Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Observation of e⁺e⁻ → pp$\bar{p}\bar{n}\pi^-$ + c. c.

Using data taken at 29 center-of-mass energies between 4.16 and 4.70 GeV with the BESIII detector at the Beijing Electron Positron Collider corresponding to a total integrated luminosity of approximately 18.8 fb -1 , the process e⁺e⁻ → pp$\overline{p}\overline{n}\pi^-$ + c. c. is observed for the first time with a statistical significance of 11.5σ. The average Born cross sections in the energy ranges of (4.160, 4.380) GeV, (4.400, 4.600) GeV and (4.610, 4.700) GeV are measured to be (21.5 ± 5.7 ± 1.2) fb, (46.3 ± 10.6 ± 2.5) fb and (59.0 ± 9.4 ± 3.2) fb, respectively, where the first uncertainties are statistical and the second are systematic. The line shapes of the $\overline{p}\overline{n}$ and ppπ⁻ invariant mass spectra are consistent with phase space distributions, indicating that no hexaquark or di-baryon state is observed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Efficient calculation of self magnetic field, self-force, and self-inductance for electromagnetic coils with rectangular cross-section

Abstract For designing high-field electromagnets, the Lorentz force on coils needs to be computed in order to design suitable support structures, and the inductance should be computed to evaluate the stored energy and dynamics. Also, the magnetic field and its variation inside the conductor is of interest for computing stress and strain, and due to superconducting quench limits. For these force, inductance, energy, and internal field calculations, the coils cannot be naively approximated as infinitesimally thin filaments due to divergences when the source and evaluation points coincide, so more computationally demanding calculations are usually required, resolving the finite cross-section of the conductors. Here, we present a new alternative method that enables the internal magnetic field vector, self-force, and self-inductance to be computed rapidly and accurately within a 1D filament model. The method is applicable to coils for which the curve center-line can have general noncircular shape, as long as the conductor width is small compared to the radius of curvature. This paper extends a previous calculation for circular-cross-section conductors (Hurwitz et al 2024 IEEE Trans. Magn. ) to consider the case of rectangular cross-section. The reduced model is derived by rigorous analysis of the singularity, regularizing the filament integrals such that they match the true high-dimensional integrals at high coil aspect ratio. The new filament model exactly recovers analytic results for a circular coil, and is shown to accurately reproduce full finite-cross-section calculations for a non-planar coil of a stellarator magnetic fusion device. Due to the efficiency of the model here, it is well suited for use inside design optimization.

Landreman, Matt (ORCID:000000027233577X)↗

Long-term warming modulates diversity, vertical structuring of microbial communities, and sulfate reduction in coastal Baltic Sea sediments

Coastal waters such as those found in the Baltic Sea already suffer from anthropogenic related problems including increased algal blooming and hypoxia while ongoing and future climate change will likely worsen these effects. Microbial communities in sediments play a crucial role in the marine energy- and nutrient cycling, and how they are affected by climate change and shape the environment in the future is of great interest. The aims of this study were to investigate potential effects of prolonged warming on microbial community composition and nutrient cycling including sulfate reduction in surface (∼0.5 cm) to deeper sediments (∼ 24 cm). To investigate this, 16S rRNA gene amplicon sequencing was performed, and sulfate concentrations were measured and compared between sediments in a heated bay (which has been used as a cooling water outlet from a nearby nuclear power plant for approximately 50 years) and a nearby but unaffected control bay. The results showed variation in overall microbial diversity according to sediment depth and higher sulfate flux in the heated bay compared to the control bay. A difference in vertical community structure reflected increased relative abundances of sulfur oxidizing- and sulfate reducing bacteria along with a higher proportion of archaea, such as Bathyarchaeota, in the heated compared to the control bay. This was particularly evident closer to the sediment surface, indicating a compression of geochemical zones in the heated bay. These results corroborate findings in previous studies and additionally point to an amplified effect of prolonged warming deeper in the sediment, which could result in elevated concentrations of toxic compounds and greenhouse gases closer to the sediment surface.

16S rRNA gene amplicon↗

The International Soil Moisture Network: serving Earth system science for over a decade

In 2009, the International Soil Moisture Network (ISMN) was initiated as a community effort, funded by the European Space Agency, to serve as a centralised data hosting facility for globally available in situ soil moisture measurements (Dorigo et al., 2011b, a). The ISMN brings together in situ soil moisture measurements collected and freely shared by a multitude of organisations, harmonises them in terms of units and sampling rates, applies advanced quality control, and stores them in a database. Users can freely retrieve the data from this database through an online web portal (https://ismn.earth/en/, last access: 28 October 2021). Meanwhile, the ISMN has evolved into the primary in situ soil moisture reference database worldwide, as evidenced by more than 3000 active users and over 1000 scientific publications referencing the data sets provided by the network. As of July 2021, the ISMN now contains the data of 71 networks and 2842 stations located all over the globe, with a time period spanning from 1952 to the present. The number of networks and stations covered by the ISMN is still growing, and approximately 70% of the data sets contained in the database continue to be updated on a regular or irregular basis. The main scope of this paper is to inform readers about the evolution of the ISMN over the past decade, including a description of network and data set updates and quality control procedures. A comprehensive review of the existing literature making use of ISMN data is also provided in order to identify current limitations in functionality and data usage and to shape priorities for the next decade of operations of this unique community-based data repository.

54 ENVIRONMENTAL SCIENCES↗

Pressure-Dependent Phase Behavior of Chemically Synthesized Ytterbium Hydride Nanoparticles and Confinement in CMK-3

In this work, we developed a chemical synthesis protocol to prepare both spherical and rod shaped YbH x nanoparticles and infiltrate a mesoporous CMK-3 structure with YbH x nanoparticles. The phase evolution of the YbH x nanoparticles was monitored as a function of the pressure in a diamond anvil cell. The cell volume of the Yb atom showed an unexpected positive deviation from the calculated equation of state (EoS) for the α-phase (space group Pnma) of YbH x . Additionally, the β-phase (space group Fm3̅m) YbH x nanoparticles appeared to become amorphous at approximately 27 GPa, although the same behavior was not observed in the Pnma (α-phase). The Pmna phase remained stable (measured up to 59.3 GPa) and showed a significantly higher than expected volume per Yb atom relative to the calculated EoS. This deviation could be attributed to the nanoscale effect on the thermodynamics of ytterbium hydride formation, which could provide a path forward to accessing higher order ytterbium hydrides (YbH x , x > 3) at pressures much lower than in the bulk metal.

diamond anvil cell↗

Stability and dynamical properties of Cooper-Shepard-Sodano compactons

Extending a Pade approximant method used for studying compactons in the Rosenau-Hyman (RH) equation, we study the numerical stability of single compactons of the Cooper-Shepard-Sodano (CSS) equation and their pairwise interactions. The CSS equation has a conserved Hamiltonian which has allowed various approaches for studying analytically the nonlinear stability of the solutions. We study three different compacton solutions and find they are numerically stable. Similar to the collisions between RH compactons, the CSS compactons re-emerge with same coherent shape when scattered. The time evolution of the small-amplitude ripple resulting after scattering depends on the values of the parameters l and p characterizing the corresponding CSS equation. The simulation of the CSS compacton scattering requires a much smaller artificial viscosity to obtain numerical stability than in the case of RH compacton propagation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Neutron Response of the EJ-254 Boron-Loaded Plastic Scintillator

Organic scintillators doped with capture agents provide a detectable signal for neutrons over a broad energy range. This work characterizes the fast and slow neutron response of EJ-254, an organic plastic scintillator with 5 loading by weight. For fast neutrons, the primary mechanism for light generation in organic scintillators is n-p elastic scattering. To study the fast neutron response, the proton light yield of EJ-254 was measured at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory. Using a broad-spectrum neutron source and a double time-of-flight technique, the EJ-254 proton light yield was obtained over the energy range of approximately 270 keV to 4.5 MeV and determined to be in agreement with other plastic scintillators comprised of the same polymer base. To isolate the slow neutron response, an AmBe source with polyethylene moderator was made incident on the EJ-254 scintillator surrounded by an array of EJ-309 observation detectors. Events in the EJ-254 target coincident with the signature 477.6 keV γ ray (resulting from de-excitation of the residual 7Li nucleus following boron neutron capture) were identified. Pulse shape discrimination was used to evaluate the temporal differences in the response of EJ-254 scintillation signals arising from γ-ray and fast/slow neutron interactions. Clear separation between γ-ray and fast neutrons signals was not achieved and the neutron capture feature was observed to overlap both the γ-ray and fast neutron bands. Taking into account the electron light nonproportionality, the neutron capture light yield in EJ-254 was determined to be 89.4±1.1 keVee.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Angular Selectivity of Amplitude-Phase Holographic Gratings in Polymer Material with Phenanthrenequinone

The values of the amplitudes of the refractive index and absorption coefficient modulations in volume hologram gratings, which were recorded in a polymer material with phenanthrenequinone (PQ), have been determined by the results of the approximation of the angular selectivity contours, which were measured at wavelengths of 450, 473, 532, and 633 nm before and after the development of holograms, resulting from the diffusion of PQ molecules in a glassy polymer. Immediately after recording, before the diffusion development, the holograms are mixed amplitude-phase in the PQ absorption spectral region and phase for the red light, which is not absorbed by it (633 nm), and become purely phase during the development regardless of the wavelength. The shape of the selectivity contour of the undeveloped hologram indicates the counterphase between the modulations of the absorption coefficient and refractive index, illustrating the concept of complementary gratings, on which the principle of hologram formation in the material under consideration is based.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theoretical and experimental study of the dynamic response of absorber-based, micro-scale, oscillatory probes for contact sensing applications

This paper presents two models for predicting the frequency response of micro-scale oscillatory probes. These probes are manufactured by attaching a thin fiber to the free end of one tine of a quartz tuning fork oscillator. In these studies, the attached fibers were either 75 μm diameter tungsten or 7 μm diameter carbon with lengths ranging from around 1 to 15 mm. The oscillators used in these studies were commercial 32.7 kHz quartz tuning forks. The first theoretical model considers lateral vibration of two beams serially connected and provides a characteristic equation from which the roots (eigenvalues) are extracted to determine the natural frequencies of the probe. A second, lumped model approximation is used to derive an approximate frequency response function for prediction of tine displacements as a function of a modal force excitation corresponding to the first mode of the tine in the absence of a fiber. These models are used to evaluate the effect of changes in both length and diameter of the attached fibers. Theoretical values of the natural frequencies of different modes show an asymptotic relationship with the length and a linear relationship with the diameter of the attached fiber. Similar results are observed from experiment, one with a tungsten probe having an initial fiber length of 14.11 mm incrementally etched down to 0.83 mm, and another tungsten probe of length 8.16 mm incrementally etched in diameter, in both cases using chronocoulometry to determine incremental volumetric material removal. The lumped model is used to provide a frequency response again reveals poles and zeros that are consistent with experimental measurements. Finite element analysis shows mode shapes similar to experimental microscope observations of the resonating carbon probes. This model provides a means of interpreting measured responses in terms of the relative motion of the tine and attached fibers. Of particular relevance is that, when a “zero” is observed in the response of the tine, one mode of the fiber is matched to the tine frequency and is acting as an absorber. This represents an optimal condition for contact sensing and for transferring energy to the fiber for fluid mixing, touch sensing, and surface modification applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Lattice Dynamics and the Optical Properties of Semiconductors: Theory of the Temperature Dependent Dielectric Functions of GaAs and Si and Comparison with Experiment

A novel method for calculating the temperature dependencies of the linear dielectric functions of semiconductors is described, in which the lattice vibrations are represented by thermally-perturbed atomic configurations extracted from molecular dynamics (MD) simulations. Our theoretical results for bulk GaAs and Si in the range from 0 to 930 K are in good overall agreement with highly accurate ellipsometric measurements. The implementation of the method resolves a serious discrepancy in energy and line shape between experiment and the latest optical models, all of which neglect lattice dynamics and provide information on the indirect optical transitions and indirect gap in Si.

36 MATERIALS SCIENCE↗

The efficacy of event isotropy as an event shape observable

Event isotropy $\mathcal{I}$ sph , an event shape observable that measures the distance of a final state from a spherically symmetric state, is designed for new physics signals that are far from QCD-like. Using a new technique for producing a wide variety of signals that can range from near-spherical to jetty, we compare event isotropy to other observables. We show that thrust T and the C parameter (and λ max , the largest eigenvalue of the sphericity matrix) are strongly correlated and thus redundant, to a good approximation. By contrast, event isotropy adds considerable information, often serving to break degeneracies between signals that would have almost identical T and C distributions. Signals with broad distributions in T (or λ max ) and in $\mathcal{I}$ sph separately often have much narrower distributions, and are more easily distinguished, in the ($\mathcal{I}$ sph , λ max ) plane. An intuitive, semi-analytic estimation technique clarifies why this is the case and assists with the interpretation of the distributions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A novel xylosylated fucoglucuronan in Penium reveals structural parallels to rhamnogalacturonan-I and its broad evolutionary footprint in lower plants

Green algae inhabit aquatic environments across the planet and play a crucial role in sustaining the global ecosystem. Ancestors of some Charophytes adapted to terrestrial conditions and eventually evolved into land plants. Extant green algae have inherited traits from their ancestors and evolved into their current morphological and chemical forms, as reflected by their cell walls with distinct shapes and compositions. To illuminate the evolution of plant cell walls and bridge the gap between green algae and land plants, we investigated the charophyte Penium margaritaceum, a close relative of terrestrial plants. We discovered a previously unknown polysaccharide in both its culture medium and cell wall. This polysaccharide, termed xylosylated fucoglucuronan (XFG), possesses a rhamnogalacturonan-I (RG-I)-like backbone composed of repeating [-3-α-Fucp-(1,4)-α-GlcpA-] disaccharides that are extensively xylosylated and acetylated. Surveying approximately 20 non-vascular plants revealed that XFG and RG-I (or related structures) first emerge in certain Chlorophyceae and subsequently co-occur throughout lineages along the evolutionary trajectory to bryophytes, thereby bridging aquatic green algae to early land plants. The striking structural parallels between XFG, RG-I, and ulvan suggest a shared evolutionary origin, offering new insight into how plant cell walls adapted during the transition from marine to freshwater environments and ultimately to land.

Algae↗

Magnetic well and Mercier stability of stellarators near the magnetic axis

We have recently demonstrated that by expanding in small distance from the magnetic axis compared with the major radius, stellarator shapes with low neoclassical transport can be generated efficiently. To extend the utility of this new design approach, here we evaluate measures of magnetohydrodynamic interchange stability within the same expansion. In particular, we evaluate the magnetic well, Mercier's criterion, and resistive interchange stability near a magnetic axis of arbitrary shape. In contrast to previous work on interchange stability near the magnetic axis, which used an expansion of the flux coordinates, here we use the ‘inverse expansion’ in which the flux coordinates are the independent variables. Reduced expressions are presented for the magnetic well and stability criterion in the case of quasisymmetry. The analytic results are shown to agree with calculations from the VMEC equilibrium code. Finally, we show that near the axis, Glasser, Greene and Johnson's stability criterion for resistive modes approximately coincides with Mercier's ideal condition.

Physics↗

Transmission integral analysis of Mössbauer spectra displaying hyperfine parameter distributions with arbitrary profile

Accurate quantitative analysis of Mössbauer spectra displaying thickness effects requires the consideration of the so-called transmission integral when modeling the spectral shape. Whereas this is straightforward when the correct model for the decomposition of the absorber's nuclear resonance absorption cross-section into individual components is a priori known, in the absence of such knowledge and notably in the presence of hyperfine parameter distributions with an unknown profile, the so-called model-independent evaluation methods could be used to fit the spectra. However, the methods available for this purpose were developed for the analysis of spectra for which the thin absorber approximation is valid, and thus they do not take the sample thickness and related effects into account. Consequently, in order to use them for spectra displaying thickness effects, their usage needs to be generalized by combining them with transmission integral fitting. A new algorithm realizing such a generalized version of the Hesse-Rübartsch model-independent evaluation method was developed recently as an integral part of the MossWinn program. In the present work, the working principle of the newly developed algorithm is described in details along with examples illustrating the capabilities of the method for the case of {sup 57}Fe Mössbauer spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New insight into the helium-induced damage in MAX phase Ti{sub 3}AlC{sub 2} by first-principles studies

In the present work, the behavior of He in the MAX phase Ti{sub 3}AlC{sub 2} material is investigated using first-principle methods. It is found that, according to the predicted formation energies, a single He atom favors residing near the Al plane in Ti{sub 3}AlC{sub 2}. The results also show that Al vacancies are better able to trap He atoms than either Ti or C vacancies. The formation energies for the secondary vacancy defects near an Al vacancy or a C vacancy are strongly influenced by He impurity content. According to the present results, the existence of trapped He atoms in primary Al vacancy can promote secondary vacancy formation and the He bubble trapped by Al vacancies has a higher tendency to grow in the Al plane of Ti{sub 3}AlC{sub 2}. The diffusion of He in Ti{sub 3}AlC{sub 2} is also investigated. The energy barriers are approximately 2.980 eV and 0.294 eV along the c-axis and in the ab plane, respectively, which means that He atoms exhibit faster migration parallel to the Al plane. Hence, the formation of platelet-like bubbles nucleated from the Al vacancies is favored both energetically and kinetically. Our calculations also show that the conventional spherical bubbles may be originated from He atoms trapped by C vacancies. Taken together, these results are able to explain the observed formation of bubbles in various shapes in recent experiments. This study is expected to provide new insight into the behaviors of MAX phases under irradiation from electronic structure level in order to improve the design of MAX phase based materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring high-frequency properties of permalloy films via submicron patterning.

We have measured shape-induced high frequency properties of patterned submicrometer permalloy (Py) arrays. We sputtered and patterned Py films on gold (Au) transmission lines, using chromium (Cr) as adhesion layers for Au and Py deposition. Each Py bar in the arrays is 10 mum long and 100 nm thick. The widths of the Py bars in two different arrays are 240 and 550 nm, respectively. Micromagnetic simulations indicate single domain magnetization distribution in these Py structures. The measured ferromagnetic resonance frequencies without bias field are approximately 11.5 and 8 GHz, respectively. We obtained the corresponding susceptibilities. The experimental results agree with theoretical predictions.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Evaluation of Molybdenum as a Surrogate for Iridium in the GPHS Weld Development

The welding equipment used for welding iridium containers (clads) at Los Alamos National Laboratory is twenty five years old and is undergoing an upgrade. With the upgrade, there is a requirement for requalification of the welding process, and the opportunity for process improvement. Testing of the new system and requalification will require several welds on iridium test parts and clads, and any efforts to improve the process will add to the need for iridium parts. The extreme high cost of iridium imposes a severe limitation on the extent of test welding that can be done. The 2 inch diameter, 0.027 inch thick, iridium blank disc that the clad cup is formed from, is useful for initial weld trials, but it costs $5000. The development clad sets needed for final tests and requalification cost $15,000 per set. A solution to iridium cost issue would be to do the majority of the weld development on a less expensive surrogate metal with similar weld characteristics. One such metal is molybdenum. Since its melting index (melting temperature x thermal conductivity) is closest to iridium, welds on molybdenum should be similar in size for a given weld power level. Molybdenum is inexpensive; a single 2 inch molybdenum disc costs only $9. In order to evaluate molybdenum as a surrogate for iridium, GTA welds were first developed to provide full penetration on 0.030 inch thick molybdenum discs at speeds of 20, 25, and 30 inches per minute (ipm). These weld parameters were then repeated on the standard 0.027 inch thick iridium blanks. The top surface and bottom surface (root) width and grain structure of the molybdenum and iridium welds were compared, and similarities were evident between the two metals. Due to material and thickness differences, the iridium welds were approximately 35% wider than the molybdenum welds. A reduction in iridium weld current of 35% produce welds slightly smaller than the molybdenum welds yet showed that current could be scaled according to molybdenum/iridium weld width ratio to achieve similar welds. Further weld trials using various thicknesses of molybdenum determined that 0.024 inch thick molybdenum material would best match the 0.027 inch thick iridium in achieving comparable welds when using the same welding parameters. Across the range of welding speeds, the characteristic weld pool shape and solidification grain structure in the two materials was also similar. With the similarity of welding characteristics confirmed, and the appropriate thickness of molybdenum determined, it has been concluded that the use of molybdenum discs and tube sections will greatly expand the weld testing opportunities prior to iridium weld qualification

Engineering(42)↗