Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Preliminary Planning for NEAR's Low-Altitude Operations at 433 Eros

On February 14, 2000, an orbit insertion burn will place NASA's Near Earth Asteroid Rendezvous (NEAR) spacecraft (S/C) into orbit around asteroid 433 Eros. NEAR will initially orbit Eros with distances ranging from 500 to 100 km in order to characterize the shape, gravity and spin of Eros. Once the physical parameters of Eros are determined reasonably well, the plan is to establish an orbit of the NEAR S/C with increasingly lower altitudes as the one year orbital mission progresses while further characterizing the gravity and shape of Eros. Towards the end of the NEAR mission, after the shape, gravity and spin of Eros have been well characterized, the scientific interest of obtaining very close observations (< 5 km) can be realized. The navigation during this phase relies on a combination of NASA's Deep Space Network (DSN) radio metric tracking, laser ranging (LIDAR) data from the S/C to the surface of Eros, and onboard optical imaging of landmarks on Eros. This paper will provide preliminary plans for mission design and navigation during the last two months of the orbit phase, where several close passes to the surface will be incorporated to enhance the science return. The culmination of these close passes will result in the eventual landing of the S/C on the surface of Eros. Several considerations for these plans are given by Antreasian, et at. [1998]. The objective for the end of the mission will be to land the S/C autonomously using the surface relative information obtained from the onboard LIDAR instrument. The goal will be to soft land the S/C in such a way as to keep it operational. With the use of an onboard LIDAR landing algorithm as discussed by Antreasian et at. [1998], it is believed that the S/C impact velocity can be kept well under 7 m/s which is a requirement for allowing the S/C to remain operational.

Antreasian, P. G.↗

ICESat-2 Mission: Status, Outlook, and Contributions to Polar Science

The Ice, Cloud and land Elevation Satellite-2 (ICESat-2) mission carries the Advanced Topographic Laser Altimeter System (ATLAS) lidar to measure the changing height of Earth surface. After more than 3 years of science data collection, ATLAS has emitted well over a trillion laser pulses and continues to operate nominally. The ICESat-2 data products were initially released in May 2019, and have been used in over 150 peer-reviewed publications to date. Recent community white papers have noted the importance of ice elevation measurements for the coming decades, and as CryoSat-2 has entered it’s second decade and future missions are uncertain, ICESat-2 will be a critical part of the Earth System Observatory for the 2020s. In the polar regions, ICESat-2 has enabled year-round sea ice freeboard measurements as well as ice sheet elevation changes on seasonal, annual, and decadal time scales when combined with other missions. These data enable measurement of change at fine spatial and temporal scales to help understand or characterize the processes driving these observations. As of this presentation, Release 005 is the current version of the along-track data products, including surface-specific products for sea ice, land ice, ground and canopy height, ocean, and inland water heights. In addition, first versions of gridded data products for land ice, sea ice, and ocean are all available. Data spans the start of the mission (14 October 2018) through early 2022. The ICESat-2 project has also begun to produce and distribute QuickLook products with a nominal 3-day latency (as opposed to the ~45-day latency of the final data products). Initial versions of these QuickLook products have elevation accuracy of ~3 meters, and geolocation accuracy of ~50 meters. All products are available through the National Snow and Ice Data Center (nsidc.org). This presentation will summarize the current state and health of the observatory, current state of the ICESat-2 data products, data product quality assessment, and outlook for the future.

ICESat-2↗

AFM Special Issue Summary - Integrating Surface Flux with Boundary Layer Measurements

To help bridge science topics related to land-atmosphere interactions, we organized a virtual special issue in this journal (Agricultural and Forest Meteorology [AFM]) entitled, “Land-Atmosphere Interactions: Integrating Surface Flux with Boundary Layer Measurements.” The motivation for the special issue was driven by existing disciplinary barriers between research areas that all address land-atmosphere interactions. In particular, it addressed research silos between those who study features of the land surface, surface fluxes (including water, energy, and trace gases), atmospheric boundary layer growth and thermodynamics, and atmospheric composition and aerosols. The special issue sought to bring these communities together to integrate multiple observations across the soil-vegetation-atmosphere continuum with the aim of 1) improving broader understanding of land-atmosphere interactions, feedbacks, and coupling, 2) fostering new collaborations between atmospheric and surface flux scientists, and 3) identifying new paths for integrative research. In this report we provide an overview and synthesis of the special issue.

58 GEOSCIENCES↗

Crystal structure and shape selection in the growth of 3D metallic crystallites on layered materials: Fe on MoS 2

Nucleation and growth of supported 3D metal clusters or crystallites during deposition on MoS 2 , or on other weakly-adhering layered materials, can potentially produce diverse growth shapes, and even crystal structures differing from the bulk metal. For Fe deposition on MoS 2 , SEM and AFM observations reveal three distinct crystallite shapes. By comparison with atomistic structure models incorporating realistic Fe-MoS 2 interface structures, here we conclude that these are: triangular fcc(111) pyramids with sloped {100} side facets; bcc(110) A-frame tents with sloped {100} side facets; and bcc(110) mesas with vertical {100} and {110} side facets. The following picture is proposed for the competitive formation of clusters and crystallites with different structures: (i) small nanoclusters formed at the onset of deposition exhibit facile fluxional dynamics allowing sampling of different crystal structures and shapes; (ii) sufficient fluxionality implies a Boltzmann distribution of sampled structures, and thus coexistence of different structures follows from the demonstrated similar energies for those structures; (iii) growing clusters reach a threshold size above which the characteristic time scale for restructuring exceeds that for cluster growth. Thereafter, clusters are locked-in to a specific crystal structure and shape as revealed by imaging of larger crystallites. Despite a penalty for fcc(111) over bcc(111) pyramids based on bulk energetics, favorable surface and interface energies makes them preferable for smaller sizes.

36 MATERIALS SCIENCE↗

Tuning Surface Adhesion Using Grayscale Electron-beam Lithography

Surface texturing of manufactured products tailors their properties, such as friction, adhesion, biocompatibility, or fluid interactions. However, advancements in this area are largely the result of trial-and-effort testing and generally lack a science-guided framework for determining the surface topography that will optimize performance. The present investigation explores grayscale electron-beam lithography as a means to create multiscale surface patterns to control surface performance. Here, we created and characterized a set of surface textures on a silicon wafer; the textures were superpositions of sine waves of varying wavelengths and amplitudes. First, the multiscale topography of the patterned surface was characterized, using profilometry and atomic force microscopy, to understand its fidelity to the designed-in pattern. The results of this analysis demonstrated how grayscale lithography accurately controlled the lateral size of features but was less precise on the vertical height of the surface, and also introduced inherent roughness below the scale of patterning. Second, a micromechanical tester was used to characterize the adhesion of the surfaces with large-scale polished silicon spheres. The results showed that adhesion could be tailored, with significant contribution from all of the designed-in length scales of topography. The strength of adhesion did not correlate with conventional roughness parameters but could be accurately modeled using simple numerical integration. Taken together, this investigation demonstrates the promise and challenges of grayscale e-beam lithography with multiscale patterns as a method for the tailoring of surface performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Remote Laser-mass Spectrometer for Determination of Elemental Composition

Determination of the elemental composition of lunar, asteroid, and planetary surfaces is a major concern for science and resource utilization of space. The science associated with the development of a satellite or lunar rover laser-mass spectrometer instrument is presented here. The instrument would include a pulsed laser with sufficient energy to create a plasma on a remote surface. Ions ejected from this plasma travel back to the spacecraft or rover, where they are analyzed by a time-of-flight mass spectrometer, giving the elemental and isotope composition. This concept is based on the LIMA-D instrument on board the former Soviet Union Phobos-88 spacecraft sent to Mars. A laser-mass spectrometer placed on a rover or satellite would substantially improve the data return over alternative techniques. The spatial resolution would be centimeters, and a complete mass spectrum could be achieved in one laser shot. An experiment is described that demonstrates these features. A 400 mj Nd:YAG laser is focused, to an intensity of 10(exp 11) w/sq cm, onto a Al, Ag, Cu, Ge, or lunar simulant target. A plasma forms from which ions are ejected. Some of these ions travel down an 18-m evacuated flight tube to a microchannel plate detector. Alternatively, the ions are captured by an ion trap where they are stored until pulsed into a 1-m time-of-flight mass spectrometer, giving the elemental composition of the remote surface. A television camera monitors the plasma plume shape, and a photodiode monitors the temporal plasma emission . With this system, ions of Al, Ag, Cu, Ge, and lunar simulant have been detected at 18 m. The mass spectrum from the ion trap and 1-m time-of-flight tube will be presented.

Deyoung, R. J.↗

Penetration of foliar-applied Zn and its impact on apple plant nutrition status: in vivo evaluation by synchrotron-based X-ray fluorescence microscopy

The absorption of foliar fertilizer is a complex process and is poorly understood. The ability to visualize and quantify the pathway that elements take following their application to leaf surfaces is critical for understanding the science and for practical applications of foliar fertilizers. By the use of synchrotron-based X-ray fluorescence to analyze the in vivo localization of elements, our study aimed to investigate the penetration of foliar-applied Zn absorbed by apple leaves with different physiological surface properties, as well as the possible interactions between foliar Zn level and the mineral nutrient status of treated leaves. The results indicate that the absorption of foliar-applied Zn was largely dependent on plant leaf surface characteristics. High-resolution elemental maps revealed that the high binding capacity of the cell wall for Zn contributed to the observed limitation of Zn penetration across epidermal cells. Trichome density and stomatal aperture had opposite effects on Zn fertilizer penetration: a relatively high density of trichomes increased the hydrophobicity of leaves, whereas the presence of stomata facilitated foliar Zn penetration. Low levels of Zn promoted the accumulation of other mineral elements in treated leaves, and the complexation of Zn with phytic acid potentially occurred owing to exposure to high-Zn conditions. The present study provides direct visual evidence for the Zn penetration process across the leaf surface, which is important for the development of strategies for Zn biofortification in crop species.

59 BASIC BIOLOGICAL SCIENCES↗

Future Applications Using Return-Pulse Correlation from Imaging Laser Altimeters

The Laser Vegetation Imaging Sensor (LVIS) is an airborne, wide-swath, digitization-only laser altimeter capable of collecting full return waveforms (i.e. echoes) from laser footprints ranging in diameter from 1 to 80 m across up to a 1 km wide data swath. The return waveform can be used to enhance the accuracy of laser ranging and to provide information about the vertical structure of vegetation and topography within each laser footprint. Although extremely small laser footprints (< 1 0 cm diameter) generally return simple, impulse responses to their target surface, larger footprints typically exhibit complex returns representing the diverse vertical distributions of surfaces contained in each footprint. Only a handful of airborne and spaceborne laser altimeters record the return echo or return pulse that is reflected from the Earth's surface (i.e. NASA's LVIS, SLA, VCL, and GLAS laser altimeters). Waveforms are currently interpreted to extract a timing or ranging point or points to represent the mean ground elevation or the vertical height of vegetation. But, recent progress using pulse shape correlation techniques shows promise for a variety of science applications involving change detection of surface topography and vegetation as well as potential for improving data processing by correlating images or crossovers to solve systematic biases. We show example correlation images from LVIS and discuss instrument design implications and potential science applications.

Blair, J. Bryan↗

Surface Studies of High Voltage Lithium Rich Composition: Li1.2Mn0.525Ni0.175Co0.1O2

This article reports the evidence of surface film formation because of the breakdown of electrolyte upon high voltage cycling (4.9 V) of lithium rich cathode having a nominal composition of, Li1.2Mn0.525Ni0.175Co0.1O2. We studied the chemical composition of this passivation film using electrochemical impedance, X-ray Photoelectron and micro-Raman spectroscopy and the results were compared against the pristine electrode. In order to distinguish the changes in the surface films composition induced by prolonged electrochemical cycling versus chemical passivation effect, we also studied the surface composition of cathode powders aged with electrolytes at 60 oC. Our study shows that electrodes cycled beyond 150 cycles showed a rapid drop in capacity due to increase in the surface film resistance resulting in limited capacity utilization.

36 MATERIALS SCIENCE↗

Effect of surface segregation on the oxidation resistance of Cu 3 Pt ( 100 )

Alloying element segregation often occurs under a reactive environment but its interplay with the subsequent surface oxidation of the alloy remains unclear. Using synchrotron-based ambient-pressure x-ray photoelectron spectroscopy, we dynamically monitor the surface segregation in Cu 3 Pt(100) in response to temperature and oxygen gas. Vacuum annealing leads to surface segregation of Cu along with the enrichment of Pt in the subsurface region. Upon switching to the O 2 atmosphere, dissociative chemisorption of oxygen does not change the surface segregation profile from that under the vacuum annealing condition. A stepwise increase in the oxygen pressure results in the transformation pathway of Cu → Cu 2 O → CuO, in which the selective oxidation of Cu gives rise to further accumulation of Pt underneath the oxide/alloy interface that hinders the supply of Cu from the bulk to the oxide/alloy interface, thereby leading to the termination of the surface oxidation after the Cu 2 O → CuO conversion is completed. This differs from the transformation pathway of Cu → Cu 2 O → Cu 2 O/CuO for the oxidation of pure Cu and Cu-Au alloys, in which the oxidation of Cu continues and the Cu 2 O/CuO bilayer growth is constantly maintained. Furthermore, these key differences provide useful insight into alloy design for controlling the surface properties such as corrosion resistance and catalytic performance of Cu base alloys.

36 MATERIALS SCIENCE↗

Gravity Wave Observations by the Mars Science Laboratory REMS Pressure Sensor and Comparison with Mesoscale Atmospheric Modeling with MarsWRF

Surface pressure measurements on Mars have revealed a wide variety of atmospheric phenomena. The Mars Science Laboratory Rover Environmental Monitoring Station pressure sensor dataset is now the longest duration record of surface pressure on Mars. We use the first 2580 martian sols, nearly 4 Mars years,of measurements to identify atmospheric pressure waves with periods of tens of minutes to hours using wavelet analysis on residual pressure after the tidal harmonics are removed. We find these waves have a clear diurnal cycle with strongest activity in the early morning and late evening and a seasonal cycle with the strongest waves in the second half of the martian year (Ls= 180-360°). The strongest such waves of the entire mission occurred during the Mars Year 34 global dust storm. Comparable atmospheric waves are identified using atmospheric modeling with the MarsWRF general circulation model in a “nested” high spatial resolution mode. With the support of the modeling, we find these waves best fit the expected properties of inertia-gravity waves with horizontal wavelengths of O(100s) of km. PLAIN LANGUAGE SUMMARY Measuring air pressure from the surface of Mars has revealed a wide variety of atmospheric phenomena. The Curiosity rover's record or surface air pressure is now the longest yet made on Mars.We use the first ~8 years of Curiosity's pressure observations to look for atmospheric waves with periods of tens of minutes to hours. We find these waves have a clear pattern in their daily behavior with the strongest activity in the early morning and late evening and a seasonal cycle with the strongest waves in the second half of the martian year (Northern hemisphere fall and winter). The strongest such waves occurred in 2018 during a global dust storm. We find comparable waves in atmospheric modeling. With the support of modeling, we find these waves best fit the expected properties of buoyancy waves forced by airflow over topography with horizontal wavelengths of 100-1000 km.

Scott D Guzewich↗

Nitridation of atomically smooth (111) diamond surfaces using a low temperature Penning plasma discharge

Diamond is a material with a wide band gap that can host a variety of isolated paramagnetic defects, called “color centers”1. These color centers have attractive optical and magnetic properties suitable for quantum applications including quantum computing, nanophotonics and quantum sensing. The most common one is the negatively charged nitrogen vacancy (NV) color center. For quantum sensing, it is desirable to reduce the distance between the NV center and the analyte by using shallow color centers in order to increase sensitivity. In this context, the diamond surface termination is especially critical. The appropriate surface termination is required to stabilize the color centers and mitigate surface magnetic noise. The nitrogen termination of diamond has been postulated as highly desirable for the NV color center. The goal of this project is to take advantage of an electron beam-generated ExB low temperature plasma developed by the Princeton Collaborative Low Temperature Plasma Research Facility (PCRF) at the Princeton Plasma Physics Laboratory (PPPL) to nitridate the surface of (100) diamond single crystals with minimal surface damage. In this reactor, the use of a magnetized plasma enables gentle processing of materials sensitive to ion damage. This is in strong contrast to radiofrequency plasma processing reactors which are known to etch and sputter the surface. XPS measurements indicate the incorporation of nitrogen and oxygen atoms at the surface in similar amounts. XAS measurements confirm the nitridation and indicate that the nitrogen termination is different from the nitrogen termination obtained using radiofrequency plasma treatment4. The combination of these results indicates the formation of amid species at the (100) diamond surface that are promising for the stabilization of NV centers for quantum sensing.

36 MATERIALS SCIENCE↗

Influence of Adsorption Site and Wavelength on the Photodesorption of NO from the (Fe,Cr) 3 O 4 (111) Mixed Oxide Surface

The photochemical properties of nitric oxide on a mixed oxide single crystal surface was examined in ultrahigh vacuum (UHV) using temperature programmed desorption (TPD), photon stimulated desorption (PSD) and low energy electron diffraction (LEED). The mixed oxide was a 75% Fe and 25% Cr corundum (0001) oxide film prepared on an α-Al2O3(0001) crystal, however its surface became terminated with a magnetite-like (111) structure after sputter/anneal cleaning, leading to a surface designated of (Fe,Cr)3O4(111). TPD of NO from the (Fe,Cr)3O4(111) surface revealed three chemisorbed states at 220, ~315 and 370 K assigned to NO binding at Fe3+, Cr3+ and Fe2+ sites, respectively. No significant thermal chemistry of NO was detected. NO photodesorption, the primary photochemical pathway in UHV, was sensitive to the adsorption site, with rates at the three adsorption sites following the trend: Fe3+ > Fe2+ > Cr3+. Multiexponential rate behavior seen in the overall NO PSD spectra was linked directly to site heterogeneity being manifested as a convolution of the individual NO photodesorption rates at the three types of surface sites. The photodesorption rate with UV light (365 nm) was ~10 times greater than that in the visible, but the per-photon rates across the visible spectrum (from 460 to 630 nm) were independent of the wavelength, which is suggestive of localized photon absorption at the adsorption site. Results in this study demonstrate that the adsorption site plays a critical role in determining photochemical rates on complex oxide surfaces. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multi-program national laboratory operated for DOE by Battelle. The research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.

36 MATERIALS SCIENCE↗