Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface termination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Room temperature atomic layerlike deposition of ZnS on organic thin films: Role of substrate functional groups and precursors

The room temperature atomic layerlike deposition (ALLD) of ZnS on functionalized self-assembled monolayers (SAMs) was investigated, using diethyl zinc (DEZ) and in situ generated H{sub 2}S as reactants. Depositions on SAMs with three different terminal groups, –CH{sub 3,} –OH, and –COOH, were studied. It was found that the reaction of DEZ with the SAM terminal group is critical in determining the film growth rate. Little or no deposition is observed on –CH{sub 3} terminated SAMs because DEZ does not react with the methyl terminal group. ZnS does deposit on both –OH and –COOH terminated SAMs, but the grow rate on –COOH terminated SAMs is ∼10% lower per cycle than on –OH terminated SAMs. DEZ reacts with the hydroxyl group on –OH terminated SAMs, while on –COOH terminated SAMs it reacts with both the hydroxyl and carbonyl bonds of the terminal groups. The carbonyl reaction is found to lead to the formation of ketones rather than deposition of ZnS, lowering the growth rate on –COOH terminated SAMs. SIMS spectra show that both –OH and –COOH terminated SAMs are covered by the deposited ZnS layer after five ALLD cycles. In contrast to ZnO ALLD where the composition of the film differs for the first few layers on –COOH and –OH terminated SAMs, the deposited film composition is the same for both –COOH and –OH terminated SAMs. The deposited film is found to be Zn-rich, suggesting that the reaction of H{sub 2}S with the Zn-surface adduct may be incomplete.

36 MATERIALS SCIENCE↗

Time-Resolved Imaging of Material Response Following Laser-Induced Breakdown in the Bulk and Surface of Fused Silica

Optical components within high energy laser systems are susceptible to laser-induced material modification when the breakdown threshold is exceeded or damage is initiated by pre-existing impurities or defects. These modifications are the result of exposure to extreme conditions involving the generation of high temperatures and pressures and occur on a volumetric scale of the order of a few cubic microns. The response of the material following localized energy deposition, including the timeline of events and the individual processes involved during this timeline, is still largely unknown. In this work, we investigate the events taking place during the entire timeline in both bulk and surface damage in fused silica using a set of time-resolved microscopy systems. These microscope systems offer up to 1 micron spatial resolution when imaging static or dynamic effects, allowing for imaging of the entire process with adequate temporal and spatial resolution. These systems incorporate various pump-probe geometries designed to optimize the sensitivity for detecting individual aspects of the process such as the propagation of shock waves, near-surface material motion, the speed of ejecta, and material transformations. The experimental results indicate that the material response can be separated into distinct phases, some terminating within a few tens of nanoseconds but some extending up to about 100 microseconds. Overall the results demonstrate that the final characteristics of the modified region depend on the material response to the energy deposition and not on the laser parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crump Geyser Exploration and Drilling Project. High Precision Geophysics and Detailed Structural Exploration and Slim Well Drilling

The Crump Geyser Exploration and Drilling Project – High Precision Geophysics and Detailed Structural Exploration and Slim Well Drilling ran from January 29, 2010 to September 30, 2013. During Phase 1 of the project, collection of all geophysical surveys was completed as outlined in the Statement of Project Objectives. In addition, a 5000-foot full sized exploration well was drilled by Ormat, and preexisting drilling data was discovered for multiple temperature gradient wells within the project area. Three dimensional modeling and interpretation of results from the geophysical surveys and drilling data gave confidence to move to the project into Phase 2 drilling. Geological and geophysical survey interpretations combined with existing downhole temperature data provided an ideal target for the first slim-hole drilled as the first task in Phase 2. Slim-hole 35-34 was drilled in September 2011 and tested temperature, lithology, and permeability along the primary range-bounding fault zone near its intersection with buried northwest-trending faults that have been identified using geophysical methods. Following analysis of the results of the first slim-hole 35-34, the second slim hole was not drilled and subsequent project tasks, including flowing differential self-potential (FDSP) surveys that were designed to detail the affect of production and injection on water flow in the shallow aquifer, were not completed. NGP sold the Crump project to Ormat in August 2014, afterwards, there was insufficient time and interest from Ormat available to complete the project objectives. NGP was unable to continue managing the award for a project they did not own due to liability issues and Novation of the award was not a viable option due to federal award timelines. NGP submitted a request to mutually terminate the award on February 18, 2015. The results of all of the technical surveys and drilling are included in this report. Fault interpretations from surface geology, aeromag, seismic, and gravity data sets are in good agreement, illustrating two or more major range-bounding faults and buried northwest trending faults. The intersections of these fault systems provide the primary targets for drilling.

15 GEOTHERMAL ENERGY↗

Cosmogenic 21 Ne exposure ages on late Pleistocene moraines in Lassen Volcanic National Park, California, USA

We report new cosmogenic 21 Ne in quartz exposure ages from 18 samples on three distinct moraines deposited in the Lost Creek drainage, approximately 3–7 km down-valley from Lassen Peak in Lassen Volcanic National Park. Although measuring 21 Ne in quartz is generally straightforward, accurate 21Ne exposure dating of deposits of late Pleistocene is rarely possible due to the significant quantities of non-cosmogenic 21 Ne present in most lithologies. Young quartz-bearing volcanic rocks have been observed to be an exception. We take advantage of moraine boulders sourced from the ~28 ka dacite of Lassen Peak to generate a chronology of alpine deglaciation in Lassen Volcanic National Park. Ages from three distinct moraines are in stratigraphic order at 22.1 ± 3.8, 20.2 ± 2.4, and 15.3 ± 3.8 ka and generally agree with other terminal and some recessional moraine ages across the Cascade Range and Sierra Nevada of the western United States. To date, these are among the youngest surfaces ever dated using cosmogenic 21 Ne and provide a cost-effective proof-of-concept approach to dating moraines where applicable.

58 GEOSCIENCES↗

The process of crater removal in the lunar maria, part P

Near-terminator photography from the Apollo 14 and 15 missions is used as a basis to evaluate the processes by which craters disappear from the lunar surface. From observations and analyses it is concluded that: (1) The erosion of lunar craters in the size range of 10 m to 1 km is effected principally by small impacts producing minute changes in crater form up to the point where the crater is worn to an interior slope of approximately 1 degree. Below that slope, the annihilation process is dominated by the formation of younger overlapping craters. (2) The distribution of shapes of craters in this size range can be explained as resulting from impact generated processes.

Soderblom, L. A.↗

Determination of work functions near melting points of refractory metals by using a direct-current arc

Effective work functions of refractory metals at temperatures near their melting points were determined by using a direct-current arc. A metal wire connected as the cathode was melted by striking an arc discharge in an argon atmosphere. A melted sphere was formed with a definite emitting area which was calculated from the sphere diameter measured after terminating the arc. Effective work functions were calculated from the Richardson-Dushman equation by using this emission area. The procedure is experimentally advantageous because surface cleanliness of the specimen is not critical, high vacuum is not required, and the anode-cathode spacing is not critical.

Gordon, W. A.↗

Pulsed electromagnetic gas acceleration

Detailed measurements of the axial velocity profile and electromagnetic structure of a high power, quasi-steady MPD discharge are used to formulate a gasdynamic model of the acceleration process. Conceptually dividing the accelerated plasma into an inner flow and an outer flow, it is found that more than two-thirds of the total power in the plasma is deposited in the inner flow, accelerating it to an exhaust velocity of 12.5 km/sec. The outer flow, which is accelerated to a velocity of only 6.2 km/sec, appears to provide a current conduction path between the inner flow and the anode. Related cathode studies have shown that the critical current for the onset of terminal voltage fluctuations, which was recently shown to be a function of the cathode area, appears to reach an asymptote for cathodes of very large surface area. Detailed floating potential measurements show that the fluctuations are confined to the vicinity of the cathode and hence reflect a cathode emission process rather than a fundamental limit on MPD performance.

Jahn, R. G.↗

Description of a FORTRAN subroutine for plotting three-dimensional data

A FORTRAN subroutine is described which provides the capability to plot three-dimensional data on an interactive cathode-ray-tube computer terminal or conventional plotter. The plotted data, which must be described in terms of a series of two-dimensional curves, appeared to form a surface in three-dimensional space. Features are included of the subroutine's capability for hidden-line computations. User instructions and sample programs are described.

James, M. R.↗

Correlation of LANDSAT lineaments with Devonian gas fields in Lawrence County, Ohio

In an effort to locate sources of natural gas in Ohio, the fractures and lineaments in Black Devonian shale were measured by: (1) field mapping of joints, swarms, and fractures; (2) stereophotointerpretation of geomorphic lineaments with precise photoquads; and (3) by interpreting the linear features on LANDSAT images. All results were compiled and graphically represented on 1:250,000 scale maps. The geologic setting of Lawrence County was defined and a field fracture map was generated and plotted as rose patterns at the exposure site. All maps were compared, contrasted, and correlated by superimposing each over the other as a transparency. The LANDSAT lineaments had significant correlation with the limits of oil and gas producing fields. These limits included termination of field production as well as extensions to other fields. The lineaments represent real rock fractures with zones of increased permeability in the near surface bedrock.

Johnson, G. O.↗

Winds From Luminous Late-Type Stars: The Effects of Nonlinear Alfven Waves - 1

We present the results of magnetohydrodynamic (MHD) modeling of winds from luminous late-type stars using a 2.5-dimensional, nonlinear MHD computer code. We assume that the wind is generated within an initially hydrostatic atmosphere and is driven by torsional Alfven waves generated at the stellar surface. Two cases of atmospheric topology are considered: case I has longitudinally uniform density distribution and isotropic radial magnetic field over the stellar surface, and case II has an isotropic, radial magnetic field with a transverse density gradient, which we refer to as an "atmospheric hole." We use the same set of boundary conditions for both models. The calculations are designed to model a cool luminous star, for which we assume an initial hydrostatic pressure scale height of 0.072 Stellar Radius, an Alfven wave speed of 92 km/s at the surface, and a wave period of 76 days, which roughly corresponds with the convective turnover time. For case I the calculations produce a wind with terminal velocity of about 22 km/s and a mass loss rate comparable to the expected value of 10(exp -6) Solar Mass/yr. For case II we predict a two-component wind: a fast (25 km/s) and relatively dense wind outside of the atmospheric hole and a slow (1.5 km/s), rarefied wind inside of the hole.

Airapetian, V. S.↗

Mars Ascent Vehicle Flight Test Mission Design, Analysis, and Instrumentation

The Mars Ascent Vehicle (MAV) will be the first rocket ever to launch off the surface of Mars, inserting Martian regolith samples into orbit. Since the MAV vehicle is a two-stage all-solid rocket with no thrust termination system, orbit in-sertion accuracy is heavily dependent on pre-flight predictions of the motor per-formance and dynamics of the spin-stabilized upper stage (MAV2). Therefore, a flight test of the MAV2 as the final stage on a Black Brant IX sounding rocket from Wallops Flight Facility (WFF) is planned. This paper discusses the mission design, post flight reconstruction approach, and instrumentation package pro-posed to meet the relevant flight test objectives.

MAV↗

Mars Ascent Vehicle Flight Test Mission Design, Analysis, and Instrumentation

The Mars Ascent Vehicle (MAV) will be the first rocket ever to launch off the surface of Mars, inserting Martian regolith samples into orbit. Since the MAV vehicle is a two-stage all-solid rocket with no thrust termination system, orbit in-sertion accuracy is heavily dependent on pre-flight predictions of the motor per-formance and dynamics of the spin-stabilized upper stage (MAV2). Therefore, a flight test of the MAV2 as the final stage on a Black Brant IX sounding rocket from Wallops Flight Facility (WFF) is planned. This paper discusses the mission design, post flight reconstruction approach, and instrumentation package pro-posed to meet the relevant flight test objectives.

MAV↗

System overview on electromagnetic compensation for reflector antenna surface distortion

The system requirements and hardware implementation for electromagnetic compensation of antenna performance degradations due to thermal effects was investigated. Future commercial space communication antenna systems will utilize the 20/30 GHz frequency spectrum and support very narrow multiple beams (0.3 deg) over wide angle field of view (15-20 beamwidth). On the ground, portable and inexpensive very small aperture terminals (VSAT) for transmitting and receiving video, facsimile and data will be employed. These types of communication system puts a very stringent requirement on spacecraft antenna beam pointing stability (less than .01 deg), high gain (greater than 50 dB) and very lowside lobes (less than -25 dB). Thermal analysis performed on the advanced communication technology satellite (ACTS) has shown that the reflector surfaces, the mechanical supporting structures and metallic surfaces on the spacecraft body will distort due thermal effects from a varying solar flux. The antenna performance characteristics (e.g., pointing stability, gain, side lobe, etc.) will degrade due to thermal distortion in the reflector surface and supporting structures. Specifically, antenna RF radiation analysis has shown that pointing error is the most sensitive antenna performance parameter to thermal distortions. Other antenna parameters like peak gain, cross polarization level (beam isolation), and side lobe level will also degrade with thermal distortions. In order to restore pointing stability and in general antenna performance several compensation methods were proposed. In general these compensation methods can be classified as being either of mechanical or electromagnetic type. This paper will address only the later one. In this approach an adaptive phased array antenna feed is used to compensate for the antenna performance degradation. Extensive work has been devoted to demonstrate the feasibility of adaptive feed compensation on space communication antenna systems. This paper addresses the system requirements for such a system and identify candidate technologies (analog and digital) for possible hardware implementation.

Acosta, R. J.↗

Aeroacoustics of supersonic jet flows from contoured and solid/porous conical plug-nozzles

The results of an experimental study of the acoustic far-field, the shock associated noise, and the nature of the repetitive shock structure of supersonic jet flows issuing from plug-nozzles having externally-expanded plugs with pointed termination operated at a range of supercritical pressure ratios Xi approaching 2 to 4.5 are reported. The plug of one of these plug-nozzles was contoured. The other plug-nozzles had short conical plugs with either a solid surface or a combination of solid/porous surface of different porosities. The contoured and the uncontoured plug-nozzles had the same throat area and the same annulus-radius ratio K = R sub p/R sub N = 0.43. As the result of modifications of the shock structure, the acoustic performance of improperly expanded jet flows of an externally-expanded short uncontoured plug of an appropriate geometry with suitably perforated plug and a pointed termination, is shown to approach the acoustic performance of a shock-free supersonic jet issuing from an equivalent externally-expanded contoured plug-nozzle.

Dosanjh, Darshan S.↗

Navigation and performance analysis of a Mars surface sample return /MSSR/ mission

A Viking-derived MSSR mission involves a rendezvous in Mars orbit between the sample-carrying Mars Ascent Vehicle (MAV) and a modified Viking Orbiter spacecraft. Conditions for the automatic terminal rendezvous phase are established by an initial earth-controlled phase which uses very accurate relative state information obtained by multi-vehicle interferometric tracking data. A navigation analysis has demonstrated sufficient performance and control capability to satisfy those conditions prior to terminal rendezvous. Specific performance constraints for the mission are developed, leading to a sizing of vehicle weight requirements and trades applicable to a 1981 MSSR, launched by a single Titan IIIE/Centaur.

Satin, A. L.↗

An Investigation of Terminal Guidance and Control Techniques for a Robotic Mars Lander

Continuing on previous work, various precision landing control algorithms arc examined with the goal of minimizing the landed distance to a specified location on the Mars surface. This study considers a set of points from parachute handoff to touchdown on the surface. The first scenario considers a reverse gravity turn to a hover condition 500 meters above the surface and then uses lateral thrusting to minimize die range to target. The second scenario examines a guided, lifting parachute followed by a powered gravity turn to the targeted landing site. The third scenario considers thrust vectoring while on the ballistic parachute, followed by a reverse gravity turn to touchdown.

Birge, Brian K.↗

Dy adsorption on and intercalation under graphene on 6 H -SiC(0001) surface from first-principles calculations

Previous experimental observations motivate clarification of configuration stabilities and kinetic processes for intercalation of guest atoms into a layered van der Waals material such as a graphene-SiC system. From our first-principles density functional theory (DFT) calculations, we analyze Dy adsorption and intercalation for graphene on a 6H-SiC(0001) surface, where the system includes two single-atom-thick graphene layers: the top-layer graphene (TLG) and the underling buffer-layer graphene (BLG) above the terminal Si layer. Our chemical potential analysis shows that intercalation of a single Dy atom into the gallery between TLG and BLG is more favorable than adsorption on TLG but that intercalation into the gallery underneath BLG is highly unfavorable. We obtain diffusion barriers of ~0.45 and 0.54 eV for a Dy atom diffusing on and under TLG, respectively. We find that the direct penetration of a Dy atom from the graphene top into the gallery under TLG is almost inhibited below a temperature of ~1400 K due to a large global barrier of at least ~3.5 eV. Instead, we find that a single Dy atom on TLG can easily intercalate by crossing a TLG step (e.g., a zigzag step presaturated by a Dy chain or a reconstructed zigzag step zz57). Additionally, we also perform DFT calculations for different Dy coverages to demonstrate how the favorability of Dy intercalation, as well as the corresponding interlayer spacings, depend on the coverage. Consequently, we can provide general insight and guidance for extensively studied systems involving intercalation of foreign atoms into graphene on a SiC substrate.

36 MATERIALS SCIENCE↗

Analysis of the EM scattering from arbitrary open-ended waveguide cavities using axial Gaussian Beam tracking

The electromagnetic (EM) scattering from a planar termination located inside relatively arbitrarily shaped open-ended waveguide cavities with smoothly curved interior walls is analyzed using a Gaussian Beam (GB) expansion of the incident plane wave fields in the open end. The cavities under consideration may contain perfectly-conducting interior walls with or without a thin layer of material coating, or the walls may be characterized by an impedance boundary condition. In the present approach, the GB's are tracked only to the termination of the waveguide cavity via beam reflections from interior waveguide cavity walls. The Gaussian beams are tracked approximately only along their beam axes; this approximation which remains valid for relatively well focussed beams assumes that an incident GB gives rise to a reflected GB with parameters related to the incident beam and the radius of curvature of the wall. It is found that this approximation breaks down for GB's which come close to grazing a convex surface and when the width of the incident beam is comparable to the radius of curvature of the surface. The expansion of the fields at the open end depend on the incidence angle only through the expansion coefficients, so the GB's need to be tracked through the waveguide cavity only once for a wide range of incidence angles. At the termination, the sum of all the GB's are integrated using a result developed from a generalized reciprocity principle, to give the fields scattered from the interior of the cavity. The rim edge at the open end of the cavity is assumed to be sharp and the external scattering from the rim is added separately using Geometrical Theory of Diffraction. The results based on the present approach are compared with solutions based on the hybrid asymptotic modal method. The agreement is found to be very good for cavities made up of planar surfaces, and also for cavities with curved surfaces which are not too long with respect to their width.

Burkholder, R. J.↗