Search NASA⌕ Search

SEARCH · Search NASA

Results for “observable behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

A large polarization in Ce-modified bismuth ferrite thin films

Bi{sub 0.95}Ce{sub 0.05}FeO{sub 3} (BCFO) thin films were grown on SrRuO{sub 3}/TiO{sub 2}/SiO{sub 2}/Si(100) substrates via radio frequency sputtering. The BCFO thin film has a (111) orientation with a high phase purity. Improved dielectric behavior is observed for the BCFO thin film as compared with that of pure bismuth ferrite thin film. A large remanent polarization of 2P{sub r} {approx} 183.9 {mu}C/cm{sup 2} is induced in the BCFO thin film, owing to the (111) orientation and the introduction of Ce. The local phase decomposition induced by larger depolarization fields and the oxygen vacancies dominates the fatigue resistance of the BCFO thin film.

36 MATERIALS SCIENCE↗

Experimental evidence of Ga-vacancy induced room temperature ferromagnetic behavior in GaN films

We have grown Ga deficient GaN epitaxial films on (0001) sapphire substrate by plasma-assisted molecular beam epitaxy and report the experimental evidence of room temperature ferromagnetic behavior. The observed yellow emission peak in room temperature photoluminescence spectra and the peak positioning at 300 cm{sup -1} in Raman spectra confirms the existence of Ga vacancies. The x-ray photoelectron spectroscopic measurements further confirmed the formation of Ga vacancies; since the N/Ga is found to be >1. The ferromagnetism is believed to originate from the polarization of the unpaired 2p electrons of N surrounding the Ga vacancy.

36 MATERIALS SCIENCE↗

Using heavy atom rare gas matrix to control the reactivity of 4-methoxybenzaldehyde: A comparison with benzaldehyde

Different patterns of photochemical behavior were observed for 4-methoxybenzaldehyde (p-anisaldehyde) isolated in xenon and in argon matrices. Monomers of the compound isolated in solid Xe decarbonylate upon middle ultraviolet irradiation, yielding methoxybenzene (anisole), and CO. On the other hand, p-anisaldehyde isolated in an Ar matrix and subjected to identical irradiation, predominantly isomerizes to the closed-ring isomeric ketene (4-methoxycyclohexa-2,4-dien-1-ylidene) methanone. Experimental detection of a closed-ring ketene photoproduct, generated from an aromatic aldehyde, constitutes a rare observation. The difference between the patterns of photochemical transformations of p-anisaldehyde isolated in argon and xenon environments can be attributed to the external heavy-atom effect, where xenon enhances the rate of intersystem crossing from the singlet to the triplet manifold in which decarbonylation (via p-methoxybenzoyl radical) takes place. The parent compound, benzaldehyde, decarbonylates (to benzene + CO) when subjected to middle ultraviolet irradiation in both argon and xenon matrices. This demonstrates the role of the methoxy p-anisaldehyde substituent in activation of the reaction channel leading to the formation of the ketene photoproduct.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heavy-fermion instability in double-degenerate plasmas

In this work, we study the propagations of normal frequency modes for quantum hydrodynamic waves in the linear limit and introduce a new kind of instability in a double-degenerate plasma. Three different regimes, namely, low, intermediate, and high magnetic field strengths are considered which span the applicability of the work to a wide variety of environments. Distinct behavior is observed for different regimes, for instance, in the laboratory-scale field regime no frequency-mode instability occurs unlike those of intermediate and high magnetic-field strength regimes. It is also found that the instability of this kind is due to the heavy-fermions which appear below a critical effective-mass parameter ({mu}{sub cr}={radical}(3)) and that the responses of the two (lower and upper frequency) modes to fractional effective-mass change in different effective-mass parameter ranges (below and above the critical value) are quite opposite to each other. It is shown that the heavy-fermion instability due to extremely high magnetic field such as that encountered for a neutron-star crust can lead to confinement of stable propagations in both lower and upper frequency modes to the magnetic poles. Current study can have important implications for linear wave dynamics in both laboratory and astrophysical environments possessing high magnetic fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural, morphological, and magnetic characterization of In{sub 1-x}Mn{sub x}As quantum dots grown by molecular beam epitaxy

In this paper, we present a method to order low temperature (LT) self-assembled ferromagnetic In{sub 1-x}Mn{sub x}As quantum dots (QDs) grown by molecular beam epitaxy (MBE). The ordered In{sub 1-x}Mn{sub x}As QDs were grown on top of a non-magnetic In{sub 0.4}Ga{sub 0.6}As/GaAs(100) QDs multi-layered structure. The modulation of the chemical potential, due to the stacking, provides a nucleation center for the LT In{sub 1-x}Mn{sub x}As QDs. For particular conditions, such as surface morphology and growth conditions, the In{sub 1-x}Mn{sub x}As QDs align along lines like chains. This work also reports the characterization of QDs grown on plain GaAs(100) substrates, as well as of the ordered structures, as function of Mn content and growth temperature. The substitutional Mn incorporation in the InAs lattice and the conditions for obtaining coherent and incoherent structures are discussed from comparison between Raman spectroscopy and x-ray analysis. Ferromagnetic behavior was observed for all structures at 2 K. We found that the magnetic moment axis changes from [110] in In{sub 1-x}Mn{sub x}As over GaAs to [1-10] for the ordered In{sub 1-x}Mn{sub x}As grown over GaAs template.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

X-ray backlight measurement of preformed plasma by kJ-class petawatt LFEX laser

Foot and pedestal pulses that precede the main pulse from a high-intensity laser greatly affect laser-plasma interactions. Especially in fast ignition schemes, preceding pulses generate a plasma prior to irradiation by the main pulse. This results in a too energetic and divergent electron beam being generated in the preformed plasma, which reduces the energy coupling efficiency from the heating laser to the dense fuel core. A preformed plasma with a density scale length of 40-60 {mu}m was observed by a time- and space-resolved x-ray backlight technique using the LFEX laser system at the Institute of Laser Engineering, Osaka University. Preceding pulses (i.e., the foot and pedestal) of the LFEX were characterized by comparing observations with calculations results obtained using a two-dimension (2D) radiation-hydrodynamic simulation code. In a separate experiment, the 2D code was benchmarked with the experimentally observed hydrodynamic behavior of a gold plasma produced by a nanosecond laser pulse that mimicked foot and pedestal pulses (intensity: 1 Multiplication-Sign 10{sup 11}-1 Multiplication-Sign 10{sup 12}W/cm{sup 2}). The preceding pulses were estimated to have an intensity of 1 Multiplication-Sign 10{sup 12}-10{sup 13}W/cm{sup 2}, a duration of 2.0 ns, and a spot diameter at the target of 200-600 {mu}m by comparing the measured hydrodynamics of the preformed plasma with that calculated by the 2D hydrodynamic simulation code.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of spin-glass behavior in nickel adsorbed few layer graphene

Nickel-adsorbed graphene was prepared by first synthesizing graphite oxide (GO) by modified Hummers' method and then reducing a solution containing both GO and Ni{sup 2+}. Energy dispersive X-ray spectroscopy analysis showed 31 at. % nickel was present. Magnetization measurements under both dc and ac magnetic fields were carried out in the temperature range 2 K to 300 K. The zero field cooled and field cooled magnetization data showed a pronounced irreversibility at a temperature around 20 K. The analysis of the ac susceptibility data was carried out by both Vogel-Fulcher as well as power law. From dynamic scaling analysis, the microscopic flipping time {tau}{sub 0}{approx}10{sup -13}s and critical exponent z{nu}=5.9{+-}0.1 were found, indicating the presence of conventional spin glass in the system. The spin glass transition temperature was estimated as 19.5 K. Decay of thermoremanent magnetization was explained by stretched exponential function with a value of the exponent as 0.6. From the results, it is concluded that nickel adsorbed graphene behaves like a spin-glass.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Processing optimization and sintering time dependent magnetic and optical behaviors of Aurivillius Bi{sub 5}Ti{sub 3}FeO{sub 15} ceramics

Aurivillius Bi{sub 5}Ti{sub 3}FeO{sub 15} (BTF) ceramics were synthesized using the conventional solid state reaction method by optimizing excess of Bi{sub 2}O{sub 3} and sintering time. Their structures, magnetic, and optical properties were investigated in detail. The optimum process to sinter pure Aurivillius BTF ceramics was confirmed to be 3 wt. % excess Bi{sub 2}O{sub 3} to compensate the Bi volatilization at 1050 Degree-Sign C for 240 min (BTF-240M). The microstructure and crystalline structure of the BTF ceramics had little dependence on the sintering time from the x-ray diffraction (XRD) and scanning electron microscopic data. Nevertheless, the magnetic and optical properties were closely related with the sintering time. The overall magnetic behavior of these BTF ceramics was superparamagnetic (SPM), whereas there were unambiguous clues for the existence of antiferromagnetic (AFM) interactions. However, whether the SPM behavior was intrinsic or arised from a tiny amount of spinel Fe{sub 3}O{sub 4} impurity phase cannot be thoroughly ruled out in the XRD detection limit in the present stage. The AFM interactions were weakened upon extending the sintering time. The effective magnetic moment ({mu}{sub eff}), however, demonstrated different dependency on the sintering time. It increased with the sintering time from 80 min to 240 min, and then dropped with further extending the sintering time. Compared with other BTF ceramics, the BTF-240M ceramic showed the highest values of the refractive index n and real part {epsilon}{sub 1}, as well as the lowest ones of the extinction coefficient k and imagine part {epsilon}{sub 2} in whole photon energy range. Finally, a direct inter-band transition was confirmed for these BTF ceramics and optical energy band gaps were determined to be about 3.08, 3.18, and 3.39 eV for 80 min, 150 min, and 240 min sintered BTF ceramics, respectively, yet abnormal optical behavior was observed in BTF-360M ceramic.

36 MATERIALS SCIENCE↗

Ultrafast switching in wetting properties of TiO{sub 2}/YSZ/Si(001) epitaxial heterostructures induced by laser irradiation

We have demonstrated dark hydrophilicity of single crystalline rutile TiO{sub 2}(100) thin films, in which rapid switching from a hydrophobic to a hydrophilic surface was achieved using nanosecond excimer laser irradiation. The TiO{sub 2}/YSZ/Si(001) single crystalline heterostructures were grown by pulsed laser deposition and were subsequently irradiated by a single pulse of a KrF excimer laser at several energies. The wettability of water on the surfaces of the samples was evaluated. The samples were hydrophobic prior to laser annealing and turned hydrophilic after laser annealing. Superhydrophilic surfaces were obtained at higher laser energy densities (e.g., 0.32 J.cm{sup -2}). The stoichiometries of the surface regions of the samples before and after laser annealing were examined using XPS. The results revealed the formation of oxygen vacancies on the surface, which are surmised to be responsible for the observed superhydrophilic behavior. According to the AFM images, surface smoothening was greater in films that were annealed at higher laser energy densities. The samples exhibited hydrophobic behavior after being placed in ambient atmosphere. The origin of laser induced wetting behavior was qualitatively understood to stem from an increase of point defects near the surface, which lowered the film/water interfacial energy. This type of rapid hydrophobic/hydrophilic switching may be used to facilitate fabrication of electronic and photonic devices with novel properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Competition between (001) and (111) MgO thin film growth on Al-doped ZnO by oxygen plasma assisted pulsed laser deposition

We report on the study of epitaxial MgO thin films on (0001) Al-doped ZnO (Al: ZnO) underlayers, grown by oxygen plasma assisted pulsed laser deposition technique. A systematic investigation of the MgO thin films was performed by X-ray diffraction and atomic force microscopy, along with the current-voltage characteristics. A distinguished behavior was observed that the preferred MgO orientation changes from (111) to (001) in the films as the growth temperature increases. Two completely different in-plane epitaxial relationships were also determined from X-ray diffraction as: [110]MgO//[1120]Al: ZnO and [110]MgO//[1100]Al: ZnO for (001) MgO with 60 Degree-Sign rotated triplet domains, and [110]MgO//[1120]Al: ZnO for (111) MgO with 180 Degree-Sign rotated twin. The pronounced temperature dependence indicates a reconciliation of the nucleation driving forces among surface, interfacial, and strain energy for heteroepitaxy of cubic MgO on hexagonal Al: ZnO. The related interfacial atomic registry is considered to be important to the formation of unusual (001) MgO on hexagonal crystals. In addition, the electrical characterization revealed a dramatic reduction of the leakage current in (001) MgO thin films, whereas the small grain size of (111) MgO is identified by atomic force microscopy as a main cause of large leakage current.

36 MATERIALS SCIENCE↗

Multi-jump magnetic switching in ion-beam sputtered amorphous Co{sub 20}Fe{sub 60}B{sub 20} thin films

Unconventional multi-jump magnetization reversal and significant in-plane uniaxial magnetic anisotropy (UMA) in the ion-beam sputtered amorphous Co{sub 20}Fe{sub 60}B{sub 20}(5–75 nm) thin films grown on Si/amorphous SiO{sub 2} are reported. While such multi-jump behavior is observed in CoFeB(10 nm) film when the magnetic field is applied at 10°–20° away from the easy-axis, the same is observed in CoFeB(12.5 nm) film when the magnetic field is 45°–55° away from easy-axis. Unlike the previous reports of multi-jump switching in epitaxial films, their observance in the present case of amorphous CoFeB is remarkable. This multi-jump switching is found to disappear when the films are crystallized by annealing at 420 °C. The deposition geometry and the energy of the sputtered species appear to intrinsically induce a kind of bond orientation anisotropy in the films, which leads to the UMA in the as-grown amorphous CoFeB films. Exploitation of such multi-jump switching in amorphous CoFeB thin films could be of technological significance because of their applications in spintronic devices.

36 MATERIALS SCIENCE↗

Ordering ferromagnetic In{sub 1−x}Mn{sub x}As quantum dots

In this work, we present a method to order low temperature (LT) self-assembled ferromagnetic In{sub 1−x}Mn{sub x}As quantum dots (QDs) grown by molecular beam epitaxy (MBE). The ordered In{sub 1−x}Mn{sub x}As QDs were grown on top of a non-magnetic In{sub 0.4}Ga{sub 0.6}As/GaAs(100) QDs multi-layered structure. The modulation of the chemical potential, due to the stacking, provides a nucleation center for the LT In{sub 1−x}Mn{sub x}As QDs. For particular conditions, such as surface morphology and growth conditions, the In{sub 1−x}Mn{sub x}As QDs align along lines like chains. For comparison purposes, we also report the study of QDs grown on plain GaAs(100) substrates. Ferromagnetic behavior was observed for all structures at 2 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resistive switching properties of Ce and Mn co-doped BiFeO{sub 3} thin films for nonvolatile memory application

The Ce and Mn co-doped BiFeO{sub 3} (BCFMO) thin films were synthesized on Pt/Ti/SiO{sub 2}/Si substrates using a sol-gel method. The unipolar resistive switching (URS) and bipolar resistive switching (BRS) behaviors were observed in the Pt/BCFMO/Pt device structure, which was attributed to the formation/rupture of metal filaments. The fabricated device exhibits a large R{sub OFF}/R{sub ON} ratio (>80), long retention time (>10{sup 5} s) and low programming voltages (<1.5 V). Analysis of linear fitting current-voltage curves suggests that the space charge limited leakage current (SCLC) and Schottky emission were observed as the conduction mechanisms of the devices.

36 MATERIALS SCIENCE↗

Rectifying performance and negative differential behavior in graphite—chain—carbon nanotube junctions

In this paper, the (5, 5) capped carbon nanotubes (CNTs) in contact with different lengths of sp monoatomic chains grown on the surface of graphite substrate are fabricated and its electronic transport properties sandwiched between CNT and graphite electrodes are investigated. The first-principles calculations based on nonequilibrium Green's function in combination with density-functional theory show that their rectifying performance and negative differential resistance behavior are observed under very low biases and obviously are enhanced when the length increases. From our analysis, the charge transfer, transmission spectra, projected density of states and evolutions of molecular orbitals are responsible for these phenomena.

36 MATERIALS SCIENCE↗

Effects of temperature and strain rate on the mechanical properties of silicene

Silicene, a graphene-like two-dimensional silicon, has attracted great attention due to its fascinating electronic properties similar to graphene and its compatibility with existing semiconducting technology. So far, the effects of temperature and strain rate on its mechanical properties remain unexplored. We investigate the mechanical properties of silicene under uniaxial tensile deformation by using molecular dynamics simulations. We find that the fracture strength and fracture strain of silicene are much higher than those of bulk silicon, though the Young's modulus of silicene is lower than that of bulk silicon. An increase in temperature decreases the fracture strength and fracture strain of silicene significantly, while an increase in strain rate enhances them slightly. The fracture process of silicene is also studied and brittle fracture behavior is observed in the simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles study of the effect of phosphorus on nickel grain boundary

Based on first-principles quantum-mechanical calculations, the impurity-dopant effects of phosphorus on Σ5(012) symmetrical tilt grain boundary in nickel have been studied. The calculated binding energy suggests that phosphorus has a strong tendency to segregate to the grain boundary. Phosphorus forms strong and covalent-like bonding with nickel, which is beneficial to the grain boundary cohesion. However, a too high phosphorus content can result in a thin and fragile zone in the grain boundary, due to the repulsion between phosphorus atoms. As the concentration of phosphorus increases, the strength of the grain boundary increases first and then decreases. Obviously, there exists an optimum concentration for phosphorus segregation, which is consistent with observed segregation behaviors of phosphorus in the grain boundary of nickel. This work is very helpful to understand the comprehensive effects of phosphorus.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low beryllium content Zr-based bulk metallic glass composite with plasticity and work hardenability

A modified Zr-based bulk metallic glass matrix composite Zr{sub 47.67}Cu{sub 40}Ti{sub 3.66}Ni{sub 2.66}Be{sub 6} has been produced by increasing the contents of elements of Zr and Cu with higher Poisson ratio and reducing the contents of Ti, Ni, and Be elements with lower Poisson ratio based on famous metallic glass former Vitreloy 1. A compressive yielding strength of 1804 MPa, fracture strength of 1938 MPa and 3.5% plastic strain was obtained for obtained metallic glass composite. Also, work-hardening behavior was observed during compressive experiment which was ascribed to the interaction of the in situ precipitated CuZr phase and shear bands.

36 MATERIALS SCIENCE↗

Electrical conduction in nanodomains in congruent lithium tantalate single crystal

The electrical current flow behavior was investigated for nanodomains formed in a thin congruent lithium tantalate (LiTaO{sub 3}) single-crystal plate. When the nanodomains were relatively large, with diameters of about 100 nm, current flow was detected along the domain wall. However, when they were about 40 nm or smaller, the current flowed through the entire nanodomain. Schottky-like rectifying behavior was observed. Unlike the case of LiNbO{sub 3}, optical illumination was not required for current conduction in LiTaO{sub 3}. A clear temperature dependence of the current was found indicating that the conduction mechanism for nanodomains in LiTaO{sub 3} may involve thermally activated carrier hopping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗