Search NASA⌕ Search

SEARCH · Search NASA

Results for “finite difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Thermocapillary convection in a liquid bridge

Results from experiments on thermocapillary flow in a vertical liquid bridge are reported. Data on surface velocities are presented for four different silicone oils at several values of the temperature difference across the liquid bridge and for three different average temperatures. Also, axial velocity measured as a function of radial position in the bridge is reported. A theoretical model of the velocity and temperature fields in the system is formulated and solved by finite differences. The experimental data on surface velocities are nondimensionalized, and are found to collapse on a single line when plotted against the Marangoni number. Scaled velocities are relatively insensitive to changes in the value of the Marangoni number from 20 to 290, and the Prandtl number from 1460 to 7120. The data are in reasonable accord with predictions from theory.

Mcneil, Thomas J.↗

Evaluation of finite element formulations for transient conduction forced-convection analysis

Numerical studies clarifying the advantages and disavantages of conventional versus upwind convective finite elements are presented along with lumped versus consistent formulations for practical conduction forced-convection analysis. A finite-element procedure for treatment of negligible capacitance fluid nodes is presented. The procedure is based on procedures used in finite-element structural dynamics to treat nodes with negligible structural mass. Two finite-element programs and a finite-difference lumped-parameter program used in the studies are discussed. Evaluation studies utilizing three convection and two combined conduction-convection problems are then presented and discussed. Additionally, the computational time saving offered by the finite element procedure is considered for a practical combined conduction-convection problem.

Thornton, E. A.↗

Boundary conditions in Chebyshev and Legendre methods

Two different ways of treating non-Dirichlet boundary conditions in Chebyshev and Legendre collocation methods are discussed for second order differential problems. An error analysis is provided. The effect of preconditioning the corresponding spectral operators by finite difference matrices is also investigated.

Canuto, C.↗

A 3D-PNS computer code for the calculation of supersonic combusting flows

A computer code has been developed based on the three-dimensional parabolized Navier-Stokes (PNS) equations which govern the supersonic combusting flow of the hydrogen-air system. The finite difference algorithm employed was a hybrid of the Schiff-Steger algorithm and the Vigneron, et al., algorithm which is fully implicit and fully coupled. The combustion of hydrogen and air was modeled by the finite-rate two-step combustion model of Rogers-Chinitz. A new dependent variable vector was introduced to simplify the numerical algorithm. Robustness of the algorithm was considerably enhanced by introducing an adjustable parameter. The computer code was used to solve a premixed shock-induced combustion problem and the results were compared with those of a full Navier-Stokes code. Reasonably good agreement was obtained at a fraction of the cost of the full Navier-Stokes procedure.

Chitsomboon, Tawit↗

Characterization of Finite Ground Coplanar Waveguide with Narrow Ground Planes

Coplanar waveguide with finite width ground planes is characterized through measurements, conformal mapping, and the Finite Difference Time Domain (FDTD) technique for the purpose of determining the optimum ground plane width. The attenuation and effective permittivity of the lines are related to its geometry. It is found that the characteristics of the Finite Ground Coplanar line (FGC) are not dependent on the ground plane width if it is greater than twice the center conductor width, but less than lambda(sub d)/8. In addition, electromagnetic field plots are presented which show for the first time that electric fields in the plane of the substrate terminate on the outer edge of the ground plane, and that the magnitude of these fields is related to the ground plane width.

Ponchak, George E.↗

Design of all-optical XOR and XNOR logic gates based on Fano resonance in plasmonic ring resonators

In this paper, compact all-optical XOR and XNOR gates based on different configurations of metal–insulator–metal plasmonic ring resonators (PRRs) have been proposed. Square and octagon-shaped rings have been used in this case. The logic gates have been simulated using the two-dimensional finite-difference time-domain numerical method, with a conventional perfectly matched layer as the absorbing boundary condition of the area under simulation. The phenomenon of Fano resonance is employed by the proposed gates to excite ON/OFF states. As a result, a large value of contrast ratio (C.R.) is obtained. The results show that the values of C.R. of XNOR and XOR gates for square-shaped PRR are 22.66 and 22.9 dB, respectively and the values of C.R. of XNOR and XOR gates for octagon-shaped PRR are 23.01 and 23.52 dB, respectively. Also, it is shown that the octagon-shaped gates have higher transmission ratios than other proposed configurations. The proposed optical logic gates can be used as key components in optical communications and for designing compact plasmonic devices.

42 ENGINEERING↗

Advanced rotor computations with a corrected potential method

An unsteady Full-Potential Rotor code (FPR) has been enhanced with modifications directed at improving its drag prediction capability. The potential code has been rewritten with modifications to increase the code accuracy. Also, the shock generated entropy has been included to provide solutions comparable to the Euler equations. Two different weakly interacted boundary layer models have also been coupled to FPR in order to estimate skin-friction drag. One is a two-dimensional integral method and the other is a three-dimensional finite-difference scheme. The new flow solver is able to find accurate inviscid drags without recourse to numerical error tares. This permits the resolution of drag distributions resulting from rotor geometric variations. Good comparisons have been obtained between computed and measured torque for a rectangular and a highly swept model rotor.

Bridgeman, John O.↗

Topographically driven crustal flow and its implication to the development of pinned oroclines

Pinned oroclines, a type of curved orogen which results from lateral pinning of a growing fold-thrust belt, tend to resemble parabolic Newtonian curvature modified by different degrees of flattening at the flow front. It is proposed that such curves can be generated by Newtonian crustal flow driven by topographic variations. In this model, regional topographic differences create a regional flow which produces a parabolic flow front on interaction with lateral bounding obstacles. Local topographic variations modify the parabolic curves and yield more flat-crested, non-Newtonian-type curvatures. A finite-difference thin-skin tectonic simulation demonstrates that both Newtonian and non-Newtonian curved orogens can be produced within a Newtonian crust.

Hsui, Albert T.↗

Fast, Conservative Algorithm for Solving the Transonic Full-Potential Equation

A fast, fully implicit approximate factorization algorithm designed to solve the conservative, transonic, full-potential equation in either two or three dimensions is described. The algorithm uses an upwind bias of the density coefficient for stability in supersonic regions. This provides an effective upwind difference of the streamwise terms for any orientation of the velocity vector (i.e., rotated differencing), thereby greatly enhancing the reliability of the present algorithm. A numerical transformation is used to establish an arbitrary body-fitted, finite-difference mesh. Computed results for both airfoils and simplified wings demonstrate substantial improvement in convergence speed for the new algorithm relative to standard successive-line over-relaxation algorithms.

Holst, Terry L.↗

A fast, conservative algorithm for solving the transonic full-potential equation

A fast, fully implicit approximate factorization (AF) algorithm designed to solve the conservative transonic full-potential equation in either two or three dimensions is described. The algorithm uses an upwind bias of the density coefficient for stability in supersonic regions. This provides an effective upwind difference of the streamwise terms for any orientation of the velocity vector (i.e., 'rotated differencing'), and thereby greatly enhances the reliability of the present algorithm. A numerical transformation is used to establish an arbitrary body-fitted finite-difference mesh. Computed results for both airfoils and simplified wings demonstrate substantial improvement in convergence speed for the new algorithm relative to standard successive-line overrelaxation algorithms.

Holst, T. L.↗

Numerical studies of interacting vortices

To get a basic understanding of the physics of flowfields modeled by vortex filaments with finite vortical cores, systematic numerical studies of the interactions of two dimensional vortices and pairs of coaxial axisymmetric circular vortex rings were made. Finite difference solutions of the unsteady incompressible Navier-Stokes equations were carried out using vorticity and stream function as primary variables. Special emphasis was placed on the formulation of appropriate boundary conditions necessary for the calculations in a finite computational domain. Numerical results illustrate the interaction of vortex filaments, demonstrate when and how they merge with each other, and establish the region of validity for an asymptotic analysis.

Liu, G. C.↗

Numerical studies of interacting vortices

To get a basic understanding of the physics of flowfields modeled by vortex filaments with finite vortical cores, systematic numerical studies of the interactions of two vortices and pairs of coaxial axisymmetric circular vortex rings were made. Finite difference solutions of the unsteady incompressible Navier-Stokes equations were carried out using vorticity and stream function as primary variables. Special emphasis was placed on the formulation of appropriate boundary conditions necessary for the calculations in a finite computational domain. Numerical results illustrate the interaction of vortex filaments, demonstrate when and how they merge with each other, and establish the region of validity for an asymptotic analysis.

Liu, G. C.↗

Performance Modeling of an Experimental Laser Propelled Lightcraft

A computational plasma aerodynamics model is developed to study the performance of an experimental laser propelled lightcraft. The computational methodology is based on a time-accurate, three-dimensional, finite-difference, chemically reacting, unstructured grid, pressure- based formulation. The underlying physics are added and tested systematically using a building-block approach. The physics modeled include non-equilibn'um thermodynamics, non-equilibrium air-plasma finite-rate kinetics, specular ray tracing, laser beam energy absorption and equi refraction by plasma, non-equilibrium plasma radiation, and plasma resonance. A series of transient computations are performed at several laser pulse energy levels and the simulated physics are discussed and compared with those of tests and literature. The predicted coupling coefficients for the lightcraft compared reasonably well with those of tests conducted on a pendulum apparatus.

Wang, Ten-See↗

Performance Modeling of Experimental Laser Lightcrafts

A computational plasma aerodynamics model is developed to study the performance of a laser propelled Lightcraft. The computational methodology is based on a time-accurate, three-dimensional, finite-difference, chemically reacting, unstructured grid, pressure-based formulation. The underlying physics are added and tested systematically using a building-block approach. The physics modeled include non-equilibrium thermodynamics, non-equilibrium air-plasma finite-rate kinetics, specular ray tracing, laser beam energy absorption and refraction by plasma, non-equilibrium plasma radiation, and plasma resonance. A series of transient computations are performed at several laser pulse energy levels and the simulated physics are discussed and compared with those of tests and literatures. The predicted coupling coefficients for the Lightcraft compared reasonably well with those of tests conducted on a pendulum apparatus.

Wang, Ten-See↗

Mixing of supersonic jets including the effects of supersonic jets including the effects of transverse pressure gradient using difference methods

The usual boundary-layer equations describing the steady-state mixing of parallel jets are supplemented by the momentum equation in the direction normal to the flow. This allows detailed computation of the flow field in the mixing region and simultaneous computation of the outer inviscid flow. An explicit and an implicit finite difference scheme have been developed and applied in several illustrative examples. The examples include mixing of planar and axisymmetric supersonic jets of different composition with both matched and unmatched static pressures. Numerical results were compared with available experimental data obtained for the unmatched pressure case.

Kurkov, A. P.↗

Analysis of the Spectral Stability of the Generalized Runge–Kutta Methods Applied to Initial-Boundary-Value Problems for Equations of the Parabolic Type. II. Implicit Methods

We consider specific realizations of different implicit generalized Runge–Kutta methods as applied to the numerical integration with respect to time of initial-boundary-value problems for the second-order parabolic equations and investigate their spectral stability. It is shown that all implicit generalized Runge–Kutta methods are unconditionally spectrally stable but some of them have the conditional property of monotonicity of the numerical solution with respect to time. The functions of spectral stability of the implicit generalized Runge–Kutta methods are rational. We compare the analytic solution of the nonstationary one-dimensional problem of heat conduction with the numerical solutions of this problem obtained by different implicit generalized Runge–Kutta methods. It is shown that, in this case, the application of the one-stage Radau methods with subsequent discretization of the problem with respect to the space variable leads to the classical forward finite difference scheme (Laasonen scheme), whereas the use of the one-stage Gauss–Legendre method leads to a six-point symmetric scheme (Crank–Nicolson scheme). It is shown that diagonally implicit generalized Nørsett and Burrage methods are realized in almost the same way as the one-stage Radau and Gauss–Legendre methods but their accuracy in the time step is 10–1000 times higher. On the basis of comparison of the numerical and analytic solutions, we conclude that, in order to get practically suitable numerical solutions without any restrictions on the time step, it is reasonable to use one- and three-stage generalized Radau methods or two- and four-stage Lobatto IIIC methods. All other explicit and implicit generalized Runge–Kutta methods require certain restrictions imposed on the time step.

42 ENGINEERING↗

Multigrid applied to singular perturbation problems

The solution of the singular perturbation problem by a multigrid algorithm is considered. Theoretical and experimental results for a number of different discretizations are presented. The theoretical and observed rates agree with the results developed in an earlier work of Kamowitz and Parter. In addition, the rate of convergence of the algorithm when the coarse grid operator is the natural finite difference analog of the fine grid operator is presented. This is in contrast to the case in the previous work where the Galerkin choice (I sup H sub h L sub h,I sup h sub H) was used for the coarse grid operators.

Kamowitz, David↗

Strong scintillations in astrophysics. IV - Cross-correlation between different frequencies and finite bandwidth effects

The cross-correlation of the intensity fluctuations between different frequencies and finite-bandwidth effects on the intensity correlations are calculated based on the Markov approximation. The results may be applied to quite general turbulence spectra for an extended turbulent medium. Calculations of the cross-correlation function and of finite-bandwidth effects are explicitly carried out for both Gaussian and Kolmogorov turbulence spectra. The increases of the correlation scale of intensity fluctuations are different for these two spectra, and the difference can be used to determine whether the interstellar turbulent medium has a Gaussian or a Kolmogorov spectrum.

Lee, L. C.↗