Search NASA⌕ Search

SEARCH · Search NASA

Results for “formatting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

A critical assessment of deformation twinning and epsilon martensite formation in austenitic alloys during complex forming operations

Highlights: • The formation of ε-martensite in TRIP steel reduces formability. • In austenitic alloys, stress induced transformation in addition to twinning and slip does not affect the twinning behaviour. • The volume fraction of twins exhibits variation depending on the strain pathway due to differences in texture development. - Abstract: The effect of mechanical twinning and ε-martensite formation on the formability of austenitic alloys in complex strain pathways has been examined. One of the alloys studied deformed by deformation twinning and slip (TWIP), and this alloy was examined with two grain sizes. The second alloy showed three concurrent deformation modes (slip, TWIP and ε-martensite TRIP). The TWIP/TRIP alloy showed a markedly reduced formability compared to similar alloys, and this has been attributed to a combination of the early development of strain localizations, and the stress-induced formation of ε-martensite. It is suggested that the TRIP effect may not be desirable in high formability sheet steels if the transformation product is ε-martensite. Microstructural examination revealed that the different strain paths develop different twin volume fractions. Plasticity modelling has shown this to be the result of differences in texture development in the different strain paths. In microstructures where slip, TWIP and TRIP can operate concurrently, the stress to activate twinning is unaffected by the additional deformation mode becoming operative.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Indirect synthesis of Al{sub 2}O{sub 3}via radiation- or photochemical formation of its hydrated precursors

Graphical abstract: - Highlights: • Al{sub 2}O{sub 3} precursors were produced by UV/e-beam irradiation of aqueous solutions. • Depending on the aluminium salt (Cl{sup −} or NO{sub 3}{sup −}), either γ-AlOOH or Al(OH){sub 3} is formed. • The mechanism involved strongly depends on the presence of formate anion. • Prepared mesoporous solid phase has high specific surface area (<190 m{sup 2} g{sup −1}). • Calcination of the precursor leads to the formation of γ-/η-, θ- and α-Al{sub 2}O{sub 3}. - Abstract: γ-, θ- and α-modifications of aluminium oxide (alumina) were successfully prepared by calcination of precursor solid phase obtained by irradiation of clear aqueous solutions by UV light or electron beam. For the precipitate to form, formate anion must be present in the solution in sufficient concentration. According to X-ray diffraction, the precipitate was found to consist of γ-AlOOH or a mixture of γ- and α-Al(OH){sub 3}, when aluminium chloride or aluminium nitrate was used, respectively. The addition of hydrogen peroxide as a ·OH radical source and sensitizer markedly improved the efficiency of the preparation. Some hints for the apparently very complex mechanism involved were listed and discussed. Calcination of the dried precipitate at 500–800 °C produced highly porous γ-alumina with high specific surface area (ca. 150 m{sup 2} g{sup −1}). Mixture of γ- and θ-transition aluminas was obtained at 1000 °C and pure, stable corundum α-Al{sub 2}O{sub 3} formed at 1200 °C. Samples were further investigated by means of scanning electron microscopy and specific surface area or porosity measurement. According to N{sub 2} adsorption isotherm, the precipitate contains mostly mesopores with average pore size 7 nm with specific surface area of ca. 100 m{sup 2} g{sup −1}. Possible applications of the material as sorbent or catalyst as well as a pure matrix for thermoluminescence dosimetry were briefly contemplated. Strong light-induced thermoluminescence was observed in both γ- and α-Al{sub 2}O{sub 3} samples at 300–400 °C, whereas in the absence of light, only an inexpressive glow peak at 179 °C was observed.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Twin formation from a twin boundary in Mg during in-situ nanomechanical testing

An important fundamental question regarding deformation twinning is whether it is possible for twins to nucleate at boundaries or interfaces when specific stress fields are present. A corollary that follows from this question is: if this is indeed possible, what determines the proper stress field and how does it occur at the nanoscale? Here, we demonstrate the application of an in-situ nanoindentation approach to confine and dynamically capture the stages in the formation of a deformation twin at an internal twin boundary in single crystal Mg. We observe the formation of contraction twin embryos at the pre-existing extension twin boundary, and the subsequent propagation of the twin embryos into the crystal. We reveal an intermediate step, involving the coalescence of tiny embryos into a larger embryo before the nucleus emanates into the crystal. De-twinnning of the twin embryos is captured during unloading and shown to leave a remnant nanosized twin (<10 nm) after complete unloading. A 3D full-field, crystal plasticity model identifies that the twin type and variant selection of the stable embryo are governed by the internal local stress state prevailing at the pre-existing twin boundary. The possible role played by dislocations and boundary structure (incoherent vs. coherent) in embryo formation, as suggested by the TEM and modeling analyses, are discussed.

grains and interfaces, magnesium alloys, plasticit↗
DOE OSTI2018

Formation and self-organization of void superlattices under irradiation: A phase field study

Self-organized patterns, realized in non-equilibrium processes, have been widely observed in physics and chemistry. As a powerful tool to create far-from-equilibrium environments, irradiation produces a variety of types of defects, which can self-organize through physical interactions and chemical reactions. Such a process becomes complicated especially when both thermodynamics and kinetics play critical roles in pattern formation. Here, we explore the formation and self-organization mechanism of void superlattices in metals and alloys under irradiation through phase field modeling and simulations. For the first time, three different formation mechanisms of void superlattices are clearly distinguished according to their thermodynamic origin and reaction kinetics. It is discovered that the characteristic length and symmetry of an emerging superlattice is determined by the interplay of the thermodynamic driving force and the kinetic anisotropy of the system. Through parametric study, the effects of kinetic coefficients, such as atomic mobility and irradiation dose rate, on the nucleation, growth, coarsening, coalescence, and ordering of voids are systematically investigated. The theoretical model developed in this work may provide guidelines for designing desired self-organized microstructures under irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Chemical composition based machine learning model to predict defect formation in additive manufacturing

With a goal of exploiting additive manufacturing to improve the manufacturing of existing reactor materials, we developed a chemical composition-based machine learning model to predict the printability of any given alloy in laser powder bed fusion (L-PBF) using experimental data from peer-reviewed literature. We defined printability as the ability to avoid defects like cracking, balling, porosity, and lack of fusion, that are caused by thermal stresses (during solidification or liquation), molten pool disintegration into disconnected small beads or lack of heat input respectively. Our models predict the tendency of balling defect formation and porosity percentage for a given composition, under a given set of processing conditions. To predict the likelihood of balling defect, three models: a random forest classifier, a gradient boost regressor and a neural network were trained on a dataset containing both traditional alloys and high entropy alloys. The neural network model showed the highest accuracy of 92.3 % in predicting the balling defect formation. A random forest regressor, gradient boost regressor and neural network were trained and tested on a dataset of various alloys to predict porosity. The random forest regressor showed the best predictions with an R 2 score of 0.97. The models also revealed the relative importance of the input descriptors on defect-formation tendency. Of particular significance was the identification of carbon as an important element in determining the occurrence of balling and percent porosity in alloys like steel, as well as being moderately important to the percentage porosity in other alloys as well as steel. Manganese was also identified as a key descriptor for the percentage of porosity in steel and other alloys. Manganese’s low thermal conductivity and consistent presence in the dataset is the likely cause for its contribution. Carbon’s role is attributable to its relatively high specific heat and high melting temperature. In conclusion, our model serves as a swift, chemistry-based tool to design experiments and find modified compositions better suited for additive manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Naphthalene DNA adduct formation and tolerance in the lung

Naphthalene (NA) is a respiratory toxicant and possible human carcinogen. NA is a ubiquitous combustion product and significant component of jet fuel. The National Toxicology Program found that NA forms tumors in two species, in rats (nose) and mice (lung). However, it has been argued that NA does not pose a cancer risk to humans because NA is bioactivated by cytochrome P450 monooxygenase enzymes that have very high efficiency in the lung tissue of rodents but low efficiency in the lung tissue of humans. It is thought that NA carcinogenesis in rodents is related to repeated cycles of lung epithelial injury and repair, an indirect mechanism. Repeated in vivo exposure to NA leads to development of tolerance, with the emergence of cells more resistant to NA insult. We tested the hypothesis that tolerance involves reduced susceptibility to the formation of NA-DNA adducts. NA-DNA adduct formation in tolerant mice was examined in individual, metabolically-active mouse airways exposed ex vivo to 250 μM 14 C-NA. Ex vivo dosing was used since it had been done previously and the act of creating a radioactive aerosol of a potential carcinogen posed too many safety and regulatory obstacles. Following extensive rinsing to remove unbound 14 C-NA, DNA was extracted and 14 C-NA-DNA adducts were quantified by accelerator mass spectrometry (AMS). The tolerant mice appeared to have slightly lower NA-DNA adduct levels than non-tolerant controls, but intra-group variations were large and the difference was statistically insignificant. It appears the tolerance may be more related to other mechanisms, such as NA-protein interactions in the airway, than DNA-adduct formation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Irradiation-induced formation of G-phase precipitates and M 2 X carbides in self-ion irradiated HT-9

Ferritic-martensitic steels with high chromium content are a promising material group for advanced nuclear systems due to their high temperature strength and good irradiation tolerance. HT-9 is an optimized and often-studied alloy in this group, but additional studies are required on its radiation response under extreme conditions to be experienced in various types of nuclear reactors, especially with respect to phase stability under irradiation. Self-ion irradiation of HT-9 by 5 MeV Fe ions was used to simulate neutron-induced behavior reaching peak doses of 100 and 300 dpa at temperatures ranging from 450 to 550 °C. M 23 C 6 carbides that existed prior to irradiation were found to remain stable under all examined irradiation conditions. As irradiation progressed at 450 and 500 °C, however, formation of spherical-like G-phase precipitates and needle-like M 2 X carbides was observed. G-phase precipitates were found to be enriched in Ni, Si, and Mn, and show no interface segregation, whereas needle-like M 2 X carbides were rich in Cr and Mo and clearly displayed interface segregation of Ni and Si. M 2 X carbide formation is believed to be assisted by vacancies, while G-phase precipitation is thought to be assisted by interstitials. Finally, this difference in defect-mediated formation leads to a difference in distribution with depth. M 2 X carbides are distributed over shallower depths than that of G-phase precipitates, consistent with defect imbalance predictions that consider the influence of the injected interstitial effect.

atom probe tomography↗
DOE OSTI2016

Effects of humidity during formation of zinc oxide electron contact layers from a diethylzinc precursor solution

Here, this work focuses on the role of humidity in the formation of ZnO thin films from a reactive diethylzinc precursor solution for use as the electron contact layer (ECL) in organic photovoltaic (OPV) devices. This method is well suited for flexible devices because the films are annealed at 120 °C, making the process compatible with polymer substrates. ZnO films were prepared by spin coating and annealing at different relative humidity (RH) levels. It is found that RH during coating and annealing affects the chemical and physical properties of the ZnO films. Using x-ray photoelectron spectroscopy it is found that increasing RH during the formation steps produces a more stoichiometric oxide and a higher Zn/O ratio. Spectroscopic ellipsometry data shows a small decrease in the optical band gap with increased humidity, consistent with a more stoichiometric oxide. Kelvin probe measurements show that increased RH during formation results in a larger work function (i.e. further from vacuum). Consistent with these data, but counter to what might be expected, when these ZnO films are used as ECLs in OPV devices those with ZnO ECLs processed in low RH (less stoichiometric) had higher power conversion efficiency than those with high-RH processed ZnO due to improved open-circuit voltage. The increase in open-circuit voltage with decreasing humidity was observed with two different donor polymers and fullerene acceptors, which shows the trend is due to changes in ZnO. The observed changes in open-circuit voltage follow the same trend as the ZnO work function indicating that the increase in open-circuit voltage with decreasing humidity is the result of improved energetics at the interface between the bulk-heterojunction and the ZnO layer due to a vacuum level shift.

14 SOLAR ENERGY↗
DOE OSTI2024

Enhanced early galaxy formation in JWST from axion dark matter?

We demonstrate that enhanced early galaxy formation can generically arise in axion-like particle (ALP) dark matter (DM) models with a delayed onset of axion field oscillation. In these models, the formation of localized massive objects enhances structure formation, potentially addressing the excess recently observed by the James Webb Space Telescope (JWST), while remaining consistent with existing constraints. We identify viable parameter space with the ALP mass in the range of 10 −22 eV m a < 10 –19 eV. In addition, we show that the ALP parameter regions of interest can lead to intriguing complementary signatures in the small scale structure of DM halos and existing experimental searches for ALPs.

Bird, Simeon↗
DOE OSTI2016

Radical–radical reactions, pyrene nucleation, and incipient soot formation in combustion

Here, we present a combined experimental and probabilistic simulation study of soot-precursor. The experiments were conducted using aerosol mass spectrometry coupled with tunable vacuum ultraviolet radiation from the Advanced Light Source at Lawrence Berkeley National Laboratory. Mass spectra and photoionization efficiency (PIE) curves of soot precursor species were measured at different heights in a premixed flat flame and in a counter-flow diffusion flame fueled by ethylene and oxygen. The PIE curves at the pyrene mass from these flames were compared with reference PIE scans recorded for pyrene. The results demonstrate that other C 16 H 10 isomers than pyrene are major components among species condensed onto incipient soot in this study, which is in agreement with the simulations. Species with mass 202 u only have a high prevalence in incipient soot particles drawn from the premixed flame, but hydrocarbon species with sizes in the range 200-400 u are important to incipient-soot formation in both flames. The simulations predict that some species form through combination reactions involving relatively large radicals and bypass traditional molecular-growth pathways through addition of small hydrocarbon species. The experimental results support this prediction; they demonstrate that these species have higher relative abundances in particles formed close to the fuel outlet than smaller, lighter molecular species and indicate that these species are important to early formation of incipient-soot precursors. The results also imply that a leading role in incipient-soot precursor formation is played by species with lower thermal stability than the even-carbon numbered, unsubstituted polycyclic aromatic hydrocarbons known as "stabilomers".

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effect of ammonia addition on suppressing soot formation in methane co-flow diffusion flames

Due to issues surrounding carbon dioxide emissions from carbon-containing fuels, there is growing interest in ammonia (NH 3 ) as an alternative combustion fuel. One attractive method of burning NH 3 is to co-fire it with hydrocarbons, such as natural gas, and in this case soot formation is possible. To begin understanding the influence of NH 3 on soot formation when co-fired with hydrocarbons, soot volume fractions and mole fractions of gas-phase species were computationally and experimentally interrogated for CH 4 flames with up to 40% NH 3 by volumetric fuel fraction. Mole fractions of gas-phase species, including C 2 H 2 and C 6 H 6 , were measured with on-line electron impact mass spectrometry, and soot volume fractions were obtained via color-ratio pyrometry. The simulations employed a detailed chemical mechanism developed for capturing nitrogen interactions with hydrocarbons during combustion. The results are compared to findings in N 2 -CH 4 flames, in order to separate thermal and dilution effects from the chemical influence of NH 3 on soot formation. Experimentally, C 2 H 2 concentrations were found to decrease slightly for the NH 3 -CH 4 flames relative to N 2 -CH 4 flames, and a stronger suppression of C 6 H 6 was found for NH 3 relative to N 2 additions. The measured results show a strong suppression of soot with the addition of NH 3 , with soot concentrations reduced by over a factor of 10 with addition of up to 20% or more NH 3 by mole fraction. The model satisfactorily captured relative differences in maximum centerline C 2 H 2 , C 6 H 6 , and soot concentrations with addition of N 2 , but was unable to match measured differences in NH 3 -CH 4 flames. Furthermore, these results highlight the need for an improved understanding of fuel-nitrogen interactions with higher hydrocarbons to enable accurate models for predicting particulate emissions from NH 3 /hydrocarbon combustion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Formation of phenanthrenyl radicals via the reaction of acenaphthyl with acetylene

Ab initio G3(MP2,CC)/B3LYP/6–31G** calculations of the potential energy surface for the reaction of 3-acenaphthyl radical with acetylene were combined with Rice-Ramsperger-Kassel-Marcus Master Equation calculations of the temperature- and pressure-dependent reaction rate constants and product branching ratios with the goal to examine the transformation of an edge five-membered ring into a six-membered one. The reaction mechanism has been shown to contain two stages: (1) the formation of 3-ethynylacenaphthylene + H in the 3-acenaphthyl + C 2 H 2 reaction via acetylene addition to the radical site and an H loss, (2) the formation of the 1-phenanthrenyl radical in the 3-ethynylacenaphthylene + H reaction via H addition to the five-membered ring followed by the ring flip. The results of kinetic modeling show this pathway being faster than the pathway proposed earlier featuring the CCH chemisorption on the six-membered ring without involvement of the five-membered ring. A kinetic test demonstrated the dominance of the former pathway for the formation of pyrene from naphthalene. Here, it is expected that the new mechanism plays a major role in the transformation of five-membered rings on edges of PAH structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Analysis of soot formation from aviation fuels in laminar counterflow flames

Combustion emissions from aviation contribute to the formation of condensation trail (contrail) that can lead to the formation of anthropogenic cirrus clouds. Ice particles that form contrails are observed to have a linear correlation with soot particle number density. Synthetic aviation fuels (SAFs) offer a promising route to mitigate the production of soot particles while also increasing energy security. Although studies have focused on combustion and spray behavior, the detailed investigation of soot formation processes for different jet fuels and their impact on models for computational fluid dynamics (CFD) applications is not well understood. Moreover, experimental measurements of soot for canonical flames using Synthetic aviation fuels (SAF) for model validation remain scarce. To address this, we use employed the Lawrence Livermore National Laboratory (LLNL) detailed soot model based on the discrete sectional method. Additionally, we develop two reduced chemical mechanisms for Jet-A and Alcohol-to-Jet (C1) that are suitable for turbulent flame simulations and couple them with the Hybrid Method of Moments (HMOM). The detailed and reduced model frameworks are validated against experimental measurements of soot volume fraction (ƒ ν ) from a counterflow burner experiment previously reported in the literature. Given the good agreement between modeling results and experimental measurements for the (1) spatial distribution of ƒ ν and (2) the non-linear variation of peak ƒ ν with strain rate, we further investigate the modeled sub-processes (nucleation, condensation, surface growth, and oxidation) using the LLNL model to analyze the assumptions in the reduced model framework. Furthermore, the results indicate a significant contribution from resonant radicals to the surface growth of soot particles, which are not accounted for in the current implementation of HMOM and could help reconcile soot predictions by the reduced model with observations.

Counterflow↗
DOE OSTI2020

Nanotwin formation in Ni-Mo-W alloys deposited by dc magnetron sputtering

Nanotwinned metals and alloys have an attractive suite of properties, but the formation of the underlying nanostructure is generally dependent on the alloy chemistry and processing conditions. This study was undertaken to investigate the effect of deposition rate on nanotwin formation in sputter deposited Ni 84 Mo 11 W 5 that possess ultrahigh strength and stability. Specifically, deposition rates of 0.5-2.3 nm/s were examined and the grain size, texture, twin spacing and hardness were characterized. Minimal variations in the underlying nanostructure and attendant hardness were observed, elucidating a wide processing window and the importance of chemistry on the formation of nanotwins in this alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The effect of annealing on kink band formation in Ag/Fe nanolaminates

Kink banding is a common, though not well understood, failure mechanism in anisotropic materials such as nano metallic laminates (NMLs). In this work, we investigate the effect of annealing on kink band (KB) formation in Ag/Fe NMLs prepared by accumulative roll bonding (ARB) using in situ micropillar compression, scanning/transmission electron microscopy (S/TEM), and transmission Kikuchi diffraction (TKD) analyses. Our results show that annealing increases the KB initiation strain, decreases the probability of KB formation, and decreases the load drop magnitude accompanying kink banding in Ag/Fe NMLs. Post-compression analyses reveal that annealing facilitates more uniform deformation of pillars and affects the formation of geometrically necessary grain boundaries (GNBs) near the kink band boundary (KBB). Compared to its as-rolled counterpart, annealed Ag/Fe has wider KBs with blunter KBBs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effect of Co on twin formation and magnetic properties of Sm(Fe,Ti,V) 12 alloys

Transferring the excellent intrinsic magnetic properties of SmFe 12 -based compounds to their extrinsic properties remains the main challenge in the development of high-performance SmFe12-based permanent magnets. Twin formation is one of the reasons for the inability to achieve high coercivity and remanence. Here we have shown that the addition of Co in Sm(Fe 1-x Co x ) 10–11 M 1–2 alloys, where M=Ti and V, leads to an increase in twin density. Microstructural characterizations revealed that the atomic arrangement in the twin boundary changes depending on the stabilizing element, which directly influences the local intrinsic magnetic properties. Theoretical investigations showed that the critical grain size at which twin formation can be hindered by grain size reduction decreases when the stabilizer changes from V to Ti. Furthermore, this study shows that the alloy composition influences not only the intrinsic magnetic properties but also the twin formation energy and its grain size dependence, crucial for the design of SmFe12-based permanent magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Zinc oxide nanoparticles induce migration and adhesion of monocytes to endothelial cells and accelerate foam cell formation

Metal oxide nanoparticles are widely used in industry, cosmetics, and biomedicine. However, the effects of exposure to these nanoparticles on the cardiovascular system remain unknown. The present study investigated the effects of nanosized TiO{sub 2} and ZnO particles on the migration and adhesion of monocytes, which are essential processes in atherosclerogenesis, using an in vitro set-up of human umbilical vein endothelial cells (HUVECs) and human monocytic leukemia cells (THP-1). We also examined the effects of exposure to nanosized metal oxide particles on macrophage cholesterol uptake and foam cell formation. The 16-hour exposure to ZnO particles increased the level of monocyte chemotactic protein-1 (MCP-1) and induced the migration of THP-1 monocyte mediated by increased MCP-1. Exposure to ZnO particles also induced adhesion of THP-1 cells to HUVECs. Moreover, exposure to ZnO particles, but not TiO{sub 2} particles, upregulated the expression of membrane scavenger receptors of modified LDL and increased cholesterol uptake in THP-1 monocytes/macrophages. In the present study, we found that exposure to ZnO particles increased macrophage cholesterol uptake, which was mediated by an upregulation of membrane scavenger receptors of modified LDL. These results suggest that nanosized ZnO particles could potentially enhance atherosclerogenesis and accelerate foam cell formation. - Highlights: • Effects of metal oxide nanoparticles on foam cell formation were investigated. • Exposure to ZnO nanoparticles induced migration and adhesion of monocytes. • Exposure to ZnO nanoparticles increased macrophage cholesterol uptake. • Expression of membrane scavenger receptors of modified LDL was also increased. • These effects were not observed after exposure to TiO{sub 2} nanoparticles.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2015

Phosphoramide mustard exposure induces DNA adduct formation and the DNA damage repair response in rat ovarian granulosa cells

Phosphoramide mustard (PM), the ovotoxic metabolite of the anti-cancer agent cyclophosphamide (CPA), destroys rapidly dividing cells by forming NOR-G-OH, NOR-G and G-NOR-G adducts with DNA, potentially leading to DNA damage. A previous study demonstrated that PM induces ovarian DNA damage in rat ovaries. To investigate whether PM induces DNA adduct formation, DNA damage and induction of the DNA repair response, rat spontaneously immortalized granulosa cells (SIGCs) were treated with vehicle control (1% DMSO) or PM (3 or 6 μM) for 24 or 48 h. Cell viability was reduced (P < 0.05) after 48 h of exposure to 3 or 6 μM PM. The NOR-G-OH DNA adduct was detected after 24 h of 6 μM PM exposure, while the more cytotoxic G-NOR-G DNA adduct was formed after 48 h by exposure to both PM concentrations. Phosphorylated H2AX (γH2AX), a marker of DNA double stranded break occurrence, was also increased by PM exposure, coincident with DNA adduct formation. Additionally, induction of genes (Atm, Parp1, Prkdc, Xrcc6, and Brca1) and proteins (ATM, γH2AX, PARP-1, PRKDC, XRCC6, and BRCA1) involved in DNA repair were observed in both a time- and dose-dependent manner. These data support that PM induces DNA adduct formation in ovarian granulosa cells, induces DNA damage and elicits the ovarian DNA repair response. - Highlights: • PM forms ovarian DNA adducts. • DNA damage marker γH2AX increased by PM exposure. • PM induces ovarian DNA double strand break repair.

60 APPLIED LIFE SCIENCES↗