Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Overview of ASDEX Upgrade results

Here, the ASDEX Upgrade (AUG) programme is directed towards physics input to critical elements of the ITER design and the preparation of ITER operation, as well as addressing physics issues for a future DEMO design. Since 2015, AUG is equipped with a new pair of 3-strap ICRF antennas, which were designed for a reduction of tungsten release during ICRF operation. As predicted, a factor two reduction on the ICRF-induced W plasma content could be achieved by the reduction of the sheath voltage at the antenna limiters via the compensation of the image currents of the central and side straps in the antenna frame. There are two main operational scenario lines in AUG. Experiments with low collisionality, which comprise current drive, ELM mitigation/suppression and fast ion physics, are mainly done with freshly boronized walls to reduce the tungsten influx at these high edge temperature conditions. Full ELM suppression and non-inductive operation up to a plasma current of ${{I}_{\text{p}}}=0.8$ MA could be obtained at low plasma density. Plasma exhaust is studied under conditions of high neutral divertor pressure and separatrix electron density, where a fresh boronization is not required. Substantial progress could be achieved for the understanding of the confinement degradation by strong D puffing and the improvement with nitrogen or carbon seeding. Inward/outward shifts of the electron density profile relative to the temperature profile effect the edge stability via the pressure profile changes and lead to improved/decreased pedestal performance. Seeding and D gas puffing are found to effect the core fueling via changes in a region of high density on the high field side (HFSHD).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SOLAR TRANSITION REGION LINES OBSERVED BY THE INTERFACE REGION IMAGING SPECTROGRAPH: DIAGNOSTICS FOR THE O IV AND Si IV LINES

The formation of the transition region O IV and Si IV lines observable by the Interface Region Imaging Spectrograph (IRIS) is investigated for both Maxwellian and non-Maxwellian conditions characterized by a κ-distribution exhibiting a high-energy tail. The Si IV lines are formed at lower temperatures than the O IV lines for all κ. In non-Maxwellian situations with lower κ, the contribution functions are shifted to lower temperatures. Combined with the slope of the differential emission measure, it is possible for the Si IV lines to be formed at very different regions of the solar transition region than the O IV lines; possibly close to the solar chromosphere. Such situations might be discernible by IRIS. It is found that photoexcitation can be important for the Si IV lines, but is negligible for the O IV lines. The usefulness of the O IV ratios for density diagnostics independently of κ is investigated and it is found that the O IV 1404.78 Å/1399.77 Å ratio provides a good density diagnostics except for very low T combined with extreme non-Maxwellian situations.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiparameter Estimation in Networked Quantum Sensors

We introduce a general model for a network of quantum sensors, and we use this model to consider the question: When can entanglement between the sensors, and/or global measurements, enhance the precision with which the network can measure a set of unknown parameters? We rigorously answer this question by presenting precise theorems proving that for a broad class of problems there is, at most, a very limited intrinsic advantage to using entangled states or global measurements. Moreover, for many estimation problems separable states and local measurements are optimal, and can achieve the ultimate quantum limit on the estimation uncertainty. This immediately implies that there are broad conditions under which simultaneous estimation of multiple parameters cannot outperform individual, independent estimations. Our results apply to any situation in which spatially localized sensors are unitarily encoded with independent parameters, such as when estimating multiple linear or non-linear optical phase shifts in quantum imaging, or when mapping out the spatial profile of an unknown magnetic field. We conclude by showing that entangling the sensors can enhance the estimation precision when the parameters of interest are global properties of the entire network.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Novel Controls for Time-Dependent Economic Dispatch of Combined Cooling Heating and Power (CCHP)

The research and development effort detailed in this report directly addresses the challenge of reducing U.S. industrial energy and carbon intensity by contributing to an increased understanding of potential CCHP technology, the CCHP market and the challenges of widespread adoption. This study developed a number of new tools, models, and approaches for the design, control, and optimal dispatch of various CCHP technologies. The UC Irvine campus served as a ‘living laboratory’ of new CCHP technologies and enabled the design and demonstration of several novel control methods. In particular, the integration of large scale thermal energy storage capable of shifting an entire day of cooling demand required a novel approach to the CCHP dispatch optimization. The thermal energy storage proved an economically viable resource which reduced both costs and emissions by enabling generators and chillers to operate under steady high efficiency conditions at all times of the day.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The Russian Invasion of Ukraine and Nuclear Security

You have in your hands a unique publication. Voices of Ukraine is a collection of testimonies from people working in the nuclear and radioactive source sector in Ukraine. The five texts in this extract are a preview of the full volume that will be published in early 2023. The accounts presented in this extract are very different from the newspaper articles or reports you may have read about the Russian invasion of Ukraine and the attack on and occupation of the Chornobyl Exclusion Zone and Zaporizhzhia NPP. Five people share their own stories of the personal and professional dilemmas they faced: How to endure an unending shift under enemy occupation when replacement workers weren’t permitted to relieve the staff; whether to remain in your childhood home or to flee abroad; how to support your community and country while maintaining the safe operation of nuclear sites in wartime conditions? The narratives of these individuals have far-reaching consequences for the nuclear sector in Ukraine but also far beyond it.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

CRUD Modeling in MPACT

One of the challenge problems in CASL is to better understand the effects of CRUD on PWRs. One of the primary focuses of the CRUD work this year is the ability to simulate CRUD Induced Power Shift (CIPS). In order to meet this requirement, VERA-CS is being modified in order to model the space and time dependent deposition of CRUD onto the fuel and capture the effects it has on the local power and thermal hydraulic conditions in the core.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The Ionization Constants of DCO{sub 3}{sup -} and DPO{sub 4}{sup 2-} under Candu Reactor Primary Coolant Conditions by Raman Spectroscopy

The ionization constants of bicarbonate and hydrogen phosphate have been measured in light and heavy water up to 325 deg. C using Raman spectroscopy. Ionization constants in heavy water at temperatures above 100 deg. C have been measured for very few acids and bases. Together with other results, this work will be used to develop and verify models of the deuterium isotope effect on oxide solubilities in Candu reactor primary coolant. A custom-built titanium/sapphire flow cell was paired with a Horiba Jobin Yvon HR800 LabRAM system to collect Raman spectra of aqueous solutions under Candu primary coolant temperatures. The temperature-controlled cell is made of materials that are relatively inert under the extreme experimental conditions required for hydrothermal studies. Raman spectra were collected with detector polarizations parallel and perpendicular to the laser polarization. These were subtracted and corrected to obtain the reduced isotropic spectrum, which contains only symmetric vibrations, has a flat baseline, and has peak areas proportional to species concentration. Vibrational modes involving deuterium are shifted to lower wavenumbers in heavy water due to the increased mass of deuterium over hydrogen. The speciation between the two solvents is also measurably different. The relative concentration of the acidic species in solution increases with temperature, making its peaks easier to fit at high temperatures. The Raman band positions shift to lower wavenumbers with increasing temperature because the hydrogen bonding in bulk water begins to break down, which strengthens hydrogen bonding to the ions. The basic equilibrium constants were determined from the concentration of each species in solution combined with an activity coefficient model. A simplified form of the 'density' model was then fitted to the data. These fit results were combined with literature values of pK{sub w} in light and heavy water to determine the pK{sub a} values at saturation vapor pressure. The experimental results show excellent agreement with known literature values in light water where they exist at lower temperatures. These equilibrium constants are the first to be reported for both chemical systems in heavy water above 25 deg. C. This work extends the equilibrium constants in H{sub 2}O: - For HCO{sub 3}{sup -} from 250 deg. C to 325 deg. C; - For HPO{sub 4}{sup 2-} from 50 deg. C to 300 deg. C. These are the first ever ionization constants in D{sub 2}O for DPO{sub 4}{sup 2-} and the first values above 25 deg. C for DCO{sub 3}{sup -}. These results will be used to develop predictive models for the deuterium isotope effect on activated corrosion product transport under Candu nuclear reactor primary coolant conditions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Start current of dielectric-loaded grating in Smith-Purcell radiation

In this paper, a three-dimensional dielectric loaded grating (DLG) is proposed for the Smith-Purcell (SP) device. Taking into the considerations of thickness and width of electron beam, the dispersion equation is derived by using field matches method. The complex frequency is obtained by the numerical solution of dispersion equation, in which the imaginary part represents linear growth rate. The impacts of the electron beam filling factor (EBFF) on growth rate are discussed under the condition that the beam current and beam current density are kept as constants, respectively. In addition, the start current for SP oscillator is obtained by using the dispersion relation combined with boundary conditions. The relationship between the start current and other parameters is discussed and compared with the conventional metal grating. The results show that with the increasing of EBFF, the peak growth rate increases rapidly firstly and then decreases slowly, in which the current and current density are kept as constants, respectively. For the SP oscillator, the start current is increased with the shifting up beam voltage, but it is decreased with the improved EBFF, and only it has a slightly increasing trend when EBFF is close to 1. In addition, the start current is decreased with the increasing of relative dielectric constant, which indicates that by introducing DLG, the start current can be effectively reduced. Theoretical results are in good agreement with that of the simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Traffic safety analysis and model updating for freeways using Bayesian method

Freeway crash prediction models are the basic of traffic safety research, yet crash occurrence and the influencing factors change over time. In order to make sure the implemented safety models fit the current traffic environment, this study conducts a comparative analysis of 2017 and 2020 datasets collected from freeways in Suzhou, China. Herein, considering the spatial correlation among analysis units and the hierarchical data structure, a Bayesian conditional autoregressive negative binomial (CAR-NB) model and a Bayesian hierarchical CAR-NB (HCAR-NB) model were used to explore the safety influencing factors, and a traditional NB model was developed for further comparison. To update the HCAR-NB model from 2017 to 2020, Bayesian inference with informative priors was used to improve its goodness of fit and efficiency. Preliminary results showed that 1) the HCAR-NB model outperformed the NB model and CAR-NB model in prediction accuracy, and 2) the number of crashes was significantly correlated with average speed, speed variance, road segment length, number of lanes, and presence of ramps. The potential for safety improvement (PSI) method was applied to the modeling results to identify hotspots for the two years. The results confirmed that the hotspots spatiotemporally shifted among the freeways. The proposed crash prediction model and updating method are expected to assist implementation of informed countermeasures for freeway safety improvement.

97 MATHEMATICS AND COMPUTING↗

Study of Influence of Electrode Geometry on Impedance Spectroscopy

Electrochemical Impedance Spectroscopy (EIS) is a powerful and proven tool for analyzing AC impedance response. A conventional three electrode EIS method was used to perform the investigation in the present study. Saturated potassium chloride solution was used as the electrolyte and three different material rods were used as working electrodes. Different configurations of electrode area were exposed to the electrolyte as an active area to investigate electrode geometry effects. Counter to working electrode distance was also altered while keeping the working electrode effective area constant to explore the AC response dependence on the variation of ion travel distance. Some controlled experiments were done to validate the experimental setup and to provide a control condition for comparison with experimental results. A frequency range of 100 mHz to 1 MHz was used for all experiments. In our analysis, we have found a noteworthy influence of electrode geometry on AC impedance response. For all electrodes, impedance decreases with the increase of effective area of the electrolyte. High frequency impedance is not as dependent on geometry as low frequency response. The observed phase shift angle drops in the high frequency region with increased working electrode area, whereas at low frequency the reverse is true. Resistance and capacitive reactance both decrease with an increase of area, but resistance response is more pronounce than reactance. For lower frequencies, small changes in working area produce very distinctive EIS variations. Electrode material as well as geometry was systematically varied in the present study. From these and other studies, we hope to develop a fundamental foundation for understanding specific changes in local geometry in fuel cell (and other) electrodes as a method of designing local morphology for specific performance.

30 DIRECT ENERGY CONVERSION↗

Effect of cooling conditions on microstructure and mechanical properties of friction stir welded 7055 aluminium alloy joints

Highlights: • Water cooling improves tensile properties of friction stir welded 7055 Al alloy. • Water cooling results in smaller grains and second phase in nugget zone. • Water cooling results in finer second phase in thermos-mechanically affected zone. • Water cooling results in finer second phase in heat affected zone. • Fracture surface is flat for air-cooled joint but zig-zag for water-cooled one. - Abstract: The microstructure and mechanical properties of friction stir welded 7055 aluminium alloy under air cooling and water cooling were investigated by means of hardness and tensile testing, optical microscopy and transmission electron microscopy. Water cooling results in reduced softening in the weld zone and therefore higher tensile strength compared to air cooling. Fracture generally occurs within the thermo-mechanically affected zone (TMAZ) and heat affected zone (HAZ) on the retreating side in joints welded under air cooling but shifts towards the TMAZ and nugget zone (NZ) in the joints welded under water cooling. The fracture surfaces are generally flat for the air-cooled joint, but exhibits a zig-zag feature for the water-cooled joint. The mechanical behaviour of the weld has been discussed in light of the change in grain structure and precipitation in the NZ, TMAZ and HAZ caused by cooling conditions.

36 MATERIALS SCIENCE↗

In Situ Dispersion of Palladium on TiO 2 During Reverse Water–Gas Shift Reaction: Formation of Atomically Dispersed Palladium

The application of single-atom catalysts (SACs) to high-temperature hydrogenation requires materials that thermodynamically favor metal atom isolation over cluster formation. Here, we show that Pd can be predominantly dispersed as isolated atoms onto TiO 2 during the reverse water-gas shift (rWGS) reaction at 400 °C. Achieving atomic dispersion requires an artificial increase of the absolute TiO 2 surface area by an order of magnitude and can be accomplished by physically mixing a precatalyst (Pd/TiO 2 ) with neat TiO 2 prior to the rWGS reaction. Furthermore, the in situ dispersion of Pd was reflected through a continuous increase of rWGS activity over 92 h and supported by kinetic analysis, infrared and X-ray absorption spectroscopies and scanning transmission electron microscopy. The thermodynamic stability of Pd under high-temperature rWGS conditions is associated with Pd-Ti coordination, which manifests upon O-vacancy formation and the artificial increase in TiO 2 surface area.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of CeO{sub 2} NPs on biological phosphorus removal and bacterial community shifts in a sequencing batch biofilm reactor with the differential effects of molecular oxygen

The effects of CeO{sub 2} nanoparticles (CeO{sub 2} NPs) on a sequencing batch biofilm reactor (SBBR) with established biological phosphorus (P) removal were investigated from the processes of anaerobic P release and aerobic P uptake. At low concentration (0.1 mg/L), no significant impact was observed on total phosphorus (TP) removal after operating for 8 h. However, at a concentration of 20 mg/L, TP removal efficiency decreased from 83.68% to 55.88% and 16.76% when the CeO{sub 2} NPs were added at the beginning of the anaerobic and aerobic periods, respectively. Further studies illustrated that the inhibition of the specific P release rate was caused by the reversible states of Ce{sup 3+} and Ce{sup 4+}, which inhibited the activity of exopolyphosphatase (PPX) and transformation of poly-β-hydoxyalkanoates (PHA) and glycogen, as well as the uptake of volatile fatty acids (VFAs). The decrease in the specific P uptake rate was mainly attributed to the significantly suppressed energy generation and decreased abundance of Burkholderia caused by excess reactive oxygen species. The removal of chemical oxygen demand (COD) was not influenced by CeO{sub 2} NPs under aerobic conditions, due to the increased abundance of Acetobacter and Acidocella after exposure. The inhibitory effects of CeO{sub 2} NPs with molecular oxygen were reduced after anaerobic exposure due to the enhanced particle size and the presence of Ce{sup 3+}. - Highlights: • CeO{sub 2} NPs (20 mg/L) had a notable toxicity effect on P removal in SBBR system. • The deteriorated SPRR was caused by the inhibited key enzyme activity (PPX). • The decreased SPUR was caused by the bacterial community shifts. • Ce ions converting and excess ROS generation are related toxicity mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Riverine bacterioplankton and phytoplankton assembly along an environmental gradient induced by urbanization

In the Anthropocene, human activities are intensifying stresses on biological communities across ecosystems. Knowledge on how environmental changes influence microbial community dynamics is crucial but currently limited. Here we unraveled ecological processes generating distribution patterns of bacterioplankton and phytoplankton communities in a river draining an urbanizing watershed in southern China. In this ecosystem, longitudinal environmental heterogeneity and directional flow potentially have counteracting effects on planktonic community assembly. Using simultaneously multiple approaches, we showed that the observed compositional patterns result from an interplay of stochastic and deterministic processes, indicating that dispersal via fluvial connectivity could not override local selective pressures. Successional shifts in the relative importance of the above processes were associated with trends in climatic factors. High diversity was observed at the intermediate levels of ecological processes alongside intense inter-species interactions maintained by a few keystone taxa. Altogether, interactions between climatic conditions, landscape and hydrology control plankton community dynamics.

54 ENVIRONMENTAL SCIENCES↗

Minimum shift keying based protection mode capable wavelength division multiplexed passive optical network optical overlay system

We explored the functioning of an optical overlay of multicast and unicast data streams on a survival wavelength division multiplexed passive optical network using intensity and minimum shift keying modulation for both single and multiuser. In optical line terminal, using a sinusoidal clock, optical subcarriers are generated not only to carry the multicast and unicast data streams simultaneously but also in case of fiber failure, protection mode is enabled to carry the data streams smoothly. Here, 10 Gbps downstream multicast in normal mode and unicast signals both in normal and protection mode are transmitted error-free through 30 km dispersion shifted fiber. In both the cases 10 Gbps upstream signal is modulated and sent back to the optical line terminal. For single user nearly similar power penalty is witnessed for downstream unicast as well as re-modulated upstream data in both the conditions and also when multicast data is disabled. The power penalties between single and multiuser for both the modes are found to be approximately 0.06, 0.42 and 0.7 dB for unicast MSK, multicast and upstream respectively.

36 MATERIALS SCIENCE↗

Microcystin-LR aerosol induces inflammatory responses in healthy human primary airway epithelium

Harmful algal blooms plague bodies of freshwater globally. These blooms are often composed of outgrowths of cyanobacteria capable of producing the heptapeptide Microcystin-LR (MC-LR) which is a well-known hepatotoxin. Recently, MC-LR has been detected in aerosols generated from lake water. However, the risk for human health effects due to MC-LR inhalation exposure have not been extensively investigated. In this study, we exposed a fully differentiated 3D human airway epithelium derived from 14 healthy donors to MC-LR-containing aerosol for 3 minutes per day for 3 days. Concentrations of MC-LR ranged from 100 pM to 1 µM. Although there were little to no detrimental alterations in measures of the airway epithelial function (i.e. cell survival, tissue integrity, mucociliary clearance, or cilia beating frequency), a distinct shift in the transcriptional activity was found. Genes related to inflammation were found to be upregulated such as C-C motif chemokine 5 (CCL5; log2FC = 0.56 , p = 0.02) and C-C chemokine receptor type 7 (CCR7; log2FC = 0.83, p = 0.03). Functionally, conditioned media from MC-LR exposed airway epithelium was also found to have significant chemo-attractive properties for primary human neutrophils. Additionally, increases were found in the concentration of secreted chemokine proteins in the conditioned media such as CCL1 (log2FC = 5.07 , p = 0.0001) and CCL5 (log2FC = 1.02, p = 0.046). These results suggest that MC-LR exposure to the human airway epithelium is capable of inducing an inflammatory response that may potentiate acute or chronic disease.

3D human airway epithelium↗

Preservation of higher Fe[II] content in borosilicate glass by microwave irradiation in air

Highlights: • Higher Fe[II] absorption within 1000–1200 nm in UV-vis-NIR spectra in microwave (MW) melted glass. • Spectrophotometric methods confirm higher Fe-redox ratio in MW melted glass. • Thermogravimetric analysis (TGA) recorded more weight gain signifying higher stabilisation of Fe[II] in MW melted glass. • Fe 2p{sub 3/2} peak in XPS demonstrates presence of higher FeO concentration in MW glass. • Slow conversation of Fe[II] to Fe[III] in MW heating influencing retention of higher Fe[II]. - Abstract: Existence of high Fe[II] content in glass is a perquisite for achieving high heat absorption property in glass. Present study investigates the capability of microwave (MW) irradiation in retention of higher Fe[II] in glass eliminating the stringent reducing atmosphere requirements in conventional heating. Stabilisation of higher Fe[II] in glass under influence of MW irradiation has been demonstrated, measuring absorbance at >1000 nm in UV–vis-NIR spectra, maintaining identical conditions in MW and in conventional heating. Spectrophotometric methods developing color complex of Fe{sup 2+} with ferrozine and 1, 10 ortho-phenanthroline are used to confirm higher content of Fe[II]. Further, more weight gain in thermo gravimetric analysis, higher isomer shift (>0.89 mm/s) with more relative absorption (% area) for Fe[II] in Mössbauer spectroscopy, and shifting of Fe 2p{sub 3/2} peak in X-ray photoelectron spectroscopy towards lower binding energy further confirm retention of higher FeO under MW irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Combined Experimental and Computational Study on the Unimolecular Decomposition of JP-8 Jet Fuel Surrogates. I. n-Decane (n-C 10 H 22 )

Exploiting a high temperature chemical reactor, we explored in this paper the pyrolysis of helium-seeded n-decane as a surrogate of the n-alkane fraction of Jet Propellant-8 (JP-8) over a temperature range of 1100–1600 K at a pressure of 600 Torr. The nascent products were identified in situ in a supersonic molecular beam via single photon vacuum ultraviolet (VUV) photoionization coupled with a mass spectroscopic analysis of the ions in a reflectron time-of-flight mass spectrometer (ReTOF). Our studies probe, for the first time, the initial reaction products formed in the decomposition of n-decane—including radicals and thermally labile closed-shell species effectively excluding mass growth processes. The present study identified 18 products: molecular hydrogen (H 2 ), C2 to C7 1-alkenes [ethylene (C 2 H 4 ) to 1-heptene (C 7 H 14 )], C1–C3 radicals [methyl (CH 3 ), vinyl (C 2 H 3 ), ethyl (C 2 H 5 ), propargyl (C 3 H 3 ), allyl (C 3 H 5 )], small C1–C3 hydrocarbons [methane (CH 4 ), acetylene (C 2 H 2 ), allene (C 3 H 4 ), methylacetylene (C 3 H 4 )], along with higher-order reaction products [1,3-butadiene (C 4 H 6 ), 2-butene (C 4 H 8 )]. On the basis of electronic structure calculations, n-decane decomposes initially by C–C bond cleavage (excluding the terminal C–C bonds) producing a mixture of alkyl radicals from ethyl to octyl. These alkyl radicals are unstable under the experimental conditions and rapidly dissociate by C–C bond β-scission to split ethylene (C 2 H 4 ) plus a 1-alkyl radical with the number of carbon atoms reduced by two and 1,4-, 1,5-, 1,6-, or 1,7-H shifts followed by C–C β-scission producing alkenes from propene to 1-octene in combination with smaller 1-alkyl radicals. The higher alkenes become increasingly unstable with rising temperature. When the C–C β-scission continues all the way to the propyl radical (C 3 H 7 ), it dissociates producing methyl (CH 3 ) plus ethylene (C 2 H 4 ). Also, at higher temperatures, hydrogen atoms can abstract hydrogen from C 10 H 22 to yield n-decyl radicals, while methyl (CH 3 ) can also abstract hydrogen or recombine with hydrogen to form methane. Finally, these n-decyl radicals can decompose via C–C-bond β-scission to C3 to C9 alkenes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗