Search NASA⌕ Search

SEARCH · Search NASA

Results for “sample size”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Sampling Indoor Aerosols on the International Space Station

In a spacecraft cabin environment, the size range of indoor aerosols is much larger and they persist longer than on Earth because they are not removed by gravitational settling. A previous aerosol experiment in 1991 documented that over 90 of the mass concentration of particles in the NASA Space Shuttle air were between 10 m and 100 m based on measurements with a multi-stage virtual impactor and a nephelometer (Liu et al. 1991). While the now-retired Space Shuttle had short duration missions (less than two weeks), the International Space Station (ISS) has been continually inhabited by astronauts for over a decade. High concentrations of inhalable particles on ISS are potentially responsible for crew complaints of respiratory and eye irritation and comments about 'dusty' air. Air filtration is the current control strategy for airborne particles on the ISS, and filtration modeling, performed for engineering and design validation of the air revitalization system in ISS, predicted that PM requirements would be met. However, aerosol monitoring has never been performed on the ISS to verify PM levels. A flight experiment is in preparation which will provide data on particulate matter in ISS ambient air. Particles will be collected with a thermophoretic sampler as well as with passive samplers which will extend the particle size range of sampling. Samples will be returned to Earth for chemical and microscopic analyses, providing the first aerosol data for ISS ambient air.

Thermophoretic sampler↗

Revisiting two thiophosphate compounds constituting d 0 transition metal HfP 2 S 6 and d 10 transition metal α-Ag 4 P 2 S 6 as multifunctional materials for combining second harmonic generation response and photocurrent response

Two acentric thiophosphate compounds, HfP 2 S 6 and α-Ag 4 P 2 S 6 , are revisited and studied as infrared nonlinear optical materials. HfP 2 S 6 and α-Ag 4 P 2 S 6 were structurally characterized without any property measurements. Here, in this work, HfP 2 S 6 and α-Ag 4 P 2 S 6 were synthesized via high temperature salt flux reactions. Low-temperature polymorph acentric α-Ag 4 P 2 S 6 was purified and grown as mm-sized crystals with the aid of AgBr flux. The AgBr flux was revealed to play an important role in stabilizing the acentric α-Ag 4 P 2 S 6 . The acentric α-Ag 4 P 2 S 6 transforms to centrosymmetric β-Ag 4 P 2 S 6 at 850(5) K, which is revealed by differential scanning calorimetry (DSC) analysis and powder X-ray diffraction experiments. HfP 2 S 6 and α-Ag 4 P 2 S 6 are discovered by UV-vis spectrum measurements as indirect bandgap semiconductors with bandgaps of 2.2(1) eV and 2.5(1) eV, respectively, which is supported by DFT calculations and TB-LMTO-ASA calculations. The bonding pictures of α-Ag 4 P 2 S 6 were studied by crystal orbital Hamilton population calculations (COHP) coupled with electron localization function (ELF) analysis. DFT calculations predict that HfP 2 S 6 and α-Ag 4 P 2 S 6 would exhibit different optical performances regardless of being constructed from identical [P 2 S 6 ] motifs. HfP 2 S 6 exhibits a low second harmonic generation (SHG) response, ~0.21 × AGS (for the sample of particle size of 25 μm). α-Ag 4 P 2 S 6 possesses moderate SHG response, ~0.61 × AGS (for the sample of particle size of 225 μm) coupled with a high laser damage threshold (LDT) of ~3.2 × AGS. Characteristics of high ambient stability, moderate bandgap and SHG response, type-I phase-matching capability, and high LDT together with the easy growth of large crystals make α-Ag 4 P 2 S 6 attractive for future infrared nonlinear optical applications. Photocurrent measurements found that α-Ag 4 P 2 S 6 and β-Ag 4 P 2 S 6 have high photocurrent response, 165 nA cm -2 and 135 nA cm -2 , respectively. α-Ag 4 P 2 S 6 is a new multifunctional material of the ternary Ag–P–S system, which combines nonlinear optical (NLO) properties and photocurrent response.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spin glass dynamics at the mesoscale

The mesoscale provides a new probe of spin glass dynamics. Because the spin glass lower critical dimension d l > 2 , the growth of the correlation length ξ ( t , T ) can change the nature of the spin glass state at a crossover time t co when ξ ( t co , T ) = ℓ , a minimum characteristic sample length (e.g., film thickness for thin films and crystallite size for bulk samples). For thin films, and times t < t co such that ξ ( t , T ) < ℓ , conventional three-dimensional dynamics is observed. When t > t co , a crossover to d = 2 behavior takes place. The parallel correlation length, associated with a T g = 0 transition, increases in time from the saturated value of the perpendicular correlation length ℓ to an equilibrium value of the parallel correlation length proportional to T - ν . This results in a pancakelike correlated state, with a thickness ℓ and a temperature-dependent in-plane radius that increases with decreasing temperature. Activated dynamics is associated with these states. Measurements on Cu:Mn thin films are analyzed quantitatively within this framework. We extract a temperature-dependent activation energy from a fit to the frequency dependence of the dynamic susceptibility. The extrapolated temperature at which the activation energy would become large is close to the extrapolated glass transition temperature from ac susceptibility measurements. All known relevant experimental data are consistent with this method. For polycrystalline materials, there is a distribution of length scales P ( ℓ ) . For sufficiently broad distributions, a logarithmic time dependence is derived for the time decay of the thermoremanent magnetization M TRM ( t , T ) using an approach originally derived by Ma. Properties dependent upon an effective waiting time t w eff are derived that are consistent with experiment, and additional measurements are suggested.

36 MATERIALS SCIENCE↗

A versatile apparatus for the fine-tuned synthesis of cluster-based materials

In this paper, a custom-designed experimental setup for the fine-tuned synthesis of various cluster–based materials is presented. Providing custom-designed deposition stages and special sample holders it offers a high degree of control over the sample characteristics such as the cluster size, cluster amounts, and sample homogeneity in combination with high sample purity. The system is capable of producing thin films of pure clusters and various cluster-matrix combinations with cluster sizes ranging from single atoms up to aggregates of several thousand atoms. Two custom-designed deposition stages are available, one utilizes the full cluster beam, yielding micrograms of pure clusters within a few hours and the second one uses mass-separated clusters (mass-resolution between 2% and 10%), yielding nanograms of pure clusters in the same timescale. Furthermore, at the second deposition stage, a variety of matrix materials can be co-deposited at a controlled sample temperature between 153 K and 673 K. In order to prove the capabilities of the apparatus, a series of experiments with Fe clusters embedded in Ag matrices with different volume fractions of clusters were carried out. Energy dispersive X-ray spectroscopy measurements revealed that the amount of deposited clusters as well as the sample homogeneity can be controlled with an outstanding accuracy of 10%. Additional measurements of the magnetic properties indicated the presence of separated clusters for volume fractions of clusters around 2 volume percent (vol. %), while above this concentration (10 vol. %) a partial aggregation of the clusters was observed. It was also shown that the resulting thin films are nearly oxygen free, which ascertains that oxygen sensitive materials can be safely handled in this newly developed apparatus.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Modeling the Stochastic Response of Fiber Reinforced Composites with Varied Representative Volume Element Sizes

Fiber reinforced composites are desirable in applications where low weight and high strength are needed, but are susceptible to variability and flaws during manufacturing, making failure predictions difficult. These flaws may occur at the microscale where mechanical properties vary locally due to regions of fiber clusters and matrix pockets. In this study, a multiscale approach was taken to model 3-point bend, 4-point bend, and tensile experiments of a unidirectional composite from only having microstructure scans of these samples and constituent properties from literature. These scans were sampled with different sized windows, and statistically equivalent microstructures were generated, then simulated for stiffness, strength, and fracture toughness using a reduced order micromechanical model and NASA’s Multiscale Analysis Tool (NASMAT). Mesoscale models were created with equivalent element sizes to microstructures and properties sampled from microscale simulation results. Results showed how microscale size affects certain mechanical properties. Also shown is how well mesoscale models agree to experiments when using stochastic element properties and varying element size.

microstructure↗

Pool Boiling Reliability Tests and Degradation Mechanisms of Microporous Copper Inverse Opal (CuIOs) Structures

The rising power density in electronic systems requires thermal management solutions that are both high-performing and reliable. Porous materials such as Copper Inverse Opal (CuIOs) have unique structural features, including high permeability and high thermal conductivity, to enhance pool boiling performance. However, there is little understanding of the degradation mechanism of such porous materials under pool boiling conditions. In this study, samples of 10 ..mu..m thick CuIOs with 4.8 ..mu..m diameter, covering silicon substrate of area 11 mm x 11 mm, with various heated areas ranging from 2.5 mm x 2.5 mm to 10 mm x 10 mm, were tested in 100 degrees C deionized water at a constant heat flux of 110 Wcm -2 for 3-to-7 days. The combined effect of erosion and corrosion caused structural degradation of the CuIOs. The directly heated area had the most severe degradation while the edge of the heater and the unheated area showed progressively less degradation, maintaining some CuIOs structure even after the 7-day reliability test. Among all the tested samples with various heater sizes, the 2.5 mm x 2.5 mm heater sample - in which the heater size was designed to be comparable to the water bubble characteristic length - had the largest critical heat flux (CHF) up to 300 Wcm -2 with a superheat ~ 13 degrees C. Additionally, CuIOs with a smaller heated area performed better in terms of reliability. This study offers preliminary insights into CuIOs degradation mechanisms, contributing to the development of more robust thermal management solutions. We expect that electroless plating of CuIOs with gold (Au), nickel (Ni), and atomic layer deposition (ALD) aluminum oxide (Al 2 O 3 ) in combination with appropriate application-specific coolants will further improve the reliability and lifetime of the CuIOs.

boiling-induced degradation↗

Pool Boiling Reliability Tests and Degradation Mechanisms of Microporous Copper Inverse Opal (CuIOs) Structures: Preprint

The rising power density in electronic systems requires thermal management solutions that are both high-performing and reliable. Porous materials such as Copper Inverse Opals (CuIOs) have unique structural features, including high permeability and high thermal conductivity, to enhance pool boiling performance. However, there is little understanding of the degradation mechanism of such porous materials under pool boiling conditions. In this study, samples of 10-micrometer-thick CuIOs with 4.8-micrometer diameter, covering silicon substrate of area 11-mm by 11-mm, with various heated areas ranging from 2.5-mm by 2.5-mm to 10-mm by 10-mm, were tested in 100 degrees C deionized water at a constant heat flux of 110 watts per square cm for 3-7 days. The combined effect of erosion and corrosion caused structural degradation of the CuIOs. The directly heated area had the most severe degradation while the edge of the heater and the unheated area showed progressively less degradation, maintaining some CuIOs structure even after the 7-day reliability test. Among all the tested samples with various heater sizes, the 2.5-mm by 2.5-mm heater sample - in which the heater size was designed to be comparable to the water bubble characteristic length - had the largest critical heat flux (CHF) up to 300 watts per square cm with a superheat of approximately 13 degrees C. Additionally, CuIOs with a smaller heated area performed better in terms of reliability. This study offers preliminary insights into CuIOs degradation mechanisms, contributing to the development of more robust thermal management solutions. We expect that electroless plating of CuIOs with gold (Au), nickel (Ni), and atomic layer deposition of aluminum oxide in combination with appropriate application-specific coolants will further improve the reliability and lifetime of the CuIOs.

boiling-induced degradation↗

Probing the Magnetic Causes of CMEs: Free Magnetic Energy More Important Than Either Size Or Twist

To probe the magnetic causes of CMEs, we have examined three types of magnetic measures: size, twist and total nonpotentiality (or total free magnetic energy) of an active region. Total nonpotentiality is roughly the product of size times twist. For predominately bipolar active regions, we have found that total nonpotentiality measures have the strongest correlation with future CME productivity (approx. 75% prediction success rate), while size and twist measures each have a weaker correlation with future CME productivity (approx. 65% prediction success rate) (Falconer, Moore, & Gary, ApJ, 644, 2006). For multipolar active regions, we find that the CME-prediction success rates for total nonpotentiality and size are about the same as for bipolar active regions. We also find that the size measure correlation with CME productivity is nearly all due to the contribution of size to total nonpotentiality. We have a total nonpotentiality measure that can be obtained from a line-of-sight magnetogram of the active region and that is as strongly correlated with CME productivity as are any of our total-nonpotentiality measures from deprojected vector magnetograms. We plan to further expand our sample by using MDI magnetograms of each active region in our sample to determine its total nonpotentiality and size on each day that the active region was within 30 deg. of disk center. The resulting increase in sample size will improve our statistics and allow us to investigate whether the nonpotentiality threshold for CME production is nearly the same or significantly different for multipolar regions than for bipolar regions. In addition, we will investigate the time rates of change of size and total nonpotentiality as additional causes of CME productivity.

Falconer, D. A.↗

EVALUATION OF BALLISTIC DAMAGE IN AN ENCAPSULATED CERAMIC PANEL VIA X-RAY COMPUTED TOMOGRAPHY

X-ray computed tomography (XCT) is an important non-destructive evaluation technique for revealing the spatial distribution of ballistically-induced damage in ceramics. The level of detection and resolution of damage depends on the size of the sample and the parameters of the XCT approach (e.g., focal spot size, magnification, etc.). Previous and ongoing work in this area includes assessment of ballistically induced damage in both individual ceramic targets and ceramic armor panels. Ballistic damage in an encapsulated ceramic armor panel with a metal backing has been scanned and extensively evaluated using XCT 2-D and 3-D analysis. The purpose of using XCT evaluation in this study was to better characterize and understand all of the detectable damage. This information can be used to correlate damage features and types with the physical processes of damage initiation and growth. XCT scans and analyses of damage in the panel will be shown and discussed. This will include virtual 3-D solid visualizations and some quantitative analysis of damage features.

36 MATERIALS SCIENCE↗

High temperature behavior of glass (M-8)

The twofold purpose of this experiment is to obtain data on the occurrence of flow in a viscous glass sphere in microgravity, and to confirm data obtained on Earth for volume-temperature relationships of glass. To do this, a cubic sample of glass laced with gold particles will be heated in the IMF. The sample's properties will be measured at high temperature, and the volume of the sample varied to measure the expansion coefficient. Movement of the gold particles, if any, will determine flow within the sample. The apparatus for this experiment is schematically shown and the photographs of the image furnace with samples before and after melting, respectively. In this apparatus, shape and size of the sample are observed by video camera and recorded by video recorder. The recorded images of the sample are schematically shown. Symbols A, B, and C denote low, intermediate, and high temperatures, respectively. From these images, the volume of the sample is estimated and the temperature dependence of the volume, is obtained. If there is agreement between the data collected in this experiment and data obtained on Earth, it would tend to verify Earth-collected data.

Soga, Naohiro↗

Mineralogy of three slightly palagonitized basaltic tephra samples from the summit of Mauna Kea, Hawaii

The paper characterizes the mineralogy and spectral properties of three slightly palagonitized basaltic tephra samples collected near the summit of Mauna Kea in order to contribute to the basis for inferring mineralogy and processes for Martian surface materials. The mineralogy of size fractions of these samples is examined by diffuse reflectance and FIR spectroscopy, optical microscopy, X-ray diffraction, Moessbauer spectroscopy, magnetic analysis, EMPA, TEM, and SEM. For the 20-1000 micron size fraction, sample HWMK11 (red) is essentially completely oxidized and has a hematite (Ti-hematite) pigment dispersed throughout the silicate matrix. Sample HWMK12 (black) has the lowest proportion of ferric-bearing phases and is thus least weathered. For HWMK11, the amount of hematite is essentially constant, and mica is present only in the coarse clay-sized fraction; smectites are low in structural Fe.

Golden, D. C.↗

Fitting Leak Test Report: Ground-Based Cryogenic Leak Test of Fittings for Cryogenic Fluid Management

EXECUTIVE SUMMARY Mechanically connected joints used in cryogenic fluid lines as part of space flight elements need to survive launch vibrations and remain leak-free to minimize the loss of on-board commodity and hazardous gas accumulation. In 2020, a cryogenic test apparatus was developed which can evaluate the leak performance of pressurized threaded fluid fittings. The fittings were mounted in the TVAC and cooled to cryogenic test temperature and pressurized with helium while the leak rate was measured using a calibrated GHe leak detector. The test articles for the initial proof of concept testing were ¼ and 1 inch Swagelok VCR fittings with three different types of seal rings copper, nickel, and Ni. Each fitting configuration (size/seal material) was subjected to two consecutive cryogenic thermal cycles, followed by exposure to a launch vibration profile at ambient temperature, after which two additional TVAC cycle tests were performed. The testing reported here is a continuation of the 2020 tests with a statistically significant large number of samples and test runs. Three Swagelok VCR fitting sizes were tested ¼, ½ and 1 inch, and five (5) samples of each fitting size, each sample was tested with SST and Ni seal rings (Total of 30 unique test articles). Each test article was subjected to four (4) thermal cycles. Half of these cycles were performed before vibration testing and half were performed after vibration testing. The vibration testing was performed to evaluate the ability of the fittings to survive launch-type vibration profiles and remain leak-free. Leak checking of each fitting was completed at temperatures between 20K – 30K. The test procedure in Section 8.0 was designed to facilitate a qualification test program by allowing a higher test throughput rate coupled with repeatable test profiles. Results were very positive and show that out of the 30 samples they all passed with leak rates a factor of 2-3 lower than the established 10-6sccs GHe leak threshold. The result showed the Ni seals had lower leak rate, but the SST was more rugged. There were two deviations where damage to the Ni seal ring during assembly resulted in a leaky fitting, this is discussed in Section 10.7 Test Deviations. These fittings show great promise for space flight use and further testing is recommended to fully qualify the fittings per the ASTM F1387-19 and/or other relevant NASA specifications. The test equipment hardware and software capability developed for this testing is generic and not restricted to VCR fittings. It can be employed to evaluate/qualify the leak performance of other types of fittings and a wide range of other cryogenic fluid components such as valves, gages, connectors, etc.

Cryogenic↗

Sampling stratospheric aerosols with impactors

Derivation of statistically significant size distributions from impactor samples of rarefield stratospheric aerosols imposes difficult sampling constraints on collector design. It is shown that it is necessary to design impactors of different size for each range of aerosol size collected so as to obtain acceptable levels of uncertainty with a reasonable amount of data reduction.

Oberbeck, Verne R.↗

Exchange bias effect in Au-Fe3O4 dumbbell nanoparticles induced by the charge transfer from gold

We have studied the origin of the exchange bias effect in the Au-Fe3O4 dumbbell nanoparticles in two samples with different sizes of the Au seed nanoparticles (4.1 and 2.7 nm) and same size of Fe3O4 nanoparticles (9.8 nm). The magnetization, small-angle neutron-scattering, synchrotron x-ray diffraction, and scanning transmission electron microscope measurements determined the antiferromagnetic FeO wustite phase within Fe3O4 nanoparticles, originating at the interface with the Au nanoparticles. The interface between antiferromagnetic FeO and ferrimagnetic Fe3O4 is giving rise to the exchange bias effect. The strength of the exchange bias fields depends on the interfacial area and lattice mismatch between both phases. We propose that the charge transfer from the Au nanoparticles is responsible for a partial reduction of the Fe3O4 into the FeO phase at the interface with Au nanoparticles. The Au-O bonds are formed, presumably across the interface to accommodate an excess of oxygen released during the reduction of magnetite

Feygenson, Mikhail↗

Compact galaxies and the size–mass galaxy distribution from a colour-selected sample at 0.04 < z < 0.15 supplemented by ugrizYJHK photometric redshifts

ABSTRACT The size–mass galaxy distribution is a key diagnostic for galaxy evolution. Massive compact galaxies are potential surviving relics of a high-redshift phase of star formation. Some of these could be nearly unresolved in Sloan Digital Sky Survey (SDSS) imaging and thus not included in galaxy samples. To overcome this, a sample was selected from the combination of SDSS and UKIRT Infrared Deep Sky Survey (UKIDSS) photometry to r < 17.8. This was done using colour–colour selection, and then by obtaining accurate photometric redshifts (photo-z) using scaled flux matching (SFM). Compared to spectroscopic redshifts (spec-z), SFM obtained a 1σ scatter of 0.0125 with only 0.3 per cent outliers (|Δln (1 + z)| > 0.06). A sample of 163 186 galaxies was obtained with 0.04 < z < 0.15 over $2300\, {\rm deg}^2$ using a combination of spec-z and photo-z. Following Barro et al. log Σ1.5 = log M* − 1.5log r50, maj was used to define compactness. The spectroscopic completeness was 76 per cent for compact galaxies (log Σ1.5 > 10.5) compared to 92 per cent for normal-sized galaxies. This difference is primarily attributed to SDSS ‘fibre collisions’ and not the completeness of the main galaxy sample selection. Using environmental overdensities, this confirms that compact quiescent galaxies are significantly more likely to be found in high-density environments compared to normal-sized galaxies. By comparison with a high-redshift sample from 3D-HST, log Σ1.5 distribution functions show significant evolution, with this being a compelling way to compare with simulations such as EAGLE. The number density of compact quiescent galaxies drops by a factor of about 30 from z ∼ 2 to log (n/Mpc−3) = − 5.3 ± 0.4 in the SDSS–UKIDSS sample. The uncertainty is dominated by the steep cut off in log Σ1.5, which is demonstrated conclusively using this complete sample.

Baldry, Ivan K.↗

Grain size dependence of dynamic mechanical behavior of AZ31B magnesium alloy sheet under compressive shock loading

The effects of grain size on the dynamic deformation behavior of rolled AZ31B alloy at high strain rates were investigated. Rolled AZ31B alloy samples with grain sizes of 6, 18 and 37 μm, were subjected to shock loading tests using Split Hopkinson Pressure Bar at room temperature and at a strain rate of 1100 s{sup −} {sup 1}. It was found that a double-peak basal texture formed in the shock loaded samples. The strength and ductility of the alloy under the high strain-rate compressive loading increased with decreasing grain size. However, twinning fraction and strain hardening rate were found to decrease with decreasing grain size. In addition, orientation imaging microscopy showed a higher contribution of double and contraction twins in the deformation process of the coarse-grained samples. Using transmission electron microscopy, pyramidal dislocations were detected in the shock loaded sample, proving the activation of pyramidal slip system under dynamic impact loading. - Highlights: • A double-peak basal texture developed in all shock loaded samples. • Both strength and ductility increased with decreasing grain size. • Twinning fraction and strain hardening rate decreased with decreasing grain size. • ‘g.b’ analysis confirmed the presence of dislocations in shock loaded alloy.

36 MATERIALS SCIENCE↗

Thermal Behavior and Structural Analysis of Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5}(LTP) System

This study focuses on the preparation of Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5}(LTP) by mechanical milling (MM) method at 600 rpm. The samples were milled for 40 hours using 5 mm size ball-mill. The samples underwent different heat treatment and its conductivity behavior was investigated. Thermal and structural analysis of the highest conducting LTP system was investigated by means of TGA-DSC, XRD, and laser particle sizer respectively. An increase in the crystallinity of the samples was observed with increase in sintering temperature. The particle sizes of the samples were also observed to increase with increase in crystallinity. The samples that underwent heat treatment exhibit higher conductivity values with a value of 5.59x10{sup -4} Scm{sup -1} at 800 deg. C.

36 MATERIALS SCIENCE↗

Structural and surface morphological study of Ni doped ZnS nanoparticles

Samples of Zn{sub 1−x}Ni{sub x}S (x=0.00, 0.04, 0.08) nanoparticles were synthesized by using the co-precipitation method at room temperature. Structural parameters were investigated by X – ray diffraction (XRD), it reveals that all samples of Ni doped ZnS exhibit the cubic structure with no additional impurity phase. The average crystallite size of all samples is in the range of 2.70 to 2.90 nm. The lattice parameters, X – ray density, volume of unit cell and grain size were calculated using XRD data. It is found that the lattice parameter increases with increasing Ni concentration. Surface morphology of samples was investigated using field emission scanning electron microscopy (FE-SEM). From this study it is concluded that samples exhibit cubic morphology. Chemical compositions of Ni doped and pure ZnS samples were detected using EDAX spectra. It is confirmed from EDAX that Ni substitute into ZnS lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗