Search NASA⌕ Search

SEARCH · Search NASA

Results for “texturization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Redox History of Early Solar System Planetismals Recorded in the D;Orbigny Angrite

Angrites are ancient basaltic meteorites ({approx}4.56 Ga) that preserve evidence of some of the solar system's earliest melting events. The volcanic-textured angrites such as D'Orbigny were rapidly crystallized and are relatively pristine; lacking shock, brecciation, and parent-body weathering textures. Thus, these angrites provide a unique 'window' into the petrogenesis of planetary bodies in the early solar system. Angrites may be formed by partial melting of CV chondrites under relatively oxidized sources compared to the eucrites, and therefore may document variations in fO{sub 2} conditions on carbonaceous chondrite parent bodies. Thus, understanding the intrinsic fO{sub 2} conditions of the angrites is needed to determine how different early Solar System basalts form, to model separation of the core, mantle and crust, and to understand magnetic fields on planetary bodies. The D'Orbigny angrite contains a range of textures: (a) crystalline texture containing interlocking crystals of fassaite (pyroxene) with Ti-rich rims, anorthite, and Mg-olivine with Fe-rich rims; (b) cavities with protruding needle-like pyroxene and anorthite dusted by Ca-(Mg)-carbonate; (c) mesostasis with kirschsteinite, ilmenite, troilite, phosphates (e.g., merrilite, whitlockite and Casilicophosphate), rhonite and minor glass; (d) glasses ({approx} angrite composition) in vesicles, as inclusions and as beads, and also cross-cutting crystal-rich portions of the rock; (e) vesicles (e.g., {approx}1.4 vol. %, 0.0219-87.7 mm{sup 3}). Analysis of the textures and Fe{sup 3+}/Fetotal of the cavity pyroxene suggests that the oxygen fugacity (fO{sub 2}) increased in the D'Orbigny angrite perhaps due to introduction of a gas phase. Here we examine the detailed fO{sub 2} history using micro-analyses that allow us to avoid inclusions that may cause spurious results. We present analyses of both S- and V- oxidation states to complement other work using Fe-oxidation state and to avoid problems related to measuring low concentrations of Fe{sup 3+} and propagating errors when calculating fO{sub 2} in samples with low Fe{sup 3+} concentrations.

58 GEOSCIENCES↗

Deformation crossover : from nano to meso scales.

In situ synchrotron and neutron diffraction were used to study deformation mechanisms in Ni over a broad range of grain sizes. The experimental data show that unlike in coarse-grained metals, where the deformation is dominated by dislocation slip, plastic deformation in nanocrystalline Ni is mediated by grain-boundary activities, as evidenced by the lack of intergranular strain and texture development. For ultrafine-grained Ni, although dislocation slip is an active deformation mechanism, deformation twinning also plays an important role, whose propensity increases with the grain size.

43 PARTICLE ACCELERATORS↗

Effects of Cold Rolling on Microstructure and Mechanical Properties of Fe-30Mn-3Si-4Al-0.093C TWIP Steel

The effects of cold rolling on microstructure evolution and the associated mechanical properties of Fe-30Mn-3Si-4Al-0.093C twinning-induced plasticity (TWIP) steel are examined in this work with reduction rates of 10%, 20%, 30%, 40%, 50%, 60%, and 70%. Through texture analysis and transmission electron microscopy (TEM) observations, it is suggested that slip, mechanical twinning, the interaction between dislocation/twin boundaries (TB), and shear band have influenced the observed mechanical behavior and development of texture. Special components of weak initial textures are preferential for mechanical twinning, resulting in an increase in strain hardening rate. By mechanical twinning, the {111}<112> orientation is rotated into a position at the vicinity of the {110}<001> Goss orientation, and the {552}<115> (Cu-twin) texture is transformed to the {110}<001> orientation. The evolution of texture is closely related to the onset of shear banding resulting from deformation twinning. The sample with 10% cold reduction exhibits a favorable combination of yield strength and ductility, indicating a considerable capacity for energy absorption. With increasing rolling reductions, the deformation of the samples becomes inhomogeneous due to the high anisotropy of the microstructure. The localized shear bands resulting from the excessive cold rolling are detrimental to the ductility of the present TWIP steel.

Shen, Yongfeng↗

Coupled crystal orientation-size effects on the strength of nano crystals

We study the combined effects of grain size and texture on the strength of nanocrystalline copper (Cu) and nickel (Ni) using a crystal-plasticity based mechanics model. Within the model, slip occurs in discrete slip events exclusively by individual dislocations emitted statistically from the grain boundaries. We show that a Hall-Petch relationship emerges in both initially texture and non-textured materials and our values are in agreement with experimental measurements from numerous studies. We find that the Hall-Petch slope increases with texture strength, indicating that preferred orientations intensify the enhancements in strength that accompany grain size reductions. These findings reveal that texture is too influential to be neglected when analyzing and engineering grain size effects for increasing nanomaterial strength.

36 MATERIALS SCIENCE↗

Controlled nanostructuration of polycrystalline tungsten thin films

Nanostructured tungsten thin films have been obtained by ion beam sputtering technique stopping periodically the growing. The total thickness was maintained constant while nanostructure control was obtained using different stopping periods in order to induce film stratification. The effect of tungsten sublayers' thicknesses on film composition, residual stresses, and crystalline texture evolution has been established. Our study reveals that tungsten crystallizes in both stable {alpha}- and metastable {beta}-phases and that volume proportions evolve with deposited sublayers' thicknesses. {alpha}-W phase shows original fiber texture development with two major preferential crystallographic orientations, namely, {alpha}-W<110> and unexpectedly {alpha}-W<111> texture components. The partial pressure of oxygen and presence of carbon have been identified as critical parameters for the growth of metastable {beta}-W phase. Moreover, the texture development of {alpha}-W phase with two texture components is shown to be the result of a competition between crystallographic planes energy minimization and crystallographic orientation channeling effect maximization. Controlled grain size can be achieved for the {alpha}-W phase structure over 3 nm stratification step. Below, the {beta}-W phase structure becomes predominant.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing orientation information using 3-dimensional reciprocal space volume analysis

We present that the crystallographic texture of polycrystalline materials is the result of how these materials are processed and what external forces materials have experienced. Neutron and X-ray diffraction are standard methods to characterize global crystallographic textures. However, conventional neutron and X-ray texture analyses rely on pole figure inversion routines derived from intensity analysis of individual reflections or powder Rietveld analysis to reconstruct and model the orientation distribution from slices through reciprocal space. In this work, we describe an original approach to directly probe the crystallographic texture information of rolled aluminum from the intensity distribution in 3-dimensional reciprocal space volumes measured simultaneously. Using the TOPAZ time-of-flight Laue neutron diffractometer, reciprocal space analysis allowed determination of “pole spheres” with <1° angular resolution. Finally, these pole spheres are compared with reconstructed pole figures from classic texture analysis.

36 MATERIALS SCIENCE↗

Simulation-trained machine learning models for Lorentz transmission electron microscopy

Understanding the collective behavior of complex spin textures, such as lattices of magnetic skyrmions, is of fundamental importance for exploring and controlling the emergent ordering of these spin textures and inducing phase transitions. It is also critical to understand the skyrmion–skyrmion interactions for applications such as magnetic skyrmion-enabled reservoir or neuromorphic computing. Magnetic skyrmion lattices can be studied using in situ Lorentz transmission electron microscopy (LTEM), but quantitative and statistically robust analysis of the skyrmion lattices from LTEM images can be difficult. In this work, we show that a convolutional neural network, trained on simulated data, can be applied to perform segmentation of spin textures and to extract quantitative data, such as spin texture size and location, from experimental LTEM images, which cannot be obtained manually. This includes quantitative information about skyrmion size, position, and shape, which can, in turn, be used to calculate skyrmion–skyrmion interactions and lattice ordering. We apply this approach to segmenting images of Néel skyrmion lattices so that we can accurately identify skyrmion size and deformation in both dense and sparse lattices. The model is trained using a large set of micromagnetic simulations as well as simulated LTEM images. This entirely open-source training pipeline can be applied to a wide variety of magnetic features and materials, enabling large-scale statistical studies of spin textures using LTEM.

McCray, Arthur R. C. (ORCID:0000000160774698)↗

General Approach to Solving Spin Moiré Superstructures

Recently, a host of exciting magnetic textures such as topologically protected skyrmion lattices has been discovered in several bulk metallic lanthanide compounds. In addition to hosting skyrmion phases, a hallmark of this class of materials is the appearance of numerous spin textures characterized by superposition of multiple magnetic modulations: spin moiré superlattices. In order to understand the multitude of complex phases often present in these materials, we require a general-purpose experimental and theoretical framework. Here, we demonstrate such an approach in EuAg4⁢Sb2 by comprehensively characterizing and modeling its three complex zero-field magnetic textures. Systematic symmetry-breaking experiments using uniaxial strain determine that the ground-state incommensurate magnetic phase (ICM1) is single 𝑞, meaning the magnetic moments modulate along one magnetic propagation vector. In contrast, ICM2 and ICM3 are both double 𝑞, meaning they are formed from the superposition of two sinusoidal spin modulations, i.e., spin moiré superlattices. Further, through application of polarized small-angle neutron scattering and spherical neutron polarimetry, we demonstrate that ICM1 is a single-𝑞 cycloid and ICM2 and ICM3 are double-𝑞 vortex lattices. Despite the quasi-two-dimensional nature of EuAg4⁢Sb2, the modulations propagate out of the ab plane, leading to a shift of the spin texture between triangular lattice planes. Further, the ICM3 to ICM2 transition includes an unusual 45° rotation of the magnetic vortex lattice. Motivated by the coexistence of such drastically different phases in this compound, we conclude by developing a phenomenological model that sheds light on the energetic origins of these varied phases. Our experimental probes and theoretical modeling definitively characterize three different and tunable phases in one material and provide insight for the design of topological spin-texture materials.

Neves, Paul [Massachusetts Institute of Technology↗

Meron, skyrmion, and vortex crystals in centrosymmetric tetragonal magnets

The recent experimental confirmation of a transformation between meron and skyrmion topological spin textures in the chiral magnet Co 8 Zn 9 Mn 3 confirms that the skyrmion crystals discovered in 2009 are just the tip of the iceberg. Crystals of topological textures, including skyrmions, merons, vortices, and monopoles, can be stabilized by combining simple physical ingredients, such as lattice symmetry, frustration, and spin anisotropy. The current challenge is to find the combinations of these ingredients that produce specific topological spin textures. In this work, we report a simple mechanism for the stabilization of meron, skyrmion, and vortex crystals in centrosymmetric tetragonal magnets. In particular, the meron/skyrmion crystals can form even in absence of magnetic field. The application of magnetic field leads to a rich variety of topological spin textures that survive in the long wavelength limit of the theory. When conduction electrons are coupled to the spins, these topological spin textures twist the electronic wave functions to induce Chern insulators and Weyl semimetals for specific band filling fractions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SU-D-12A-02: DeTECT, a Method to Enhance Soft Tissue Contrast From Mega Voltage CT

Purpose: MVCT images have been used on TomoTherapy system to align patients based on bony anatomies but its usefulness for soft tissue registration, delineation and adaptive radiation therapy is severely limited due to minimal photoelectric interaction and prominent presence of noise resulting from low detector quantum efficiency of megavoltage x-rays. We aim to utilize a non-local means denoising method and texture analysis to recover the soft tissue information for MVCT. Methods: A block matching 3D (BM3D) algorithm was adapted to reduce the noise while keeping the texture information of the MVCT images. BM3D is an imaging denoising algorithm developed from non-local means methods. BM3D additionally creates 3D groups by stacking 2D patches by the order of similarity. 3D denoising operation is then performed. The resultant 3D group is inversely transformed back to 2D images. In this study, BM3D was applied to MVCT images of a CT quality phantom, a head and neck and a prostate patient. Following denoising, imaging texture was enhanced to create the denoised and texture enhanced CT (DeTECT). Results: The original MVCT images show prevalent noise and poor soft tissue contrast. By applying BM3D denoising and texture enhancement, all MVCT images show remarkable improvements. For the phantom, the contrast to noise ratio for the low contrast plug was improved from 2.2 to 13.1 without compromising line pair conspicuity. For the head and neck patient, the lymph nodes and vein in the carotid space inconspicuous in the original MVCT image becomes highly visible in DeTECT. For the prostate patient, the boundary between the bladder and the prostate in the original MVCT is successfully recovered. Both results are visually validated by kVCT images of the corresponding patients. Conclusion: DeTECT showed the promise to drastically improve the soft tissue contrast of MVCT for image guided radiotherapy and adaptive radiotherapy.

60 APPLIED LIFE SCIENCES↗

SU-E-I-85: Exploring the 18F-Fluorodeoxyglucose PET Characteristics in Staging of Esophageal Squamous Cell Carcinoma

Purpose: The aim of this study was to explore the characteristics derived from 18F-fluorodeoxyglucose (18F-FDG) PET image and assess its capacity in staging of esophageal squamous cell carcinoma (ESCC). Methods: 26 patients with newly diagnosed ESCC who underwent 18F-FDG PET scan were included in this study. Different image-derived indices including the standardized uptake value (SUV), gross tumor length, texture features and shape feature were considered. Taken the histopathologic examination as the gold standard, the extracted capacities of indices in staging of ESCC were assessed by Kruskal-Wallis test and Mann-Whitney test. Specificity and sensitivity for each of the studied parameters were derived using receiver-operating characteristic curves. Results: 18F-FDG SUVmax and SUVmean showed statistically significant capability in AJCC and TNM stages. Texture features such as ENT and CORR were significant factors for N stages(p=0.040, p=0.029). Both FDG PET Longitudinal length and shape feature Eccentricity (EC) (p≤0.010) provided powerful stratification in the primary ESCC AJCC and TNM stages than SUV and texture features. Receiver-operating-characteristic curve analysis showed that tumor textural analysis can capability M stages with higher sensitivity than SUV measurement but lower in T and N stages. Conclusion: The 18F-FDG image-derived characteristics of SUV, textural features and shape feature allow for good stratification AJCC and TNM stage in ESCC patients.

60 APPLIED LIFE SCIENCES↗

SU-D-BRA-07: A Phantom Study to Assess the Variability in Radiomics Features Extracted From Cone-Beam CT Images

Purpose: Several studies have demonstrated the prognostic potential for texture features extracted from CT images of non-small cell lung cancer (NSCLC) patients. The purpose of this study was to determine if these features could be extracted with high reproducibility from cone-beam CT (CBCT) images in order for features to be easily tracked throughout a patient’s treatment. Methods: Two materials in a radiomics phantom, designed to approximate NSCLC tumor texture, were used to assess the reproducibility of 26 features. This phantom was imaged on 9 CBCT scanners, including Elekta and Varian machines. Thoracic and head imaging protocols were acquired on each machine. CBCT images from 27 NSCLC patients imaged using the thoracic protocol on Varian machines were obtained for comparison. The variance for each texture measured from these patients was compared to the variance in phantom values for different manufacturer/protocol subsets. Levene’s test was used to identify features which had a significantly smaller variance in the phantom scans versus the patient data. Results: Approximately half of the features (13/26 for material1 and 15/26 for material2) had a significantly smaller variance (p<0.05) between Varian thoracic scans of the phantom compared to patient scans. Many of these same features remained significant for the head scans on Varian (12/26 and 8/26). However, when thoracic scans from Elekta and Varian were combined, only a few features were still significant (4/26 and 5/26). Three features (skewness, coarsely filtered mean and standard deviation) were significant in almost all manufacturer/protocol subsets. Conclusion: Texture features extracted from CBCT images of a radiomics phantom are reproducible and show significantly less variation than the same features measured from patient images when images from the same manufacturer or with similar parameters are used. Reproducibility between CBCT scanners may be high enough to allow the extraction of meaningful texture values for patients. This project was funded in part by the Cancer Prevention Research Institute of Texas (CPRIT). Xenia Fave is a recipient of the American Association of Physicists in Medicine Graduate Fellowship.

60 APPLIED LIFE SCIENCES↗

Quantum skyrmionics

Skyrmions are topological solitons that emerge in many physical contexts. In magnetism, they appear as textures of the spin-density field stabilized by different competing interactions and characterized by a topological charge that counts the number of times the order parameter wraps the sphere. They behave as classical objects when the spin texture varies slowly on the scale of the microscopic lattice of the magnet. However, the fast development of experimental tools to create and stabilize skyrmions in thin magnetic films has led to a rich variety of textures, sometimes of atomistic sizes. In this paper, we discuss, in a pedagogical manner, how to introduce quantum interference in the translational dynamics of skyrmion textures, starting from the micromagnetic equations of motion for a classical soliton. We study how the nontrivial topology of the spin texture manifests in the semiclassical regime, when the microscopic lattice potential is treated quantum-mechanically, but the external driving forces are taken as smooth classical perturbations. We highlight close relations to the fields of noncommutative quantum mechanics, Chern–Simons theories, and the quantum Hall effect.

Physics↗

Generation and Characterization of Anisotropic Microstructures in Rare Earth-Iron-Boron Alloys

The goal of this work is to investigate methods in which anisotropy could be induced in fine-grained alloys. We have identified two general processing routes to creating a fine, textured microstructure: form an amorphous precursor and devitrify in a manner that induces texture or form the fine, textured microstructure upon cooling directly from the liquid state. Since it is possible to form significant amounts of amorphous material in RE-Fe-B alloys, texture could be induced through biasing the orientationof the crystallites upon crystallization of the amorphous material. One method of creating this bias is to form glassy material and apply uniaxial pressure during crystallization. Experiments on this are presented. All of the work presented here utilizes melt-spinning, either to create precursor material, or to achieve a desired final microstructure. To obtain greater control of the system to process these materials, a study was done on the effects of heating the wheel and modifying the wheel’s surface finish on glass formation and phase selection. The second general approach—creating the desired microstructure directly from the liquid—can be done through directional rapid solidification. In particular, alloys melt-spun at low tangential wheel speeds often display directional columnar growth through a portion of the ribbon. By refining and stabilizing the columnar growth, a highly textured fine microstructure is achieved. The effects of adding a segregating element (Ag) on the columnar growth are characterized and presented.

36 MATERIALS SCIENCE↗

Complete Status Report Documenting the Development of Friction Stir Welding for Producing a Butt Joint in Thin Wall Tubing of ODS Alloys

A challenging attempt using friction stir welding to produce a butt joint between two 1.0 mm thick plates of 14YWT was nearly successful. The modified tool pin mostly penetrated the thickness of the adjoined thin plate samples resulting in a small blunt notch on the bottom surface of the butt joint. A bend occurred in the thin plate sample due to formation of stresses from clamping the thin plate sample during FSW. The peak displacement of the bend occurred along the center line of the butt joint. The weld zone showed good microstructure mixing with some flashing mostly on the retreating side that suggested excess heat input by friction between the traveling and spinning tool pin and thin plates of 14YWT. Neutron diffraction experiments were performed on the bent sample of 14YWT to measure the residual stresses in the butt joint on the HB-2B beam line at the Neutron Residual Stress Facility at HFIR. However, the neutron scattering to background noise ratio was very low during data acquisition. Measurements of lattice strains were obtained in the rolling (RD) and normal (ND) directions but not in the extrusion direction (ED) of the thin plate sample. Unfortunately, the quality of the data was not sufficient for determining the residual stresses in the butt joint. From the previous neutron scattering experiments conducted on four hot rolled plates (R1, R2, R3 and R4) of 14YWT, the residual stresses were calculated from lattice strain data and plotted in 2-D color contour maps for ED, RD and ND. The results showed variations in the magnitude and spatial position of residual stresses in the microstructure of the four plates. The magnitude in residual stresses in ED and RD increased gradually with increasing rolling deformation for R1 (50%) to R2 (76%), followed by larger increases in R3 (89%) and R4 (95%). The maximum peaks in residual stresses for R4 was ~710-730 MPa in ED and RD. The residual stresses in ND were below ~300 MPa for each of the 4 rolled plates, with a maximum residual stress in R4 (95%) of ~400 MPa. These results indicated that significant residual stresses representing ~57% of the yield stress of 14YWT (SM13) had accumulated in the 14YWT plate after hot rolling to the 1 mm thickness, which was used in the FSW experiments. The microstructure analysis of the 1.0 mm thick plate of 14YWT containing the butt joint produced by FSW revealed significant changes in the grain structure and texture between the unaffected zone (UZ) of the rolled plate and the butt joint weld. In the UZ, the grains were severely elongated after 95% deformation and mainly possessed the {101} texture component in the ED. Two predominant grain misorientation angles were observed: one consisting of small misorientations of <5º between highly elongated grains and the other consisting of large misorientations of >15º in pockets of small grains that might have formed by dynamic recrystallization processes during rolling of the plate at 1000ºC. The morphology and texture of grains in the heat affected zone (HAZ) were similar to those in UZ, except the grains had coarsened due to excess heat input during FSZ. A population of pores formed and the grains both coarsened and changed to isotropic morphology in the microstructure of the butt joint on both the advancing and retreating sides. The texture of grains in both regions were randomly orientated between the 3 poles {001}, {101} and {111}. The main difference in texture of grains between the advancing side and retreating side was with the misorientation angles of neighboring grains. Most of the grains in the advancing side had misorientation angles of >5º indicating that these grains experienced recrystallization. On the retreating side, areas containing larger grains showed high misorientation angles of >15º compared to areas appearing as bands of grains with misorientation angles of <5º and between 5º-15º. Numerous small pockets of grains with low misorientation angles of <5º were distributed in the microstructure among the grains showing high misorientation angles of >15º. It was determined that the grains associated with low misorientation angles contained sub-grain structures, which was consistent with both recrystallization and recovery mechanisms for grains located on the retreating side of the butt joint. These results demonstrate the complex microstructure that evolves in the microstructure of 14YWT resulting from the input of high temperatures and severe deformations during FSW.

36 MATERIALS SCIENCE↗

High Efficiency, Inexpensive Thin Film III-V Photovoltaics using Single-Crystalline-Like, Flexible Substrates

An innovative, non-mainstream approach has been developed to fabricate inexpensive GaAs solar cells directly on epi-ready flexible metal substrates. Using templates made by ion beam assisted deposition (IBAD) and epitaxial germanium films made by Plasma Enhanced Chemical Vapor Deposition (PECVD), epitaxial GaAs films with high opto-electronic and structural quality have been grown on metal substrates using metal organic chemical vapor deposition (MOCVD). Crystallographic out-of-plane and in-plane texture spread less than 1 degree full-width-at-half-maximum (FWHM) was achieved in undoped, n-type and p-type GaAs films as well as in AlGaAs films on metal substrates. Electron mobility of >1300 cm 2 /V-s was attained in GaAs:Si n-type films. Also, hole mobility of >100 cm 2 /V-s was measured in GaAs:Zn films. Consistent doping was obtained in GaAs:Si (10 15 -10 18 cm -3 ), and GaAs:Zn films (10 17 -10 19 cm -3 ), necessary for the active device layers of a GaAs solar cell. Defect reduction techniques (thermal cycling, superlattice structures) were implemented to reduce defect density in GaAs films from 1 × 10 9 cm -2 to 9 × 10 7 cm -2 . Lifetime of 2.3 ns was obtained in AlGaAs/GaAs double-heterostructure device. Solar cells were fabricated based on designs using 1-dimensional and 2-dimensional simulations tailored to the specific properties of the GaAs films on metal substrates. All device fabrication processes (lithography, anti-reflection coating (ARC), device isolation and mesa formation and ohmic metal electrode formation) suitable for III-V solar cell fabrication on metal substrates were fully developed. A bi-layered ARC using ZnS and MgF 2 was used to minimize the reflection over wide range of spectrum. When this ARC was applied after removal of the parasitic absorption layer, the conversion efficiencies were improved up to 11.1% with V oc = ~0.621 V, J sc = ~24.5 mA/cm 2 , and FF = ~0.735. Yet another accomplishment in this project was the development of all electrically-conducting architecture for GaAs solar cells on metal substrates. Biaxial-texture was successfully achieved in all electrically-conducting buffer layer on metal substrate in structure based on IBAD TiN instead of IBAD MgO. The all electrically-conducting Ge/NiSi 2 /TiN/IBAD-TiN/Hastelloy substrate was used to fabricate back contacts for vertically conducting solar cell structures on metal substrates. A metallic resistivity as low as 4.17 μΩ•cm was obtained. A significant improvement of the texture of the Ge template was achieved using a Ag buffer layer between the TiN films. Epitaxial GaAs was successfully grown on the all-electrically-conducting buffer architecture. A Liquid Phase Epitaxy (LPE) method to drastically increase grain size of epitaxial Ge while maintaining the single-crystalline-like texture. Grain size up to 35 µm was achieved in LPE Ge grown on sputtered Ge with a grain size of ~ 1 µm on IBAD template on metal substrate. Epitaxial GaAs was grown on LPE Ge, with an out-of-plane texture of 0.34° compared to 0.98° in GaAs grown on sputter deposited Ge. A model was developed to simulate the effect of grain boundaries as a function of grain size of GaAs films on metal substrates. This model showed that even the very low angle grain boundaries (<1º misorientation) of our GaAs films led to decrease in Voc. Hydrogen plasma passivation treatment is being developed to improve open circuit voltage and the conversion efficiency of GaAs solar cells on flexible substrate.

14 SOLAR ENERGY↗

Petrography and classification of Apollo 17 non-mare rocks with emphasis on samples from the Station 6 boulder

The Apollo-17 nonmare rock collection consists largely of polymict breccias lithified by impact and characterized by a variety of types of lithic clasts, concentrations of siderophile elements that indicate substantial meteoritic contamination, and contents of metallic iron well above those of mare basalts. These materials may be subdivided into two compositional groups, one with 70-80% feldspar and the other with 50-60% feldspar. The high-feldspar group includes two characteristic textures: coarsely poikilitic and granulitic. The low-feldspar group includes (1) fragmental breccias with the most diverse lithic clast populations of all breccias and (2) crystalline breccias with poikilitic and subophitic to micropoikilitic textures containing tabular feldspar, granular textures with anhedral feldspar, and clast-rich ophitic textures containing less euhedral feldspar. In the poikilitic and subophitic to micropoikilitic textures, the clast population is dominated by the high-feldspar lithologies and An(94-47) plagioclase grains, indicating that these more refractory lithologies were abundant in the material from which the less feldspathic crystalline rocks formed.

Simonds, C. H.↗

Fine-grained millimeter-sized objects in type 3 ordinary chondrites and their relation to chondrules and matrix

Fine-grained, opaque, silicate-rich matrix material, occurring as rims on chondrules and clasts, discrete clasts, and between chondrule and mineral fragments is a primitive component of chondrites and may resemble the material from which chondrules formed. To elucidate the relationship between chondrules and matrix and to help identify chondrule precursor material, the nimeralogy and bulk compositions of 30 mm-sized, fine-grained objects in Tieschitz (h3.6), Sharps (H3.4), Allan Hills A77299 (H3.7), Yamato 74191 (L3.6), Semarkona (LL3.0), and St. Mary's Co. (LL3.3) were studied. All are composed of submicron to micron sized material and may contain larger mineral fragments. Three texturally and mineralogically distinct types of objects were identified; all are minor components of the chondrites studied ( 1% except Sharps where melt-breccia-textured objects are approximately minus 1%). Bulk compositions of network and melt-breccia-textured objects define a rather narrow trend on a plot of Si/Al vs. Mg/Al, emphasizing a possible genetic relationship. Data show that Si/Mg is higher for network and melt-breccia-textured objects than for porphyritic and barred olivine chondrules. Melting in vaccuo of network-textured objects would cause a loss of Si relative to Mg (3), suggesting that material compositionally similar to fine grained objects could have been precursors to some chondrules.

Recca, S. I.↗