurements suggest a non-Debye type relaxation. The samples show magneto-dielectric response (MD) upto x = 0.5, with the highest MD of 11.61% at 10 kHz for x = 0.3. The maximum attainable remanent polarization (P{sub r}) ∼ 5.24 μC/cm{sup 2} was observed for x = 0.7.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Priming mechanisms providing plants and microbes access to mineral-associated organic matter

Mineral-associated organic matter (MAOM) is considered a stable reservoir for soil nutrients that influences long-term soil carbon (C) and nitrogen (N) dynamics. However, recent experimental and theoretical evidence shows that root exudates may mobilize MAOM, thereby providing plants and microbes access to a large and N-rich pool. Given the mechanisms underlying MAOM C and N mobilization remain largely untested, we examined direct and indirect pathways by which root exudates destabilize this nutrient pool in laboratory mesocosms. We simulated root exudation with 13 C-labeled oxalic acid to test whether root exudates are directly capable of mobilizing MAOM from mineral surfaces; and with 13 C-labeled glucose to test whether indirect stimulation of microbial and extracellular enzyme activity leads to MAOM decomposition. We also tested the potential for oxalic acid and glucose to mobilize MAOM in an additional subset of sterilized soils to clarify the potential for non-microbial pathways of MAOM destabilization. Over the course of the 12-day MAOM incubation with and without simulated exudates, we measured C cycling (CO 2 respiration rates, 13 C–CO 2 efflux), N cycling (inorganic N pools, gross N mineralization) and related microbial processes (enzyme activities and microbial community composition via phospholipid fatty acid analysis). Both of the simulated root exudates enhanced MAOM-C mineralization, with cumulative respiration increasing 35–89% relative to the water-only control. Likewise, glucose additions enhanced the production of an exo-cellulase and a chitinase by up to 130% and 39%, respectively, while oxalic acid enhanced oxidative enzyme activities up to 91% greater than control rates. We observed a positive association between glucose-induced shifts in enzyme activities, MAOM-C mineralization, and gross ammonification. Oxalic acid additions were associated with initial increases in fungal relative abundance and in sterile soils appeared to stimulate the release of metals and dissolved organic nitrogen into exchangeable pools. Our results indicate that common root exudates, like glucose and oxalic acid, can significantly increase the turnover and potential release of C and N from MAOM through indirect (e.g., enzyme induction) and direct (e.g., mobilization of metal oxides) mechanisms.

54 ENVIRONMENTAL SCIENCES↗

Comparison of direct and CO 2 -oxidative dehydrogenation of propane

Propane dehydrogenation to propylene has received increasing attention due to the fast growth in propylene demand and the exploration of shale gas containing propane. Direct dehydrogenation of propane (DDHP) offers high propylene selectivity but is limited by quick deactivation due to coke formation. CO 2 -assisted oxidative dehydrogenation of propane (CO 2 -ODHP) can consume CO 2 and meanwhile reduce coke deposition via the reverse Boudouard reaction. Here in the current review, direct and CO 2 -assisted dehydrogenation of propane has been compared from three aspects: reaction mechanisms, catalyst compositions, and CO 2 footprint analysis. As the average CO 2 emissions from electricity generation decrease due to the utilization of renewable energy, CO 2 -ODHP potentially leads to a net-negative CO 2 footprint while DDHP cannot.

58 GEOSCIENCES↗

Comparative environmental evaluation of construction waste management through different waste sorting systems in Hong Kong

Highlights: • Environmental performance of building CWM through different sorting systems was evaluated by LCA. • Environmental impacts of CWM systems depend on the composition of waste. • Significant environmental benefits are observed for CWM through on-site sorting system. • On-site sorting promotes materials recovery and reduces waste disposal into landfill sites. - Abstract: This study aimed to compare the environmental performance of building construction waste management (CWM) systems in Hong Kong. Life cycle assessment (LCA) approach was applied to evaluate the performance of CWM systems holistically based on primary data collected from two real building construction sites and secondary data obtained from the literature. Different waste recovery rates were applied based on compositions and material flow to assess the influence on the environmental performance of CWM systems. The system boundary includes all stages of the life cycle of building construction waste (including transportation, sorting, public fill or landfill disposal, recovery and reuse, and transformation and valorization into secondary products). A substitutional LCA approach was applied for capturing the environmental gains due to the utilizations of recovered materials. The results showed that the CWM system by using off-site sorting and direct landfilling resulted in significant environmental impacts. However, a considerable net environmental benefit was observed through an on-site sorting system. For example, about 18–30 kg CO{sub 2} eq. greenhouse gases (GHGs) emission were induced for managing 1 t of construction waste through off-site sorting and direct landfilling, whereas significant GHGs emission could be potentially avoided (considered as a credit −126 to −182 kg CO{sub 2} eq.) for an on-site sorting system due to the higher recycling potential. Although the environmental benefits mainly depend on the waste compositions and their sortability, the analysis conducted in this study can serve as guidelines to design an effective and resource-efficient building CWM system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Surge Block Method for Controlling Well Clogging and Sampling Sediment during Bioremediation

A surge block treatment method (i.e. inserting a solid rod plunger with a flat seal that closely fits the casing interior into a well and stocking it up and down) was performed for the rehabilitation of wells clogged with biomass and for the collection of time series sediment samples during in situ bioremediation tests for U(VI) immobilization at a the U.S. Department of Energy site in Oak Ridge, TN. The clogging caused by biomass growth had been controlled by using routine surge block treatment for18 times over a nearly four year test period. The treatment frequency was dependent of the dosage of electron donor injection and microbial community developed in the subsurface. Hydraulic tests showed that the apparent aquifer transmissivity at a clogged well with an inner diameter (ID) of 10.16 cm was increased by 8 13 times after the rehabilitation, indicating the effectiveness of the rehabilitation. Simultaneously with the rehabilitation, the surge block method was successfully used for collecting time series sediment samples composed of fine particles (clay and silt) from wells with ID 1.9 10.16 cm for the analysis of mineralogical and geochemical composition and microbial community during the same period. Our results demonstrated that the surge block method provided a cost-effective approach for both well rehabilitation and frequent solid sampling at the same location.

Wu, Wei-min↗

Integrated Two-Stage Alkaline–Oxidative Pretreatment of Hybrid Poplar. Part 2: Impact of Cu-Catalyzed Alkaline Hydrogen Peroxide Pretreatment Conditions on Process Performance and Economics

Two-stage alkaline/copper 2,2'-bipyridine-catalyzed alkaline hydrogen peroxide (Cu-AHP) pretreatment is an effective strategy for improving the enzymatic digestibility of hybrid poplar. To reduce the chemical inputs and processing costs associated with this process, we investigated the effect of increasing the temperature for both the alkaline pre-extraction and the Cu-AHP pretreatment stages. The results indicate that increasing the alkaline pre-extraction and the Cu-AHP pretreatment temperatures from 30 to 120 and 80 °C, respectively, allowed us to reduce both the pretreatment time of the Cu-AHP stage and the chemical loadings. Incubating alkaline pre-extracted hybrid poplar for 12 h with 10% NaOH (w/w biomass), 8% hydrogen peroxide (w/w biomass), and a Cu 2+ and 2,2'-bipyridine (bpy) concentration of 1 mM yielded monomeric sugar yields of approximately 77% glucose and 66% xylose (based on the initial sugar composition) following enzymatic hydrolysis. Technoeconomic analysis (TEA) indicates that these changes to the two-stage alkaline/Cu-AHP pretreatment process could potentially reduce the minimum fuel selling price (MFSP) by more than $\$1.00$ per gallon of biofuel compared to the reference case where both stages were conducted at 30 °C with higher chemical inputs.

09 BIOMASS FUELS↗

Mechanism of Methanol Synthesis on Cu through CO 2 and CO Hydrogenation

We present a comprehensive mean-field microkinetic model for the methanol synthesis and water-gas-shift (WGS) reactions that includes novel reaction intermediates, such as formic acid (HCOOH) and hydroxymethoxy (CH₃O₂) and allows for the formation of formic acid (HCOOH), formaldehyde (CH₂O), and methyl formate (HCOOCH₃) as byproducts. All input model parameters were initially derived from periodic, self-consistent, GGA-PW91 density functional theory calculations on the Cu(111) surface and subsequently fitted to published experimentalmethanol synthesis rate data, which were collected under realistic conditions on a commercial Cu/ZnO/Al₂O₃ catalyst. We find that the WGS reaction follows the carboxyl (COOH)-mediated path and that both CO and CO₂ hydrogenation pathways are active for methanol synthesis. Under typical industrial methanol synthesis conditions, CO₂ hydrogenation is responsible for ~2/3 of the methanol produced. The intermediates of the CO₂ pathway for methanol synthesis include HCOO*, HCOOH*, CH₃O₂*, CH₂O*, and CH₃O*. The formation of formate (HCOO*) from CO₂* and H* on Cu(111) does not involve an intermediate carbonate (CO₃*) species, and hydrogenation of HCOO* leads to HCOOH* instead of dioxymethylene (H₂CO₂*). The effect of CO is not only promotional; CO* is also hydrogenated in significant amounts to HCO*, CH₂O *, CH₃O*, and CH₃OH*. We considered two possibilities for CO promotion: (a) removal of OH* via COOH* to form CO₂ and hydrogen (WGS), and (b) CO-assisted hydrogenation of various surface intermediates, with HCO* being the H-donor. Only the former mechanism contributes to methanol formation, but its effect is small compared with that of direct CO hydrogenation to methanol. Overall, methanol synthesis rates are limited by methoxy (CH₃O*) formation at low CO₂/(CO+CO₂) ratios and by CH₃O* hydrogenation in CO₂-rich feeds. CH₃O* hydrogenation is the common slow step for both the CO and the CO₂ methanol synthesis routes; the relative contribution of each route is determined by their respective slow steps HCO*+H*→CH₂O*+* and HCOOH*+H*→CH₃O₂*+* as well as by feed composition and reaction conditions. An analysis of the fitted parameters for a commercial Cu/ZnO/Al₂O₃ catalyst suggests that a more open Cu surface, for example, Cu(110), Cu(100), and Cu(211) partially covered by oxygen, may provide a better model for the active site of methanol synthesis, but our studies cannot exclude a synergistic effect with the ZnO support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metagenomic and lipid analyses reveal a diel cycle in a hypersaline microbial ecosystem

Marine microbial communities experience daily fluctuations in light and temperature that can have important ramifications for carbon and nutrient cycling. Elucidation of such short time scale community-wide dynamics is hindered by system complexity. Hypersaline aquatic environments have lower species richness than marine environments and can be well-defined spatially, hence they provide a model system for diel cycle analysis. For this study, we conducted a 3-day time series experiment in a well-defined pool in hypersaline Lake Tyrrell, Australia. Microbial communities were tracked by combining cultivation-independent lipidomic, metagenomic and microscopy methods. The ratio of total bacterial to archaeal core lipids in the planktonic community increased by up to 58% during daylight hours and decreased by up to 32% overnight. However, total organism abundances remained relatively consistent over 3 days. Metagenomic analysis of the planktonic community composition, resolved at the genome level, showed dominance by Haloquadratum species and six uncultured members of the Halobacteriaceae . The post 0.8 μm filtrate contained six different nanohaloarchaeal types, three of which have not been identified previously, and cryo-transmission electron microscopy imaging confirmed the presence of small cells. Notably, these nano-sized archaea showed a strong diel cycle, with a pronounced increase in relative abundance over the night periods. We detected no eukaryotic algae or other photosynthetic primary producers, suggesting that carbon resources may derive from patchily distributed microbial mats at the sediment-water interface or from surrounding land. Results show the operation of a strong community-level diel cycle, probably driven by interconnected temperature, light abundance, dissolved oxygen concentration and nutrient flux effects.

59 BASIC BIOLOGICAL SCIENCES↗

Mechanistic insights into chemical and photochemical transformations of bismuth vanadate photoanodes

Artificial photosynthesis relies on the availability of semiconductors that are chemically stable and can efficiently capture solar energy. Although metal oxide semiconductors have been investigated for their promise to resist oxidative attack, materials in this class can suffer from chemical and photochemical instability. Here we present a methodology for evaluating corrosion mechanisms and apply it to bismuth vanadate, a state-of-the-art photoanode. Analysis of changing morphology and composition under solar water splitting conditions reveals chemical instabilities that are not predicted from thermodynamic considerations of stable solid oxide phases, as represented by the Pourbaix diagram for the system. Computational modelling indicates that photoexcited charge carriers accumulated at the surface destabilize the lattice, and that self-passivation by formation of a chemically stable surface phase is kinetically hindered. Although chemical stability of metal oxides cannot be assumed, insight into corrosion mechanisms aids development of protection strategies and discovery of semiconductors with improved stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elemental Zn and its Binding Protein Zinc-α2-Glycoprotein are Elevated in HPV-Positive Oropharyngeal Squamous Cell Carcinoma

Human papillomavirus (HPV)-positive head and neck squamous cell carcinoma (HNSCC) is biologically distinct from HPV-negative HNSCC. Outside of HPV-status, few tumor-intrinsic variables have been identified that correlate to improved survival. As part of exploratory analysis into the trace elemental composition of oropharyngeal squamous cell carcinoma (OPSCC), we performed elemental quanitification by X-ray fluorescence microscopy (XFM) on a small cohort (n = 32) of patients with HPV-positive and -negative OPSCC and identified in HPV-positive cases increased zinc (Zn) concentrations in tumor tissue relative to normal tissue. Subsequent immunohistochemistry of six Zn-binding proteins-zinc-alpha 2-glycoprotein (AZGP1), Lipocalin-1, Albumin, S100A7, S100A8 and S100A9-revealed that only AZGP1 expression significantly correlated to HPV-status (p < 0.001) and was also increased in tumor relative to normal tissue from HPV-positive OPSCC tumor samples. AZGP1 protein expression in our cohort significantly correlated to a prolonged recurrence-free survival (p = 0.029), similar to HNSCC cases from the TCGA (n = 499), where highest AZGP1 mRNA levels correlated to improved overall survival (p = 0.023). By showing for the first time that HPV-positive OPSCC patients have increased intratumoral Zn levels and AZGP1 expression, we identify possible positive prognostic biomarkers in HNSCC as well as possible mechanisms of increased sensitivity to chemoradiation in HPV-positive OPSCC.

60 APPLIED LIFE SCIENCES↗

Quinonoid vs. aromatic structures of heteroconjugated polymers from oligomer calculations

Conjugated polymers with quinonoid ground states can display low optical band gaps. The design of novel conjugated polymers with quinonoid ground states offers insights into the relative stabilities of aromatic vs. quinonoid structures. In this work, we present parameters such as the quinonoid (Q)/aromatic (A) energy difference, the band gap, and the C–C distances between the repeat units. This study reveals eight new polymers which exist in quinonoid ground state among twenty-nine polymers of varying structural composition that were subject to analysis. We expect that copolymerizing such quinonoid ground state monomers with aromatic ground state monomers will modulate the bandgap of the resulting polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-ray photoelectron spectroscopy analysis of TlInGaAsN semiconductor system and their annealing-induced structural changes

TlInGaAsN thin films grown by gas-source molecular-beam epitaxy were investigated by x-ray photoelectron spectroscopy (XPS) to analyze the Tl incorporation and to study the annealing-induced transformation of the atomic configurations. XPS analysis revealed that the Tl composition in the grown TlInGaAsN is around 1.5% and that the dominant atomic configuration of the TlInGaAsN changes from the In-As and Ga-N bonds to the In-N and Ga-As bonds by 700 deg. C rapid thermal annealing. High-resolution x-ray diffraction and reciprocal space mapping measurements showed that no significant out-diffusion of the elements occurs in the TlInGaAsN/TlGaAsN quantum wells (QWs) even after the same annealing. It is concluded that the blueshift in the photoluminescence peak for the TlInGaAsN/TlGaAsN QWs after annealing is attributed to the transformation of the atomic configuration in TlInGaAsN.

36 MATERIALS SCIENCE↗

Dielectric breakdown properties of SF{sub 6}-N{sub 2} mixtures at 0.01-1.6 MPa and 300-3000 K

The dielectric breakdown properties of SF{sub 6}-N{sub 2} mixtures were investigated at different concentrations of N{sub 2}, 0.01-1.6 MPa, and 300-3000 K. The equilibrium compositions of different SF{sub 6}-N{sub 2} mixtures at several gas pressures and temperatures up to 3000 K were first calculated by minimizing the Gibbs free energy under the assumptions of local thermodynamic and chemical equilibrium. The electron energy distribution function was then obtained using the composition data by Boltzmann equation analysis. It was found that adding N{sub 2} to SF{sub 6} gas can markedly reduce the kinetic energy of electrons at relatively high gas temperatures, which enhances the dielectric field strength. Finally, the critical reduced electric field (E/N){sub cr}, defined as the value for which ionization is equal to attachment, of hot SF{sub 6}-N{sub 2} mixtures was determined. The results indicate that in the gas temperature range around 2000-3000 K, increasing the concentration of N{sub 2} effectively enhances the (E/N){sub cr} of SF{sub 6}-N{sub 2} mixtures, and the (E/N){sub cr} of SF{sub 6}-N{sub 2} mixtures at a wide range of concentrations of N{sub 2} (5%, 50%, and 95%) are all higher than that of pure SF{sub 6} gas. Further, this trend exists at all the gas pressures considered (0.01-1.6 MPa).

36 MATERIALS SCIENCE↗

Fundamental limitation to the magnitude of piezoelectric response of (001)pc textured K0.5Na0.5NbO3 ceramic

(001)pc textured K0.5Na0.5NbO3 (KNN) ceramic was found to exhibit a 65% improvement in the longitudinal piezoelectric response as compared to its random counterpart. Piezoresponse force microscopy study revealed the existence of larger 180 and non-180 domains for textured ceramic as compared to that of the random ceramic. Improvement in piezoresponse by the development of (001)pc texture is discussed in terms of the crystallographic nature of KNN and domain morphology. A comparative analysis performed with a rhombohedral composition suggested that the improvement in longitudinal piezoresponse of polycrystalline ceramics by the development of (001)pc texture is limited by the crystal structure.

Gupta, Shashaank↗